/// <summary> /// Exports a roof to IfcRoof. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="roof">The roof element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> /// <param name="exportRoofAsSingleGeometry">Export roof as single geometry.</param> public static void ExportRoof(ExporterIFC exporterIFC, Element roof, ref GeometryElement geometryElement, ProductWrapper productWrapper, bool exportRoofAsSingleGeometry = false) { if (roof == null || geometryElement == null) { return; } string ifcEnumType; IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType); if (roofExportType.IsUnKnown) { roofExportType = new IFCExportInfoPair(IFCEntityType.IfcRoof, ""); } MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, roof, productWrapper); IFCFile file = exporterIFC.GetFile(); Document doc = roof.Document; using (SubTransaction tempPartTransaction = new SubTransaction(doc)) { // For IFC4RV export, Roof will be split into its parts(temporarily) in order to export the roof by its parts ExporterUtil.CreateParts(roof, layersetInfo.MaterialIds.Count, ref geometryElement); bool exportByComponents = ExporterUtil.CanExportByComponentsOrParts(roof) == ExporterUtil.ExportPartAs.ShapeAspect; using (IFCTransaction tr = new IFCTransaction(file)) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, roof, out overrideContainerHnd); using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof, null, null, overrideContainerId, overrideContainerHnd)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { // If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some // in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be // used for this reason in the first place. ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ; ecData.AreInnerRegionsOpenings = true; ecData.SetLocalPlacement(placementSetter.LocalPlacement); ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof); BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); BodyData bodyData = null; IFCAnyHandle prodRep = null; IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); IList <ElementId> materialIds = new List <ElementId>(); if (!exportByComponents) { prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof, categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (bodyData != null && bodyData.MaterialIds != null) { materialIds = bodyData.MaterialIds; } } else { prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, roof, categoryId, geometryElement, representations); } if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep)) { ecData.ClearOpenings(); return; } bool exportSlab = ((ecData.ScaledLength > MathUtil.Eps() || exportByComponents) && roofExportType.ExportInstance == IFCEntityType.IfcRoof && !exportRoofAsSingleGeometry); string guid = GUIDUtil.CreateGUID(roof); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; IFCAnyHandle localPlacement = ecData.GetLocalPlacement(); IFCAnyHandle roofHnd = IFCInstanceExporter.CreateGenericIFCEntity( roofExportType, exporterIFC, roof, guid, ownerHistory, localPlacement, exportSlab ? null : prodRep); IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, roofExportType, file, ownerHistory, roofExportType.ValidatedPredefinedType, productWrapper); ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd); productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true, roofExportType); if (!(roof is RoofBase)) { CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds); } if (exportByComponents && (exportSlab || exportRoofAsSingleGeometry)) { IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, roof, prodRep, productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, ecData); } Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity; if (exportSlab) { string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart); IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement); string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1"; IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory, slabLocalPlacementHnd, prodRep, slabRoofPredefinedType); IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName); OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform, exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper); ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd); IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, slabRoofPredefinedType); productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false, slabRoofExportType); // Create type IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper); ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd); ExporterUtil.AddIntoComplexPropertyCache(slabHnd, layersetInfo); // For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage // This one is only for IFC4 and above if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4) { if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle)) { CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, layersetInfo.MaterialLayerSetHandle); } else if (bodyData != null) { CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds); } } } else { OpeningUtil.CreateOpeningsIfNecessary(roofHnd, roof, ecData, offsetTransform, exporterIFC, localPlacement, placementSetter, productWrapper); // For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage // This one is only for IFC4 and above if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4) { if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle)) { CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, layersetInfo.MaterialLayerSetHandle); } else if (layersetInfo != null && layersetInfo.MaterialIds != null) { materialIds = layersetInfo.MaterialIds.Select(x => x.m_baseMatId).ToList(); CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds); } } } } tr.Commit(); } } } }
/// <summary> /// Exports a CeilingAndFloor element to IFC. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="floor">The floor element.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, ref GeometryElement geometryElement, ProductWrapper productWrapper) { if (geometryElement == null) { return; } IFCFile file = exporterIFC.GetFile(); string ifcEnumType; IFCExportInfoPair exportType = ExporterUtil.GetProductExportType(exporterIFC, floorElement, out ifcEnumType); IFCAnyHandle type = null; if (!ElementFilteringUtil.IsElementVisible(floorElement)) { return; } // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum; if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) || Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum)) { if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } } Document doc = floorElement.Document; using (SubTransaction tempPartTransaction = new SubTransaction(doc)) { MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, floorElement, productWrapper); // For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts // If Parts are created by code and not by user then their names should be equal to Material names. bool setMaterialNameToPartName = ExporterUtil.CreateParts(floorElement, layersetInfo.MaterialIds.Count, ref geometryElement); ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(floorElement); bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect; bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part; if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false)) { return; } using (IFCTransaction tr = new IFCTransaction(file)) { bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor)); if (canExportAsContainerOrWithExtrusionAnalyzer) { // Try to export the Floor slab as a container. If that succeeds, we are done. // If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave // this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms. IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper); if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd)) { tr.Commit(); return; } } IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>(); IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>(); IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle; using (IFCTransformSetter transformSetter = IFCTransformSetter.Create()) { // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd); using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd)) { IFCAnyHandle localPlacement = placementSetter.LocalPlacement; // The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association. // Disable calling ExportSlabAsExtrusion if we can't handle potential openings. bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView; bool exportedAsInternalExtrusion = false; ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement); IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>(); IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>(); IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >(); IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>(); Plane floorPlane = GeometryUtil.CreateDefaultPlane(); IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>(); if (!exportParts) { if (canExportAsContainerOrWithExtrusionAnalyzer) { Floor floor = floorElement as Floor; // Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only. // Also limited to cases with line and arc boundaries. // SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement); IList <Solid> solids = solidMeshInfo.GetSolids(); IList <Mesh> meshes = solidMeshInfo.GetMeshes(); IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes); if (solids.Count == 1 && meshes.Count == 0) { // floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor XYZ floorExtrusionDirection = new XYZ(0, 0, -1); XYZ modelOrigin = XYZ.Zero; XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); if (floorOrigin == null) { // GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't // go through the Revit model origin. We'll try the midpoint of the bounding box instead. BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null); modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0; floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top); } if (floorOrigin != null) { XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top); Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir); GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody; additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ? GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None; // Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects() if (exportByComponents) { additionalInfo &= ~GenerateAdditionalInfo.GenerateBody; } ExtrusionExporter.ExtraClippingData extraClippingData = null; HandleAndData floorAndProperties = ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement, false, catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out extraClippingData, addInfo: additionalInfo); if (extraClippingData.CompletelyClipped) { return; } IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); if (floorAndProperties.Handle != null) { representations.Add(floorAndProperties.Handle); repTypes.Add(ShapeRepresentationType.SweptSolid); } // Footprint representation will only be exported in export to IFC4 if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null)) { IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC); representations.Add(footprintShapeRep); } if (exportByComponents) { IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations); prodReps.Add(prodRep); } else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here { IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations); prodReps.Add(prodRep); } if (floorAndProperties.Data != null) { loopExtraParams.Add(floorAndProperties.Data); } } } } // Use internal routine as backup that handles openings. if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents) { exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement, geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps, out extrusionLoops, out loopExtraParams, floorPlane); PotentiallyFixPresentationLayerAssignment(floorElement, prodReps); for (int ii = 0; ii < prodReps.Count; ii++) { // all are extrusions repTypes.Add(ShapeRepresentationType.SweptSolid); // Footprint representation will only be exported in export to IFC4 if (ExporterCacheManager.ExportOptionsCache.ExportAs4) { if (extrusionLoops.Count > ii) { if (extrusionLoops[ii].Count > 0) { // Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]); IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal); IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint"); ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>(); repItem.Add(footprintGeomRepItem); IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem); IList <IFCAnyHandle> reps = new List <IFCAnyHandle>(); reps.Add(footprintShapeRepresentation); IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps); } } } } } IFCAnyHandle prodDefHnd; if (prodReps.Count == 0) { if (exportByComponents) { prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null); prodReps.Add(prodDefHnd); } else { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { // Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium); BodyData bodyData; prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData); if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd)) { ecData.ClearOpenings(); return; } prodReps.Add(prodDefHnd); repTypes.Add(bodyData.ShapeRepresentationType); } } } } // Create the slab from either the extrusion or the BRep information. string ifcGUID = GUIDUtil.CreateGUID(floorElement); int numReps = exportParts ? 1 : prodReps.Count; // Deal with a couple of cases that have non-standard defaults. switch (exportType.ExportInstance) { case IFCEntityType.IfcCovering: exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING"); break; case IFCEntityType.IfcSlab: bool isBaseSlab = false; #pragma warning disable CS0612, CS0618//AnalyticalModel is obsolette AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel(); if (analyticalModel != null) { AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs(); isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat); } exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR"); break; #pragma warning restore CS0612, CS0618 } for (int ii = 0; ii < numReps; ii++) { string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1)); string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID(); IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement; IFCAnyHandle slabHnd = null; slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory, localPlacementHnd, exportParts ? null : prodReps[ii]); if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd)) { return; } if (!string.IsNullOrEmpty(ifcName)) { IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName); } // Pre IFC4 Slab does not have PredefinedType if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4) { IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true); } if (exportParts) { PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null, setMaterialNameToPartName); } else if (exportByComponents) { IFCExtrusionCreationData partECData = new IFCExtrusionCreationData(); IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii], productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, partECData); loopExtraParams.Add(partECData); } slabHnds.Add(slabHnd); // For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects() if (!exportParts && !exportByComponents) { if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation) { brepSlabHnds.Add(slabHnd); } else { nonBrepSlabHnds.Add(slabHnd); } } } for (int ii = 0; ii < numReps; ii++) { IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null; productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType); type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper); ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]); ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo); } // This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not // controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View if (exportedAsInternalExtrusion) { ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects(); ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo, localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative()); ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects(); newCreatedObjects.ExceptWith(oldCreatedObjects); PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects); } } if (!exportParts) { if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(), geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type); } else { if (nonBrepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type); } if (brepSlabHnds.Count > 0) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds, geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type); } } } } tr.Commit(); return; } } }
/// <summary> /// Exports an element as IFC covering. /// </summary> /// <param name="exporterIFC">The ExporterIFC object.</param> /// <param name="element">The element to be exported.</param> /// <param name="geometryElement">The geometry element.</param> /// <param name="productWrapper">The ProductWrapper.</param> public static void ExportCovering(ExporterIFC exporterIFC, Element element, ref GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper) { // Check the intended IFC entity or type name is in the exclude list specified in the UI Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering; if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum)) { return; } ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType; IFCFile file = exporterIFC.GetFile(); MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, element, productWrapper); using (IFCTransaction transaction = new IFCTransaction(file)) { // For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts // If Parts are created by code and not by user then their name should be equal to Material name. bool setMaterialNameToPartName = ExporterUtil.CreateParts(element, layersetInfo.MaterialIds.Count, ref geomElem); ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(element); bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect; bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part; if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false)) { return; } // Check for containment override IFCAnyHandle overrideContainerHnd = null; ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd); IList <IFCAnyHandle> representations = new List <IFCAnyHandle>(); using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd)) { using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData()) { ElementId categoryId = CategoryUtil.GetSafeCategoryId(element); IFCAnyHandle prodRep = null; if (!exportParts) { ecData.SetLocalPlacement(setter.LocalPlacement); ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ; BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow); if (exportByComponents) { prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, element, categoryId, geomElem, representations); } else { prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element, categoryId, geomElem, bodyExporterOptions, null, ecData, true); } if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep)) { ecData.ClearOpenings(); return; } } // We will use the category of the element to set a default value for the covering. string defaultCoveringEnumType = null; if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings)) { defaultCoveringEnumType = "CEILING"; } else if (categoryId == new ElementId(BuiltInCategory.OST_Floors)) { defaultCoveringEnumType = "FLOORING"; } else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs)) { defaultCoveringEnumType = "ROOFING"; } string instanceGUID = GUIDUtil.CreateGUID(element); string coveringType = IFCValidateEntry.GetValidIFCPredefinedTypeType(/*element,*/ ifcEnumType, defaultCoveringEnumType, "IfcCoveringType"); IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle, setter.LocalPlacement, prodRep, coveringType); if (exportParts) { PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null, setMaterialNameToPartName); } else if (exportByComponents) { IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, element, prodRep, productWrapper, setter, setter.LocalPlacement, ElementId.InvalidElementId, layersetInfo, ecData); } ExporterUtil.AddIntoComplexPropertyCache(covering, layersetInfo); IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, IFCEntityType.IfcCoveringType, coveringType); IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, coveringType, productWrapper); ExporterCacheManager.TypeRelationsCache.Add(typeHnd, covering); bool containInSpace = false; IFCAnyHandle localPlacementToUse = setter.LocalPlacement; // Ceiling containment in Space is generally required and not specific to any view if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id)) { IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id]; // Process Ceiling to be contained in a Space only when it is exactly bounding one Space if (roomlist.Count == 1) { productWrapper.AddElement(element, covering, setter, ecData, false, exportInfo); // Modify the Ceiling placement to be relative to the Space that it bounds IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0])); Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse); Transform inverseTrf = relTrf.Inverse; IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX); IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement); GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement); ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering); containInSpace = true; } } // if not contained in Space, assign it to default containment in Level if (!containInSpace) { productWrapper.AddElement(element, covering, setter, ecData, true, exportInfo); } if (!exportParts) { Ceiling ceiling = element as Ceiling; if (ceiling != null) { HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering, geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null, null); } else { ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, element); CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId); } } OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null, exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper); } } transaction.Commit(); } }