private Geometry CreateRangeRings(double radius)
{
Geometry geom = null;
var param = new GeodesicEllipseParameter();
param.Center = new Coordinate2D(Point1);
param.AxisDirection = 0.0;
param.LinearUnit = GetLinearUnit(LineDistanceType);
param.OutGeometryType = GeometryType.Polyline;
param.SemiAxis1Length = radius;
param.SemiAxis2Length = radius;
param.VertexCount = VertexCount;
geom = GeometryEngine.Instance.GeodesicEllipse(param, MapView.Active.Map.SpatialReference);
var nameConverter = new EnumToFriendlyNameConverter();
var displayValue = nameConverter.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture);
// Hold onto the attributes in case user saves graphics to file later
RangeAttributes rangeAttributes = new RangeAttributes()
{
mapPoint = Point1,
numRings = numberOfRings,
distance = radius,
centerx = Point1.X,
centery = Point1.Y,
distanceunit = displayValue.ToString(),
ringorradial = "Ring"
};
CreateRangeRingOrRadialFeature(geom, rangeAttributes);
return(geom);
}
private Geometry CreatePolyline()
{
if (Point1 == null || Point2 == null)
{
return(null);
}
var nameConverter = new EnumToFriendlyNameConverter();
GeodeticCurveType curveType = DeriveCurveType(LineType);
LinearUnit lu = DeriveUnit(LineDistanceType);
try
{
// create line
var polyline = QueuedTask.Run(() =>
{
var point2Proj = GeometryEngine.Instance.Project(Point2, Point1.SpatialReference);
var segment = LineBuilder.CreateLineSegment(Point1, (MapPoint)point2Proj);
return(PolylineBuilder.CreatePolyline(segment));
}).Result;
Geometry newline = GeometryEngine.Instance.GeodeticDensifyByLength(polyline, 0, lu, curveType);
var displayValue = nameConverter.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture);
// Hold onto the attributes in case user saves graphics to file later
LineAttributes lineAttributes = new LineAttributes()
{
mapPoint1 = Point1,
mapPoint2 = Point2,
distance = distance,
angle = (double)azimuth,
angleunit = LineAzimuthType.ToString(),
distanceunit = displayValue.ToString(),
originx = Point1.X,
originy = Point1.Y,
destinationx = Point2.X,
destinationy = Point2.Y
};
CreateLineFeature(newline, lineAttributes);
ResetPoints();
return((Geometry)newline);
}
catch (Exception ex)
{
// do nothing
System.Diagnostics.Debug.WriteLine(ex.Message);
return(null);
}
}
private Geometry DrawEllipse()
{
if (Point1 == null || double.IsNaN(MajorAxisDistance) || double.IsNaN(MinorAxisDistance))
{
return(null);
}
try
{
var nameConverter = new EnumToFriendlyNameConverter();
var param = new GeodesicEllipseParameter();
param.Center = new Coordinate2D(Point1);
param.AxisDirection = GetRadiansFrom360Degrees(GetAzimuthAsDegrees());
param.LinearUnit = GetLinearUnit(LineDistanceType);
param.OutGeometryType = GeometryType.Polygon;
param.SemiAxis1Length = MajorAxisDistance;
param.SemiAxis2Length = MinorAxisDistance;
param.VertexCount = VertexCount;
var geom = GeometryEngine.Instance.GeodesicEllipse(param, MapView.Active.Map.SpatialReference);
// Hold onto the attributes in case user saves graphics to file later
var displayValue = nameConverter.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture);
EllipseAttributes ellipseAttributes = new EllipseAttributes()
{
mapPoint = Point1,
minorAxis = MinorAxisDistance * 2, // TRICKY: Label/Attribute always shows the "full" value
majorAxis = MajorAxisDistance * 2,
angle = Azimuth,
angleunit = AzimuthType.ToString(),
centerx = Point1.X,
centery = Point1.Y,
distanceunit = displayValue.ToString()
};
CreateEllipseFeature(geom, ellipseAttributes);
return((Geometry)geom);
}
catch (Exception ex)
{
System.Diagnostics.Debug.WriteLine(ex.Message);
return(null);
}
}
private void ConstructGeoCircle()
{
var construct = (IConstructGeodetic) new Polyline();
if (construct != null)
{
var displayValue = new EnumToFriendlyNameConverter();
var unitLabel = Convert.ToString(displayValue.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture));
var color = new RgbColorClass()
{
Red = 255
} as IColor;
IDictionary <String, System.Object> rrAttributes = new Dictionary <String, System.Object>();
rrAttributes.Add("rings", NumberOfRings);
rrAttributes.Add("distance", Distance);
rrAttributes.Add("centerx", Point1.X);
rrAttributes.Add("centery", Point1.Y);
rrAttributes.Add("distanceunit", unitLabel.ToString());
construct.ConstructGeodesicCircle(Point1, GetLinearUnit(), Distance, esriCurveDensifyMethod.esriCurveDensifyByAngle, 0.45);
Point2 = ((IPolyline)construct).ToPoint;
AddGraphicToMap(construct as IGeometry, color, attributes: rrAttributes);
maxDistance = Math.Max(Distance, maxDistance);
// Use negative Distance to get the location for the distance label
construct.ConstructGeodesicCircle(Point1, GetLinearUnit(), -Distance, esriCurveDensifyMethod.esriCurveDensifyByAngle, 0.45);
// Create a non geodesic circle
var circleGeom = CreateCircleGeometry(Point1, maxDistance);
// Get the basemap extent
var basemapExt = GetBasemapExtent(ArcMap.Document.FocusMap);
// Check if circle is within the basemap extent. If circle is within basemap boundary,
// then use the geodesic circle for labeling. If it's not, then use the non-geodesic
// circle to label.
bool isWithin = true;
if (basemapExt != null)
{
isWithin = IsGeometryWithinExtent(circleGeom, basemapExt);
}
AddTextToMap((isWithin) ? (IGeometry)construct : circleGeom, String.Format("{0} {1}", Math.Round(Distance, 2).ToString(), StringParser.GetStringValue(lineDistanceType)));
}
}
private void SendOrder(object sender, RoutedEventArgs e)
{
var contract = FastOrderContract.SelectedItem == null ? FastOrderContract.Filter : FastOrderContract.SelectedItem.ToString();
if (LimitTxt.Value != null & !string.IsNullOrEmpty(contract) & SizeTxt != null)
{
OrderVM.LimitPrice = LimitTxt.Value.Value;
OrderVM.Contract = contract;
OrderVM.Volume = (int)SizeTxt.Value;
var cvt = new EnumToFriendlyNameConverter();
string msg = string.Format("是否确认下单?\n合约：{0}，价格：{1}，手数：{2}, 方向：{3}，开平：{4}", OrderVM.Contract, OrderVM.LimitPrice, OrderVM.Volume,
cvt.Convert(OrderVM.Direction, typeof(DirectionType), null, CultureInfo.CurrentUICulture),
cvt.Convert(OrderVM.OpenClose, typeof(OrderOpenCloseType), null, CultureInfo.CurrentUICulture));
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
OrderVM.SendOrder();
}
}
}
private IGeometry CreateRangeRings(double radius)
{
IConstructGeodetic construct = null;
var polyLine = (IPolyline) new Polyline();
polyLine.SpatialReference = Point1.SpatialReference;
const double DENSIFY_ANGLE_IN_DEGREES = 5.0;
construct = (IConstructGeodetic)polyLine;
construct.ConstructGeodesicCircle(Point1, GetLinearUnit(), radius,
esriCurveDensifyMethod.esriCurveDensifyByAngle, DENSIFY_ANGLE_IN_DEGREES);
var color = (IColor) new RgbColorClass()
{
Red = 255
};
var displayValue = new EnumToFriendlyNameConverter();
var unitLabel = Convert.ToString(displayValue.Convert(lineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture));
IDictionary <String, System.Object> rrAttributes = new Dictionary <String, System.Object>();
rrAttributes.Add("rings", NumberOfRings);
rrAttributes.Add("distance", radius);
rrAttributes.Add("distanceunit", unitLabel);
rrAttributes.Add("centerx", Point1.X);
rrAttributes.Add("centery", Point1.Y);
AddGraphicToMap((IGeometry)construct, color, attributes: rrAttributes);
// Use negative radius to get the location for the distance label
// TODO: someone explain why we need to construct this circle twice, and what -radius means (top of circle or something)?
DistanceTypes dtVal = (DistanceTypes)LineDistanceType;
construct.ConstructGeodesicCircle(Point1, GetLinearUnit(), -radius,
esriCurveDensifyMethod.esriCurveDensifyByAngle, DENSIFY_ANGLE_IN_DEGREES);
this.AddTextToMap((IGeometry)construct, String.Format("{0} {1}", radius.ToString(), unitLabel));
return((IGeometry)construct);
}
private void UpdateFeedbackWithGeoCircle()
{
if (Point1 == null || double.IsNaN(Distance) || Distance <= 0.0)
{
return;
}
var param = new GeodesicEllipseParameter();
param.Center = new Coordinate2D(Point1);
param.AxisDirection = 0.0;
param.LinearUnit = GetLinearUnit(LineDistanceType);
param.OutGeometryType = GeometryType.Polyline;
param.SemiAxis1Length = Distance;
param.SemiAxis2Length = Distance;
param.VertexCount = VertexCount;
var geom = GeometryEngine.Instance.GeodesicEllipse(param, MapView.Active.Map.SpatialReference);
ClearTempGraphics();
var nameConverter = new EnumToFriendlyNameConverter();
var displayValue = nameConverter.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture);
// Hold onto the attributes in case user saves graphics to file later
RangeAttributes rangeAttributes = new RangeAttributes()
{
mapPoint = Point1,
numRings = NumberOfRings,
distance = Distance,
centerx = Point1.X,
centery = Point1.Y,
distanceunit = displayValue.ToString()
};
AddGraphicToMap(Point1, ColorFactory.Instance.GreenRGB, null, true, 5.0);
AddGraphicToMap(geom, ColorFactory.Instance.GreyRGB, rangeAttributes, true);
}
/// <summary>
/// Converts the current object to its XML representation.
/// </summary>
/// <returns>
/// An XML representation of the current object.
/// </returns>
private XElement ToXML(bool isToSQL = false)
{
XElement attribute = new XElement("attribute");
attribute.SetAttributeValue("optional", "YES");
attribute.SetAttributeValue("syncable", "YES");
attribute.SetAttributeValue("name", this.Name);
switch (this.AttributeType)
{
case AttributeType.BLOB:
{
attribute.SetAttributeValue("attributeType", "Binary");
}
break;
case AttributeType.GUID:
{
if (!isToSQL)
{
attribute.SetAttributeValue("attributeType", "String");
}
else
{
attribute.SetAttributeValue("attributeType", EnumToFriendlyNameConverter.ConvertEnum(this.AttributeType));
}
}
break;
default:
{
attribute.SetAttributeValue("attributeType", EnumToFriendlyNameConverter.ConvertEnum(this.AttributeType));
}
break;
}
return(attribute);
}
/// <summary>
/// Create geodetic circle
/// </summary>
private Geometry CreateCircle(bool isFeedback)
{
if (Point1 == null || double.IsNaN(Distance) || Distance <= 0.0)
{
return(null);
}
var nameConverter = new EnumToFriendlyNameConverter();
var param = new GeodesicEllipseParameter();
param.Center = new Coordinate2D(Point1);
param.AxisDirection = 0.0;
param.LinearUnit = GetLinearUnit(LineDistanceType);
param.OutGeometryType = GeometryType.Polygon;
if (isFeedback)
{
param.OutGeometryType = GeometryType.Polyline;
}
param.SemiAxis1Length = Distance;
param.SemiAxis2Length = Distance;
param.VertexCount = VertexCount;
var geom = GeometryEngine.Instance.GeodesicEllipse(param, MapView.Active.Map.SpatialReference);
CIMColor color = new CIMRGBColor()
{
R = 255, B = 0, G = 0, Alpha = 25
};
if (isFeedback)
{
color = ColorFactory.Instance.GreyRGB;
ClearTempGraphics();
AddGraphicToMap(Point1, ColorFactory.Instance.GreenRGB, null, true, 5.0);
}
// Hold onto the attributes in case user saves graphics to file later
//CircleAttributes circleAttributes = new CircleAttributes(Point1, Distance, CircleType);
double dist = 0.0;
DistanceTypes distunit;
if (CircleType == CircleFromTypes.Diameter)
{
dist = Distance * 2;
}
else
{
dist = Distance;
}
if (IsDistanceCalcExpanded)
{
dist = ConvertFromTo(LineDistanceType, RateUnit, Distance);
distunit = RateUnit;
}
else
{
distunit = LineDistanceType;
}
var displayValue = nameConverter.Convert(distunit, typeof(string), new object(), CultureInfo.CurrentCulture);
CircleAttributes circleAttributes = new CircleAttributes()
{
mapPoint = Point1, distance = dist, circleFromTypes = CircleType, circletype = CircleType.ToString(), centerx = Point1.X, centery = Point1.Y, distanceunit = displayValue.ToString()
};
if (isFeedback)
{
AddGraphicToMap(geom, color, (ProGraphicAttributes)circleAttributes, IsTempGraphic: isFeedback);
}
else
{
CreateCircleFeature(geom, circleAttributes);
}
return((Geometry)geom);
}
/// <summary>
/// Method to draw the radials inside the range rings
/// Must have at least 1 radial
/// All radials are drawn from the center point to the farthest ring
/// </summary>
private void DrawRadials()
{
// must have at least 1
if (NumberOfRadials < 1)
{
return;
}
var nameConverter = new EnumToFriendlyNameConverter();
double azimuth = 0.0;
double interval = 360.0 / NumberOfRadials;
double radialLength = 0.0;
if (!(RingType == RingTypes.Fixed))
{
radialLength = maxDistance;
}
else
{
radialLength = Distance * NumberOfRings;
}
try
{
// for each radial, draw from center point
for (int x = 0; x < NumberOfRadials; x++)
{
var polyline = QueuedTask.Run(() =>
{
MapPoint movedMP = null;
var mpList = new List <MapPoint>()
{
Point1
};
// get point 2
var results = GeometryEngine.Instance.GeodeticMove(mpList,
MapView.Active.Map.SpatialReference, radialLength, GetLinearUnit(LineDistanceType), GetAzimuthAsRadians(azimuth), GetCurveType());
// update feedback
//UpdateFeedback();
foreach (var mp in results)
{
movedMP = mp;
}
if (movedMP != null)
{
var movedMPproj = GeometryEngine.Instance.Project(movedMP, Point1.SpatialReference);
var segment = LineBuilder.CreateLineSegment(Point1, (MapPoint)movedMPproj);
return(PolylineBuilder.CreatePolyline(segment));
}
else
{
return(null);
}
}).Result;
Geometry newline = GeometryEngine.Instance.GeodeticDensifyByLength(polyline, 0, LinearUnit.Meters, GeodeticCurveType.Loxodrome);
if (newline != null)
{
// Hold onto the attributes in case user saves graphics to file later
var displayValue = nameConverter.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture);
RangeAttributes rangeAttributes = new RangeAttributes()
{
mapPoint = Point1,
numRings = NumberOfRings,
distance = radialLength,
centerx = Point1.X,
centery = Point1.Y,
distanceunit = displayValue.ToString(),
ringorradial = "Radial"
};
// AddGraphicToMap(newline, rangeAttributes);
CreateRangeRingOrRadialFeature(newline, rangeAttributes);
}
azimuth += interval;
}
}
catch (Exception ex)
{
System.Diagnostics.Debug.WriteLine(ex);
}
}
/// <summary>
/// Create a geodetic circle
/// </summary>
private IGeometry CreateCircle()
{
if (Point1 == null && Point2 == null)
{
return(null);
}
string unitLabel = "";
// This section including UpdateDistance serves to handle Diameter appropriately
var polyLine = (IPolyline) new Polyline();
polyLine.SpatialReference = Point1.SpatialReference;
var ptCol = (IPointCollection)polyLine;
ptCol.AddPoint(Point1);
ptCol.AddPoint(Point2);
UpdateDistance(polyLine as IGeometry);
try
{
var construct = (IConstructGeodetic) new Polyline();
if (construct != null)
{
construct.ConstructGeodesicCircle(Point1, GetLinearUnit(), Distance, esriCurveDensifyMethod.esriCurveDensifyByAngle, 0.01);
IDictionary <String, System.Object> circleAttributes = new Dictionary <String, System.Object>();
double radiusOrDiameterDistance = 0.0;
if (CircleType == CircleFromTypes.Diameter)
{
radiusOrDiameterDistance = Distance * 2;
}
else
{
radiusOrDiameterDistance = Distance;
}
//Construct a polygon from geodesic polyline
var newPoly = PolylineToPolygon((IPolyline)construct);
if (newPoly != null)
{
//Get centroid of polygon
var area = (IArea)newPoly;
int roundingFactor = 0;
DistanceTypes dtVal = (DistanceTypes)LineDistanceType;
// If Distance Calculator is in use, use the unit from the Rate combobox
// to label the circle
if (IsDistanceCalcExpanded)
{
// Select appropriate label and number of decimal places
switch (RateUnit)
{
case DistanceTypes.Feet:
case DistanceTypes.Meters:
case DistanceTypes.Yards:
unitLabel = RateUnit.ToString();
roundingFactor = 0;
break;
case DistanceTypes.Miles:
case DistanceTypes.Kilometers:
unitLabel = RateUnit.ToString();
roundingFactor = 2;
break;
case DistanceTypes.NauticalMiles:
var displayValue = new EnumToFriendlyNameConverter();
unitLabel = Convert.ToString(displayValue.Convert(RateUnit, typeof(string), new object(), CultureInfo.CurrentCulture));
roundingFactor = 2;
break;
default:
break;
}
}
// Else Distance Calculator not in use, use the unit from the Radius / Diameter combobox
// to label the circle
else
{
// Select appropriate number of decimal places
switch (LineDistanceType)
{
case DistanceTypes.Feet:
case DistanceTypes.Meters:
case DistanceTypes.Yards:
unitLabel = RateUnit.ToString();
roundingFactor = 0;
break;
case DistanceTypes.Miles:
case DistanceTypes.Kilometers:
unitLabel = RateUnit.ToString();
roundingFactor = 2;
break;
case DistanceTypes.NauticalMiles:
unitLabel = RateUnit.ToString();
roundingFactor = 2;
break;
default:
break;
}
var displayValue = new EnumToFriendlyNameConverter();
unitLabel = Convert.ToString(displayValue.Convert(dtVal, typeof(string), new object(), CultureInfo.CurrentCulture));
}
string circleTypeLabel = circleType.ToString();
string distanceLabel = "";
// Use the unit from Rate combobox if Distance Calculator is expanded
if (IsDistanceCalcExpanded)
{
radiusOrDiameterDistance = ConvertFromTo(LineDistanceType, RateUnit, radiusOrDiameterDistance);
distanceLabel = (TrimPrecision(radiusOrDiameterDistance, RateUnit, true)).ToString("N" + roundingFactor.ToString());
}
else
{
distanceLabel = (TrimPrecision(radiusOrDiameterDistance, LineDistanceType, false)).ToString("N" + roundingFactor.ToString());
}
//Add text using centroid point
this.AddTextToMap(area.LabelPoint, string.Format("{0}:{1} {2}",
circleTypeLabel,
distanceLabel,
StringParser.GetStringValue(dtVal)));
}
double radiusDistance = radiusOrDiameterDistance;
if (CircleType == CircleFromTypes.Diameter)
{
radiusDistance = radiusOrDiameterDistance / 2;
}
circleAttributes.Add("radius", radiusDistance);
circleAttributes.Add("disttype", CircleType.ToString());
circleAttributes.Add("centerx", Point1.X);
circleAttributes.Add("centery", Point1.Y);
if (IsDistanceCalcExpanded)
{
circleAttributes.Add("distanceunit", unitLabel.ToString());
}
else
{
circleAttributes.Add("distanceunit", unitLabel.ToString());
}
var color = new RgbColorClass()
{
Red = 255
} as IColor;
this.AddGraphicToMap(construct as IGeometry, color, attributes: circleAttributes);
Point2 = null;
HasPoint2 = false;
ResetFeedback();
}
return(construct as IGeometry);
}
catch (Exception ex)
{
System.Diagnostics.Debug.WriteLine(ex.Message);
return(null);
}
}
/// <summary>
/// Create a geodetic ellipse
/// </summary>
private IGeometry DrawEllipse()
{
try
{
var ellipticArc = (IConstructGeodetic) new Polyline();
double bearing;
bearing = GetAzimuthAsDegrees();
ellipticArc.ConstructGeodesicEllipse(Point1, GetLinearUnit(), MajorAxisDistance, MinorAxisDistance, bearing, esriCurveDensifyMethod.esriCurveDensifyByAngle, 0.01);
var line = ellipticArc as IPolyline;
if (line != null)
{
var color = (IColor) new RgbColorClass()
{
Red = 255
};
var displayValue = new EnumToFriendlyNameConverter();
var unitLabel = Convert.ToString(displayValue.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture));
IDictionary <String, System.Object> ellipseAttributes = new Dictionary <String, System.Object>();
ellipseAttributes.Add("majoraxis", MajorAxisDistance);
ellipseAttributes.Add("minoraxis", MinorAxisDistance);
ellipseAttributes.Add("azimuth", Azimuth);
ellipseAttributes.Add("centerx", Point1.X);
ellipseAttributes.Add("centery", Point1.Y);
ellipseAttributes.Add("distanceunit", unitLabel.ToString());
ellipseAttributes.Add("angleunit", AzimuthType.ToString());
AddGraphicToMap((IGeometry)line, color, attributes: ellipseAttributes);
//Convert ellipse polyline to polygon
var newPoly = PolylineToPolygon((IPolyline)ellipticArc);
if (newPoly != null)
{
//Get centroid of polygon
var area = newPoly as IArea;
//Add text using centroid point
DistanceTypes dtVal = (DistanceTypes)LineDistanceType; //Get line distance type
AzimuthTypes atVal = (AzimuthTypes)AzimuthType; //Get azimuth type
EllipseTypes ellipseType = EllipseType;
double majAxisDist = majorAxisDistance * 2;
double minAxisDist = minorAxisDistance * 2;
if (area != null)
{
AddTextToMap(area.LabelPoint, string.Format("{0}:{1} {2}{3}{4}:{5} {6}{7}{8}:{9} {10}",
StringParser.GetStringValue(LabelTypes.MajorAxis),
Math.Round(majAxisDist, 2),
StringParser.GetStringValue(dtVal),
Environment.NewLine,
StringParser.GetStringValue(LabelTypes.MinorAxis),
Math.Round(minAxisDist, 2),
StringParser.GetStringValue(dtVal),
Environment.NewLine,
StringParser.GetStringValue(LabelTypes.Angle),
Math.Round(azimuth, 0),
StringParser.GetStringValue(atVal)));
}
}
}
return((IGeometry)line);
}
catch (Exception ex)
{
System.Diagnostics.Debug.WriteLine(ex.Message);
return(null);
}
}
/// <summary>
/// Create a geodetic line
/// </summary>
private IGeometry CreatePolyline()
{
try
{
if ((Point1 == null) || (Point2 == null))
{
return(null);
}
var construct = (IConstructGeodetic) new Polyline();
if (srf3 == null)
{
// if you don't use the activator, you will get exceptions
Type srType = Type.GetTypeFromProgID("esriGeometry.SpatialReferenceEnvironment");
srf3 = Activator.CreateInstance(srType) as ISpatialReferenceFactory3;
}
if (srf3 == null)
{
return(null);
}
if (Point1.SpatialReference != ArcMap.Document.FocusMap.SpatialReference)
{
Point1.Project(ArcMap.Document.FocusMap.SpatialReference);
}
if (Point2.SpatialReference != ArcMap.Document.FocusMap.SpatialReference)
{
Point2.Project(ArcMap.Document.FocusMap.SpatialReference);
}
esriGeodeticType type = GetEsriGeodeticType();
if (LineFromType == LineFromTypes.Points)
{
construct.ConstructGeodeticLineFromPoints(GetEsriGeodeticType(), Point1, Point2, GetLinearUnit(), esriCurveDensifyMethod.esriCurveDensifyByDeviation, -1.0);
}
else
{
Double bearing = 0.0;
if (LineAzimuthType == AzimuthTypes.Mils || LineAzimuthType == AzimuthTypes.Gradians)
{
bearing = GetAzimuthAsDegrees();
}
else
{
bearing = (double)Azimuth;
}
construct.ConstructGeodeticLineFromDistance(type, Point1, GetLinearUnit(), Distance, bearing, esriCurveDensifyMethod.esriCurveDensifyByDeviation, -1.0);
}
if (LineFromType == LineFromTypes.Points)
{
UpdateDistance(construct as IGeometry);
UpdateAzimuth(construct as IGeometry);
}
var displayValue = new EnumToFriendlyNameConverter();
var unitLabel = Convert.ToString(displayValue.Convert(LineDistanceType, typeof(string), new object(), CultureInfo.CurrentCulture));
IDictionary <String, System.Object> lineAttributes = new Dictionary <String, System.Object>();
lineAttributes.Add("distance", Distance);
lineAttributes.Add("distanceunit", unitLabel.ToString());
lineAttributes.Add("angle", (double)Azimuth);
lineAttributes.Add("angleunit", LineAzimuthType.ToString());
lineAttributes.Add("startx", Point1.X);
lineAttributes.Add("starty", Point1.Y);
lineAttributes.Add("endx", Point2.X);
lineAttributes.Add("endy", Point2.Y);
var color = new RgbColorClass()
{
Red = 255
} as IColor;
AddGraphicToMap(construct as IGeometry, color, attributes: lineAttributes);
if (HasPoint1 && HasPoint2)
{
if (Point1.SpatialReference != ArcMap.Document.FocusMap.SpatialReference)
{
Point1.Project(ArcMap.Document.FocusMap.SpatialReference);
}
//Get line distance type
DistanceTypes dtVal = (DistanceTypes)LineDistanceType;
//Get azimuth type
AzimuthTypes atVal = (AzimuthTypes)LineAzimuthType;
//Create text symbol using text and Point1
AddTextToMap(Point1, /* Use the start point for label */
string.Format("{0} {1} {2}: {3}{4}",
Math.Round(Distance, 2).ToString("N2"),
StringParser.GetStringValue(dtVal),
LabelTypes.Angle,
Math.Round(azimuth.Value, 0),
StringParser.GetStringValue(atVal)), (double)Azimuth, LineAzimuthType, false);
}
ResetPoints();
return(construct as IGeometry);
}
catch (Exception ex)
{
System.Diagnostics.Debug.WriteLine(ex);
return(null);
}
}
private void MenuItem_Click_ClosePosition(object sender, RoutedEventArgs e)
{
PositionVM positionVM = PositionListView.SelectedItem as PositionVM;
//var orderVM = new OrderVM(MessageHandlerContainer.DefaultInstance.Get<TraderExHandler>());
var orderVM = new OrderVM(TradeHandler);
if (positionVM != null)
{
if (positionVM.Position != 0)
{
var mktdataVM = _marketDataList.FirstOrDefault(c => c.Contract == positionVM.Contract);
if (mktdataVM != null)
{
if (positionVM.Direction == PositionDirectionType.PD_LONG)
{
if (positionVM.Position != 0)
{
var cvt = new EnumToFriendlyNameConverter();
//string msg = string.Format("委托确认\n昨仓 合约：{0}，价格：{1}，方向：卖, 手数：{2}，开平：平仓\n今仓 合约：{3}，价格：{4}，方向：卖, 手数：{5}，开平：平今",
// positionVM.Contract, mktdataVM.BidPrice, positionVM.YdPosition, positionVM.Contract, mktdataVM.BidPrice, positionVM.TodayPosition);
//MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
//if (dr == MessageBoxResult.OK)
if (positionVM.YdPosition != 0 & mktdataVM.BidSize != 0 & positionVM.TodayPosition == 0)
{
string msg = string.Format("{0}: {1} 卖 {2}手 平仓",
positionVM.Contract, mktdataVM.BidPrice, positionVM.YdPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSEYESTERDAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.YdPosition;
orderVM.Direction = DirectionType.SELL;
orderVM.LimitPrice = mktdataVM.BidPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
if (positionVM.TodayPosition != 0 & mktdataVM.BidSize != 0 & positionVM.YdPosition == 0)
{
string msg = string.Format("{0}: {1} 卖 {2}手 平仓",
positionVM.Contract, mktdataVM.BidPrice, positionVM.TodayPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSETODAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.TodayPosition;
orderVM.Direction = DirectionType.SELL;
orderVM.LimitPrice = mktdataVM.BidPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
if (positionVM.TodayPosition != 0 & mktdataVM.BidSize != 0 & positionVM.YdPosition != 0)
{
string msg = string.Format("{0}: {1} 卖 {2}手 平仓\n{3}: {4} 卖 {5}手 平今",
positionVM.Contract, mktdataVM.BidPrice, positionVM.YdPosition, positionVM.Contract, mktdataVM.BidPrice, positionVM.TodayPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSEYESTERDAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.YdPosition;
orderVM.Direction = DirectionType.SELL;
orderVM.LimitPrice = mktdataVM.BidPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
orderVM.SendOrder();
orderVM.OpenClose = OrderOpenCloseType.CLOSETODAY;
orderVM.Volume = positionVM.TodayPosition;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
}
}
if (positionVM.Direction == PositionDirectionType.PD_SHORT)
{
if (positionVM.Position != 0)
{
var cvt = new EnumToFriendlyNameConverter();
//string msg = string.Format("委托确认\n昨仓 合约：{0}，价格：{1}，方向：买, 手数：{2}，开平：平仓\n今仓 合约：{3}，价格：{4}，方向：买, 手数：{5}，开平：平今",
// positionVM.Contract, mktdataVM.AskPrice, positionVM.YdPosition, positionVM.Contract, mktdataVM.AskPrice, positionVM.TodayPosition);
//MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
//if (dr == MessageBoxResult.OK)
if (positionVM.YdPosition != 0 & mktdataVM.AskSize != 0 & positionVM.TodayPosition == 0)
{
string msg = string.Format("{0}: {1} 买 {2}手 平仓",
positionVM.Contract, mktdataVM.AskPrice, positionVM.YdPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSEYESTERDAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.YdPosition;
orderVM.Direction = DirectionType.BUY;
orderVM.LimitPrice = mktdataVM.AskPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
if (positionVM.TodayPosition != 0 & mktdataVM.AskSize != 0 & positionVM.YdPosition == 0)
{
string msg = string.Format("{0}: {1} 买 {2}手 平今",
positionVM.Contract, mktdataVM.AskPrice, positionVM.TodayPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSETODAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.TodayPosition;
orderVM.Direction = DirectionType.BUY;
orderVM.LimitPrice = mktdataVM.AskPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
if (positionVM.TodayPosition != 0 & mktdataVM.AskSize != 0 & positionVM.YdPosition != 0)
{
string msg = string.Format("{0}: {1} 买 {2}手 平仓\n{3}: {4} 卖 {5}手 平今",
positionVM.Contract, mktdataVM.AskPrice, positionVM.YdPosition, positionVM.Contract, mktdataVM.AskPrice, positionVM.TodayPosition);
MessageBoxResult dr = System.Windows.MessageBox.Show(msg, "提示", MessageBoxButton.OKCancel, MessageBoxImage.Question);
if (dr == MessageBoxResult.OK)
{
orderVM.OpenClose = OrderOpenCloseType.CLOSEYESTERDAY;
orderVM.Contract = positionVM.Contract;
orderVM.Volume = positionVM.YdPosition;
orderVM.Direction = DirectionType.BUY;
orderVM.LimitPrice = mktdataVM.AskPrice;
orderVM.TIF = OrderTIFType.GFD;
orderVM.ExecType = OrderExecType.LIMIT;
orderVM.SendOrder();
orderVM.OpenClose = OrderOpenCloseType.CLOSETODAY;
orderVM.Volume = positionVM.TodayPosition;
if (positionVM.Portfolio != null)
{
orderVM.Portfolio = positionVM.Portfolio;
}
orderVM.SendOrder();
}
}
}
}
}
}
}
}
