void constrained_smooth(DGraph3 graph, double surfDist, double dotThresh, double alpha, int rounds)
{
int NV = graph.MaxVertexID;
Vector3d[] pos = new Vector3d[NV];
for (int ri = 0; ri < rounds; ++ri)
{
gParallel.ForEach(graph.VertexIndices(), (vid) => {
Vector3d v = graph.GetVertex(vid);
if (GroundVertices.Contains(vid) || TipVertices.Contains(vid))
{
pos[vid] = v;
return;
}
// for tip base vertices, we could allow them to move down and away within angle cone...
if (TipBaseVertices.Contains(vid))
{
pos[vid] = v;
return;
}
// compute smoothed position of vtx
Vector3d centroid = Vector3d.Zero; int nbr_count = 0;
foreach (int nbr_vid in graph.VtxVerticesItr(vid))
{
centroid += graph.GetVertex(nbr_vid);
nbr_count++;
}
if (nbr_count == 1)
{
pos[vid] = v;
return;
}
centroid /= nbr_count;
Vector3d vnew = (1 - alpha) * v + (alpha) * centroid;
// make sure we don't violate angle constraint to any nbrs
int attempt = 0;
try_again:
foreach (int nbr_vid in graph.VtxVerticesItr(vid))
{
Vector3d dv = graph.GetVertex(nbr_vid) - vnew;
dv.Normalize();
double dot = dv.Dot(Vector3d.AxisY);
if (Math.Abs(dot) < dotThresh)
{
if (attempt++ < 3)
{
vnew = Vector3d.Lerp(v, vnew, 0.66);
goto try_again;
}
else
{
pos[vid] = v;
return;
}
}
}
// offset from nearest point on surface
Frame3f fNearest = MeshQueries.NearestPointFrame(Mesh, MeshSpatial, vnew, true);
Vector3d vNearest = fNearest.Origin;
double dist = vnew.Distance(vNearest);
bool inside = MeshSpatial.IsInside(vnew);
if (inside || dist < surfDist)
{
Vector3d normal = fNearest.Z;
// don't push down?
if (normal.Dot(Vector3d.AxisY) < 0)
{
normal.y = 0; normal.Normalize();
}
vnew = fNearest.Origin + surfDist * normal;
}
pos[vid] = vnew;
});
foreach (int vid in graph.VertexIndices())
{
graph.SetVertex(vid, pos[vid]);
}
}
}
void generate_graph(DenseGrid3f supportGrid, DenseGridTrilinearImplicit distanceField)
{
int ni = supportGrid.ni, nj = supportGrid.nj, nk = supportGrid.nk;
float dx = (float)CellSize;
Vector3f origin = this.GridOrigin;
// parameters for initializing cost grid
float MODEL_SPACE = 0.01f; // needs small positive so that points on triangles count as inside (eg on ground plane)
//float MODEL_SPACE = 2.0f*(float)CellSize;
float CRAZY_DISTANCE = 99999.0f;
bool UNIFORM_DISTANCE = true;
float MAX_DIST = 10 * (float)CellSize;
// parameters for sorting seeds
Vector3i center_idx = new Vector3i(ni / 2, 0, nk / 2); // middle
//Vector3i center_idx = new Vector3i(0, 0, 0); // corner
bool reverse_per_layer = true;
DenseGrid3f costGrid = new DenseGrid3f(supportGrid);
foreach (Vector3i ijk in costGrid.Indices())
{
Vector3d cell_center = new Vector3f(ijk.x * dx, ijk.y * dx, ijk.z * dx) + origin;
float f = (float)distanceField.Value(ref cell_center);
if (f <= MODEL_SPACE)
{
f = CRAZY_DISTANCE;
}
else if (UNIFORM_DISTANCE)
{
f = 1.0f;
}
else if (f > MAX_DIST)
{
f = MAX_DIST;
}
costGrid[ijk] = f;
}
// Find seeds on each layer, sort, and add to accumulated bottom-up seeds list.
// This sorting has an *enormous* effect on the support generation.
List <Vector3i> seeds = new List <Vector3i>();
List <Vector3i> layer_seeds = new List <Vector3i>();
for (int j = 0; j < nj; ++j)
{
layer_seeds.Clear();
for (int k = 0; k < nk; ++k)
{
for (int i = 0; i < ni; ++i)
{
if (supportGrid[i, j, k] == SUPPORT_TIP_BASE)
{
layer_seeds.Add(new Vector3i(i, j, k));
}
}
}
layer_seeds.Sort((a, b) => {
Vector3i pa = a; pa.y = 0;
Vector3i pb = b; pb.y = 0;
int sa = (pa - center_idx).LengthSquared, sb = (pb - center_idx).LengthSquared;
return(sa.CompareTo(sb));
});
// reversing sort order is intresting?
if (reverse_per_layer)
{
layer_seeds.Reverse();
}
seeds.AddRange(layer_seeds);
}
HashSet <Vector3i> seed_indices = new HashSet <Vector3i>(seeds);
// gives very different results...
if (ProcessBottomUp == false)
{
seeds.Reverse();
}
// for linear index a, is this a node we allow in graph? (ie graph bounds)
Func <int, bool> node_filter_f = (a) => {
Vector3i ai = costGrid.to_index(a);
// why not y check??
return(ai.x > 0 && ai.z > 0 && ai.x != ni - 1 && ai.y != nj - 1 && ai.z != nk - 1);
};
// distance from linear index a to linear index b
// this defines the cost field we want to find shortest path through
Func <int, int, float> node_dist_f = (a, b) => {
Vector3i ai = costGrid.to_index(a), bi = costGrid.to_index(b);
if (bi.y >= ai.y) // b.y should always be a.y-1
{
return(float.MaxValue);
}
float sg = supportGrid[bi];
// don't connect to tips
//if (sg == SUPPORT_TIP_BASE || sg == SUPPORT_TIP_TOP)
// return float.MaxValue;
if (sg == SUPPORT_TIP_TOP)
{
return(float.MaxValue);
}
if (sg < 0)
{
return(-999999); // if b is already used, we will terminate there, so this is a good choice
}
// otherwise cost is sqr-grid-distance + costGrid value (which is basically distance to surface)
float c = costGrid[b];
float f = (float)(Math.Sqrt((bi - ai).LengthSquared) * CellSize);
//float f = 0;
return(c + f);
};
// which linear-index nbrs to consider for linear index a
Func <int, IEnumerable <int> > neighbour_f = (a) => {
Vector3i ai = costGrid.to_index(a);
return(down_neighbours(ai, costGrid));
};
// when do we terminate
Func <int, bool> terminate_f = (a) => {
Vector3i ai = costGrid.to_index(a);
// terminate if we hit existing support path
if (seed_indices.Contains(ai) == false && supportGrid[ai] < 0)
{
return(true);
}
// terminate if we hit ground plane
if (ai.y == 0)
{
return(true);
}
return(false);
};
DijkstraGraphDistance dijkstra = new DijkstraGraphDistance(ni * nj * nk, false,
node_filter_f, node_dist_f, neighbour_f);
dijkstra.TrackOrder = true;
List <int> path = new List <int>();
Graph = new DGraph3();
Dictionary <Vector3i, int> CellToGraph = new Dictionary <Vector3i, int>();
TipVertices = new HashSet <int>();
TipBaseVertices = new HashSet <int>();
GroundVertices = new HashSet <int>();
// seeds are tip-base points
for (int k = 0; k < seeds.Count; ++k)
{
// add seed point (which is a tip-base vertex) as seed for dijkstra prop
int seed = costGrid.to_linear(seeds[k]);
dijkstra.Reset();
dijkstra.AddSeed(seed, 0);
// compute to termination (ground, existing node, etc)
int base_node = dijkstra.ComputeToNode(terminate_f);
if (base_node < 0)
{
base_node = dijkstra.GetOrder().Last();
}
// extract the path
path.Clear();
dijkstra.GetPathToSeed(base_node, path);
int N = path.Count;
// first point on path is termination point.
// create vertex for it if we have not yet
Vector3i basept_idx = supportGrid.to_index(path[0]);
int basept_vid;
if (CellToGraph.TryGetValue(basept_idx, out basept_vid) == false)
{
Vector3d curv = get_cell_center(basept_idx);
if (basept_idx.y == 0)
{
curv.y = 0;
}
basept_vid = Graph.AppendVertex(curv);
if (basept_idx.y == 0)
{
GroundVertices.Add(basept_vid);
}
CellToGraph[basept_idx] = basept_vid;
}
int cur_vid = basept_vid;
// now walk up path and create vertices as necessary
for (int i = 0; i < N; ++i)
{
int idx = path[i];
if (supportGrid[idx] >= 0)
{
supportGrid[idx] = SUPPORT_GRID_USED;
}
if (i > 0)
{
Vector3i next_idx = supportGrid.to_index(path[i]);
int next_vid;
if (CellToGraph.TryGetValue(next_idx, out next_vid) == false)
{
Vector3d nextv = get_cell_center(next_idx);
next_vid = Graph.AppendVertex(nextv);
CellToGraph[next_idx] = next_vid;
}
Graph.AppendEdge(cur_vid, next_vid);
cur_vid = next_vid;
}
}
// seed was tip-base so we should always get back there. Then we
// explicitly add tip-top and edge to it.
if (supportGrid[path[N - 1]] == SUPPORT_TIP_BASE)
{
Vector3i vec_idx = supportGrid.to_index(path[N - 1]);
TipBaseVertices.Add(CellToGraph[vec_idx]);
Vector3i tip_idx = vec_idx + Vector3i.AxisY;
int tip_vid;
if (CellToGraph.TryGetValue(tip_idx, out tip_vid) == false)
{
Vector3d tipv = get_cell_center(tip_idx);
tip_vid = Graph.AppendVertex(tipv);
CellToGraph[tip_idx] = tip_vid;
Graph.AppendEdge(cur_vid, tip_vid);
TipVertices.Add(tip_vid);
}
}
}
/*
* Snap tips to surface
*/
gParallel.ForEach(TipVertices, (tip_vid) => {
bool snapped = false;
Vector3d v = Graph.GetVertex(tip_vid);
Frame3f hitF;
// try shooting ray straight up. if that hits, and point is close, we use it
if (MeshQueries.RayHitPointFrame(Mesh, MeshSpatial, new Ray3d(v, Vector3d.AxisY), out hitF))
{
if (v.Distance(hitF.Origin) < 2 * CellSize)
{
v = hitF.Origin;
snapped = true;
}
}
// if that failed, try straight down
if (!snapped)
{
if (MeshQueries.RayHitPointFrame(Mesh, MeshSpatial, new Ray3d(v, -Vector3d.AxisY), out hitF))
{
if (v.Distance(hitF.Origin) < CellSize)
{
v = hitF.Origin;
snapped = true;
}
}
}
// if it missed, or hit pt was too far, find nearest point and try that
if (!snapped)
{
hitF = MeshQueries.NearestPointFrame(Mesh, MeshSpatial, v);
if (v.Distance(hitF.Origin) < 2 * CellSize)
{
v = hitF.Origin;
snapped = true;
}
// can this ever fail? tips should always be within 2 cells...
}
if (snapped)
{
Graph.SetVertex(tip_vid, v);
}
});
}