private void PEGenerateDlg_FormClosing(object sender, FormClosingEventArgs e)
{
if (this.DialogResult != DialogResult.OK)
{
CaxPart.CloseAllParts();
}
}
private void OK_Click(object sender, EventArgs e)
{
//先關閉所有檔案
CaxPart.CloseAllParts();
try
{
if (Is_OldPart == true)
{
//定義總組立檔案、二階檔案、三階檔案名稱
string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_MOT.prt");
string SecondFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + ".prt");
string ThirdFileFullPath_OIS = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OIS" + "[Oper1]" + ".prt");
string ThirdFileFullPath_CAM = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), comboBoxOldPartNo.Text + "_OP" + "[Oper1]" + "_CAM.prt");
string OPFolderPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", comboBoxOldCusName.Text, comboBoxOldPartNo.Text, comboBoxOldCusRev.Text.ToUpper(), "OP" + "[Oper1]");
string tempSecondFileFullPath = SecondFileFullPath;
string tempThirdFileFullPath_OIS = ThirdFileFullPath_OIS;
string tempThirdFileFullPath_CAM = ThirdFileFullPath_CAM;
string tempOPFolderPath = OPFolderPath;
#region 開啟總組立
if (File.Exists(AsmCompFileFullPath))
{
//組件存在，直接開啟任務組立
BasePart newAsmPart;
status = CaxPart.OpenBaseDisplay(AsmCompFileFullPath, out newAsmPart);
if (!status)
{
CaxLog.ShowListingWindow("組立開啟失敗，料號不可有中文字！");
return;
}
}
else
{
CaxLog.ShowListingWindow("開啟失敗：找不到總組立" + Path.GetFileNameWithoutExtension(AsmCompFileFullPath));
return;
}
#endregion
#region 建立新插入的製程
NXOpen.Assemblies.Component tempComp;
foreach (string i in ListAddOper)
{
//設定一階為WorkComp
CaxAsm.SetWorkComponent(null);
//建立二階檔案
SecondFileFullPath = tempSecondFileFullPath;
SecondFileFullPath = SecondFileFullPath.Replace("[Oper1]", i);
status = CaxAsm.CreateNewEmptyComp(SecondFileFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
//取得二階所有comp
List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>();
CaxAsm.GetCompChildren(out ChildenComp);
foreach (NXOpen.Assemblies.Component ii in ChildenComp)
{
if (ii.Name == Path.GetFileNameWithoutExtension(SecondFileFullPath).ToUpper())
{
CaxAsm.SetWorkComponent(ii);
}
}
//建立三階檔案
ThirdFileFullPath_OIS = tempThirdFileFullPath_OIS;
ThirdFileFullPath_CAM = tempThirdFileFullPath_CAM;
ThirdFileFullPath_OIS = ThirdFileFullPath_OIS.Replace("[Oper1]", i);
ThirdFileFullPath_CAM = ThirdFileFullPath_CAM.Replace("[Oper1]", i);
status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_OIS, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階OIS檔失敗");
return;
}
status = CaxAsm.CreateNewEmptyComp(ThirdFileFullPath_CAM, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階CAM檔失敗");
return;
}
}
#endregion
#region 建立新插入的製程資料夾
foreach (string i in ListAddOper)
{
OPFolderPath = tempOPFolderPath;
OPFolderPath = OPFolderPath.Replace("[Oper1]", i);
string OISFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "OIS");
string CAMFolderPath = string.Format(@"{0}\{1}", OPFolderPath, "CAM");
if (!File.Exists(OISFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(OISFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
if (!File.Exists(CAMFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(CAMFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
}
#endregion
#region 將值儲存起來
cPECreateData.CusName = comboBoxOldCusName.Text;
cPECreateData.PartNo = comboBoxOldPartNo.Text;
cPECreateData.CusRev = comboBoxOldCusRev.Text.ToUpper();
cPECreateData.ListOperation = new List <Operation>();
Operation cOperation = new Operation();
cPECreateData.Oper1Ary = new List <string>();
cPECreateData.Oper2Ary = new List <string>();
for (int i = 0; i < panel.Rows.Count; i++)
{
if (panel.Rows.Count == 0)
{
MessageBox.Show("尚未選擇製程序與製程別！");
return;
}
if (panel.GetCell(i, 1).Value.ToString() == "")
{
MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別！");
return;
}
cOperation = new Operation();
cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString();
cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString();
cPECreateData.ListOperation.Add(cOperation);
cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString());
cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString());
}
#endregion
#region 寫出PECreateData.dat
string PECreateDataJsonDat = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekTaskDir(), CurrentOldCusName, CurrentOldPartNo, CurrentOldCusRev, "MODEL", "PECreateData.dat");
status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData);
if (!status)
{
MessageBox.Show("PECreateData.dat 輸出失敗...");
return;
}
#endregion
}
else
{
#region 取得客戶名稱
CusName = comboBoxCusName.Text;
if (CusName == "")
{
MessageBox.Show("尚未填寫客戶！");
return;
}
#endregion
#region 取得料號
PartNo = textPartNo.Text;
if (PartNo == "")
{
MessageBox.Show("尚未填寫料號！");
return;
}
#endregion
#region 取得客戶版次
CusRev = textCusRev.Text;
if (CusRev == "")
{
MessageBox.Show("尚未填寫客戶版次！");
return;
}
#endregion
#region 取得檔案路徑
if (PartPath == "-1")
{
MessageBox.Show("尚未選擇客戶檔案！");
return;
}
#endregion
#region 定義根目錄
//定義MODEL資料夾路徑
string ModelFolderFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), "MODEL");
//定義總組立檔案名稱
string AsmCompFileFullPath = string.Format(@"{0}\{1}\{2}\{3}\{4}\{5}", CaxEnv.GetGlobaltekEnvDir(), "Task", CusName, PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt");
//定義CAM資料夾路徑、OIS資料夾路徑、三階檔案路徑
string CAMFolderPath = "", OISFolderPath = "", ThridOperPartPath = "";
#endregion
#region 建立MODEL資料夾
if (!File.Exists(ModelFolderFullPath))
{
try
{
System.IO.Directory.CreateDirectory(ModelFolderFullPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
#endregion
#region 複製客戶檔案到MODEL資料夾內
//判斷客戶的檔案是否存在
status = System.IO.File.Exists(PartPath);
if (!status)
{
MessageBox.Show("指定的檔案不存在，請再次確認");
return;
}
//建立MODEL資料夾內客戶檔案路徑
string CustomerPartFullPath = string.Format(@"{0}\{1}", ModelFolderFullPath, PartNo + ".prt");
//開始複製
if (!System.IO.File.Exists(CustomerPartFullPath))
{
File.Copy(PartPath, CustomerPartFullPath, true);
}
#endregion
#region 將值儲存起來
cPECreateData.CusName = CusName;
cPECreateData.PartNo = PartNo;
cPECreateData.CusRev = CusRev.ToUpper();
//cPE_OutPutDat.PartPath = PartPath;
cPECreateData.ListOperation = new List <Operation>();
Operation cOperation = new Operation();
cPECreateData.Oper1Ary = new List <string>();
cPECreateData.Oper2Ary = new List <string>();
for (int i = 0; i < panel.Rows.Count; i++)
{
if (panel.Rows.Count == 0)
{
MessageBox.Show("尚未選擇製程序與製程別！");
return;
}
if (panel.GetCell(i, 1).Value.ToString() == "")
{
MessageBox.Show("製程序" + panel.GetCell(i, 0).Value + "尚未選取製程別！");
return;
}
cOperation = new Operation();
cOperation.Oper1 = panel.GetCell(i, 0).Value.ToString();
cOperation.Oper2 = panel.GetCell(i, 1).Value.ToString();
//建立CAM資料夾路徑
CAMFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "CAM");
//儲存CAM資料夾路徑
//cOperation.CAMFolderPath = CAMFolderPath;
//建立CAM資料夾
if (!File.Exists(CAMFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(CAMFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
//建立OIS資料夾路徑
OISFolderPath = string.Format(@"{0}\{1}\{2}", Path.GetDirectoryName(AsmCompFileFullPath), "OP" + panel.GetCell(i, 0).Value.ToString(), "OIS");
//儲存OIS資料夾路徑
//cOperation.OISFolderPath = OISFolderPath;
//建立OIS資料夾
if (!File.Exists(OISFolderPath))
{
try
{
System.IO.Directory.CreateDirectory(OISFolderPath);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.ToString());
return;
}
}
//建立三階檔案路徑
ThridOperPartPath = Path.GetDirectoryName(AsmCompFileFullPath);
cPECreateData.ListOperation.Add(cOperation);
cPECreateData.Oper1Ary.Add(panel.GetCell(i, 0).Value.ToString());
cPECreateData.Oper2Ary.Add(panel.GetCell(i, 1).Value.ToString());
}
#endregion
#region (註解中)複製MODEL內的客戶檔案到料號資料夾內，並更名XXX_MOT.prt
/*
* //判斷要複製的檔案是否存在
* status = System.IO.File.Exists(destFileName_Model);
* if (!status)
* {
* MessageBox.Show("指定的檔案不存在，請再次確認");
* return;
* }
*
* //建立目的地(客戶版次)檔案全路徑
* string destFileName_CusRev = string.Format(@"{0}\{1}\{2}\{3}", CaxEnv.GetGlobalTekEnvDir(), PartNo, CusRev.ToUpper(), PartNo + "_MOT.prt");
*
* //開始複製
* File.Copy(destFileName_Model, destFileName_CusRev, true);
*/
#endregion
#region 自動建立總組立檔案架構，並組立相關製程
status = CaxAsm.CreateNewAsm(AsmCompFileFullPath);
if (!status)
{
CaxLog.ShowListingWindow("建立一階總組立檔失敗");
return;
}
CaxPart.Save();
string OPCompName = "";
NXOpen.Assemblies.Component tempComp;
//List<double> ListOperDouble = new List<double>();
//for (int i = 0; i < cPE_OutPutDat.ListOperation.Count; i++)
//{
// ListOperDouble.Add(Convert.ToDouble(cPE_OutPutDat.ListOperation[i].Oper1));
//}
//ListOperDouble.Sort();
for (int i = 0; i < cPECreateData.ListOperation.Count; i++)
{
//設定一階為WorkComp
CaxAsm.SetWorkComponent(null);
//建立二階製程檔
OPCompName = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + cPECreateData.ListOperation[i].Oper1 + ".prt");
status = CaxAsm.CreateNewEmptyComp(OPCompName, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立二階製程檔失敗");
return;
}
}
string OISCompFullPath = "", CAMCompFullPath = "";
//取得二階所有comp
List <NXOpen.Assemblies.Component> ChildenComp = new List <NXOpen.Assemblies.Component>();
CaxAsm.GetCompChildren(out ChildenComp);
for (int i = 0; i < ChildenComp.Count; i++)
{
CaxAsm.SetWorkComponent(ChildenComp[i]);
string OperStr = ChildenComp[i].Name.Split(new string[] { "OP" }, StringSplitOptions.RemoveEmptyEntries)[1];
#region 建立三階CAM檔
//建立三階CAM檔
CAMCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OP" + OperStr + "_CAM.prt");
status = CaxAsm.CreateNewEmptyComp(CAMCompFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("建立三階CAM檔失敗");
return;
}
#endregion
#region 建立三階OIS檔
//先複製drafting_template.prt到OIS檔
string drafting_template_Path = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekEnvDir(), "drafting_template.prt");
OISCompFullPath = string.Format(@"{0}\{1}", Path.GetDirectoryName(AsmCompFileFullPath), PartNo + "_OIS" + OperStr + ".prt");
if (!File.Exists(drafting_template_Path))
{
CaxLog.ShowListingWindow("drafting_template.prt遺失，請聯繫開發工程師");
return;
}
System.IO.File.Copy(drafting_template_Path, OISCompFullPath, true);
//組立三階OIS檔
//status = CaxAsm.CreateNewEmptyComp(OISCompFullPath, out tempComp);
status = CaxAsm.AddComponentToAsmByDefault(OISCompFullPath, out tempComp);
if (!status)
{
CaxLog.ShowListingWindow("組立三階OIS檔失敗");
return;
}
#endregion
}
#endregion
#region 寫出PECreateData.dat
string PECreateDataJsonDat = string.Format(@"{0}\{1}", ModelFolderFullPath, "PECreateData.dat");
status = CaxFile.WriteJsonFileData(PECreateDataJsonDat, cPECreateData);
if (!status)
{
MessageBox.Show("PECreateData.dat 輸出失敗...");
return;
}
#endregion
#region (註解中)寫出METEDownloadData.dat
//string METEDownloadData = string.Format(@"{0}\{1}", CaxEnv.GetGlobaltekTaskDir(), "METEDownloadData.dat");
//METEDownloadData cMETEDownloadData = new METEDownloadData();
//if (File.Exists(METEDownloadData))
//{
// #region METEDownloadData.dat檔案存在
// status = CaxPublic.ReadMETEDownloadData(METEDownloadData, out cMETEDownloadData);
// if (!status)
// {
// MessageBox.Show("METEDownloadData.dat讀取失敗...");
// return;
// }
// int CusCount = 0, IndexOfCusName = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++)
// {
// if (CusName != cMETEDownloadData.EntirePartAry[i].CusName)
// {
// CusCount++;
// }
// else
// {
// IndexOfCusName = i;
// break;
// }
// }
// //新的客戶且已經有METEDownloadDat.dat
// if (CusCount == cMETEDownloadData.EntirePartAry.Count)
// {
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.CusPart = new List<CusPart>();
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cEntirePartAry.CusPart.Add(cCusPart);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// }
// //舊的客戶新增料號
// else
// {
// //判斷料號是否已存在
// int PartCount = 0; int IndexOfPartNo = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count; i++)
// {
// if (PartNo != cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[i].PartNo)
// {
// PartCount++;
// }
// else
// {
// IndexOfPartNo = i;
// break;
// }
// }
// //舊的客戶且新的料號 PartCount == CusPart.Count 表示新的料號
// if (PartCount == cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Count)
// {
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart.Add(cCusPart);
// }
// //舊的客戶且舊的料號新增客戶版次
// else
// {
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cMETEDownloadData.EntirePartAry[IndexOfCusName].CusPart[IndexOfPartNo].CusRev.Add(cCusRev);
// }
// }
// /*
// int PartCount = 0; int IndexOfPartNo = -1;
// for (int i = 0; i < cMETEDownloadData.EntirePartAry.Count; i++)
// {
// if (PartNo != cMETEDownloadData.EntirePartAry[i].PartNo)
// {
// PartCount++;
// }
// else
// {
// IndexOfPartNo = i;
// break;
// }
// }
// //新的料號且已經有METEDownloadDat.dat
// if (PartCount == cMETEDownloadData.EntirePartAry.Count)
// {
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary;
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.PartNo = PartNo;
// cEntirePartAry.CusRev.Add(cCusRev);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// }
// //舊的料號新增客戶版次
// else
// {
// CusRev cCusRev = new CusRev();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = cPE_OutPutDat.Oper1Ary;
// cMETEDownloadData.EntirePartAry[IndexOfPartNo].CusRev.Add(cCusRev);
// }
// */
// #endregion
//}
//else
//{
// #region METEDownloadData.dat檔案不存在
// cMETEDownloadData.EntirePartAry = new List<EntirePartAry>();
// EntirePartAry cEntirePartAry = new EntirePartAry();
// cEntirePartAry.CusName = CusName;
// cEntirePartAry.CusPart = new List<CusPart>();
// CusPart cCusPart = new CusPart();
// cCusPart.PartNo = PartNo;
// cCusPart.CusRev = new List<CusRev>();
// CusRev cCusRev = new CusRev();
// cCusRev.RevNo = CusRev.ToUpper();
// cCusRev.OperAry1 = new List<string>();
// cCusRev.OperAry2 = new List<string>();
// cCusRev.OperAry1 = cPECreateData.Oper1Ary;
// cCusRev.OperAry2 = cPECreateData.Oper2Ary;
// cCusPart.CusRev.Add(cCusRev);
// cEntirePartAry.CusPart.Add(cCusPart);
// cMETEDownloadData.EntirePartAry.Add(cEntirePartAry);
// #endregion
//}
//status = CaxFile.WriteJsonFileData(METEDownloadData, cMETEDownloadData);
//if (!status)
//{
// MessageBox.Show("METEDownloadData.dat輸出失敗...");
// return;
//}
#endregion
}
CaxAsm.SetWorkComponent(null);
CaxPart.Save();
this.DialogResult = DialogResult.OK;
this.Close();
}
catch (System.Exception ex)
{
CaxLog.ShowListingWindow(ex.ToString());
}
}