private void setddl(string workshop, string eqp)
{
//膜的等级
CRUD.Setdll(ddlFilmLevel, "FilmLevel");
CRUD.Setdll(ddlWorkshop, "workshop");
//ddlWorkshop.SelectedIndex = 0;
ddlWorkshop.ClearSelection();
ddlWorkshop.Items.FindByValue(workshop).Selected = true;
ddlEqp.ClearSelection();
CRUD.SetEqpDDL(ddlEqp, ddlWorkshop.SelectedValue, "M35");//获取UV成型的eqp
ddlEqp.Items.FindByValue(eqp).Selected = true;
#region //检验结果======================================================
FilmCRUD.setDDLQCResult(ddlAppearanceResult);
FilmCRUD.setDDLQCResult(ddlAvailableWidthResult);
FilmCRUD.setDDLQCResult(ddlBaigeResult);
FilmCRUD.setDDLQCResult(ddlBucklingResult);
FilmCRUD.setDDLQCResult(ddlLinesResult);
FilmCRUD.setDDLQCResult(ddlMDHazeResult);
FilmCRUD.setDDLQCResult(ddlParticleResult);
FilmCRUD.setDDLQCResult(ddlPenetranceResult);
FilmCRUD.setDDLQCResult(ddlThinknessResult);
FilmCRUD.setDDLQCResult(ddltxtPencilHardnessResult);
#endregion
}
protected void btnEnter_Click(object sender, EventArgs e)
{
string originalLot = "";
//判断是否是UV成型的条码
string check = CRUD.CheckFilmLabel("UV成型", txtLot.Text);
if (check != "fail")
{
originalLot = check;
}
else
{
originalLot = txtLot.Text;
}
ViewState["originalLot"] = originalLot;
//查询是否可以过站
string result = CRUD.QueryStationOfLot(lblWorksiteID.Text, originalLot);
if (result != "success")
{
JScript.Alert(result, this);
txtLot.Text = "";
return;
}
DataTable lotDt = CRUD.GetLotBasisInfo(originalLot);
string workshop = lotDt.Rows[0]["workshopID"].ToString();
//膜等级
//txtFilmLevel.Text = lotDt.Rows[0]["mouldlevel"].ToString();
setddl(workshop);
string WO = lotDt.Rows[0]["workorder"].ToString();
//显示批次长宽信息
txtPreWidth.Text = lotDt.Rows[0]["mouldwidth"].ToString();
//txtPreLength.Text = lotDt.Rows[0]["mouldlength"].ToString();
//=======================前站长度显示改为有效长度 modify by lei.xue on 2017-6-12=================================================
txtPreLength.Text = lotDt.Rows[0]["validlength"].ToString();
txtLevel.Text = lotDt.Rows[0]["filmlevel"].ToString();
//======================标签宽度改为取有效宽幅 modify by lei.xue on 2017-5-22========================================
txtValidWidth.Text = lotDt.Rows[0]["validwidth"].ToString();
//显示工单信息
SetWOinfo(WO);
//显示打印标签时间
string[] LabelTime = FilmCRUD.GetLabelTime(txtLot.Text);
txtSubsectionDate.Text = LabelTime[0];
txtPasteFilmDate.Text = LabelTime[1];
txtUVCompleteDate.Text = LabelTime[2];
CRUD.setLabelProcess(lblLotprocess, lblCurrnentWorksite, lblEndProcess, ViewState["originalLot"].ToString(), lblWorksiteID.Text);
}
protected void btnMouldLot_Click(object sender, EventArgs e)
{
//模具编号
string MouldLot = "";
#region 判断条码是否有效
if (txtMouldLot.Text.Length > 3)
{
//外发或资产条码是否打印 条码第四位判断：W或Z
if (txtMouldLot.Text.Substring(3, 1).ToString() == "W")
{
if (CRUD.CheckMouldLabel("W", txtMouldLot.Text) == "fail")
{
JScript.Alert("该条码为打印！", this);
return;
}
}
else if (txtMouldLot.Text.Substring(3, 1).ToString() == "Z")
{
if (CRUD.CheckMouldLabel("Z", txtMouldLot.Text) == "fail")
{
JScript.Alert("该条码未打印！", this);
return;
}
}
MouldLot = txtMouldLot.Text.Substring(0, 3).ToString();
}
else
{
MouldLot = txtMouldLot.Text;
}
#endregion
DataTable dt = null;
string result = FilmCRUD.GetMouldInfo(MouldLot, "M20", ref dt);
if (result == "success")
{
for (int i = 0; i < dt.Rows.Count; i++)
{
if (dt.Rows[i]["paratype"].ToString() == "Haze")
{
txtHaze.Text = dt.Rows[i]["paraid"].ToString();
}
}
}
else
{
JScript.Alert("该模具未完成喷砂站点", this);
}
}
protected void btnEnter_Click(object sender, EventArgs e)
{
//判断是否是UV成型的条码
//string check = CRUD.CheckFilmLabel("UV成型", txtLot.Text);
//if (check == "fail")
//{
// JScript.Alert("条码未打印", this);
// return;
//}
string originalLot = txtLot.Text;
ViewState["originalLot"] = originalLot;
//查询是否可以过站
string result = CRUD.QueryStationOfLot(lblWorksiteID.Text, originalLot);
if (result != "success")
{
JScript.Alert(result, this);
txtLot.Text = "";
return;
}
DataTable lotDt = CRUD.GetLotBasisInfo(originalLot);
//string workshop = lotDt.Rows[0]["workshopID"].ToString();
//膜等级
txtFilmLevel.Text = lotDt.Rows[0]["filmlevel"].ToString();
////查询UV成型站的eqp信息 add by lei.xue on 2017-2-21
//lotDt = null;
//lotDt = CRUD.getStationInfo(originalLot, "M50");
string UVCompleteEqp = lotDt.Rows[0]["eqpid"].ToString();
string workshop = lotDt.Rows[0]["workshopid"].ToString();
setddl(workshop, UVCompleteEqp);
//string WO = lotDt.Rows[0]["workorder"].ToString();
#region 批次流程
//查询批次流程
CRUD.setLabelProcess(lblLotprocess, lblCurrnentWorksite, lblEndProcess, originalLot, lblWorksiteID.Text);
#endregion
//检查流程是否包含分条站点
if (FilmCRUD.QuerySubsectionFlowID(txtLot.Text) == "fail")
{
CbxChangeFlow.Enabled = false;
}
}
private void setddl(string workshop, string eqp)
{
//膜的等级
CRUD.Setdll(ddlFilmLevel, "FilmLevel");
CRUD.Setdll(ddlWorkshop, "workshop");
//ddlWorkshop.SelectedIndex = 0;
ddlWorkshop.ClearSelection();
ddlWorkshop.Items.FindByValue(workshop).Selected = true;
ddlEqp.ClearSelection();
CRUD.SetEqpDDL(ddlEqp, ddlWorkshop.SelectedValue, "M55");//获取贴膜成型的eqp
ddlEqp.Items.FindByValue(eqp).Selected = true;
#region //检验结果======================================================
FilmCRUD.setDDLQCResult(ddlAppearanceResult);
#endregion
}
protected void btnEnter_Click(object sender, EventArgs e)
{
//查询是否可以过站
string result = CRUD.QueryStationOfLot(lblWorksiteID.Text, txtLot.Text);
if (result != "success")
{
JScript.Alert(result, this);
txtLot.Text = "";
return;
}
DataTable lotDt = CRUD.GetLotBasisInfo(txtLot.Text);
string workshop = lotDt.Rows[0]["workshopID"].ToString();
setddl(workshop);
string WO = lotDt.Rows[0]["workorder"].ToString();
CRUD.setLabelProcess(lblLotprocess, lblCurrnentWorksite, lblEndProcess, txtLot.Text, lblWorksiteID.Text);
FilmCRUD.GetPreLengthAndWidth(txtPreLength, txtPreWidth, txtLot.Text, lblWorksiteID.Text, WO, "");
}
protected void btnSaveClose_Click(object sender, EventArgs e)
{
#region//分批条码改为可以手动输入，判断条码是否已经存在 add by lei.xue on 2017-11-8
string strExistSubLot = FilmCRUD.ExistSublot(txtLot.Text, txtLabelInfo.Text);
if (strExistSubLot == "success")
{
JScript.Alert("该分批条码已经存在", this);
return;
}
#endregion
//插入basis表 ， 更新母批剩余数量 ，子批flowidno为当点站
string SplitLength = "";
if (cbxSplit.Checked == true)
{
SplitLength = txtSplitLength.Text;
}
else
{
//母批直接分批的时候改为分批长度取剩余长度 modify by lei.xue on 2017-8-19
//SplitLength = txtPreLength.Text;
SplitLength = txtRestLength.Text;
}
LotBasisDatalist dl = new LotBasisDatalist();
DataTable dt = (DataTable)ViewState["lotDt"];
dl.flowid = dt.Rows[0]["flowid"].ToString();
dl.workshopid = ddlWorkshop.SelectedValue;
dl.lottype = "Film";
dl.status = "Active";
dl.createuser = System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString();
dl.currentflowidno = (Convert.ToInt32(dt.Rows[0]["flowidno"].ToString()) + 1).ToString(); //流程编号加1
dl.factoryid = "";
dl.workorder = ViewState["WO"].ToString();
dl.reworkorder = "";
dl.lotid = txtLabelInfo.Text;
dl.lotcount = dt.Rows[0]["lotcount"].ToString();
dl.ProcessComplete = "N";
dl.UVCompleteLotid = txtLot.Text;
dl.length = SplitLength; //txtSplitLength.Text;
//================剩余长度和宽度为母批的有效长度和宽度modify by lei.xue on 2017-6-1=============
dl.restlength = txtValidLength.Text; //SplitLength;//txtSplitLength.Text;
dl.width = txtPreWidth.Text;
dl.restwidth = txtValidWidth.Text; //txtPreWidth.Text;
dl.Filmlevel = "A";
//增加贴膜设备编号 add by lei.xue on 2017-2-22
dl.eqpid = ddlEqp.SelectedValue;
//增加有效幅宽 add by lei.xue on 2017-4-19
dl.validwidth = txtValidWidth.Text;
//增加有效长度 add by lei.xue on 2017-6-11
dl.validlength = txtValidLength.Text;
string result = CreateMouldLot.InsertLot(dl);
if (result != "success")
{
JScript.Alert(result, this);
return;
}
//插入分批记录到分批表
dl.sublotid = txtLabelInfo.Text;
dl.lotid = txtLot.Text;
string resultsplit = PasteFilm.InsertSplitLot(dl);
//更新母批剩余数量
Decimal rest = Convert.ToDecimal(txtRestLength.Text) - Convert.ToDecimal(SplitLength);//txtSplitLength.Text );
string strRest = PasteFilm.UpdateParentQty(ViewState["originalLot"].ToString(), rest.ToString(), "Length");
if (strRest != "success")
{
JScript.Alert("更新母批剩余数量失败！", this);
return;
}
if (result != "success" || resultsplit != "success")
{
JScript.Alert("创建贴膜条码失败！", this);
return;
}
//子批过站记录 add by lei.xue on 2017-4-26=========================================
string strWipinfo = PasteFilm.FilmCheckOut(txtLabelInfo.Text, ddlEqp.SelectedValue, ddlWorkshop.SelectedValue, lblWorksiteID.Text, System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString());
if (strWipinfo == "fail")
{
JScript.Alert("子批过站记录失败！", this);
return;
}
ClientScript.RegisterStartupScript(ClientScript.GetType(), "myscript", "<script>PrintLabel('" + txtLabelInfo.Text + "','../Product/PasteFilm.aspx','" + txtProductType.Text + "');</script>");
//JScript.Alert("创建贴膜条码成功！", this);
}
private void CheckPackage()
{
string originalLot = "";
//判断是否是UV成型的条码
string check = CRUD.CheckFilmLabel("UV成型", txtLot.Text);
if (check != "fail")
{
originalLot = check;
}
else
{
originalLot = txtLot.Text;
}
ViewState["originalLot"] = originalLot;
DataTable lotDt = CRUD.GetLotBasisInfo(originalLot);
if (lotDt.Rows.Count == 0)
{
JScript.Alert("未找到条码信息", this);
return;
}
string isPackage = lotDt.Rows[0]["package"].ToString();
if (isPackage != "Y")
{
JScript.Alert("批次未包装", this);
return;
}
string workshop = lotDt.Rows[0]["workshopID"].ToString();
//膜等级
//txtFilmLevel.Text = lotDt.Rows[0]["mouldlevel"].ToString();
//setddl(workshop);
string WO = lotDt.Rows[0]["workorder"].ToString();
//显示批次长宽信息
txtPreWidth.Text = lotDt.Rows[0]["mouldwidth"].ToString();
//前站长度改为有效长度 modify by lei.xue on 2017-10-19
//txtPreLength.Text = lotDt.Rows[0]["mouldlength"].ToString();
txtPreLength.Text = lotDt.Rows[0]["validlength"].ToString();
txtLevel.Text = lotDt.Rows[0]["filmlevel"].ToString();
//增加有效幅宽
txtValidWidth.Text = lotDt.Rows[0]["validwidth"].ToString();
lotDt = null;
lotDt = Package.GetPackaInfo(originalLot);
if (lotDt.Rows.Count > 0)
{
txtPinHao.Text = lotDt.Rows[0]["PinHao"].ToString();
txtAfterPackageWeight.Text = lotDt.Rows[0]["AfterPackageWeight"].ToString();
txtBeforePackageWeight.Text = lotDt.Rows[0]["BeforePackageWeight"].ToString();
}
else
{
JScript.Alert("未查询到品号", this);
}
//显示打印标签时间
string[] LabelTime = FilmCRUD.GetLabelTime(txtLot.Text);
txtSubsectionDate.Text = LabelTime[0];
txtPasteFilmDate.Text = LabelTime[1];
txtUVCompleteDate.Text = LabelTime[2];
//显示工单信息
SetWOinfo(WO);
//批次已过站点
string WorksiteIDOfLot = CRUD.GetWorksite(originalLot);
//查询批次流程
string strFlow = "";
DataTable dt = CRUD.GetWorkflow(originalLot);
for (int i = 0; i < dt.Rows.Count; i++)
{
if (WorksiteIDOfLot == dt.Rows[i]["worksiteID"].ToString())
{
strFlow = strFlow + "[" + dt.Rows[i]["worksitename"].ToString() + "]" + "->";
}
else
{
strFlow = strFlow + dt.Rows[i]["worksitename"].ToString() + "->";
}
}
if (strFlow != "")
{
strFlow = strFlow.Remove((strFlow).Length - 2, 2);
}
lblLotprocess.Text = strFlow;
}
protected void btnSaveClose_Click(object sender, EventArgs e)
{
//string result = UVComplete.FilmCheckOut(txtLot.Text,
// txtLabelInfo.Text,
// ddlEqp.SelectedValue,
// ddlWorkshop.SelectedValue,
// lblWorksiteID.Text,
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// txtPreLength.Text,
// txtPreWidth.Text,
// txtRestLength.Text,
// txtSplitLength.Text,
// txtMouldLot.Text,
// txtDKWidth.Text,
// txtMouldStructure.Text,
// txtMouldPitch.Text,
// ddlGlueType.SelectedValue
// );
//if (result == "success")
//{
// JScript.Alert("UV成型过站成功！", this);
// //ClearInfo();
// //打印标签调用前台方法
// //ClientScript.RegisterStartupScript(ClientScript.GetType(), "myscript", "<script>PrintLabel();</script>");
// ClientScript.RegisterStartupScript(ClientScript.GetType(), "myscript", "<script>PrintLabel('" + txtLabelInfo.Text + "','../Product/UVComplete.aspx');</script>");
// return;
//}
//else
//{
// JScript.Alert("UV成型过站失败！", this);
// return;
//}
#region//分批条码改为手动输入，判断条码是否已经存在 add by lei.xue on 2017-4-18
string strExistSubLot = FilmCRUD.ExistSublot(txtLot.Text, txtLabelInfo.Text);
if (strExistSubLot == "success")
{
JScript.Alert("该分批条码已经存在", this);
return;
}
#endregion
#region//插入basis表 ， 更新母批剩余数量 ，子批flowidno为当点站===========================================
//==============不分批子批长度取母批的长度 modify by lei.xue on 2017-5-28==================================
string SplitLength = "";
if (cbxSplit.Checked == true)
{
SplitLength = txtSplitLength.Text;
}
else
{
//母批直接分批的时候改为分批长度取剩余长度 modify by lei.xue on 2017-8-19
//SplitLength = txtPreLength.Text;
SplitLength = txtRestLength.Text;
}
LotBasisDatalist dl = new LotBasisDatalist();
DataTable dt = (DataTable)ViewState["lotDt"];
dl.flowid = dt.Rows[0]["flowid"].ToString();
dl.workshopid = ddlWorkshop.SelectedValue;
dl.lottype = "Film";
dl.status = "Active";
dl.createuser = System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString();
dl.currentflowidno = (Convert.ToInt32(dt.Rows[0]["flowidno"].ToString()) + 1).ToString(); //流程编号加1
dl.factoryid = "";
dl.workorder = ViewState["WO"].ToString();
dl.reworkorder = "";
dl.lotid = txtLabelInfo.Text;
dl.lotcount = dt.Rows[0]["lotcount"].ToString();
dl.ProcessComplete = "N";
//dl.UVCompleteLotid = txtLot.Text;
dl.length = SplitLength; //txtSplitLength.Text;
//================剩余长度和宽度为母批的有效长度和宽度modify by lei.xue on 2017-6-1=============
dl.restlength = txtValidLength.Text; //SplitLength;//txtSplitLength.Text;
dl.width = txtPreWidth.Text;
dl.restwidth = txtValidWidth.Text; //txtPreWidth.Text;
dl.Filmlevel = "A";
dl.eqpid = ddlEqp.SelectedValue;
//增加有效幅宽 add by lei.xue on 2017-4-18=================================================
dl.validwidth = txtValidWidth.Text;
//================增加有效长度 add by lei.xue on 2017-5-28=================================
dl.validlength = txtValidLength.Text;
string result = CreateMouldLot.InsertLot(dl);
if (result != "success")
{
JScript.Alert(result, this);
return;
}
#endregion
#region//插入分批记录到分批表===============================================================
dl.sublotid = txtLabelInfo.Text;
dl.lotid = txtLot.Text;
string resultsplit = PasteFilm.InsertSplitLot(dl);
#endregion
#region//更新母批剩余数量===================================================================
Decimal rest = Convert.ToDecimal(txtRestLength.Text) - Convert.ToDecimal(SplitLength);
string strRest = PasteFilm.UpdateParentQty(txtLot.Text, rest.ToString(), "Length");
if (strRest != "success")
{
JScript.Alert("更新母批剩余数量失败！", this);
return;
}
#endregion
#region//记录绑定的模具信息和胶水规格 modify by lei.xue on 2017-3-27================================
string resultWipInfo = UVComplete.FilmCheckOut(txtLabelInfo.Text,
"",
ddlEqp.SelectedValue,
ddlWorkshop.SelectedValue,
lblWorksiteID.Text,
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
txtMouldLot.Text,
txtDKWidth.Text,
txtMouldStructure.Text,
txtMouldPitch.Text,
ddlGlueType.SelectedValue
);
if (strRest != "success")
{
JScript.Alert("记录绑定的模具信息和胶水规格失败！", this);
return;
}
#endregion
if (result != "success" || resultsplit != "success")
{
JScript.Alert("创建UV成型条码失败！", this);
return;
}
//ClientScript.RegisterStartupScript(ClientScript.GetType(), "myscript", "<script>PrintLabel('" + txtLabelInfo.Text + "','../Product/UVComplete.aspx');</script>");
ClientScript.RegisterStartupScript(ClientScript.GetType(), "myscript", "<script>PrintLabel('" + txtLabelInfo.Text + "','../Product/UVComplete.aspx','" + txtProductType.Text + "');</script>");
}
protected void btnSaveClose_Click(object sender, EventArgs e)
{
//string result = CRUD.FilmCheckOut(ViewState["originalLot"].ToString(), txtLot.Text, ddlEqp.SelectedValue, ddlWorkshop.SelectedValue,
// lblWorksiteID.Text,
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// ddlFilmLevel.SelectedValue);
//string resultLevel = "";
//if (cbxUpdateLevel.Checked == true)
//{
// resultLevel = CRUD.updateFilmLevel(txtFilmLevel.Text,
// ddlFilmLevel.SelectedValue,
// ViewState["originalLot"].ToString(),
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// lblWorksiteID.Text
// );
//}
string strCheck = ""; //存放检验结果变量
string strFilmLevel = ""; //模具等级变量
string result = CRUD.FilmCheckOut(ViewState["originalLot"].ToString(), txtLot.Text, ddlEqp.SelectedValue, ddlWorkshop.SelectedValue,
lblWorksiteID.Text,
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
ddlFilmLevel.SelectedValue);
string resultLevel = "";
if (cbxUpdateLevel.Checked == true)//膜检验结果为NG
{
strCheck = "NG";
strFilmLevel = ddlFilmLevel.SelectedValue;
resultLevel = CRUD.updateFilmLevel(txtFilmLevel.Text,
ddlFilmLevel.SelectedValue,
ViewState["originalLot"].ToString(),
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
lblWorksiteID.Text
);
}
else
{
strCheck = "OK";
strFilmLevel = txtFilmLevel.Text;
}
#region//检验项目=====================================================================================
AGCoatingQCDatalist Datalist = new AGCoatingQCDatalist();
//外观
//1外观左
Datalist.appearanceleft = txtAppearanceLeft.Text;
//2外观右
Datalist.appearanceright = txtAppearanceRight.Text;
Datalist.appearanceresult = ddlAvailableWidthResult.SelectedValue;
//可用宽幅
Datalist.availablewidth = txtAvailableWidth.Text;
Datalist.availablewidthresult = ddlAvailableWidthResult.SelectedValue;
//纹路
Datalist.lines = txtLines.Text;
Datalist.linesresult = ddlLinesResult.Text;
//正面保护膜张力
Datalist.FrontTension = txtFrontTension.Text;
Datalist.FrontTensionResult = ddlFrontTensionResult.Text;
//背面保护膜张力
Datalist.BackTension = txtBackTension.Text;
Datalist.BackTensionResult = ddlBackTensionResult.Text;
//点线
Datalist.dotline = txtDotLine.Text;
Datalist.dotlineResult = ddlDotLineResult.Text;
//string QCResult = AGCoatingCheck.CheckInfo(txtLot.Text,
// ddlEqp.SelectedValue,
// lblWorksiteID.Text,
// strCheck,
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// strFilmLevel,
// Datalist
// );
string QCResult = PasteFilmCheck.CheckInfo(txtLot.Text,
ddlEqp.SelectedValue,
lblWorksiteID.Text,
strCheck,
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
strFilmLevel,
Datalist
);
if (QCResult == "fail")
{
JScript.Alert("记录检验项目失败", this);
return;
}
#endregion
//跳分条流程
if (CbxChangeFlow.Checked == true)
{
string UpdataFlow = "";
UpdataFlow = FilmCRUD.QuerySubsectionFlowID(txtLot.Text);
string resultFlow = CRUD.ChangLotWorkflow(UpdataFlow, txtLot.Text);
if (resultFlow != "success")
{
JScript.Alert("变更产品流程出错！", this);
return;
}
}
if (result == "success" && resultLevel != "fail")
{
//JScript.Alert("UV成型检验过站成功！", this);
JScript.AlertAndRedirect("贴膜检验过站成功！", "PasteFilmCheck.aspx", this);
//ClearInfo();
return;
}
else
{
JScript.Alert("贴膜检验过站失败！", this);
return;
}
}
protected void btnSaveClose_Click(object sender, EventArgs e)
{
//string result = CRUD.FilmCheckOut(ViewState["originalLot"].ToString(), txtLot.Text, ddlEqp.SelectedValue, ddlWorkshop.SelectedValue,
// lblWorksiteID.Text,
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// ddlFilmLevel.SelectedValue);
//string resultLevel = "";
//if (cbxUpdateLevel.Checked == true)
//{
// resultLevel = CRUD.updateFilmLevel(txtFilmLevel.Text,
// ddlFilmLevel.SelectedValue,
// ViewState["originalLot"].ToString(),
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// lblWorksiteID.Text
// );
//}
string strCheck = ""; //存放检验结果变量
string strFilmLevel = ""; //模具等级变量
string result = CRUD.FilmCheckOut(ViewState["originalLot"].ToString(), txtLot.Text, ddlEqp.SelectedValue, ddlWorkshop.SelectedValue,
lblWorksiteID.Text,
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
ddlFilmLevel.SelectedValue);
string resultLevel = "";
if (cbxUpdateLevel.Checked == true)//膜检验结果为NG
{
strCheck = "NG";
strFilmLevel = ddlFilmLevel.SelectedValue;
resultLevel = CRUD.updateFilmLevel(txtFilmLevel.Text,
ddlFilmLevel.SelectedValue,
ViewState["originalLot"].ToString(),
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
lblWorksiteID.Text
);
}
else
{
strCheck = "OK";
strFilmLevel = txtFilmLevel.Text;
}
#region//检验项目=====================================================================================
AGCoatingQCDatalist Datalist = new AGCoatingQCDatalist();
//厚度
Datalist.thinknessleft = txtThinknessLeft.Text;
Datalist.thinknessmiddle = txtThinknessMiddle.Text;
Datalist.thinknessright = txtThinknessRight.Text;
Datalist.thinknessresult = ddlThinknessResult.SelectedValue;
//翘曲变形
Datalist.buckling = txtBuckling.Text;
Datalist.bucklingresult = ddlBucklingResult.SelectedValue;
//MD雾度
Datalist.MDhaze = txtMDHaze.Text;
Datalist.MDhazeresult = ddlMDHazeResult.SelectedValue;
//MD穿透率
Datalist.MDpenetration = txtPenetrance.Text;
Datalist.MDpenetrationresult = ddlPenetranceResult.SelectedValue;
//增加TD雾度和穿透率 add by lei.xue on 2017-4-18==========================================
//TD雾度
Datalist.TDhaze = txtTDHaze.Text;
Datalist.TDhazeresult = ddlTDHazeResult.SelectedValue;
//TD穿透率
Datalist.TDpenetration = txtTDPenetrance.Text;
Datalist.TDpenetrationresult = ddlTDPenetranceResult.SelectedValue;
//外观
//1外观左
Datalist.appearanceleft = txtAppearanceLeft.Text;
//2外观右
Datalist.appearanceright = txtAppearanceRight.Text;
Datalist.appearanceresult = ddlAvailableWidthResult.SelectedValue;
//可用宽幅
Datalist.availablewidth = txtAvailableWidth.Text;
Datalist.availablewidthresult = ddlAvailableWidthResult.SelectedValue;
//纹路
Datalist.lines = txtLines.Text;
Datalist.linesresult = ddlLinesResult.Text;
//高低差
//1dH
Datalist.HeightDifferenceDH = txtHeightDifferenceDH.Text;
//2Rz
Datalist.HeightDifferenceRz = txtHeightDifferenceRZ.Text;
Datalist.HeightDifferenceResult = ddlHeightDifferenceResult.SelectedValue;
//百格
Datalist.baige = txtBaige.Text;
Datalist.baigeresult = ddlBaigeResult.SelectedValue;
//铅笔硬度正面
Datalist.pencilhardnessFront = txtPencilHardnessFront.Text;
Datalist.pencilhardnessFrontresult = ddlPencilHardnessFrontResult.SelectedValue;
//铅笔硬度背面
Datalist.pencilhardnessBack = txtPencilHardnessBack.Text;
Datalist.pencilhardnessBackresult = ddlPencilHardnessBackResult.SelectedValue;
//辉度增益比
Datalist.brilliancy = txtBrilliancy.Text;
Datalist.brilliancyResult = ddlBrilliancyResult.SelectedValue;
//string QCResult = AGCoatingCheck.CheckInfo(txtLot.Text,
// ddlEqp.SelectedValue,
// lblWorksiteID.Text,
// strCheck,
// System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
// strFilmLevel,
// Datalist
// );
string QCResult = UVCompleteCheck.CheckInfo(txtLot.Text,
ddlEqp.SelectedValue,
lblWorksiteID.Text,
strCheck,
System.Web.HttpContext.Current.Request.Cookies["userID"].Value.ToString(),
strFilmLevel,
Datalist
);
if (QCResult == "fail")
{
JScript.Alert("记录检验项目失败", this);
return;
}
#endregion
//跳分条流程
if (CbxChangeFlow.Checked == true)
{
string UpdataFlow = "";
UpdataFlow = FilmCRUD.QuerySubsectionFlowID(txtLot.Text);
string resultFlow = CRUD.ChangLotWorkflow(UpdataFlow, txtLot.Text);
if (resultFlow != "success")
{
JScript.Alert("变更产品流程出错！", this);
return;
}
}
if (result == "success" && resultLevel != "fail")
{
//JScript.Alert("UV成型检验过站成功！", this);
JScript.AlertAndRedirect("UV成型检验过站成功！", "UVCompleteCheck.aspx", this);
//ClearInfo();
return;
}
else
{
JScript.Alert("UV成型检验过站失败！", this);
return;
}
}
