/// <summary>
/// Create a list of geometry objects to export from an initial list of solids and meshes, excluding invisible and not exported categories.
/// </summary>
/// <param name="doc">The document.</param>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="solids">The list of solids, possibly empty.</param>
/// <param name="meshes">The list of meshes, possibly empty.</param>
/// <returns>The combined list of solids and meshes that are visible given category export settings and view visibility settings.</returns>
public static List <GeometryObject> RemoveInvisibleSolidsAndMeshes(Document doc, ExporterIFC exporterIFC, IList <Solid> solids, IList <Mesh> meshes)
{
List <GeometryObject> geomObjectsIn = new List <GeometryObject>();
if (solids != null && solids.Count > 0)
{
geomObjectsIn.AddRange(solids);
}
if (meshes != null && meshes.Count > 0)
{
geomObjectsIn.AddRange(meshes);
}
List <GeometryObject> geomObjectsOut = new List <GeometryObject>();
View filterView = ExporterCacheManager.ExportOptionsCache.FilterViewForExport;
foreach (GeometryObject obj in geomObjectsIn)
{
GraphicsStyle gStyle = doc.GetElement(obj.GraphicsStyleId) as GraphicsStyle;
if (gStyle != null)
{
Category graphicsStyleCategory = gStyle.GraphicsStyleCategory;
if (graphicsStyleCategory != null)
{
if (!ElementFilteringUtil.IsCategoryVisible(graphicsStyleCategory, filterView))
{
continue;
}
ElementId catId = graphicsStyleCategory.Id;
string ifcClassName = ExporterUtil.GetIFCClassNameFromExportTable(exporterIFC, catId);
if (!string.IsNullOrEmpty(ifcClassName))
{
bool foundName = String.Compare(ifcClassName, "Default", true) != 0;
if (foundName)
{
IFCExportInfoPair exportType = ElementFilteringUtil.GetExportTypeFromClassName(ifcClassName);
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
continue;
}
}
}
}
}
geomObjectsOut.Add(obj);
}
return(geomObjectsOut);
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementPart", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (standaloneExport || asBuildingElement)
{
partExportLevel = partElement.LevelId;
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.LevelId;
}
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType = null;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
string defaultValue = null;
// This replicates old functionality before IFC4 addition, where the default for slab was "FLOOR".
// Really the export layer table should be fixed for this case.
if (string.IsNullOrWhiteSpace(ifcEnumType) && hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
ifcEnumType = IFCValidateEntry.GetValidIFCType(hostElement, ifcEnumType, defaultValue);
switch (exportType)
{
case IFCExportType.IfcColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType, null);
break;
case IFCExportType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcSlab:
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
case IFCExportType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports curtain object as container.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportCurtainObjectCommonAsContainer(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, ProductWrapper origWrapper, PlacementSetter currSetter)
{
if (wallElement == null)
{
return;
}
string overrideCADLayer = null;
ParameterUtil.GetStringValueFromElementOrSymbol(wallElement, "IFCCadLayer", out overrideCADLayer);
using (ExporterStateManager.CADLayerOverrideSetter layerSetter = new ExporterStateManager.CADLayerOverrideSetter(overrideCADLayer))
{
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>(); // just in case.
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
{
foreach (ElementId subElemId in allSubElements)
{
using (ProductWrapper productWrapper = ProductWrapper.Create(origWrapper))
{
Element subElem = wallElement.Document.GetElement(subElemId);
if (subElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
// Respect element visibility settings.
if (!ElementFilteringUtil.CanExportElement(exporterIFC, subElem, false) || !ElementFilteringUtil.IsElementVisible(subElem))
{
continue;
}
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
try
{
if (subElem is FamilyInstance)
{
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, subElem, out ifcEnumType);
if (subElem is Mullion)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else
{
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
exportType.SetValueWithPair(IFCEntityType.IfcMemberType);
ifcEnumType = "MULLION";
}
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subElem as Mullion, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
else
{
FamilyInstance subFamInst = subElem as FamilyInstance;
if (exportType.ExportInstance == IFCEntityType.IfcCurtainWall)
{
// By default, panels and mullions are set to the same category as their parent. In this case,
// ask to get the exportType from the category id, since we don't want to inherit the parent class.
ElementId catId = CategoryUtil.GetSafeCategoryId(subElem);
exportType = ElementFilteringUtil.GetExportTypeFromCategoryId(catId, out ifcEnumType);
}
if (ExporterCacheManager.ExportOptionsCache.ExportAs2x2)
{
if ((exportType.ExportInstance == IFCEntityType.UnKnown) ||
(exportType.ExportInstance == IFCEntityType.IfcPlate) ||
(exportType.ExportInstance == IFCEntityType.IfcMember))
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy);
}
}
else
{
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
ifcEnumType = "CURTAIN_PANEL";
exportType.SetValueWithPair(IFCEntityType.IfcPlateType);
}
}
IFCAnyHandle currLocalPlacement = currSetter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subFamInst, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null, currLocalPlacement);
}
}
}
else if (subElem is CurtainGridLine)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else if (subElem is Wall)
{
WallExporter.ExportWall(exporterIFC, null, subElem, null, geomElem, productWrapper);
}
}
catch (Exception ex)
{
if (ExporterUtil.IsFatalException(wallElement.Document, ex))
{
throw ex;
}
continue;
}
}
}
}
}
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="placementSetter"></param>
/// <param name="originalPlacement"></param>
/// <param name="range"></param>
/// <param name="ifcExtrusionAxes"></param>
/// <param name="hostElement">The host of the part. This can be null.</param>
/// <param name="overrideLevelId">The id of the level that the part is one, overridding other sources.</param>
/// <param name="asBuildingElement">If true, export the Part as a building element instead of an IfcElementPart.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
// We don't know how to export a part as a building element if we don't know it's host.
if (asBuildingElement && (hostElement == null))
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementPart;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
else
{
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null || asBuildingElement;
ElementId partExportLevelId = (overrideLevelId != null) ? overrideLevelId : null;
if (partExportLevelId == null && standaloneExport)
{
partExportLevelId = partElement.LevelId;
}
if (partExportLevelId == null)
{
if (hostElement == null || (part.OriginalCategoryId != hostElement.Category.Id))
{
return;
}
partExportLevelId = hostElement.LevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevelId))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport)
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, partElement, out overrideContainerHnd);
if (overrideContainerId != ElementId.InvalidElementId && (partExportLevelId == null || partExportLevelId == ElementId.InvalidElementId))
{
partExportLevelId = overrideContainerId;
}
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevelId, overrideContainerHnd);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
//partPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = new List <Solid>();;
IList <Mesh> meshes = new List <Mesh>();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(partElement.Document, exporterIFC, solidMeshInfo.GetSolids(), solidMeshInfo.GetMeshes());
foreach (GeometryObject gObj in gObjs)
{
if (gObj is Solid)
{
solids.Add(gObj as Solid);
}
else if (gObj is Mesh)
{
meshes.Add(gObj as Mesh);
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep);
}
else
{
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcColumn:
ifcPart = IFCInstanceExporter.CreateColumn(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType, null);
break;
case IFCEntityType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcSlab:
{
// TODO: fix this elsewhere.
if (ExporterUtil.IsNotDefined(ifcEnumType))
{
if (hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
else if (hostCatId == new ElementId(BuiltInCategory.OST_Roofs))
{
ifcEnumType = "ROOF";
}
}
ifcPart = IFCInstanceExporter.CreateSlab(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
}
break;
case IFCEntityType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
break;
}
}
bool containedInLevel = standaloneExport;
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel, exportType);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevelId, standaloneExport ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Exports curtain object as container.
/// </summary>
/// <param name="allSubElements">
/// Collection of elements contained in the host curtain element.
/// </param>
/// <param name="wallElement">
/// The curtain wall element.
/// </param>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="productWrapper">
/// The IFCProductWrapper.
/// </param>
public static void ExportCurtainObjectCommonAsContainer(ICollection <ElementId> allSubElements, Element wallElement,
ExporterIFC exporterIFC, IFCProductWrapper origWrapper)
{
if (wallElement == null)
{
return;
}
HashSet <ElementId> alreadyVisited = new HashSet <ElementId>(); // just in case.
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
{
foreach (ElementId subElemId in allSubElements)
{
using (IFCProductWrapper productWrapper = IFCProductWrapper.Create(origWrapper))
{
Element subElem = wallElement.Document.GetElement(subElemId);
if (subElem == null)
{
continue;
}
GeometryElement geomElem = subElem.get_Geometry(geomOptions);
if (geomElem == null)
{
continue;
}
if (alreadyVisited.Contains(subElem.Id))
{
continue;
}
alreadyVisited.Add(subElem.Id);
try
{
if (subElem is FamilyInstance)
{
if (subElem is Mullion)
{
if (exporterIFC.ExportAs2x2)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
else
{
using (IFCPlacementSetter currSetter = IFCPlacementSetter.Create(exporterIFC, wallElement))
{
IFCAnyHandle currLocalPlacement = currSetter.GetPlacement();
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
MullionExporter.Export(exporterIFC, subElem as Mullion, geomElem, currLocalPlacement, extraParams, currSetter,
productWrapper);
}
}
}
}
else
{
FamilyInstance subFamInst = subElem as FamilyInstance;
string ifcEnumType;
ElementId catId = CategoryUtil.GetSafeCategoryId(subElem);
IFCExportType exportType = ElementFilteringUtil.GetExportTypeFromCategoryId(catId, out ifcEnumType);
if (exporterIFC.ExportAs2x2)
{
if ((exportType == IFCExportType.DontExport) || (exportType == IFCExportType.ExportPlateType) ||
(exportType == IFCExportType.ExportMemberType))
{
exportType = IFCExportType.ExportBuildingElementProxy;
}
}
else
{
if (exportType == IFCExportType.DontExport)
{
ifcEnumType = "CURTAIN_PANEL";
exportType = IFCExportType.ExportPlateType;
}
}
FamilyInstanceExporter.ExportFamilyInstanceAsMappedItem(exporterIFC, subFamInst, exportType, ifcEnumType, productWrapper,
ElementId.InvalidElementId, null);
}
}
else if (subElem is CurtainGridLine)
{
ProxyElementExporter.Export(exporterIFC, subElem, geomElem, productWrapper);
}
}
catch (Exception ex)
{
if (ExporterUtil.IsFatalException(wallElement.Document, ex))
{
throw ex;
}
continue;
}
}
}
}
}
private static bool ExportGenericElementAsMappedItem(ExporterIFC exporterIFC,
Element element, GeometryElement geomElem, IFCExportInfoPair exportType,
ProductWrapper wrapper)
{
GeometryInstance geometryInstance = GetTheGeometryInstance(geomElem);
if (geometryInstance == null)
{
return(false);
}
GeometryElement exportGeometry = geometryInstance.GetSymbolGeometry();
if (exportGeometry == null)
{
return(false);
}
ElementId symbolId = geometryInstance.GetSymbolGeometryId()?.SymbolId ?? ElementId.InvalidElementId;
ElementType elementType = element.Document.GetElement(symbolId) as ElementType;
if (elementType == null)
{
return(false);
}
Transform originalTrf = geometryInstance.Transform;
// Can't handle mirrored transforms yet.
if (originalTrf.HasReflection)
{
return(false);
}
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCFile file = exporterIFC.GetFile();
IList <Transform> repMapTrfList = new List <Transform>();
BodyData bodyData = null;
FamilyTypeInfo typeInfo = new FamilyTypeInfo();
IFCExtrusionCreationData extraParams = typeInfo.extraParams;
Transform offsetTransform = Transform.Identity;
// We will create a new mapped type if we haven't already created the type.
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(symbolId, false, exportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
IList <IFCAnyHandle> representations3D = new List <IFCAnyHandle>();
IFCAnyHandle dummyPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
extraParams.SetLocalPlacement(dummyPlacement);
using (TransformSetter trfSetter = TransformSetter.Create())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(false, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
bodyData = BodyExporter.ExportBody(exporterIFC, element, categoryId,
ExporterUtil.GetSingleMaterial(element), exportGeometry,
bodyExporterOptions, extraParams);
typeInfo.MaterialIdList = bodyData.MaterialIds;
offsetTransform = bodyData.OffsetTransform;
// This code does not handle openings yet.
// The intention for this is FabricationParts and DirectShapes which do not
// currently have opening.
// If they can have openings in the future, we can add this.
IFCAnyHandle bodyRepHnd = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRepHnd) || extraParams.GetOpenings().Count > 0)
{
return(false);
}
representations3D.Add(bodyRepHnd);
repMapTrfList.Add(null);
}
typeInfo.StyleTransform = ExporterIFCUtils.GetUnscaledTransform(exporterIFC,
extraParams.GetLocalPlacement());
IFCAnyHandle typeStyle = FamilyInstanceExporter.CreateTypeEntityHandle(exporterIFC,
ref typeInfo, null, representations3D, repMapTrfList, null,
element, elementType, elementType, false, false,
exportType, out HashSet <IFCAnyHandle> propertySets);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(typeStyle))
{
wrapper.RegisterHandleWithElementType(elementType, exportType, typeStyle,
propertySets);
typeInfo.Style = typeStyle;
CategoryUtil.TryToCreateMaterialAssocation(exporterIFC, bodyData, elementType,
element, exportGeometry, typeStyle, typeInfo);
// Create other generic classification from ClassificationCode(s)
ClassificationUtil.CreateClassification(exporterIFC, file, elementType, typeStyle);
ClassificationUtil.CreateUniformatClassification(exporterIFC, file, elementType, typeStyle);
}
}
if (found && !typeInfo.IsValid())
{
typeInfo = currentTypeInfo;
}
// we'll pretend we succeeded, but we'll do nothing.
if (!typeInfo.IsValid())
{
return(false);
}
extraParams = typeInfo.extraParams;
// We expect no openings, so always add to map.
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(symbolId, false, exportType, typeInfo);
XYZ scaledMapOrigin = XYZ.Zero;
Transform scaledTrf = originalTrf.Multiply(typeInfo.StyleTransform);
// create instance.
IList <IFCAnyHandle> shapeReps = FamilyInstanceExporter.CreateShapeRepresentations(exporterIFC,
file, element, categoryId, typeInfo, scaledMapOrigin);
if (shapeReps == null)
{
return(false);
}
Transform boundingBoxTrf = (offsetTransform != null) ? offsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = boundingBoxTrf.Multiply(scaledTrf.Inverse);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomElem, boundingBoxTrf);
if (boundingBoxRep != null)
{
shapeReps.Add(boundingBoxRep);
}
IFCAnyHandle repHnd = (shapeReps.Count > 0) ? IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, shapeReps) : null;
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, scaledTrf, null))
{
IFCAnyHandle instanceHandle = null;
IFCAnyHandle localPlacement = setter.LocalPlacement;
bool materialAlreadyAssociated = false;
// We won't create the instance if:
// (1) we are exporting to CV2.0/RV, (2) we have no 2D, 3D, or bounding box geometry, and (3) we aren't exporting parts.
if (!(repHnd == null &&
(ExporterCacheManager.ExportOptionsCache.ExportAsCoordinationView2 ||
ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)))
{
string instanceGUID = GUIDUtil.CreateGUID(element);
bool isChildInContainer = element.AssemblyInstanceId != ElementId.InvalidElementId;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
bool isBuildingElementProxy =
((exportType.ExportInstance == IFCEntityType.IfcBuildingElementProxy) ||
(exportType.ExportType == IFCEntityType.IfcBuildingElementProxyType));
ElementId roomId = setter.UpdateRoomRelativeCoordinates(element,
out IFCAnyHandle localPlacementToUse);
bool containedInSpace = (roomId != ElementId.InvalidElementId) && (exportType.ExportInstance != IFCEntityType.IfcSystemFurnitureElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
if (!isBuildingElementProxy)
{
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, element, instanceGUID,
ownerHistory, localPlacementToUse, repHnd);
}
else
{
instanceHandle = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, instanceGUID,
ownerHistory, localPlacementToUse, repHnd, exportType.ValidatedPredefinedType);
}
bool associateToLevel = !containedInSpace && !isChildInContainer;
wrapper.AddElement(element, instanceHandle, setter, extraParams, associateToLevel, exportType);
if (containedInSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
if (ElementFilteringUtil.IsMEPType(exportType) || ElementFilteringUtil.ProxyForMEPType(element, exportType))
{
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
}
ExporterCacheManager.HandleToElementCache.Register(instanceHandle, element.Id);
if (!materialAlreadyAssociated)
{
// Create material association for the instance only if the the istance geometry is different from the type
// or the type does not have any material association
IFCAnyHandle constituentSetHnd = ExporterCacheManager.MaterialSetCache.FindConstituentSetHnd(symbolId);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(constituentSetHnd) &&
bodyData != null && bodyData.RepresentationItemInfo != null && bodyData.RepresentationItemInfo.Count > 0)
{
CategoryUtil.CreateMaterialAssociationWithShapeAspect(exporterIFC, element, instanceHandle, bodyData.RepresentationItemInfo);
}
else
{
// Create material association in case if bodyData is null
CategoryUtil.CreateMaterialAssociation(exporterIFC, instanceHandle, typeInfo.MaterialIdList);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(typeInfo.Style))
{
ExporterCacheManager.TypeRelationsCache.Add(typeInfo.Style, instanceHandle);
}
}
}
}
return(true);
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
IFCPlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
IFCPlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null && !asBuildingElement;
ElementId partExportLevel = null;
if (overrideLevelId != null)
{
partExportLevel = overrideLevelId;
}
else if (standaloneExport || asBuildingElement)
{
if (partElement.Level != null)
{
partExportLevel = partElement.Level.Id;
}
}
else
{
if (part.OriginalCategoryId != hostElement.Category.Id)
{
return;
}
partExportLevel = hostElement.Level.Id;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevel))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport || asBuildingElement)
{
Transform orientationTrf = Transform.Identity;
standalonePlacementSetter = IFCPlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevel);
partPlacement = standalonePlacementSetter.GetPlacement();
}
else
{
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string partGUID = GUIDUtil.CreateGUID(partElement);
string partName = NamingUtil.GetNameOverride(partElement, NamingUtil.GetIFCName(partElement));
string partDescription = NamingUtil.GetDescriptionOverride(partElement, null);
string partObjectType = NamingUtil.GetObjectTypeOverride(partElement, NamingUtil.CreateIFCObjectName(exporterIFC, partElement));
string partTag = NamingUtil.GetTagOverride(partElement, NamingUtil.CreateIFCElementId(partElement));
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
}
else
{
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
switch (exportType)
{
case IFCExportType.ExportColumnType:
ifcPart = IFCInstanceExporter.CreateColumn(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
case IFCExportType.ExportCovering:
IFCCoveringType coveringType = CeilingExporter.GetIFCCoveringType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateCovering(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, coveringType);
break;
case IFCExportType.ExportFooting:
IFCFootingType footingType = FootingExporter.GetIFCFootingType(hostElement, ifcEnumType);
ifcPart = IFCInstanceExporter.CreateFooting(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, footingType);
break;
case IFCExportType.ExportRoof:
IFCRoofType roofType = RoofExporter.GetIFCRoofType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateRoof(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, roofType);
break;
case IFCExportType.ExportSlab:
IFCSlabType slabType = FloorExporter.GetIFCSlabType(ifcEnumType);
ifcPart = IFCInstanceExporter.CreateSlab(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag, slabType);
break;
case IFCExportType.ExportWall:
ifcPart = IFCInstanceExporter.CreateWall(file, partGUID, ownerHistory, partName, partDescription, partObjectType,
extrusionCreationData.GetLocalPlacement(), prodRep, partTag);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(file, partGUID, ownerHistory, partName, partDescription,
partObjectType, extrusionCreationData.GetLocalPlacement(), prodRep, partTag, null);
break;
}
}
bool containedInLevel = (standaloneExport || asBuildingElement);
IFCPlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevel, standaloneExport || asBuildingElement ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociations(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
