/// <summary>
///A test for Remove
///</summary>
public void RemoveTestHelper <TValue>()
{
var target = new CaseInsensitiveDictionary <TValue>();
var key = "a";
TValue value = default(TValue);
target.Add(key, value);
target.Remove(key);
Assert.IsFalse(((Dictionary <string, TValue>)target).ContainsKey(key));
}
public void replaceName(int idx, string newName)
{
if (IsName(idx))
{
nameLookupTable.Remove(names[idx]);
names[idx] = newName;
nameLookupTable[newName] = idx;
updateTools(PackageChange.NameEdit, idx);
}
}
/// <summary>
///A test for Remove
///</summary>
public void RemoveTest3Helper <TValue>()
{
var target = new CaseInsensitiveDictionary <TValue>();
var key = "a";
var zkey = "z";
TValue value = default(TValue);
target.Add(key, value);
try
{
target.Remove(zkey);
} catch {}
Assert.IsTrue(((Dictionary <string, TValue>)target).ContainsKey(key));
}
private void AddToSensitiveList(
BlockCommandContext context,
string word)
{
// Update the internal dictionaries by removing it from the
// insensitive list and adding it to the sensitive list.
CaseInsensitiveDictionary.Remove(word.ToLowerInvariant());
CaseSensitiveDictionary.Add(word);
// Clear the spell-checking on the entire document and reparse it.
Project.Plugins.ClearAnalysis(BlockAnalyzer);
Project.Plugins.ProcessBlockAnalysis();
// Make sure the settings are written out.
WriteSettings();
}
private void buildInstallationQueue(ModJob job, CaseInsensitiveDictionary <InstallSourceFile> installationMapping, bool isSFAR)
{
CLog.Information(@"Building installation queue for " + job.Header, Settings.LogModInstallation);
foreach (var entry in job.FilesToInstall)
{
//Key is destination, value is source file
var destFile = entry.Key;
var sourceFile = entry.Value;
bool altApplied = false;
foreach (var altFile in job.AlternateFiles.Where(x => x.IsSelected))
{
Debug.WriteLine(@"Checking alt conditions for application: " + altFile.FriendlyName);
if (altFile.Operation == AlternateFile.AltFileOperation.OP_NOTHING)
{
continue; //skip nothing
}
if (altFile.Operation == AlternateFile.AltFileOperation.OP_APPLY_MULTILISTFILES)
{
continue; //do not apply in the main loop.
}
if (altFile.Operation == AlternateFile.AltFileOperation.OP_NOINSTALL_MULTILISTFILES)
{
continue; //do not apply in the main loop.
}
if (altFile.ModFile.Equals(destFile, StringComparison.InvariantCultureIgnoreCase))
{
//Alt applies to this file
switch (altFile.Operation)
{
case AlternateFile.AltFileOperation.OP_NOINSTALL:
CLog.Information($@"Not installing {destFile} for Alternate File {altFile.FriendlyName} due to operation OP_NOINSTALL", Settings.LogModInstallation);
//we simply don't map as we just do a continue below.
altApplied = true;
break;
case AlternateFile.AltFileOperation.OP_SUBSTITUTE:
CLog.Information($@"Repointing {destFile} to {altFile.AltFile} for Alternate File {altFile.FriendlyName} due to operation OP_SUBSTITUTE", Settings.LogModInstallation);
if (job.JobDirectory != null && (altFile.AltFile.StartsWith(job.JobDirectory) && job.Header == ModJob.JobHeader.CUSTOMDLC))
{
installationMapping[destFile] = new InstallSourceFile(altFile.AltFile.Substring(job.JobDirectory.Length).TrimStart('/', '\\'))
{
AltApplied = true,
IsFullRelativeFilePath = true
}; //use alternate file as key instead
}
else
{
installationMapping[destFile] = new InstallSourceFile(altFile.AltFile)
{
AltApplied = true,
IsFullRelativeFilePath = true
}; //use alternate file as key instead
}
altApplied = true;
break;
case AlternateFile.AltFileOperation.OP_INSTALL:
//same logic as substitute, just different logging.
CLog.Information($@"Adding {sourceFile} to install (from {altFile.AltFile}) as part of Alternate File {altFile.FriendlyName} due to operation OP_INSTALL", Settings.LogModInstallation);
if (job.JobDirectory != null && (altFile.AltFile.StartsWith(job.JobDirectory) && job.Header == ModJob.JobHeader.CUSTOMDLC))
{
installationMapping[destFile] = new InstallSourceFile(altFile.AltFile.Substring(job.JobDirectory.Length).TrimStart('/', '\\'))
{
AltApplied = true,
IsFullRelativeFilePath = true
}; //use alternate file as key instead
}
else
{
installationMapping[destFile] = new InstallSourceFile(altFile.AltFile)
{
AltApplied = true,
IsFullRelativeFilePath = true
}; //use alternate file as key instead
}
altApplied = true;
break;
}
break;
}
}
if (altApplied)
{
continue; //no further processing for file
}
//installationMapping[sourceFile] = sourceFile; //Nothing different, just add to installation list
installationMapping[destFile] = new InstallSourceFile(sourceFile);
CLog.Information($@"Adding {job.Header} file to installation {(isSFAR ? @"SFAR" : @"unpacked")} queue: {entry.Value} -> {destFile}", Settings.LogModInstallation); //do not localize
}
//Apply autolist alternate files
foreach (var altFile in job.AlternateFiles.Where(x => x.IsSelected && x.Operation == AlternateFile.AltFileOperation.OP_APPLY_MULTILISTFILES))
{
foreach (var multifile in altFile.MultiListSourceFiles)
{
CLog.Information(
$@"Adding multilist file {multifile} to install (from {altFile.MultiListRootPath}) as part of Alternate File {altFile.FriendlyName} due to operation OP_APPLY_MULTILISTFILES",
Settings.LogModInstallation);
string relativeSourcePath = altFile.MultiListRootPath + '\\' + multifile;
var targetPath = altFile.MultiListTargetPath + '\\' + multifile;
installationMapping[targetPath] = new InstallSourceFile(relativeSourcePath)
{
AltApplied = true,
IsFullRelativeFilePath = true
}; //use alternate file as key instead
//}
//not sure if there should be an else case here.
//else
//{
// installationMapping[destFile] = new InstallSourceFile(multifile)
// {
// AltApplied = true,
// IsFullRelativeFilePath = true
// }; //use alternate file as key instead
//}
}
}
// Remove multilist noinstall files
foreach (var altFile in job.AlternateFiles.Where(x => x.IsSelected && x.Operation == AlternateFile.AltFileOperation.OP_NOINSTALL_MULTILISTFILES))
{
foreach (var multifile in altFile.MultiListSourceFiles)
{
CLog.Information(
$@"Attempting to remove multilist file {multifile} from install (from {altFile.MultiListRootPath}) as part of Alternate File {altFile.FriendlyName} due to operation OP_NOINSTALL_MULTILISTFILES",
Settings.LogModInstallation);
string relativeSourcePath = altFile.MultiListRootPath + '\\' + multifile;
var targetPath = altFile.MultiListTargetPath + '\\' + multifile;
if (installationMapping.Remove(targetPath))
{
CLog.Information($@" > Removed multilist file {targetPath} from installation",
Settings.LogModInstallation);
}
else
{
Log.Warning($@"Failed to remove multilist file from installation queue as specified by altfile: {targetPath}, path not present in installation files");
}
}
}
}