/// <summary>
/// Method that is used to encapsulate a series of actions into a single transaction for the user
/// to undo or redo.
/// </summary>
public void Connect()
{
//Establish a reference to the change manager
_changeManager = _inventorApplication.ChangeManager;
//Establish a reference to the Change Definitions collection for this add-in
_changeDefinitions = _changeManager.Add(_clientID);
_changeDefinition = _changeDefinitions.Add(_changeDefInternalName, _changeDefCommandName);
//Create a change processor
_changeProcessor = _changeDefinition.CreateChangeProcessor();
//Connect the events
this._onExecute_Delegate = new ChangeProcessorSink_OnExecuteEventHandler(changeProcessor_OnExecute);
_changeProcessor.OnExecute += this._onExecute_Delegate;
this._onTerminate_Delegate = new ChangeProcessorSink_OnTerminateEventHandler(changeProcessor_OnTerminate);
_changeProcessor.OnTerminate += this._onTerminate_Delegate;
//Calling the Execute method is what causes the transaction to occur.
_changeProcessor.Execute(_inventorApplication.ActiveEditDocument);
}
/// <summary>
/// Method that is used to encapsulate a series of actions into a single transaction for the user
/// to undo or redo.
/// </summary>
public void Connect()
{
//Establish a reference to the change manager
_changeManager = _inventorApplication.ChangeManager;
//Establish a reference to the Change Definitions collection for this add-in
_changeDefinitions = _changeManager.Add(_clientID);
_changeDefinition = _changeDefinitions.Add(_changeDefInternalName, _changeDefCommandName);
//Create a change processor
_changeProcessor = _changeDefinition.CreateChangeProcessor();
//Connect the events
this._onExecute_Delegate = new ChangeProcessorSink_OnExecuteEventHandler(changeProcessor_OnExecute);
_changeProcessor.OnExecute += this._onExecute_Delegate;
this._onTerminate_Delegate = new ChangeProcessorSink_OnTerminateEventHandler(changeProcessor_OnTerminate);
_changeProcessor.OnTerminate += this._onTerminate_Delegate;
//Calling the Execute method is what causes the transaction to occur.
_changeProcessor.Execute(_inventorApplication.ActiveEditDocument);
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
#region Initialize AddIn members and event delegate
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
//Initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate = new UserInterfaceEventsSink_OnEnvironmentChangeEventHandler(UserInterfaceEvents_OnEnvironmentChange);
m_userInterfaceEvents.OnEnvironmentChange += UserInterfaceEventsSink_OnEnvironmentChangeEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEventsSink_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
#endregion
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
String strAddInGUID = "{" + ((GuidAttribute)System.Attribute.GetCustomAttribute(typeof(StandardAddInServer), typeof(GuidAttribute))).Value + "}";
m_strAddInGUID = strAddInGUID;
#region 创建按钮. create the buttons
//get all the names of the current assembly
this.IconPictureInitial();
//-----------------------------------------------------------------------------------
//create the instance of the "BlockGenerator" command and button
m_blockFormCmd = new BlockFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.BlockStandard.ico",
"ValveBlockDesign.resources.BlockLarge.ico",
m_blockFormCmd,
"块",
"AppBlockGenerateCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"Generate a block",
"Generate a block with parameters entered by user",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Align" command and button
m_alignCmd = new AlignCmd();
this.CreateButton(
"ValveBlockDesign.resources.AlignStandard.ico",
"ValveBlockDesign.resources.AlignLarge.ico",
m_alignCmd,
"对齐",
"AppAlignCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"Cavity align",
"Cavity align",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "ExtractiFeature" command and button
m_extractiFeatureCmd = new ExtractiFeatureCmd();
this.CreateButton(
"ValveBlockDesign.resources.ExtractiFeatureStandard.ico",
"ValveBlockDesign.resources.ExtractiFeatureLarge.ico",
m_extractiFeatureCmd,
"提取模型",
"AppExtractiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"提取特征",
"提取特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "InsertiFeature" command and button
m_iFeatureFormCmd = new iFeatureFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.InsertiFeatureStandard.ico",
"ValveBlockDesign.resources.InsertiFeatureLarge.ico",
m_iFeatureFormCmd,
"元件特征",
"AppInsertiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入特征",
"插入特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "DeleteiFeature" command and button
m_deleteCmd = new DeleteCmd();
this.CreateButton(
"ValveBlockDesign.resources.DeleteCmdStandard.ico",
"ValveBlockDesign.resources.DeleteCmdLarge.ico",
m_deleteCmd,
"删除",
"AppDeleteiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"删除特征",
"删除特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "RotateiFeature" command and button
m_rotateCmd = new RotateCmd();
this.CreateButton(
"ValveBlockDesign.resources.RotateCmdStandard.ico",
"ValveBlockDesign.resources.RotateCmdLarge.ico",
m_rotateCmd,
"旋转",
"AppRotateiFeatureCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"旋转特征",
"旋转特征",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "InsertOutline" command and button
m_insertOutlineCmd = new InsertOutlineCmd();
this.CreateButton(
"ValveBlockDesign.resources.InsertiFeatureStandard.ico",
"ValveBlockDesign.resources.OutLineCmdLarge.ico",
m_insertOutlineCmd,
"安装外形",
"AppInsertOutlineCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入安装外形",
"插入安装外形",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Move" command and button
m_moveCmd = new MoveCmd();
this.CreateButton(
"ValveBlockDesign.resources.MoveCmdStandard.ico",
"ValveBlockDesign.resources.MoveCmdLarge.ico",
m_moveCmd,
"移动",
"AppMoveCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"移动孔",
"移动孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Connect" command and button
m_connectCmd = new ConnectCmd();
this.CreateButton(
"ValveBlockDesign.resources.ConnectStandard.ico",
"ValveBlockDesign.resources.ConnectLarge.ico",
m_connectCmd,
"连接",
"AppConnectCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"连接孔",
"连接孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Edit" command and button
m_cavityLibraryEditCmd = new CavityLibraryEditCmd();
this.CreateButton(
"ValveBlockDesign.resources.EditCavityCmdStandard.ico",
"ValveBlockDesign.resources.EditCavityCmdLarge.ico",
m_cavityLibraryEditCmd,
"修改元件",
"AppEditLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"修改元件参数",
"修改元件参数",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
//create the instance of the "Add" command and button
m_cavityLibraryAddCmd = new CavityLibraryAddCmd();
this.CreateButton(
"ValveBlockDesign.resources.AddCavityCmdStandard.ico",
"ValveBlockDesign.resources.AddCavityCmdLarge.ico",
m_cavityLibraryAddCmd,
"添加元件",
"AppAddLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"添加新元件",
"添加新元件",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
m_cavityLibraryScanCmd = new CavityLibraryScanCmd();
this.CreateButton(
"ValveBlockDesign.resources.ScanCavityCmdStandard.ico",
"ValveBlockDesign.resources.ScanCavityCmdLarge.ico",
m_cavityLibraryScanCmd,
"浏览元件",
"AppScanLibraryCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"浏览库中元件",
"浏览库中元件",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//-----------------------------------------------------------------------------------
m_boltHolesFormCmd = new BoltHolesFormCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.BoltHolesCmdLarge.ico",
m_boltHolesFormCmd,
"安装螺纹孔",
"AppInsertBoltHolesCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入安装螺纹孔",
"插入安装螺纹孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
m_insertXportCmd = new InsertXportCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.Xport.ico",
m_insertXportCmd,
"工艺孔",
"AppInsertXportCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"插入工艺孔",
"插入工艺孔",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
m_editNetCmd = new EditNetCmd();
this.CreateButton(
"ValveBlockDesign.resources.BoltHolesCmdStandard.ico",
"ValveBlockDesign.resources.EditColor.ico",
m_editNetCmd,
"修改网络",
"AppEditNetCmd",
CommandTypesEnum.kShapeEditCmdType,
strAddInGUID,
"修改油孔网络",
"修改油孔网络",
ButtonDisplayEnum.kDisplayTextInLearningMode,
false);
//---------------------------------------------------------------------------------
#endregion
#region 设置ChangeManager和CommandCategory. Set the ChangeManager and CommandCategory
//Create change definitions
//get the change manager
ChangeManager oChangeManager = m_inventorApplication.ChangeManager;
//Create the change definition collections
ChangeDefinitions oChangeDefs = oChangeManager.Add(strAddInGUID);
//-----------------------------------------------------------------------------------
//Create the "Block" change definition
ChangeDefinition oBlockChangeDef = oChangeDefs.Add("AppBlockGenerateChgDef", "块");
//Create the command category
CommandCategory oBlockCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("块", "AppBlockGenerateCmdCat", strAddInGUID);
oBlockCmdCategory.Add(m_blockFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oAlignChangeDef = oChangeDefs.Add("AppAlignChgDef", "对齐");
CommandCategory oAlignCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("对齐", "AppAlignCmdCat", strAddInGUID);
oAlignCmdCategory.Add(m_alignCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oExtractiFeatureChangeDef = oChangeDefs.Add("AppExtractiFeatureChgDef", "提取特征");
CommandCategory oExtractiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("提取特征", "AppExtractiFeatureCmdCat", strAddInGUID);
oExtractiFeatureCmdCategory.Add(m_extractiFeatureCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertiFeatureChangeDef = oChangeDefs.Add("AppInsertiFeatureChgDef", "插入特征");
CommandCategory oInsertiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入特征", "AppInsertiFeatureCmdCat", strAddInGUID);
oInsertiFeatureCmdCategory.Add(m_iFeatureFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oDeleteiFeatureChangeDef = oChangeDefs.Add("AppDeleteiFeatureChgDef", "删除特征");
CommandCategory oDeleteiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("删除特征", "AppDeleteiFeatureCmdCat", strAddInGUID);
oDeleteiFeatureCmdCategory.Add(m_deleteCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oRotateiFeatureChangeDef = oChangeDefs.Add("AppRotateiFeatureChgDef", "旋转特征");
CommandCategory oRotateiFeatureCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("旋转特征", "AppRotateiFeatureCmdCat", strAddInGUID);
oRotateiFeatureCmdCategory.Add(m_rotateCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oMoveChangeDef = oChangeDefs.Add("AppMoveChgDef", "移动孔");
CommandCategory oMoveCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("移动孔", "AppMoveCmdCat", strAddInGUID);
oMoveCmdCategory.Add(m_moveCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertOutlineChangeDef = oChangeDefs.Add("AppInsertOutlineChgDef", "插入安装外形");
CommandCategory oInsertOutlineCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装外形", "AppInsertOutlineCmdCat", strAddInGUID);
oInsertOutlineCmdCategory.Add(m_insertOutlineCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertXportChangeDef = oChangeDefs.Add("AppInsertXportChgDef", "插入工艺孔");
CommandCategory oInsertXportCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入工艺孔", "AppInsertXportCmdCat", strAddInGUID);
oInsertXportCmdCategory.Add(m_insertXportCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oEditNetChangeDef = oChangeDefs.Add("AppEditNetChgDef", "修改油孔网络");
CommandCategory oEitNetCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改油孔网络", "AppEditNetCmdCat", strAddInGUID);
oEitNetCmdCategory.Add(m_editNetCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oConnectDef = oChangeDefs.Add("AppConnectChgDef", "连接");
CommandCategory oConnectCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("连接", "AppConnectCmdCat", strAddInGUID);
oConnectCmdCategory.Add(m_connectCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oEditLibraryDef = oChangeDefs.Add("AppEditLibraryChgDef", "修改参数");
CommandCategory oEditLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("修改参数", "AppEditLibraryCmdCat", strAddInGUID);
oEditLibraryCategory.Add(m_cavityLibraryEditCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oAddLibraryDef = oChangeDefs.Add("AppAddLibraryChgDef", "添加特征元件");
CommandCategory oAddLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("添加特征元件", "AppAddLibraryCmdCat", strAddInGUID);
oAddLibraryCategory.Add(m_cavityLibraryAddCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oScanLibraryDef = oChangeDefs.Add("AppScanLibraryChgDef", "浏览特征元件");
CommandCategory oScanLibraryCategory = m_inventorApplication.CommandManager.CommandCategories.Add("浏览特征元件", "AppScanLibraryCmdCat", strAddInGUID);
oScanLibraryCategory.Add(m_cavityLibraryScanCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
ChangeDefinition oInsertBoltHolesDef = oChangeDefs.Add("AppInsertBoltHolesChgDef", "插入安装螺纹孔");
CommandCategory oInsertBoltHolesCategory = m_inventorApplication.CommandManager.CommandCategories.Add("插入安装螺纹孔", "AppInsertBoltHolesCmdCat", strAddInGUID);
oInsertBoltHolesCategory.Add(m_boltHolesFormCmd.ButtonDefinition);
//-----------------------------------------------------------------------------------
#endregion
#region 加载Ribbon面板. Load the Ribbon Panel.
if (firstTime)
{
Ribbon partDocRibbon;
partDocRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];
RibbonTab myRibbonTab;
myRibbonTab = partDocRibbon.RibbonTabs.Add(
"阀块设计",
"id_TabBlockDesign",
strAddInGUID,
"",
false);
RibbonPanels ribbonPanels;
ribbonPanels = myRibbonTab.RibbonPanels;
RibbonPanel cubePanel;
cubePanel = ribbonPanels.Add(
"块",
"id_Panel_Block",
strAddInGUID,
"",
false);
CommandControls blockPanelCtrls;
blockPanelCtrls = cubePanel.CommandControls;
CommandControl cubePanelCtrl;
cubePanelCtrl = blockPanelCtrls.AddButton(
m_blockFormCmd.ButtonDefinition,
true,
true,
"",
false);
//------------------------------------------------------------------
//----------------------------------------------
//对iFeature特征操作
RibbonPanel iFeaturePanel;
iFeaturePanel = ribbonPanels.Add(
"插入",
"id_Panel_iFeature",
strAddInGUID,
"",
false);
CommandControls iFeatureCtrls;
iFeatureCtrls = iFeaturePanel.CommandControls;
CommandControl InsertiFeatureCtrl;//插入元件
InsertiFeatureCtrl = iFeatureCtrls.AddButton(
m_iFeatureFormCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl InsertOutlineCtrl;//插入安装外形
InsertOutlineCtrl = iFeatureCtrls.AddButton(
m_insertOutlineCmd.ButtonDefinition,
true,
true,
"",
true);
CommandControl InsertBoltHolesCtrl;//安装螺纹孔
InsertBoltHolesCtrl = iFeatureCtrls.AddButton(
m_boltHolesFormCmd.ButtonDefinition,
true,
true,
"",
false);
//-------------------------------------------------------------------------------
//RibbonPanel connectPanel;
//connectPanel = ribbonPanels.Add(
// "连接",
// "id_Panel_Connect",
// strAddInGUID,
// "",
// false);
//CommandControls connectCtrls;
//connectCtrls = connectPanel.CommandControls;
RibbonPanel modifyPanel;
modifyPanel = ribbonPanels.Add(
"修改",
"id_Panel_Edit",
strAddInGUID,
"",
false);
CommandControls modifyCtrls;
modifyCtrls = modifyPanel.CommandControls;
CommandControl AlignCtrl;
AlignCtrl = modifyCtrls.AddButton(
m_alignCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl MoveCtrl;
MoveCtrl = modifyCtrls.AddButton(
m_moveCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl DeleteCtrl;//删除元件特征
DeleteCtrl = modifyCtrls.AddButton(
m_deleteCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl EditPortCtrl;//修改网络
EditPortCtrl = modifyCtrls.AddButton(
m_editNetCmd.ButtonDefinition,
true,
true,
"",
true);
CommandControl RotateCtrl;//旋转元件特征
RotateCtrl = modifyCtrls.AddButton(
m_rotateCmd.ButtonDefinition,
true,
true,
"",
false);
//--------------------------------------------------------
RibbonPanel ConnectPanel;
ConnectPanel = ribbonPanels.Add(
"连通油路",
"id_Panel_Connection",
strAddInGUID,
"",
false);
CommandControls ConnectCtrls;
ConnectCtrls = ConnectPanel.CommandControls;
CommandControl ConnectCtrl;
ConnectCtrl = ConnectCtrls.AddButton(
m_connectCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl InsertXportCtrl;//插入工艺孔
InsertXportCtrl = ConnectCtrls.AddButton(
m_insertXportCmd.ButtonDefinition,
true,
true,
"",
true);
//------------------------------------------------------------
//元件库的操作面板
RibbonPanel CavityLibraryPanel;
CavityLibraryPanel = ribbonPanels.Add(
"元件库",
"id_Panel_CavityLibrary",
strAddInGUID,
"",
false);
CommandControls CavityLibraryCtrls;
CavityLibraryCtrls = CavityLibraryPanel.CommandControls;
CommandControl EditCavityCtrl;
EditCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryEditCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl AddCavityCtrl;
AddCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryAddCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl ScanCavityCtrl;
ScanCavityCtrl = CavityLibraryCtrls.AddButton(
m_cavityLibraryScanCmd.ButtonDefinition,
true,
true,
"",
false);
CommandControl ExtractiFeatureCtrl;
ExtractiFeatureCtrl = CavityLibraryCtrls.AddButton(
m_extractiFeatureCmd.ButtonDefinition,
true,
true,
"",
false);
}
#endregion
}
catch (Exception ex)
{
System.Windows.Forms.MessageBox.Show(ex.ToString());
}
}