/// <summary>
/// Performs the configuration of the RSG45 HART Communication DTM
/// </summary>
/// <returns>
/// <br>True: if configuration was successful</br>
/// <br>False: if configuration was unsuccessful or errors occurred</br>
/// </returns>
public bool Run(Communication communication)
{
/* Class initialization
*/
var parser = new Functions.ApplicationArea.Execution.SettingParser();
var clickApply = new SpecificFlows.ClickButtonApply();
var isApplyEnabled = new SpecificFlows.IsApplyButtonEnabled();
var setEndAddress = new SpecificFlows.SetEndAddress();
var setStartAddress = new SpecificFlows.SetStartAddress();
var setIPAddress = new SpecificFlows.SetIPAddress();
var setPort = new SpecificFlows.SetPort();
var setTimeout = new SpecificFlows.SetTimeout();
var isModuleReady = new Functions.ApplicationArea.Validation.WaitUntilModuleIsReady();
List <bool> executionResults = new List <bool>();
bool isDefaultConfig = false;
string commUnit = communication.CommunicationHardwareName;
/* Precondition:
* Check communication for settings and set bools accordingly:
* Check for start address
* Check for end address
*
* If not found, do a default scan from 0 to 0
*/
if (string.IsNullOrEmpty(commUnit))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Communication Unit value is null. Not possible to configure correctly");
return(false);
}
//default config
if (communication.CommunicationSettings.Count == 0)
{
isDefaultConfig = true;
}
/* Execution:
* 1) Check if module is ready
* 2) set the ip
* 3) Set port, start/end address and timeout, if flags are set in preconditions
* 4) Click button apply
*/
if (isModuleReady.Run(30000))
{
if (setIPAddress.Run(commUnit))
{
if (isApplyEnabled.Run())
{
if (!isDefaultConfig)
{
bool result = true;
// do extended config
foreach (var st in communication.CommunicationSettings)
{
if (st.SettingValue != "")
{
switch (parser.Parse(st.SettingName))
{
case "start address":
executionResults.Add(setStartAddress.Run(st.SettingValue));
break;
case "end address":
executionResults.Add(setEndAddress.Run(st.SettingValue));
break;
case "timeout":
executionResults.Add(setTimeout.Run(st.SettingValue));
break;
case "port":
executionResults.Add(setPort.Run(st.SettingValue));
break;
}
}
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The value for the setting " + st.SettingName + " is empty. Skipping configuration for this setting");
}
// check for execution results
for (int i = 0; i < executionResults.Count; i++)
{
if (!executionResults[i])
{
result = false;
}
}
if (result)
{
if (clickApply.Run())
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished without errors");
return(true);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Apply button is not enabled. Cannot save configuration");
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished with errors");
int failCounter = 0;
foreach (var bla in executionResults)
{
if (!bla)
{
failCounter++;
}
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), string.Format("{0} out of {1} configurations finished with status failed", failCounter, executionResults.Count));
clickApply.Run();
return(false);
}
else
{
if (clickApply.Run())
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished without errors");
return(true);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Apply button is not enabled. Cannot save configuration");
return(false);
}
}
else
{
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Apply button is not enabled though a parameter was already changed");
return(false);
}
}
else
{
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "IP was not correctly set");
return(false);
}
}
else
{
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Module was not ready in time");
return(false);
}
}
/// <summary>
/// Performs the configuration of the PROFIdtmDPV1 Communication DTM
/// </summary>
/// <param name="communication">
/// The communication.
/// </param>
/// <returns>
/// <br>True: if configuration was successful</br>
/// <br>False: if configuration was unsuccessful or errors occurred</br>
/// </returns>
public bool Run(Communication communication)
{
/* Class initialization */
var setBoard = new SpecificFlows.SetBoardName();
var setBaudRate = new SpecificFlows.SetBaudRate();
var setStartAddress = new SpecificFlows.SetStartAddress();
var setEndAddress = new SpecificFlows.SetEndAddress();
var setHighestStationAddress = new SpecificFlows.SetHighestStationAddress();
var setStationAddress = new SpecificFlows.SetStationAddress();
var pressOk = new SpecificFlows.ClickButtonOk();
var pressDefaults = new SpecificFlows.ClickButtonDefaults();
var pressCancel = new SpecificFlows.ClickButtonCancel();
var pressApply = new SpecificFlows.ClickButtonApply();
var waitForReady = new Functions.ApplicationArea.Validation.WaitUntilModuleIsReady();
var parser = new Functions.ApplicationArea.Execution.SettingParser();
string commUnit = communication.CommunicationHardwareName;
string baudRate = string.Empty;
string stationAddress = string.Empty;
string highestStationAddress = string.Empty;
string startAddress = string.Empty;
string endAddress = string.Empty;
bool baudRateSet = false;
bool stationAddressSet = false;
bool highestStationAddressSet = false;
bool startAddressSet = false;
bool endAddressSet = false;
bool defaultConfig = false;
/* Preconditions:
* Check if commUnit is nullOrEmpty
* Check for communication settings:
* Baud Rate, Station Address, Highest Station Address, Start Address, End Address
*
* If no comm settings are present -> click defaults, set board and finish
*/
if (communication.CommunicationSettings.Count <= 0)
{
defaultConfig = true;
}
else
{
foreach (CommunicationSetting cs in communication.CommunicationSettings)
{
if (parser.Parse(cs.SettingName) == "baud rate")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
baudRateSet = true;
baudRate = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Baud Rate\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "station address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
stationAddressSet = true;
stationAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Station Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "highest station address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
highestStationAddressSet = true;
highestStationAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Highest Station Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "start address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
startAddressSet = true;
startAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"Start Address\" exists but value is empty and will therefore be skipped");
}
}
if (parser.Parse(cs.SettingName) == "end address")
{
if (!string.IsNullOrEmpty(cs.SettingValue))
{
endAddressSet = true;
endAddress = cs.SettingValue;
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "A configuration for \"End Address\" exists but value is empty and will therefore be skipped");
}
}
}
}
/* Execution:
* 1) Check if module is ready
* 2) check if default flag is set, if so -> default config (press defaults, set board, apply, ok)
* 3) Set link device
* 4) Click button OK
*/
if (waitForReady.Run(30000))
{
if (setBoard.Run(commUnit))
{
if (defaultConfig)
{
// default config
pressDefaults.Run();
pressApply.Run();
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Default Configuration finished without errors");
return(true);
}
bool result = true;
if (baudRateSet)
{
if (setBaudRate.Run(baudRate))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Baud rate " + baudRate + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Baud rate " + baudRate + " not correctly set");
result = false;
}
}
if (stationAddressSet)
{
if (setStationAddress.Run(stationAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Station address " + baudRate + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Station address " + baudRate + " not correctly set");
result = false;
}
}
if (highestStationAddressSet)
{
if (setHighestStationAddress.Run(highestStationAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Highest station address " + highestStationAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Highest station address " + highestStationAddress + " not correctly set");
result = false;
}
}
if (startAddressSet)
{
if (setStartAddress.Run(startAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Start address " + startAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Start address " + startAddress + " not correctly set");
result = false;
}
}
if (endAddressSet)
{
if (setEndAddress.Run(endAddress))
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "End address " + endAddress + " correctly set");
}
else
{
Log.Info(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "End address " + endAddress + " not correctly set");
result = false;
}
}
if (result)
{
Log.Success(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished without errors");
pressApply.Run();
return(true);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Configuration finished with errors");
pressApply.Run();
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "The board could not be set. Terminating the configuration");
return(false);
}
Log.Error(LogInfo.Namespace(MethodBase.GetCurrentMethod()), "Module was not ready in time. Terminating the configuration");
return(false);
}
