private void AddPartNameNote(DrawingView drawingView) { var partName = drawingView.ReferencedDocumentDescriptor.DisplayName.RemoveExtension(); var rowItemNumber = GetRowItemNumber(partName); if (string.IsNullOrEmpty(rowItemNumber) == false) partName = $"{rowItemNumber} : {partName}"; drawingView.AddPartName(partName, drawingDistance: 0.5); }
////////////////////////////////////////////////////////////////////////////////////// // Use: AdnGraphicsData constructor for DrawingView graphics // ////////////////////////////////////////////////////////////////////////////////////// public AdnGraphics(DrawingView view, string clientId, bool transacting) { _clientId = clientId + (transacting ? "-Tx" : "-NonTx"); _graphicsData = null; _graphics = null; try { _graphicsData = view.GraphicsDataSetsCollection[_clientId]; } catch { if (transacting) { _graphicsData = view.GraphicsDataSetsCollection.Add(_clientId); } else { _graphicsData = view.GraphicsDataSetsCollection.AddNonTransacting(_clientId); } } try { _graphics = view.ClientGraphicsCollection[_clientId]; } catch { if (transacting) { _graphics = view.ClientGraphicsCollection.Add(_clientId); } else { _graphics = view.ClientGraphicsCollection.AddNonTransacting(_clientId); } } }
public void DeleteGraphics(DrawingView drawingView, bool deleteData) { AdnGraphics dataTx = new AdnGraphics(drawingView, _clientId, true); dataTx.Delete(deleteData); AdnGraphics dataNonTx = new AdnGraphics(drawingView, _clientId, false); dataNonTx.Delete(deleteData); }
public void SetGraphicsSource(DrawingView drawingView) { _workingView = drawingView; _mode = AdnGraphicModeEnum.kDrawingViewGraphics; }
/// <summary> /// Raises the <see cref="DrawingView"/> event. /// </summary> /// <param name="time">Time elapsed since the last call to <see cref="UltravioletContext.Draw(UltravioletTime)"/>.</param> /// <param name="spriteBatch">The <see cref="SpriteBatch"/> with which the panel is being drawn.</param> protected virtual void OnDrawingView(UltravioletTime time, SpriteBatch spriteBatch) => DrawingView?.Invoke(this, time, spriteBatch);
private void DrawPartDoc(string filename) { DrawingDocument oDoc; Sheet oSheet; ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// SetupNewDrawingDocument(out oDoc, out oSheet); ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// //Open the part document, invisibly. PartDocument oBlockPart = mApp.Documents.Open(filename, false) as PartDocument; TransientGeometry oTG = mApp.TransientGeometry; //0.1 = 1:10 or 0.2 = 1:5 1:20=0.02 X-> Y ^ DrawingView oBaseView = oSheet.DrawingViews.AddBaseView(oBlockPart as _Document, oTG.CreatePoint2d(28.7, 21), 0.1, ViewOrientationTypeEnum.kFrontViewOrientation, DrawingViewStyleEnum.kHiddenLineDrawingViewStyle, "", null, null); //59.4 x 42.0 29.7 X 21.0 DrawingView oTopView = oSheet.DrawingViews.AddProjectedView(oBaseView, oTG.CreatePoint2d(28.7, 29), DrawingViewStyleEnum.kFromBaseDrawingViewStyle, null); //Projected views DrawingView oRightView = oSheet.DrawingViews.AddProjectedView(oBaseView, oTG.CreatePoint2d(45, 21), DrawingViewStyleEnum.kFromBaseDrawingViewStyle, null); //look through the curves in view finds top horiz curve. Find an edge oSheet.RevisionTables.Add(oTG.CreatePoint2d(48.4, 23.5)); //1mm div 10//1 row = 4 DrawingCurve oSelectedCurve = null; foreach (DrawingCurve oCurve in oBaseView.get_DrawingCurves(null)) { //Skip Circles if (oCurve.StartPoint != null && oCurve.EndPoint != null) { if (WithinTol(oCurve.StartPoint.Y, oCurve.EndPoint.Y, 0.001)) { if (oSelectedCurve == null) { //This is the first horizontal curve found. oSelectedCurve = oCurve; } else { //Check to see if this curve is higher (smaller x value) than the current selected if (oCurve.MidPoint.Y < oSelectedCurve.MidPoint.X) { oSelectedCurve = oCurve; } } } } } //Create geometry intents point for the curve. GeometryIntent oGeomIntent1 = oSheet.CreateGeometryIntent(oSelectedCurve, PointIntentEnum.kStartPointIntent); GeometryIntent oGeomIntent2 = oSheet.CreateGeometryIntent(oSelectedCurve, PointIntentEnum.kEndPointIntent); Point2d oDimPos = oTG.CreatePoint2d(oSelectedCurve.MidPoint.X - 2, oSelectedCurve.MidPoint.Y); //set up Dim GeneralDimensions oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions; //Styles sty = oDoc.StylesManager.Styles ; // DimensionStyle dimstyle = oDoc.StylesManager.DimensionStyles["Drax Dim Above"]; //MessageBox.Show(cmbDimStyles.Text); DimensionStyle dimstyle = oDoc.StylesManager.DimensionStyles[cmbDimStyles.Text]; //Set Layer //Layer layer = oDoc.StylesManager.Layers["D"]; //MessageBox.Show(cmbLayers.Text); Layer layer = oDoc.StylesManager.Layers[cmbLayers.Text]; //Create the dimension. LinearGeneralDimension oLinearDim; oLinearDim = oGeneralDimensions.AddLinear(oDimPos, oGeomIntent1, oGeomIntent2, DimensionTypeEnum.kAlignedDimensionType, true, dimstyle, layer); string newfilename; string swapfilename; newfilename = ""; swapfilename = ""; //Build New Filname Inventor.PropertySet InvPropertySet = oBlockPart.PropertySets["{D5CDD505-2E9C-101B-9397-08002B2CF9AE}"]; swapfilename = oBlockPart.FullFileName.Substring(0, oBlockPart.FullFileName.LastIndexOf("\\") + 1); //MessageBox.Show(swapfilename); newfilename = swapfilename + InvPropertySet["FULLFILENAME"].Value + ".idw"; oBlockPart.Close(true); oDoc.SaveAs(newfilename, true); oDoc.Close(true); }
private void Button3_Click(object sender, EventArgs e) { //Create a new drawing document. DrawingDocument oDoc = mApp.Documents.Add(DocumentTypeEnum.kDrawingDocumentObject, mApp.FileManager.GetTemplateFile(DocumentTypeEnum.kDrawingDocumentObject, SystemOfMeasureEnum.kDefaultSystemOfMeasure, DraftingStandardEnum.kDefault_DraftingStandard, null), true) as DrawingDocument; //Create a new B size sheet. Sheet oSheet = oDoc.Sheets.Add(DrawingSheetSizeEnum.kBDrawingSheetSize, PageOrientationTypeEnum.kDefaultPageOrientation, "A Size", 0, 0); //Add the default border. oSheet.AddDefaultBorder(null, null, null, null, null, null, null, null, null, null, null, null, null, null); //Add ANSI A TitleBlock TitleBlock oTitleBlock = oSheet.AddTitleBlock(oDoc.TitleBlockDefinitions["ANSI A"], null, null); //Open the part document, invisibly. PartDocument oBlockPart = mApp.Documents.Open(@"C:\Temp\TestPart.ipt", false) as PartDocument; TransientGeometry oTG = mApp.TransientGeometry; //Create base drawing view DrawingView oBaseView = oSheet.DrawingViews.AddBaseView(oBlockPart as _Document, oTG.CreatePoint2d(10, 10), 1, ViewOrientationTypeEnum.kFrontViewOrientation, DrawingViewStyleEnum.kHiddenLineDrawingViewStyle, "", null, null); //Create Projected views DrawingView oRightView = oSheet.DrawingViews.AddProjectedView(oBaseView, oTG.CreatePoint2d(20, 18), DrawingViewStyleEnum.kFromBaseDrawingViewStyle, null); DrawingView oIsoView = oSheet.DrawingViews.AddProjectedView(oBaseView, oTG.CreatePoint2d(10, 20), DrawingViewStyleEnum.kFromBaseDrawingViewStyle, null); //Find an edge in the part to dimension. Any method can be used, (attributes, B-Rep query, selection, etc.). This //looks through the curves in the drawing view and finds the top horizontal curve. DrawingCurve oSelectedCurve = null; foreach (DrawingCurve oCurve in oBaseView.get_DrawingCurves(null)) { //Skip Circles if (oCurve.StartPoint != null && oCurve.EndPoint != null) { if (WithinTol(oCurve.StartPoint.X, oCurve.EndPoint.X, 0.001)) { if (oSelectedCurve == null) { //This is the first horizontal curve found. oSelectedCurve = oCurve; } else { //Check to see if this curve is higher (smaller x value) than the current selected if (oCurve.MidPoint.X < oSelectedCurve.MidPoint.X) { oSelectedCurve = oCurve; } } } } } if (oSelectedCurve == null) { System.Windows.Forms.MessageBox.Show("no curve is selected!"); return; } //Create geometry intents point for the curve. GeometryIntent oGeomIntent1 = oSheet.CreateGeometryIntent(oSelectedCurve, PointIntentEnum.kStartPointIntent); GeometryIntent oGeomIntent2 = oSheet.CreateGeometryIntent(oSelectedCurve, PointIntentEnum.kEndPointIntent); GeneralDimensions oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions; Point2d oDimPos = oTG.CreatePoint2d(oSelectedCurve.MidPoint.X - 2, oSelectedCurve.MidPoint.Y); DimensionStyle dimstyle = oDoc.StylesManager.DimensionStyles["Default (ANSI)"]; Layer layer = oDoc.StylesManager.Layers["Dimension (ANSI)"]; //Create the dimension. LinearGeneralDimension oLinearDim; oLinearDim = oGeneralDimensions.AddLinear(oDimPos, oGeomIntent1, oGeomIntent2, DimensionTypeEnum.kAlignedDimensionType, true, dimstyle, layer); }
void DrawImage(List <Line> lines) { var stream = DrawingView.GetImageStream(lines, new Size(GestureImage.Width, GestureImage.Height), Color.Gray); GestureImage.Source = ImageSource.FromStream(() => stream); }
private static void GetDrawingDimension() { try { inventorApp = (Inventor.Application)Marshal.GetActiveObject("Inventor.Application"); Console.WriteLine("查找到可用的实例"); } catch { Console.WriteLine("未打开Inventor"); return; } DrawingDocument drawingDocument = (DrawingDocument)inventorApp.ActiveDocument; //在Inventor当前正在显示的工程图不一样的时候,ActiveSheet也会发生变化 Console.WriteLine("打开的图纸:" + drawingDocument.ActiveSheet.Name + " " + drawingDocument.FullFileName); DrawingView drawingView = drawingDocument.ActiveSheet.DrawingViews[1]; //特别注明:该类及其方法仅针对模型和草图文件 GeneralDimensionsEnumerator generalDimensionsEnumerator = drawingDocument.ActiveSheet.DrawingDimensions.GeneralDimensions.Retrieve(drawingView); Console.WriteLine("generalDimensionsEnumerator.Count = " + generalDimensionsEnumerator.Count); if (generalDimensionsEnumerator.Count != 0) { for (int i = 1; i <= generalDimensionsEnumerator.Count; i++) { Console.WriteLine(generalDimensionsEnumerator[i].Text); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// BaselineDimensionSets baselineDimensionSets = drawingDocument.ActiveSheet.DrawingDimensions.BaselineDimensionSets; Console.WriteLine("baselineDimensionSets.Count = " + baselineDimensionSets.Count); if (baselineDimensionSets.Count != 0) { for (int i = 1; i <= baselineDimensionSets.Count; i++) { BaselineDimensionSet baselineDimensionSet = baselineDimensionSets[i]; Console.WriteLine("baselineDimensionSet.Members = " + baselineDimensionSet.Members); Console.WriteLine("baselineDimensionSet.DimensionType" + baselineDimensionSet.DimensionType); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// Balloons ballons = drawingDocument.ActiveSheet.Balloons; Console.WriteLine("ballons.Count = " + ballons.Count); Balloon balloon = null; if (ballons.Count != 0) { for (int i = 1; i <= ballons.Count; i++) { Console.WriteLine("\n------------------------ballons[" + i + "]------------------------"); balloon = ballons[i]; //Console.WriteLine("balloon.Leader.RootNode = " + balloon.Leader.RootNode); //打印出 System.__ComObject //Console.WriteLine("balloon.Position = " + balloon.Position); //打印出 System.__ComObject AttributeSets attributeSets = balloon.AttributeSets; Console.WriteLine("attributeSets.Count = " + attributeSets.Count); for (int j = 1; j <= attributeSets.Count; j++) { AttributeSet attributeSet = attributeSets[j]; Console.WriteLine("attributeSet.Name = " + attributeSet.Name); } BalloonValueSets balloonValueSets = balloon.BalloonValueSets; for (int j = 1; j <= balloonValueSets.Count; j++) { BalloonValueSet balloonValueSet = balloonValueSets[j]; Console.WriteLine("balloonValueSet.ItemNumber = " + balloonValueSet.ItemNumber); Console.WriteLine("balloonValueSet.Value = " + balloonValueSet.Value); Console.WriteLine("balloonValueSet.OverrideValue = " + balloonValueSet.OverrideValue); //Console.WriteLine("balloonValueSet.ReferencedFiles = " + balloonValueSet.ReferencedFiles); Console.WriteLine("balloonValueSet.Type = " + balloonValueSet.Type); } Leader leader = balloon.Leader; Console.WriteLine("leader.ArrowheadType = " + leader.ArrowheadType); Console.WriteLine("leader.Type = " + leader.Type); AttributeSets attributeSets_leader = leader.AttributeSets; Console.WriteLine("attributeSets_leader.Count = " + attributeSets_leader.Count); for (int j = 0; j < attributeSets_leader.Count; j++) { AttributeSet attributeSet = attributeSets[j]; Console.WriteLine("attributeSet_leader.Name = " + attributeSet.Name); } Console.WriteLine("END------------------------ballons[" + i + "]------------------------\n"); } } //////////////////////////////////////////////////////////////////////////////////////////////////////// //DrawingViews views = drawingDocument.ActiveSheet.DrawingViews; //Console.WriteLine("views.count = " + views.Count); Console.WriteLine("drawingDocument.SelectSet.Count = " + drawingDocument.SelectSet.Count); SelectSet selectSet = null; DrawingCurveSegment drawingCurveSegment = null; if (drawingDocument.SelectSet.Count == 0) { Console.WriteLine("Select a drawing view"); DrawingView view = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingViewFilter, "Select a drawing view"); //selectSet = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingSheetFilter, "Select drawing sheet!"); drawingCurveSegment = inventorApp.CommandManager.Pick(SelectionFilterEnum.kDrawingCurveSegmentFilter, "Select drawing segment filter"); } else { selectSet = drawingDocument.SelectSet; } //DrawingCurveSegment drawingCurveSegment = selectSet[1];//drawingDocument.SelectSet[1]; DrawingCurve drawingCurve = drawingCurveSegment.Parent; //Get the mid point of the selected curve assuming that the selection curve is linear Point2d MidPoint = drawingCurve.MidPoint; //Set a reference to the TransientGeometry object. TransientGeometry TG = inventorApp.TransientGeometry; Console.WriteLine("TG : " + (TG == null)); ObjectCollection LeaderPoints = inventorApp.TransientObjects.CreateObjectCollection(); Console.WriteLine("LeaderPoints : " + (LeaderPoints == null)); LeaderPoints.Add(TG.CreatePoint2d(MidPoint.X + 10, MidPoint.Y + 10)); LeaderPoints.Add(TG.CreatePoint2d(MidPoint.X + 10, MidPoint.Y + 5)); //Add the GeometryIntent to the leader points collection. //This is the geometry that the balloon will attach to. GeometryIntent geometryIntent = drawingDocument.ActiveSheet.CreateGeometryIntent(drawingCurve); LeaderPoints.Add(geometryIntent); //Set a reference to the parent drawing view of the selected curve //DrawingView drawingView = drawingCurve.Parent; //Set a reference to the referenced model document Document ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; Console.WriteLine(ModelDoc.Type); //PartDocument ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; //AssemblyDocument ModelDoc = drawingView.ReferencedDocumentDescriptor.ReferencedDocument; //Check if a partslist or a balloon has already been created for thie model Boolean IsDrawingBOMDefined = drawingDocument.DrawingBOMs.IsDrawingBOMDefined(ModelDoc.FullFileName); // Balloon balloon; if (IsDrawingBOMDefined) { //当DrawingBOM已经被定义了 //Just create the balloon with the leader points. All other arguments can be ignored Console.WriteLine("当DrawingBOM已经被定义了\n创建气泡标注"); balloon = drawingDocument.ActiveSheet.Balloons.Add(LeaderPoints); } else { //当DrawingBOM没有被定义 AssemblyDocument assemblyDocument = (AssemblyDocument)ModelDoc; AssemblyComponentDefinition assemblyComponentDefinition = assemblyDocument.ComponentDefinition; ///* //First check if the 'structured' BOM view has been enabled in the model //Set a reference to the model's BOM object //BOM bom = ModelDoc.ComponentDefinition.BOM; BOM bom = assemblyComponentDefinition.BOM; if (bom.StructuredViewEnabled) { //Level needs to be specifieed. Numbering options jave already been defined. //Get the Level('All levels' of 'First level only') from the model BOM view - must use the same here PartsListLevelEnum Level; if (bom.StructuredViewFirstLevelOnly) { Level = PartsListLevelEnum.kStructured; } else { Level = PartsListLevelEnum.kStructuredAllLevels; } } else { //Level and numbering options must be specifieed. //The corresponding model BOM view will automatically be enabled NameValueMap NumberingScheme = inventorApp.TransientObjects.CreateNameValueMap(); //Add the option for a comma delimiter NumberingScheme.Add("Delimeter", ","); //Create the balloon by specifying the level and numbering scheme balloon = drawingDocument.ActiveSheet.Balloons.Add(LeaderPoints, PartsListLevelEnum.kStructuredAllLevels, NumberingScheme); } //*/ } }
/// <summary> /// Returns a list of sheet metal part documents that are referenced by the drawing view. /// </summary> /// <param name="drawingView"> /// The <see cref="DrawingView"/> instance that this extension method affects.</param> /// <exception cref="ArgumentNullException"><paramref name="drawingView"/> is <c>null</c>.</exception> public static List <PartDocument> GetReferencedSheetMetalDocuments(this DrawingView drawingView) { return(drawingView.GetReferencedDocuments <PartDocument>().Where(x => x.IsSheetMetal()).ToList()); }