public void hidebomtable()
{
SldWorks swApp = default(SldWorks);
ModelDoc2 swModel = default(ModelDoc2);
DrawingDoc swDraw = default(DrawingDoc);
SolidWorks.Interop.sldworks.View swView = default(SolidWorks.Interop.sldworks.View);
TableAnnotation swTableAnn = default(TableAnnotation);
Annotation swAnn = default(Annotation);
object[] vTableAnns = null;
int i = 0;
//swApp = CreateObject("SldWorks.Application")
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
swDraw = (DrawingDoc)swModel;
swView = swDraw.GetFirstView();
vTableAnns = swView.GetTableAnnotations();
//vTableAnns.Length
if ((vTableAnns == null) == false)
{
for (i = 0; i <= vTableAnns.Length - 1; i++)
{
swTableAnn = (TableAnnotation)vTableAnns[i];
if (swTableAnn.Type == (int)swTableAnnotationType_e.swTableAnnotation_BillOfMaterials)
{
//swTableAnn.MoveColumn(0, swTableItemInsertPosition_e.swTableItemInsertPosition_After, 1)
swAnn = swTableAnn.GetAnnotation();
swAnn.Select3(false, null);
swApp.RunCommand((int)swCommands_e.swCommands_Hide_Table, null);
}
}
}
}
public void CheckDrawingDoc()
{
try
{
_swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
_swModel = _swApp.ActiveDoc;
_swDraw = (DrawingDoc)_swModel;
// Получение первого листа
_swSheet = _swDraw.GetCurrentSheet();
StrActiveSheetName = _swSheet.GetName();
// Узнаем имя активного листа
_vSheetNames = _swDraw.GetSheetNames();
_swDraw.ActivateSheet(_vSheetNames[0]);
_swSheet = _swDraw.GetCurrentSheet();
_swView = _swDraw.GetFirstView();
if (_swSheet.CustomPropertyView == "По умолчанию" | _swSheet.CustomPropertyView == "Default")
{
_swView = _swView.GetNextView();
}
_swModel = _swView.ReferencedDocument;
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public View GetFirstView(SldWorks sw)
{
ModelDoc2 swModel = (ModelDoc2)sw.ActiveDoc;
DrawingDoc d = (DrawingDoc)swModel;
View v;
string[] shtNames = (String[])swDraw.GetSheetNames();
string message = string.Empty;
//This should find the first page with something on it.
IsTarget = IsTargetDrawing((sw.ActiveDoc as DrawingDoc).Sheet[shtNames[0]]);
int x = 0;
do
{
try {
d.ActivateSheet(shtNames[x]);
} catch (IndexOutOfRangeException e) {
throw new IndexOutOfRangeException("Went beyond the number of sheets.", e);
} catch (Exception e) {
throw e;
}
v = (View)d.GetFirstView();
v = (View)v.GetNextView();
x++;
} while ((v == null) && (x < d.GetSheetCount()));
message = (string)v.GetName2() + ":\n";
if (v == null)
{
throw new Exception("I couldn't find a model anywhere in this document.");
}
return(v);
}
/// <summary>
/// 只生成等轴测视图
/// </summary>
/// <param name="swDraw"></param>
/// <param name="fileName"></param>
private void CreatIsometric(DrawingDoc swDraw, string fileName)
{
double[] outLine = new double[4];
Sheet currentSheets = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(currentSheets.GetName());
_swView = (IView)swDraw.GetFirstView();
outLine = (double[])_swView.GetOutline();//获取图纸边界
_swView = (IView)swDraw.CreateDrawViewFromModelView3(fileName, "*等轴测", (outLine[2] - outLine[0]) / 2.0, (outLine[3] - outLine[1]) / 1.5, 0);
}
private void GetData(DrawingDoc swDraw)
{
// var swDraw = (DrawingDoc) swModel;
// var ModelDoc
var getFirstView = (View)swDraw.GetFirstView();
MessageBox.Show(getFirstView.ReferencedDocument.GetTitle());
swDraw.ResolveOutOfDateLightWeightComponents();
swDraw.ForceRebuild();
// Движение по листам
var vSheetName = (string[])swDraw.GetSheetNames();
foreach (var name in vSheetName)
{
swDraw.ResolveOutOfDateLightWeightComponents();
var swSheet = swDraw.Sheet[name];
swDraw.ActivateSheet(swSheet.GetName());
if ((!swSheet.IsLoaded()))
{
continue;
}
var sheetviews1 = (object[])swSheet.GetViews();
var firstView1 = (View)sheetviews1[0];
var baseView1 = firstView1.IGetBaseView();
var dispData1 = (IModelDoc2)baseView1.ReferencedDocument;
MessageBox.Show(dispData1.GetTitle());
try
{
var sheetviews = (object[])swSheet.GetViews();
var firstView = (View)sheetviews[0];
firstView.SetLightweightToResolved();
var baseView = firstView.IGetBaseView();
var dispData = (IModelDoc2)baseView.ReferencedDocument;
MessageBox.Show(dispData.GetTitle());
}
catch (Exception e)
{
MessageBox.Show(e.Message);
}
}
}
private bool ActivateAllViews()
{
View swView = swDraw.GetFirstView();
while (swView != null)
{
bool activate = swDraw.ActivateView(swView.GetName2());
if (activate == false)
{
return(false);
}
swView = swView.GetNextView();
}
return(true);
}
public int LoadEnable()
{
try
{
int functionReturnValue = 0;
swModel = SwApp.ActiveDoc;
try
{
if (swModel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
functionReturnValue = 0;
}
else
{
_swDraw = (DrawingDoc)swModel;
swSheet = _swDraw.GetCurrentSheet();
swView = _swDraw.GetFirstView();
functionReturnValue = 1;
}
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
swModel = swView.ReferencedDocument;
if (swModel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
functionReturnValue = 0;
}
}
catch
{
functionReturnValue = 0;
}
return(functionReturnValue);
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
public String GetNoteTTtext(ModelDoc2 swDoc)
{
DrawingDoc swDraw = (DrawingDoc)swDoc;
object[] vNotes;
String result = "";
IView swView = swDraw.GetFirstView() as IView;
vNotes = (object[])swView.GetNotes();
Note swNote = null;
for (int j = 0; j < vNotes.Length; j++)
{
swNote = (Note)vNotes[j];
String snm = swNote.GetName();
if (snm.Contains(ttname))
{
result += swNote.PropertyLinkedText + System.Environment.NewLine;
}
}
return(result);
}
private void FindNDelOldNotes(ModelDoc2 swDoc)
{
Note swNote = null;
DrawingDoc swDraw = (DrawingDoc)swDoc;
object[] vNotes;
IView swView = swDraw.GetFirstView() as IView;
vNotes = (object[])swView.GetNotes();
for (int i = 0; i < vNotes.Length; i++)
{
swNote = (Note)vNotes[i];
String snm = swNote.GetName();
if (snm.Contains(ttname))
{
Annotation myAnnotation = (Annotation)swNote.GetAnnotation();
swDoc.ClearSelection2(true);
myAnnotation.Select(false);
swDoc.DeleteSelection(false);
}
}
swDoc.WindowRedraw();
}
public void check()
{
int m = 0;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
// Проверка открытого документа
if (swmodel == null)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
//Or swDocumentTypes_e.swDocASSEMBLY
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocDRAWING)
{
swapp.SendMsgToUser("Откройте чертеж");
return;
}
if (string.IsNullOrEmpty(swmodel.GetPathName()))
{
swapp.SendMsgToUser("Сохраните чертеж!");
Close();
return;
}
swDraw = (DrawingDoc)swmodel;
// Получение первого листа
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
// Узнаем имя активного листа
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
//m = 0
//Debug.Print(swSheet.CustomPropertyView);
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
else
{
while (!(swView == null))
{
if (swView.GetName2() == swSheet.CustomPropertyView)
{
m = 1;
break;
}
swView = swView.GetNextView();
}
if (m == 0)
{
swView = swDraw.GetFirstView();
swView = swView.GetNextView();
swapp.SendMsgToUser("Не удалось определить вид из свойств листа. Ипользуется первый вид.");
}
}
if (swView == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
if (swView.ReferencedDocument == null)
{
swapp.SendMsgToUser("Отсутсвует модель!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
swmodel = swView.ReferencedDocument;
if (swmodel.GetType() != (int)swDocumentTypes_e.swDocASSEMBLY)
{
swapp.SendMsgToUser("Чертеж должен быть сборочным!");
// Возвращение активного листа
ok = swDraw.ActivateSheet(strActiveSheetName);
return;
}
}
private string LoadActiveModel()
{
/// <summary>Load active model
/// <list type="bullet">
/// <listheader>
/// <description>Set model properties</description>
/// </listheader>
/// <item>Model file name with path</item>
/// <item>Model file name</item>
/// <item>Referenced configuration</item>
/// </list>
/// <returns>Error message string</returns>
/// </summary>
ModelDoc2 swDoc;
SolidWorks.Interop.sldworks.View swDrawView;
swDocumentTypes_e swDocType;
string strModelFile;
string strModelName;
string strConfigName = null;
int intErrors = 0;
int intWarnings = 0;
// get the active document
swDoc = (ModelDoc2)this.swApp.ActiveDoc;
if (swDoc == null)
{
return("Could not acquire an active document");
}
// Check for the correct doc type
strModelFile = swDoc.GetPathName();
strModelName = strModelFile.Substring(strModelFile.LastIndexOf("\\") + 1, strModelFile.Length - strModelFile.LastIndexOf("\\") - 1);
swDocType = (swDocumentTypes_e)swDoc.GetType();
// get model document from drawing document
if (swDocType == swDocumentTypes_e.swDocDRAWING)
{
swDrawDoc = (DrawingDoc)swDoc;
swDrawView = (SolidWorks.Interop.sldworks.View)swDrawDoc.GetFirstView();
swDrawView = (SolidWorks.Interop.sldworks.View)swDrawView.GetNextView();
strModelFile = swDrawView.GetReferencedModelName();
strConfigName = swDrawView.ReferencedConfiguration;
strModelName = strModelFile.Substring(strModelFile.LastIndexOf("\\") + 1, strModelFile.Length - strModelFile.LastIndexOf("\\") - 1);
swDocType = (swDocumentTypes_e)GetTypeFromString(strModelFile);
if (swDocType != swDocumentTypes_e.swDocASSEMBLY & swDocType != swDocumentTypes_e.swDocPART)
{
return("error getting file type from drawing view's referenced model");
}
// Try to load the model file
try
{
swMainModel = swApp.OpenDoc6(strModelFile, (int)swDocType, (int)swOpenDocOptions_e.swOpenDocOptions_LoadModel, strConfigName, ref intErrors, ref intWarnings);
swMainModel = swApp.ActivateDoc3(strModelFile, true, (int)swRebuildOnActivation_e.swDontRebuildActiveDoc, intErrors);
}
catch (Exception e)
{
return(e.Message);
}
}
else
{
swMainModel = swDoc;
}
swModelWrap = new SwModelWrapper(this, swApp, swDocType, swMainModel, strConfigName: null);
return(null);
}
public void LoadDataGridConfig()
{
try
{
//SelectionMgr swSelMgr;
//Configuration swConfig; ;
string sConfigName;
object[] vConfNameArr;
//swapp = CreateObject("SldWorks.Application")
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swDraw = (DrawingDoc)swmodel;
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
// Получаем параметры модели
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
sConfigName = swView.ReferencedConfiguration;
swmodel = swView.ReferencedDocument;
swmodel.GetConfigurationByName(sConfigName);
vConfNameArr = swmodel.GetConfigurationNames();
// Конфигурация
for (var i = 0; i <= vConfNameArr.GetUpperBound(0); i++)
{
DataGridConfig.Rows.Add(ColChB.Selected, vConfNameArr[i]);
}
//Get customProperty from Assy
CustomPropertyManager swCustProp = default(CustomPropertyManager);
string valOut = "";
string Number = "";
string Description = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valOut, out Number);
swCustProp.Get2("Наименование", out valOut, out Description);
addinform = new addincheckbox();
try
{
//Fill DataGriad
foreach (string line in System.IO.File.ReadAllLines("C:\\Program Files\\SW-Complex\\doc.txt"))
{
addinform.DGDoc.Rows.Add(addinform.DocChb.Selected, line);
}
}
catch (Exception ex)
{
//Interaction.MsgBox("Отсутствует SW-Complex или Doc.txt");
this.Close();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public void GetXMLfromBOM()
{
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swModelDocExt = swmodel.Extension;
//создаем MemoryStream, в который будем писать XML
var myMemoryStream = new MemoryStream();
//создаем XmlTextWriter, указываем объект – myMemoryStream, в который будем писать XML, и кодировку
try
{
var myXml = new System.Xml.XmlTextWriter("C:\\Program Files\\SW-Complex\\SP-Temp.xml", System.Text.Encoding.UTF8);
swDraw = (DrawingDoc)swmodel;
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swView = swDraw.GetFirstView();
// Получаем параметры модели
swView = swView.GetNextView();
swmodel = swView.ReferencedDocument;
//swSelMgr = swDraw.SelectionManager;
myXml.WriteStartDocument();
myXml.Formatting = System.Xml.Formatting.Indented;
//длина отступа
myXml.Indentation = 2;
vConfName = swmodel.GetConfigurationNames();
swapp = new SldWorks();
swmodel = swapp.ActiveDoc;
Feature swFeat = swmodel.FirstFeature();
while ((swFeat != null))
{
if (swFeat.GetTypeName() == "BomFeat")
{
swFeat.Select(true);
swBomFeature = swFeat.GetSpecificFeature2();
}
swFeat = swFeat.GetNextFeature();
}
//////////////////////////////////////////////////////
//
// GetPropertyBomTableFromDrawDoc
//
//////////////////////////////////////////////////////
object vConfigurations = null;
object vVisibility = null;
bool bGetVisible = false;
long lNumRow = 0;
long lNumColumn = 0;
int lRow = 0;
TableAnnotation swTableAnnotation = default(TableAnnotation);
ModelDoc2 swDocument = default(ModelDoc2);
AssemblyDoc swAssembly = default(AssemblyDoc);
int lStartRow = 0;
string strItemNumber = "";
string strPartNumber = "";
string strDescription = "";
var strDocumentName = swBomFeature.GetReferencedModelName();
swDocument = swapp.GetOpenDocumentByName(strDocumentName);
swAssembly = (AssemblyDoc)swDocument;
//swBOMTableAnnotation = swBomFeature.GetTableAnnotations(0)
var swBomTableAnnotation = (BomTableAnnotation)swBomFeature.GetTableAnnotations()[0];
swTableAnnotation = (TableAnnotation)swBomTableAnnotation;
lNumRow = swTableAnnotation.RowCount;
lNumColumn = swTableAnnotation.ColumnCount;
lStartRow = 1;
//If (Not (swTableAnnotation.TitleVisible = False)) Then
if (swTableAnnotation.TitleVisible == false)
{
lStartRow = 2;
}
bGetVisible = false;
vConfigurations = swBomFeature.GetConfigurations(bGetVisible, vVisibility);
//swTableAnnotation = swTableAnnotation;
///////////////////////////////////////////////////////////////////
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
// get custom property
var valout = ""; //Обозначение
var valout1 = ""; //Наименование
CustomPropertyManager swCustProp = default(CustomPropertyManager);
var resolvedValOut = "";
var resolvedValOut1 = "";
//string resolvedValOut3 = "";
//string resolvedValOut4 = "";
//string resolvedValOut5 = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valout, out resolvedValOut);
swCustProp.Get2("Description", out valout1, out resolvedValOut1);
// переменные для колонок
int Jj = 0; // наименование
int aa = 0; // раздел
int oo = 0; // обозначение
int tt = 0; // формат
int yy = 0; //
int uu = 0; // Код материала
int ss = 0; // Примечание
string sRowStr = null; // наименовани
string sRowStr1 = null; // раздел
string sRowStr2 = null; // обозначение
string sRowStr3 = null; // формат
string sRowStr4 = null; // ERP code
string sRowStr5 = null; // Код материала
string sRowStr6 = null; // Примечание
// При выборе электромонтажа
string Complect = "";
if (addinform.ChkElectro1.Checked)
{
Complect = "МЭ";
}
else if (addinform.ChkElectro2.Checked)
{
Complect = "ТБ";
}
////////////////////////////////////////////////////////////
//
// XML
//
////////////////////////////////////////////////////////////
//создаем элементы
myXml.WriteStartElement("xml");
//
myXml.WriteStartElement("Item");
// имя пути основного чертежа
myXml.WriteStartElement("PathName");
//записываем строку
myXml.WriteString(swmodel.GetPathName());
myXml.WriteEndElement();
// Устанавливаем ДОК из формы добавление
myXml.WriteStartElement("doc");
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + "CБ");
myXml.WriteEndElement();
//
myXml.WriteStartElement("Наименование");
myXml.WriteString("Сборочный чертеж");
myXml.WriteEndElement();
//
myXml.WriteEndElement(); //doc
//dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast<DataGridViewRow>()where Convert.ToBoolean(Rows.Cells(0).Value) == true).ToList;
dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows2)
{
sb.AppendLine(row.Cells[1].Value.ToString());
sb.ToString();
//Оставляем первые две буквы для обозначения разделитель
var literal = row.Cells[1].Value.ToString();
var substring = literal.Substring(0, 2);
var literal2 = row.Cells[1].Value.ToString();
var substring2 = literal2.Substring(5);
myXml.WriteStartElement("doc");
///
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + substring);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(substring2);
myXml.WriteEndElement();
///
myXml.WriteEndElement();
//doc
}
//<------------- Elec
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == false & addinform.ChkElectro2.Checked == false)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают при электромонтаже");
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro1
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro2
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro2.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(resolvedValOut1);
myXml.WriteEndElement();
//\reference
myXml.WriteStartElement("references");
// ВЫГРУЖАЕМ ВЫБРАННЫЕ КОНФИГУРАЦИИ
dynamic CheckedRows = (from Rows in DataGridConfig.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb2 = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows)
{
sb2.AppendLine(row.Cells[1].Value.ToString());
swmodel = swView.ReferencedDocument;
var configuration = swView.ReferencedConfiguration;
var sConfigName = swView.ReferencedConfiguration;
Configuration swConfig = swmodel.GetConfigurationByName(sConfigName);
for (var i = 0; i <= vConfName.GetUpperBound(0); i++)
{
const string ucase = "";
if (vConfName[i] == row.Cells[1].Value.ToString())
{
configuration = vConfName[i];
}
}
swView.ReferencedConfiguration = sConfigName;
myXml.WriteStartElement("config");
myXml.WriteAttributeString("value", row.Cells[1].Value.ToString());
/////////////////////////////////////////////////////////////
//
// PART
//
/////////////////////////////////////////////////////////////
for (lRow = lStartRow; lRow <= (lNumRow - 1); lRow++)
{
if (swBomTableAnnotation.GetComponentsCount2((int)lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber) > 0)
{
myXml.WriteStartElement("part");
//PathNameComponent
string strModelPathName = null;
var vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
if (((vModelPathNames != null)))
{
myXml.WriteStartElement("PathNameComponent");
foreach (var vModelPathName_loopVariable in vModelPathNames)
{
var vModelPathName = vModelPathName_loopVariable;
strModelPathName = vModelPathName;
myXml.WriteString(strModelPathName);
}
myXml.WriteEndElement();
}
//'\ Row
myXml.WriteStartElement("Row");
myXml.WriteString(Convert.ToString(lRow - lStartRow + 1));
myXml.WriteEndElement();
vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
//\ ItemNum
myXml.WriteStartElement("ItemNum");
myXml.WriteString(strItemNumber);
myXml.WriteEndElement();
//\ раздел
aa = 3;
/// раздел
sRowStr1 = "";
sRowStr1 = sRowStr1 + swTableAnnotation.Text[lRow, aa];
myXml.WriteStartElement("Раздел");
myXml.WriteString(sRowStr1);
myXml.WriteEndElement();
//\ обозначение
oo = 1;
/// обозначение
sRowStr2 = "";
sRowStr2 = sRowStr2 + swTableAnnotation.Text[lRow, oo];
myXml.WriteStartElement("Обозначение");
myXml.WriteString(sRowStr2);
myXml.WriteEndElement();
//\ наименование
Jj = 2;
/// наименование
sRowStr = "";
sRowStr = sRowStr + swTableAnnotation.Text[lRow, Jj];
myXml.WriteStartElement("Наименование");
myXml.WriteString(sRowStr);
myXml.WriteEndElement();
//\
tt = 4;
/// формат
sRowStr3 = "";
sRowStr3 = sRowStr3 + swTableAnnotation.Text[lRow, tt];
myXml.WriteStartElement("Формат");
myXml.WriteString(sRowStr3);
myXml.WriteEndElement();
//\
yy = 5;
/// ERP code
sRowStr4 = "";
sRowStr4 = sRowStr4 + swTableAnnotation.Text[lRow, yy];
myXml.WriteStartElement("ERP_code");
myXml.WriteString(sRowStr4);
myXml.WriteEndElement();
//\
uu = 6;
/// Код материала
sRowStr5 = "";
sRowStr5 = sRowStr5 + swTableAnnotation.Text[lRow, uu];
myXml.WriteStartElement("Код_материала");
myXml.WriteString(sRowStr5);
myXml.WriteEndElement();
//\
ss = 7;
/// наименование
sRowStr6 = "";
sRowStr6 = sRowStr6 + swTableAnnotation.Text[lRow, ss];
myXml.WriteStartElement("Примечание");
myXml.WriteString(sRowStr6);
myXml.WriteEndElement();
//\
myXml.WriteStartElement("Количество");
//myXml.WriteString(swTableAnnotation.GetComponentsCount2(lRow, strConfiguration, strItemNumber, strPartNumber))
myXml.WriteString(Convert.ToString(swBomTableAnnotation.GetComponentsCount2(lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber)));
myXml.WriteEndElement();
myXml.WriteEndElement();
//config
}
}
myXml.WriteEndElement(); //part
}
myXml.WriteEndElement(); //references
//<~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get the Total Number of Rows
Annotation swAnn = default(Annotation);
TableAnnotation swTable = default(TableAnnotation);
long nNumRow = 0;
swmodel = swapp.ActiveDoc;
swView = swDraw.GetFirstView();
swTable = swView.GetFirstTableAnnotation();
swAnn = swTable.GetAnnotation();
nNumRow = swTable.RowCount;
myXml.WriteStartElement("TotalRows");
myXml.WriteString(Convert.ToString(nNumRow));
myXml.WriteEndElement();
//end TotalRows
myXml.WriteEndElement();
//Item
myXml.WriteEndElement();
//элемент XML
//End If
//заносим данные в myMemoryStream
myXml.Flush();
myXml.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
/// <summary>
/// 生成零件号
/// </summary>
private void CreatePartNumber()
{
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
if (swDraw == null)
{
return;
}
//序号为零件属性，还是项目号, 还是文字
int iTextContent = -1;
string strText = "";
if (this.rdoTemp1.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextItemNumber;
strText = "";
}
else if (this.rdoTemp2.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustomProperties;
strText = Interop.Office.Core.Properties.Settings.Default.CreateNbr_PPtName; //"序号";
}
else if (this.rdoTemp3.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextCustom;
strText = "0";
}
else if (this.rdoTemp4.Checked)
{
iTextContent = (int)swBalloonTextContent_e.swBalloonTextQuantity;
strText = "0";
}
//以正方形分布
int iLayout = (int)swBalloonLayoutType_e.swDetailingBalloonLayout_Square;
//下划线
int iStyle = (int)swBalloonStyle_e.swBS_Underline;
//下划线长度
int iSize = (int)swBalloonFit_e.swBF_Tightest;
//如果用户没有选中一个视图，就选中所有的视图
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swModel.ClearSelection2(true);
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
while (swView != null)
{
swModel.Extension.SelectByID2(swView.Name, "DRAWINGVIEW", 0, 0, 0, true, 0, null, 0);
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
//自动添加序号
swDraw.AutoBalloon3(iLayout, true, iStyle, iSize, iTextContent, strText, iTextContent, strText, "");
//Notes = Part.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
//swDraw.AutoBalloon3(iLayout, true, iStyle, -1, iTextContent, "xh", iTextContent, "xh", "");
//swDraw.AutoBalloon3(1, true, 10, 2, 1, "", 2, "", "-无-");
//.AutoBalloon3(1, True, 10, 2, 1, "", 2, "", "-无-")
////SolidWorks2006
//swDraw.AutoBalloon2((int)swBalloonLayoutType_e.swDetailingBalloonLayout_Top, true);
}
/// <summary>
/// 如果有一个视图为选中状态,则对这个视图进行重排序,
/// 否则,对一个图纸下的所有视图进行重排序
/// </summary>
private void ReSortAllView()
{
this.arCheckRepect.Clear();
if (this.rdoTemp1.Checked)
{
if (StringOperate.Alert("序号为项目号时，无法重排序，要继续吗？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question) != DialogResult.Yes)
{
return;
}
}
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.ActiveDoc;
if (swModel == null)
{
return;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
SelectionMgr SelMgr = (SelectionMgr)swModel.SelectionManager;
swModel.ClearSelection2(true);
//101，$数量×"序号"，$数量×"属性名"
string strTxt = this.cmbStartIndex.Text;
int abc = 1;
bool bText = false;
try
{
abc = Convert.ToInt16(this.cmbStartIndex.Text);//序号从一开始
}
catch
{
bText = true;
}
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.ActiveDrawingView;
if (swView == null)//对所有的视图进行重排序
{
swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
//遍历视图
while (swView != null)
{
swDraw.ActivateView(swView.Name);
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
abc = ReSortOneView(abc, swView, swModel);//对这个视图进行排序
}
//转到下一个视图
swView = (SolidWorks.Interop.sldworks.View)swView.GetNextView();
}
}
else//只对当前视图进行重排序
{
if (bText)
{
SaidiResortOneView(swView, swModel);//对这个视图进行排序
}
else
{
ReSortOneView(abc, swView, swModel);
}
}
//重建,以更新明细表
swModel.EditRebuild3();
this.arCheckRepect.Clear();
}
/// <summary>
/// 出工程图
/// </summary>
/// <param name="dicValues"></param>
/// <param name="prtTemp"></param>
/// <param name="compTemp"></param>
/// <param name="bomPaths"></param>
/// <param name="savePaths">保存路径</param>
/// <param name="newPath">新路径</param>
private void Drawing(List <string> dicValues, string prtTemp, string compTemp, string bomPaths, string savePaths, string newPath)
{
string viewType = string.Empty;
bool isometric = false;
bool bom = false;
string dimesion = string.Empty;
double spaceX = 0.06; //x方向留白区域
double scale = 1; //定义比例初始值
List <double[]> viewBox = new List <double[]>(); //集合存放视图box
List <double[]> viewOrigin = new List <double[]>(); //集合存放视图原点值
double[] outLine = new double[4]; //视图box值
double[] postion = new double[2]; //视图原点值
_swApp = (SldWorks)ConnectSW.iSwApp; //连接sw
if (_swApp == null)
{
return;
}
foreach (string item in dicValues)
{
int errors = 0;
int warnings = 0;
double view1X = 0;
double view1Y = 0;
string filePath = item; //文件路径
string fileEx = filePath.Substring(filePath.LastIndexOf("."), 7); //获得后缀名
string filename = filePath.Substring(filePath.LastIndexOf("\\") + 1, filePath.LastIndexOf(".") - filePath.LastIndexOf("\\") - 1);
if (fileEx == ".SLDPRT")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, prtTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
if (fileEx == ".SLDASM")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, compTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
_swModelEx = (ModelDocExtension)_swModelDoc.Extension;
if (newPath != null)
{
savePaths = newPath.Substring(0, newPath.LastIndexOf("\\"));
}
//新建工程图
_swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swAutomaticScaling3ViewDrawings, true); //自动缩放新工程图比例
if (standarView == false && isometric) //如果只生成等轴测视图
{
CreatIsometric(__swDrawDoc, filePath);
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
ChangeViewShow(tag, _swView);
_swApp.CloseDoc(_swModelDoc.GetTitle());//
ModelDoc2 tempDoc = (ModelDoc2)__swDrawDoc;
bool ss0 = false;
if (newPath != null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(newPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
bool isHidden = tempDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swApp.CloseDoc(tempDoc.GetTitle());
_numSucess += 1; //转换成功的数量
sucessFile.Add(filePath);
return;
}
bool isCreate = false;
#region 第三视角投影
if (thirProject)
{
isCreate = __swDrawDoc.Create3rdAngleViews2(filePath);//创建第三视角投影视图(视图位置有差别)
//调整视图位置
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
//调整视图1、2位置
if (viewBox[0][3] > viewBox[0][2])//纵向
{
double[] posView1 = new double[] { viewBox[0][2] / 3.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 1.9 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
else
{
double[] posView1 = new double[] { viewBox[0][2] / 4.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 2.0 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
viewOrigin.Clear();
viewBox.Clear();
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
if (isometric)//等轴测
{
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[3][0], viewOrigin[2][1], 0);
_swView = __swDrawDoc.GetFirstView();
double[] sca = new double[2];
sca = _swView.ScaleRatio;//获取比例
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = sca;
double[] rePos = new double[] { viewOrigin[3][0] + 0.015, viewOrigin[2][1] };
_swView.Position = rePos;
ChangeViewShow(tag, _swView); //视图样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //尺寸标注
}
}
#endregion
#region 第一视角投影
else
{
isCreate = __swDrawDoc.Create1stAngleViews(filePath);//创建第一视角投影视图
//获取视图boundingbox
_swView = __swDrawDoc.GetFirstView();
while ((_swView != null))
{
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
viewBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
double newScale = CalcuScale(viewBox, __swDrawDoc, scale, spaceX, 3);
//调整视图位置（position）
if (viewBox[0][3] > viewBox[0][2])
{
view1X = viewBox[0][2] / 2.8; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.85; //视图1的Y坐标放在图纸坐标的五分之一处
}
else
{
view1X = viewBox[0][2] / 3.5; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.0; //视图1的Y坐标放在图纸坐标的四分之一处
}
double[] view1Pos = new double[] { view1X, view1Y };
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
_swView.Position = view1Pos;
bool isRebuild = _swModelDoc.EditRebuild3();
//viewBox.Clear();
List <double[]> tempBox = new List <double[]>();
viewOrigin.Clear();
while ((_swView != null))
{
ChangeViewShow(tag, _swView); //改变视图显示样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //添加尺寸
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
tempBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
if (isometric) //是否创建等轴测视图（非钣金）
{
double[] scalArry = new double[2];
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[2][0], viewOrigin[1][1], 0);
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
double sca = _swView.get_IScaleRatio();
if (sca == 1) //缩小比例
{
scalArry[0] = 1;
scalArry[1] = newScale;
}
else
{
scalArry[0] = sca;
scalArry[1] = 1;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = scalArry;//调整轴测图比例
ChangeViewShow(tag, _swView);
_swModelDoc.EditRebuild3();
}
////关掉文件（不保存）
//_swApp.CloseDoc(_swModelDoc.GetTitle());
if (fileEx == ".SLDASM" && bom) //是否创建明细表
{
//viewBox.Clear();
//viewOrigin.Clear();
double[] outArry = new double[4];
double[] posArry = new double[2];
double[] posArry1 = null;
double[] posArry2 = null;
double[] posArry3 = null;
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
swBomTableAnno = (BomTableAnnotation)_swView.InsertBomTable4(true, 0.4, 0.1, (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_BottomRight, (int)swBomType_e.swBomType_TopLevelOnly, "", bomPaths, false, 0, false);
TableAnnotation tableAnnotation = (TableAnnotation)swBomTableAnno;
tableAnnotation.GetAnnotation();
BomFeature bomFeature = swBomTableAnno.BomFeature;
bool[] array = new bool[bomFeature.GetConfigurationCount(false)];
object Visible = array;
object configurations = bomFeature.GetConfigurations(false, ref Visible);
array[0] = true;
bomFeature.SetConfigurations(true, array, configurations);
FeatureManager featureManager = _swModelDoc.FeatureManager;
featureManager.UpdateFeatureTree();
double num = 0.007;
tableAnnotation.SetRowHeight(-2, num, 0);
double totleHeight = num * tableAnnotation.RowCount; //计算总的tableBom高度
double heightSum = totleHeight + 0.070; //加上标题栏总高度
int columCount = tableAnnotation.ColumnCount; //获取总的列数
double columWidth = 0;
for (int i = 0; i < columCount; i++)
{
double wid = tableAnnotation.GetColumnWidth(i);
columWidth += wid;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
outArry = (double[])_swView.GetOutline();
if (outArry[1] < heightSum)//有可能被遮挡
{
//__swView = _swDrawDoc.GetFirstView();
//double[] tempArry = new double[] { };
//tempArry=(double[])__swView.GetOutline();
//viewBox.Insert(0, tempArry);
scale = ((viewBox[1][2] - viewBox[1][0]) + (viewBox[3][2] - viewBox[3][0])) / (viewBox[0][2] - columWidth - 0.025);//计算X方向的比例
if (scale > 11)
{
double scaleCeil = System.Math.Ceiling(scale);
if (scaleCeil > 11 && scaleCeil < 16)
{
scale = 20;
}
if (scaleCeil > 15 && scaleCeil < 21)
{
scale = 25;
}
if (scaleCeil > 20 && scaleCeil < 26)
{
scale = 30;
}
if (scaleCeil > 25 && scaleCeil < 34)
{
scale = 40;
}
if (scaleCeil > 33 && scaleCeil < 45)
{
scale = 50;
}
if (scaleCeil > 44 && scaleCeil < 55)
{
scale = 60;
}
}
else if (scale > 5.8 && scale < 10.5)
{
double scaleCeil = System.Math.Ceiling(scale);
//scale = scaleCeil + 4.0; //比例为10、11、12、13、14、15
if (scaleCeil > 5 && scaleCeil < 8)
{
scale = 10;
}
if (scaleCeil > 7 && scaleCeil < 12)
{
scale = 15;
}
}
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
bool isScale = _currentSheet.SetScale(1, scale, false, false); //设置视图和图纸比例
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView(); //获取视图1
double[] pos1 = new double[2];
pos1 = _swView.Position;
posArry1 = new double[] { pos1[0] - columWidth / 3.45, pos1[1] };
_swView.Position = posArry1; //重置视图1的位置
_swView = _swView.GetNextView(); //获取视图2
double[] pos2 = new double[2];
pos2 = _swView.Position;
posArry2 = new double[] { pos2[0] - columWidth / 3.45, pos2[1] + 0.0015 };
_swView.Position = posArry2; //设置视图2位置
_swView = _swView.GetNextView(); //获取视图三
posArry = (double[])_swView.Position;
posArry3 = new double[] { posArry[0] - columWidth / 3.5, posArry[1] };
_swView.Position = posArry3;//视图3坐标
}
}
}//第一视角投影
#endregion
if (isCreate)
{
_numSucess += 1;//转换成功的数量
sucessFile.Add(filePath);
}
ModelDoc2 tempModelDoc = (ModelDoc2)__swDrawDoc; //获取到swDraw的父级（ModelDoc）
_swApp.CloseDoc(_swModelDoc.GetTitle());
bool isHiden = tempModelDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swModelDoc.ForceRebuild3(false);
string saveName = (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf("."));
bool ss;
if (newPath != null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
_swApp.CloseDoc(tempModelDoc.GetTitle());//关闭转换完成的文件
}
}
public static void GetSolidObject()
{
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
// Проверка открытого документа
if (swModel == null)
{
swApp.SendMsgToUser2("Откройте модель, сборку или чертеж!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
return;
}
if (string.IsNullOrEmpty(swModel.GetPathName()))
{
swApp.SendMsgToUser2("Сохраните файл!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
return;
}
docType = (swDocumentTypes_e)swModel.GetType();
if (docType != swDocumentTypes_e.swDocDRAWING)
{
configName = swModel.GetActiveConfiguration().Name;//при первом вызове присваеваеться активная конфигурация
EditProp.configNames = EditProp.GetAllConfigurations();
}
else
{
#region Если открыт чертеж
lockForConf = true;//нельзя изменить конфигурацию на формочке
drw = (DrawingDoc)swModel;
// Получение первого листа
Sheet swSheet = drw.GetCurrentSheet();
Propertiy.Format = GetFormat(swSheet);
Propertiy.Sheets = drw.GetSheetCount().ToString();
Propertiy.Sheet = swSheet.GetName();
// Узнаем имя активного листа
string[] vSheetNames = drw.GetSheetNames();
drw.ActivateSheet(vSheetNames[0]);
swSheet = drw.GetCurrentSheet();
swView = drw.GetFirstView();
Propertiy.Scale = swView.ScaleRatio[0].ToString() + ":" + swView.ScaleRatio[1].ToString();
m = 0;
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
// Получаем первый вид
swView = swView.GetNextView();
}
else
{
while (swView != null)
{
if (swView.GetName2() == swSheet.CustomPropertyView)
{
m = 1;
}
swView = swView.GetNextView();
}
if (m == 0)
{
swView = drw.GetFirstView();
swView = swView.GetNextView();
swApp.SendMsgToUser2("Не удалось определить вид из свойств листа. Ипользуется первый вид.", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
}
}
if (swView == null)
{
swApp.SendMsgToUser2("Отсутсвует модель!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
// Возвращение активного листа
drw.ActivateSheet(Propertiy.Sheet);
return;
}
if (swView.ReferencedDocument == null)
{
swApp.SendMsgToUser2("Отсутсвует модель!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
// Возвращение активного листа
drw.ActivateSheet(Propertiy.Sheet);
return;
}
#endregion
}
}
private void TraverseFile(DirectoryInfo dir, string OldName, string NewName)
{
foreach (FileInfo fi in dir.GetFiles())
{
if (fi.Extension.ToLower() != ".drwdot" && fi.Extension.ToLower() != ".slddrw")
{
continue; //slddrt.
}
string str = fi.FullName;
ModelDoc2 swModel = (ModelDoc2)AllData.iSwApp.OpenDoc(str, (int)swDocumentTypes_e.swDocDRAWING);
if (swModel == null)
{
iErr++; continue;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
if (swDraw == null)
{
iErr++; continue;
}
swDraw.EditTemplate();
SolidWorks.Interop.sldworks.View swView = (SolidWorks.Interop.sldworks.View)swDraw.GetFirstView();
Note swnote = (Note)swView.GetFirstNote();
while (swnote != null)
{
string s = swnote.GetText().ToString();
if (s == OldName)
{
swnote.SetText(NewName);
iOK++;
//这里需要保存
swDraw.EditSheet();
swModel.Save();
}
swnote = (Note)swnote.GetNext();
}
AllData.iSwApp.CloseDoc(swModel.GetTitle());
}
foreach (DirectoryInfo dirsub in dir.GetDirectories())
{
TraverseFile(dirsub, OldName, NewName);
}
}
public void CheckAndUpdateGaugeNotes2()
{
String currPage = swDraw.GetCurrentSheet().ToString();
Int32 shtCount = swDraw.GetSheetCount();
String[] shtName = (String[])swDraw.GetSheetNames();
for (int page = 0; page < shtCount; page++)
{
swFrame.SetStatusBarText(String.Format("Activating page {0}...", shtName[page]));
swDraw.ActivateSheet(shtName[page]);
swView = (View)swDraw.GetFirstView();
while (swView != null)
{
swDispDim = swView.GetFirstDisplayDimension5();
while (swDispDim != null)
{
swDim = (Dimension)swDispDim.GetDimension2(0);
swFrame.SetStatusBarText(String.Format("Processing '{0}' => '{1}'...", swDim.Name, swDim.Value.ToString()));
string dimtext = swDispDim.GetText((Int32)swDimensionTextParts_e.swDimensionTextCalloutBelow);
dimtext = dimtext.Replace(@"(", string.Empty).Replace(@")", string.Empty).Trim();
if (gaugeRegex.IsMatch(dimtext))
{
string[] texts_ = dimtext.Split(' ');
gaugeNote = Regex.Replace(texts_[texts_.Length - 1], "[0-9]", string.Empty);
Double og;
if (!Double.TryParse(swDim.GetSystemValue2("").ToString(), out og))
{
throw new GaugeSetterException("Couldn't parse dimension value.");
}
ourGauge = og / 0.0254;
for (int i = 0; i < Gauges.Gauge.Length; i++)
{
Double dCellVal;
if (!Double.TryParse(Gauges.Gauge[i].Thickness, out dCellVal))
{
throw new GaugeSetterException("Couldn't parse gauge thickness.");
}
else
if (Math.Abs(ourGauge - dCellVal) < 0.00003)
{
String gaugeCell = String.Empty;
String gaugeString = String.Empty;
gaugeNotFound = false;
swDispDim.ShowParenthesis = true;
gaugeString = String.Format("{0} {1}", Gauges.Gauge[i].GaugeNumber, gaugeNote.ToUpper());
swDispDim.SetText((int)swDimensionTextParts_e.swDimensionTextCalloutBelow, gaugeString);
}
}
if (gaugeNotFound)
{
if (!APathSet.SilenceGaugeErrors)
{
StringBuilder sb = new StringBuilder("Non-standard gauge thickness detected:\n");
sb.AppendFormat(get_format_txt(), swDim.Name, swView.Name, ourGauge);
swApp.SendMsgToUser2(sb.ToString()
, (int)swMessageBoxIcon_e.swMbWarning
, (int)swMessageBoxBtn_e.swMbOk);
}
gaugeNotFound = false;
}
}
swDispDim = swDispDim.GetNext5();
}
swView = (View)swView.GetNextView();
}
}
swDraw.ActivateSheet(currPage);
if (gaugeNotFound) // Why waste time rebuilding?
{
swFrame.SetStatusBarText("Rebuilding");
swDraw.ForceRebuild();
}
swFrame.SetStatusBarText(String.Empty);
}
static void Main(string[] args)
{
SldWorks.SldWorks swApp;
ModelDoc2 swModel;
swApp = SW.Get_swApp();
//swApp.SendMsgToUser("teste conectado!");
IEnumerable <int> codigos = Enumerable.Range(4020001, 256);
string fullPath;
try
{
foreach (var codigo in codigos)
{
int erro = 0, aviso = 0;
fullPath = $@"C:\ELETROFRIO\ENGENHARIA SMR\PRODUTOS FINAIS ELETROFRIO\MECÂNICA\RACK PADRAO\RACK PADRAO TESTE\{codigo}.SLDDRW";
//swApp.DocumentVisible(false, (int)swDocumentTypes_e.swDocDRAWING);
swModel = swApp.OpenDoc6(fullPath, (int)swDocumentTypes_e.swDocDRAWING, (int)swOpenDocOptions_e.swOpenDocOptions_RapidDraft, "", erro, aviso);
if (swModel == null)
{
Console.WriteLine("Erro: " + erro);
Console.WriteLine("Aviso: " + aviso);
continue;
}
DrawingDoc swDraw = (DrawingDoc)swModel;
View swActiveView;
View swSheetView;
//A first view é a folha, e não a vista propriamente dita
swSheetView = swDraw.GetFirstView();
swActiveView = swSheetView.GetNextView();
var nomeDaVista = swActiveView.GetName2();
//ModelDoc2 swModelDaVista;
//swModelDaVista = swActiveView.ReferencedDocument;
//var nomeDo3DdaVista = swModelDaVista.GetPathName();
//Object[] anotacoesDaVista = swActiveView.GetAnnotations();
//foreach (var a in anotacoesDaVista)
//{
// Annotation annot = (Annotation)a;
// Console.WriteLine(annot.GetName());
//}
BomFeature swBomFeature;
swBomFeature = GetBOM(swModel);
Feature swFeat;
swFeat = swBomFeature.GetFeature();
object[] vTableArr = swBomFeature.GetTableAnnotations();
BomTableAnnotation tableAnn = null;
foreach (BomTableAnnotation v in vTableArr)
{
tableAnn = (BomTableAnnotation)v;
}
if (tableAnn != null)
{
LerBOM(tableAnn, swModel);
}
else
{
Console.WriteLine("Não pegou a table annotation");
}
EscreveTXT(listaDeCodigos);
swApp.CloseAllDocuments(true);
Console.WriteLine(codigo);
}
}
finally
{
EscreveTXT(listaDeCodigos);
}
Console.ReadLine();
}
public static void Start()
{
// Проверка открытого документа
if (swModel == null)
{
swApp.SendMsgToUser2("Откройте модель, сборку или чертеж!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
return;
}
if (string.IsNullOrEmpty(swModel.GetPathName()))
{
swApp.SendMsgToUser2("Сохраните файл!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
return;
}
// Определение типа документа
if (docType == swDocumentTypes_e.swDocDRAWING)
{
drw = (DrawingDoc)swModel;
// Получение первого листа
Sheet swSheet = drw.GetCurrentSheet();
string strActiveSheetName = swSheet.GetName();
// Узнаем имя активного листа
string[] vSheetNames = drw.GetSheetNames();
drw.ActivateSheet(vSheetNames[0]);
swSheet = drw.GetCurrentSheet();
swView = drw.GetFirstView();
m = 0;
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
// Получаем первый вид
}
else
{
while (swView != null)
{
if (swView.GetName2() == swSheet.CustomPropertyView)
{
m = 1;
}
swView = swView.GetNextView();
}
if (m == 0)
{
swView = drw.GetFirstView();
swView = swView.GetNextView();
swApp.SendMsgToUser2("Не удалось определить вид из свойств листа. Ипользуется первый вид.", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
}
}
if (swView == null)
{
swApp.SendMsgToUser2("Отсутсвует модель!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
// Возвращение активного листа
drw.ActivateSheet(strActiveSheetName);
return;
}
if (swView.ReferencedDocument == null)
{
swApp.SendMsgToUser2("Отсутсвует модель!", (int)swMessageBoxIcon_e.swMbStop, (int)swMessageBoxBtn_e.swMbOk);
// Возвращение активного листа
drw.ActivateSheet(strActiveSheetName);
return;
}
string sModelName = swView.GetReferencedModelName();
Class.configuracione = swView.ReferencedConfiguration;
swModel = swView.ReferencedDocument;
}
}
