//This test could fail because of the really long time it takes to save a workflow and close the old tab
public void TabManagerTests_CodedUI_CreateTwoWorkflowsSwitchBetween_ExpectStarNotShowingInName()
{
const string firstName = "Bug_10528";
const string secondName = "Bug_10528_InnerWorkFlow";
ExplorerUIMap.EnterExplorerSearchText("Bug_10528");
ExplorerUIMap.DoubleClickOpenProject("localhost", "INTEGRATION TEST SERVICES", firstName);
var tab1 = TabManagerUIMap.GetActiveTab();
ExplorerUIMap.DoubleClickOpenProject("localhost", "INTEGRATION TEST SERVICES", secondName);
var tab2 = TabManagerUIMap.GetActiveTab();
//Switch tabs a couple of times
TabManagerUIMap.Click(tab1);
TabManagerUIMap.Click(tab2);
TabManagerUIMap.Click(tab1);
//Check that the tabs names dont have stars in them
var tabCount = TabManagerUIMap.GetTabCount();
Assert.IsTrue(tabCount >= 2);
for (int i = 0; i < tabCount; i++)
{
Assert.IsFalse(TabManagerUIMap.GetTabNameAtPosition(i).Contains("*"));
}
}
public void ResizeAdornerMappings_Expected_AdornerMappingIsResized()
{
const string resourceToUse = "Bug_10528";
const string innerResource = "Bug_10528_InnerWorkFlow";
// Open the Explorer
ExplorerUIMap.EnterExplorerSearchText(resourceToUse);
ExplorerUIMap.DoubleClickOpenProject("localhost", "INTEGRATION TEST SERVICES", resourceToUse);
UITestControl theTab = TabManagerUIMap.GetActiveTab();
UITestControl controlOnWorkflow = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, innerResource);
Mouse.Move(controlOnWorkflow, new Point(5, 5));
Mouse.DoubleClick();
UITestControlCollection controlCollection = controlOnWorkflow.GetChildren();
Point initialResizerPoint = new Point();
// Validate the assumption that the last child is the resizer
var resizeThumb = controlCollection[controlCollection.Count - 1];
if (resizeThumb.ControlType.ToString() == "Indicator")
{
if (resizeThumb.BoundingRectangle.X == -1)
{
Assert.Fail("Resize indicator is not visible");
}
initialResizerPoint.X = resizeThumb.BoundingRectangle.X + 5;
initialResizerPoint.Y = resizeThumb.BoundingRectangle.Y + 5;
}
else
{
Assert.Fail("Cannot find resize indicator");
}
// Drag
Mouse.Move(new Point(resizeThumb.Left + 5, resizeThumb.Top + 5));
Mouse.Click();
Mouse.StartDragging();
// Y - 50 since it starts at the lowest point
Mouse.StopDragging(new Point(initialResizerPoint.X + 50, initialResizerPoint.Y + 50));
// Check position to see it dragged
Point newResizerPoint = new Point();
if (resizeThumb.ControlType.ToString() == "Indicator")
{
newResizerPoint.X = resizeThumb.BoundingRectangle.X + 5;
newResizerPoint.Y = resizeThumb.BoundingRectangle.Y + 5;
}
if (!(newResizerPoint.X > initialResizerPoint.X) || !(newResizerPoint.Y > initialResizerPoint.Y))
{
Assert.Fail("The control was not resized properly.");
}
}
// ReSharper disable InconsistentNaming
public void StudioTooling_StudioToolingUITest_CanOpenLargeView_NoExceptionsThrown()
// ReSharper restore InconsistentNaming
{
var toolsWithLargeView = new List <string>
{
"DsfPathCopy",
"DsfPathCreate",
"DsfPathDelete",
"DsfWebGetRequestActivity",
"DsfAssignActivity",
"DsfPathRename",
"DsfSqlBulkInsertActivity",
"DsfPathMove",
"DsfFileRead",
"DsfFileWrite",
"DsfFolderRead ",
"DsfUnZip",
"DsfZip"
};
// Open the Explorer
ExplorerUIMap.EnterExplorerSearchText("AllTools");
// Open the Workflow
ExplorerUIMap.DoubleClickOpenProject("localhost", "Mocake", "AllTools");
UITestControl theTab = TabManagerUIMap.GetActiveTab();
var designer = WorkflowDesignerUIMap.GetFlowchartDesigner(theTab);
var toolsWithLargeViews = designer.GetChildren()
.Where(t => toolsWithLargeView.Contains(t.FriendlyName))
.ToList();
foreach (var child in toolsWithLargeViews)
{
//Some of the tools on the design surface are out of view, look for them...
WorkflowDesignerUIMap.ScrollControlIntoView(theTab, child);
Mouse.Move(child, new Point(15, 15));
Playback.Wait(2500); // Sorted with framework ;)
WorkflowDesignerUIMap.OpenCloseLargeView(child.Name, theTab);
Playback.Wait(500);
WorkflowDesignerUIMap.OpenCloseLargeView(child.Name, theTab);
Playback.Wait(500);
}
}
public void DebugBuriedErrors_Expected_OnlyErrorStepIsInError()
{
//Open the correct workflow
ExplorerUIMap.EnterExplorerSearchText("Bug8372");
ExplorerUIMap.DoubleClickOpenProject("localhost", "TestCategory", "Bug8372");
// Run debug
RibbonUIMap.ClickRibbonMenuItem("Debug");
PopupDialogUIMap.WaitForDialog();
DebugUIMap.ClickExecute();
OutputUIMap.WaitForExecution();
var result = OutputUIMap.IsAnyStepsInError();
// Get nested steps
Assert.IsTrue(result, "Cannot see nested error steps in the debug output.");
}
// Unstable
public void DebugOutputWithLargeDataExpectedDebugOutputWindowUpdatedWithin5Seconds()
{
//Open LargeFileTesting workflow
DockManagerUIMap.ClickOpenTabPage("Explorer");
ExplorerUIMap.ClearExplorerSearchText();
ExplorerUIMap.EnterExplorerSearchText("large");
ExplorerUIMap.DoubleClickOpenProject("localhost", "WORKFLOWS", "TESTS", "LargeFileTesting");
ExplorerUIMap.ClearExplorerSearchText();
//Click debug
SendKeys.SendWait("{F5}");
Thread.Sleep(2000);
SendKeys.SendWait("{F5}");
//Assert the debug output window is responsive after 5 seconds
// Get data split step
DockManagerUIMap.ClickOpenTabPage("Output");
DebugOutputUIMap.ClearSearch();
Mouse.Click();
Keyboard.SendKeys("Data Split");
var getSteps = DebugOutputUIMap.GetOutputWindow();
Assert.IsTrue(getSteps.Count == 1, "Debug output window took too long to respond");
var dataSplitDebugOutput = getSteps[0];
Assert.IsTrue(dataSplitDebugOutput.Exists, "Debug output window took too long to respond");
//Assert recset node expands and the more data link within that recset node is visible
var expander = dataSplitDebugOutput.GetChildren().Last(c => c.ControlType.Name == "Expander");
Mouse.Move(expander, new Point(0, 0));
Mouse.Move(new Point(Mouse.Location.X + 5, Mouse.Location.Y + 5));
Mouse.Click();
Mouse.Move(new Point(Mouse.Location.X - 25, Mouse.Location.Y - 25));
Mouse.Click();
for (var i = 0; i < 4; i++)
{
Mouse.MoveScrollWheel(-1);
}
// Get more data link
var moreLink = expander.GetChildren()[1].GetChildren().Last(c => c.Name == "...");
var moreLinkClickablePoint = new Point();
Assert.IsTrue(moreLink.TryGetClickablePoint(out moreLinkClickablePoint), "Recordset did not expand properly");
new TestBase().DoCleanup("LargeFileTesting");
}
public void DebugAWorkFlow_EnsureSaveIsEnabledAfterCompletion()
{
ExplorerUIMap.EnterExplorerSearchText("ServiceExecutionTest");
ExplorerUIMap.DoubleClickOpenProject("localhost", "TestCategory", "ServiceExecutionTest");
PopupDialogUIMap.WaitForDialog();
KeyboardCommands.SendKey("{F5}");
PopupDialogUIMap.WaitForDialog();
KeyboardCommands.SendKey("{F6}");
PopupDialogUIMap.WaitForDialog();
var uiControl = RibbonUIMap.GetControlByName("Save");
uiControl.WaitForControlReady();
Assert.IsTrue(uiControl.Enabled);
}
// ReSharper disable InconsistentNaming
public void QuickVariableInput_GriddedToolsWithComboboxes_OpenAndCloseQVI_SelectedValueIsPreserved()
// ReSharper restore InconsistentNaming
{
var gridedToolsWithComboboxes = new List <string>
{
"DsfDataMergeActivity",
"DsfDataSplitActivity",
"DsfBaseConvertActivity",
"DsfCaseConvertActivity"
};
// Open the Explorer
ExplorerUIMap.EnterExplorerSearchText("AllTools");
// Open the Workflow
ExplorerUIMap.DoubleClickOpenProject("localhost", "Mocake", "AllTools");
UITestControl theTab = TabManagerUIMap.GetActiveTab();
var designer = WorkflowDesignerUIMap.GetFlowchartDesigner(theTab);
var toolsWithLargeViews = designer.GetChildren()
.Where(t => gridedToolsWithComboboxes.Contains(t.FriendlyName))
.ToList();
foreach (var tool in toolsWithLargeViews)
{
//Some of the tools on the design surface are out of view, look for them...
if (tool.BoundingRectangle.Y > 800)
{
//might already be scrolled
var scrollBar = WorkflowDesignerUIMap.ScrollViewer_GetVerticalScrollBar(theTab);
WpfControl getTop = scrollBar as WpfControl;
if (getTop != null && getTop.Top < 200)
{
//Look low
Mouse.StartDragging(scrollBar);
Mouse.StopDragging(WorkflowDesignerUIMap.ScrollViewer_GetScrollDown(theTab));
}
}
else
{
//might already be scrolled
var scrollBar = WorkflowDesignerUIMap.ScrollViewer_GetVerticalScrollBar(theTab);
WpfControl getTop = scrollBar as WpfControl;
if (getTop != null && getTop.Top > 200)
{
//Look high
Mouse.StartDragging(scrollBar);
Mouse.StopDragging(WorkflowDesignerUIMap.ScrollViewer_GetScrollUp(theTab));
}
}
//
var selectedItems = SelectItemOnComboBox(tool.FriendlyName, theTab);
//Get Mappings button
UITestControl toggleButton = WorkflowDesignerUIMap.Adorner_GetButton(theTab, tool.FriendlyName,
"Open Quick Variable Input") as
WpfToggleButton;
// Click it
Mouse.Click(toggleButton);
//Get Mappings button
toggleButton = WorkflowDesignerUIMap.Adorner_GetButton(theTab, tool.FriendlyName,
"Close Quick Variable Input") as
WpfToggleButton;
// Click it
Mouse.Click(toggleButton);
//Assert
Assert.IsTrue(VerifySelectedItems(tool.FriendlyName, theTab, selectedItems));
}
}
public void SqlBulkInsertTest_OpenLargeViewAndEnterAnInvalidBatchAndTimeoutSizeAndClickDone_CorrectingErrorsAndClickDoneWillReturnToSmallView()
{
// Open the Explorer
ExplorerUIMap.EnterExplorerSearchText("Sql Bulk Insert Large View");
// Open the Workflow
ExplorerUIMap.DoubleClickOpenProject("localhost", "UI TEST", "Sql Bulk Insert Large View");
var theTab = TabManagerUIMap.GetActiveTab();
//Select a database
var dbDropDown = GetControlById("UI__Database_AutoID", theTab) as WpfComboBox;
Mouse.Click(dbDropDown, new Point(10, 10));
WaitForControlLoad();
if (dbDropDown != null)
{
var listOfDbNames = dbDropDown.Items.Select(i => i as WpfListItem).ToList();
var databaseName = listOfDbNames.SingleOrDefault(i => i.DisplayText.Contains(TestingDb));
Mouse.Click(databaseName, new Point(5, 5));
}
WaitForControlLoad(5000);
//Select a table
var tableDropDown = GetControlById("UI__TableName_AutoID", theTab) as WpfComboBox;
Mouse.Click(tableDropDown, new Point(10, 10));
WaitForControlLoad(10000);
if (tableDropDown != null)
{
var listOfTableNames = tableDropDown.Items.Select(i => i as WpfListItem).ToList();
WaitForControlLoad();
Mouse.Click(listOfTableNames[TableIndex], new Point(5, 5));
}
WaitForControlLoad(5000);
UITestControl controlOnWorkflow = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, "DsfSqlBulkInsertActivity");
//Open the large view using context menu
WorkflowDesignerUIMap.OpenCloseLargeViewUsingContextMenu(theTab, "DsfSqlBulkInsertActivity");
WaitForControlLoad(5000);
//Enter a few mappings
// THIS IS FAULTY LOGIC!!!!
var getFirstTextbox = WorkflowDesignerUIMap.GetSqlBulkInsertLargeViewFirstInputTextbox(controlOnWorkflow);
if (getFirstTextbox == null)
{
throw new Exception("Failed to Locate Text Box");
}
Mouse.Click(getFirstTextbox);
KeyboardCommands.SendKey("^a^xrecord().id");
KeyboardCommands.SendTab();
KeyboardCommands.SendKey("^a^xrecord().name");
KeyboardCommands.SendTab();
KeyboardCommands.SendKey("^a^xrecord().mail");
KeyboardCommands.SendTab();
WaitForControlLoad();
var batchSize = GetControlById("UI__BatchSize_AutoID", theTab);
MouseCommands.ClickControlAtPoint(batchSize, new Point(5, 5));
KeyboardCommands.SendKey("^a^x-2");
var timeout = GetControlById("UI__Timeout_AutoID", theTab);
MouseCommands.ClickControlAtPoint(timeout, new Point(5, 5));
KeyboardCommands.SendKey("^a^x-2");
var result = GetControlById("UI__Result_AutoID", theTab);
MouseCommands.ClickControlAtPoint(result, new Point(5, 5));
KeyboardCommands.SendKey("^a^x-2");
var done = GetControlById("DoneButton", theTab);
MouseCommands.ClickControlAtPoint(done, new Point(5, 5));
WaitForControlLoad();
var batchErrorMessage = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, "Batch size must be a number");
MouseCommands.MoveAndClick(new Point(batchErrorMessage.GetChildren()[0].BoundingRectangle.X + 5, batchErrorMessage.GetChildren()[0].BoundingRectangle.Y + 5));
KeyboardCommands.SendKey("^a^x200");
var timeoutErrorMessage = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, "Timeout must be a number");
MouseCommands.MoveAndClick(new Point(timeoutErrorMessage.GetChildren()[0].BoundingRectangle.X + 5, timeoutErrorMessage.GetChildren()[0].BoundingRectangle.Y + 5));
KeyboardCommands.SendKey("^a^x200");
MouseCommands.ClickControlAtPoint(done, new Point(5, 5));
batchErrorMessage = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, "Batch size must be a number");
timeoutErrorMessage = WorkflowDesignerUIMap.FindControlByAutomationId(theTab, "Timeout must be a number");
Assert.IsNull(batchErrorMessage);
Assert.IsNull(timeoutErrorMessage);
}
