public bool ValidateCUSelection(CUAction cuAction, bool p_SignificantAncillary, bool p_SignificantAncillaryFound)
{
m_SignificantAncillary = p_SignificantAncillary;
m_SignificantRecordFound = p_SignificantAncillaryFound;
return(ValidateFeature(cuAction));
}
private bool ValidateFeature(CUAction cuAction)
{
bool bReturnValue = true;
try
{
if (!IsCorrectionJob() && IsEditedByDifferentWR(false))
{
MessageBox.Show("This CU is being edited by another WR.", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (!IsCorrectionJob() && (GetFeatureState().Equals("PPI") || GetFeatureState().Equals("ABI")) && IsEditedByDifferentWR(true))
{
MessageBox.Show("Proposed install features must be transitioned to INI before they can be modified; contact Support for assistance.", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (!IsCorrectionJob() && (!GetFeatureState().Equals("PPI") && !GetFeatureState().Equals("ABI") && !GetFeatureState().Equals("INI") && !GetFeatureState().Equals("CLS") && !GetFeatureState().Equals("PPX") && !GetFeatureState().Equals("ABX")))
{
MessageBox.Show("Cannot edit the CU code for a feature in this state", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (!IsCorrectionJob() && cuAction == CUAction.Changeout && !m_isAggregateFeature)
{
MessageBox.Show("Changeouts are only valid on aggregate features", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (IsCorrectionJob())
{
MessageBox.Show("CUs may only be modified in a WR job", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
if (string.IsNullOrEmpty(m_category) && m_cuType.Equals("PRIMARY"))
{
MessageBox.Show("Primary CU selection must be configured to be filtered by category; notify system administrator.", "CU Selection", MessageBoxButtons.OK, MessageBoxIcon.Warning);
return(false);
}
}
catch (Exception ex)
{
throw ex;
}
return(bReturnValue);
}
public CUAction GetCUAction(string p_existingCU)
{
CUAction bReturn = CUAction.Changeout;
try
{
if (string.IsNullOrEmpty(p_existingCU))
{
bReturn = CUAction.Selection;
}
else if (m_oKeyObject.CID <= 0 || (m_oKeyObject.Components[m_ComponentName].Recordset.RecordCount == 0))
{
bReturn = CUAction.Selection;
}
else if (Convert.ToString(m_oKeyObject.Components[m_ComponentName].Recordset.Fields["ACTIVITY_C"].Value).Equals("I") || Convert.ToString(m_oKeyObject.Components[m_ComponentName].Recordset.Fields["ACTIVITY_C"].Value).Equals("IC"))
{
if ((Convert.ToString(m_oKeyObject.Components[m_ComponentName].Recordset.Fields["WR_ID"].Value).Equals(m_odataContext.ActiveJob) == true) || (Convert.ToString(m_oKeyObject.Components[m_ComponentName].Recordset.Fields["WR_ID"].Value).Equals("0") == true) || (m_oKeyObject.Components[m_ComponentName].Recordset.Fields["WR_ID"].Value.IsDBNull() == true)) //Need to change this field
{
bReturn = CUAction.Selection;
}
else
{
bReturn = CUAction.NoActionWRMismatches;
}
}
else if (m_isAggregateFeature && m_ComponentName != "COMP_UNIT_ANCIL_N")
{
bReturn = CUAction.Changeout;
}
else
{
bReturn = CUAction.NoAction;
}
m_CuAction = bReturn;
}
catch (Exception ex)
{
throw ex;
}
return(bReturn);
}
public bool Execute(object InputValue)
{
Int16 nCompNO = 0;
string sFilterFieldName = "";
string sCUKeyfield = "";
string sCUKeyValue = "";
Boolean flagCUModified = false;
Boolean flagPrimaryCU = true;
string sExistingCU = string.Empty;
string sExistingActivity = string.Empty;
string sUnitCNO = string.Empty;
string sUnitCID = string.Empty;
string sCNoFieldName = string.Empty;
bool bSignificantRecordFound = false;
// Implement this method.
// This method will call CUService to set the CU values
try
{
m_oCUService = new CUService(m_iANO, m_bSignificantAncillary);
m_oCUService.DataContext = m_oDataContext;
m_oCUService.KeyObject = m_oFeature;
if (m_sCUTypeConfigured == "PRIMARY")
{
flagPrimaryCU = true;
m_sCUType = "CU";
m_sCUano = Convert.ToString(m_oCUService.CompUnitANO);
m_CUCno = (short)m_oCUService.CUComponentCNO;
if (!m_bSignificantAncillary)
{
m_componentName = "COMP_UNIT_N";
}
}
if (m_sCUTypeConfigured == "ANCILLARY")
{
flagPrimaryCU = false;
m_sCUType = "ACU";
m_sCUano = Convert.ToString(m_oCUService.AncCompUnitANO);
m_CUCno = (short)m_oCUService.AncillaryCUComponentCNO;
m_componentName = "COMP_UNIT_ANCIL_N";
}
sCNoFieldName = m_oCUService.CUField;
sCUKeyfield = "CU_TYPE";
sCUKeyValue = m_sCUType;
if (m_bReadOnly)
{
if (m_oFeature.CID <= 0)
{
MessageBox.Show("Nothing to review at this time.", "GTechnology", MessageBoxButtons.OK);
}
else
{
//Show More Info Form here
CuCommonForms CuComomonForm = new CuCommonForms(m_oApp);
CuComomonForm.ShowMoreInfoForm(Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields[sCNoFieldName].Value), true, true);
}
return(ProcessCUUpdate(flagCUModified, ref nCompNO, ref sFilterFieldName));;
}
ValidationConditions oValidateCUConditions = new ValidationConditions(m_oFeature, m_oDataContext, m_sCategoryFilter, m_sCUTypeConfigured, m_sIsAggregateFeature, m_componentName);
CUAction CuActionSelected = CUAction.Selection;
if (m_bSignificantAncillary)
{
bSignificantRecordFound = MoveSignificantAncillaryRecordset();
}
CuActionSelected = oValidateCUConditions.GetCUAction(m_oFeature.Components.GetComponent(m_CUCno).Recordset.RecordCount > 0 ? Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields[sCNoFieldName].Value) : ""); //Identify the CU Action based on the conditions
if (m_oFeature.Components.GetComponent(m_CUCno).Recordset.RecordCount > 0)
{
sExistingCU = Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields[sCNoFieldName].Value);
}
RemovalActivity removalActivitySelectedOnChageOutForm = RemovalActivity.NoValue;
InstallActivity installActivitySelectedOnChageOutForm = InstallActivity.Novalue;
if (CuActionSelected.Equals(CUAction.NoActionWRMismatches))
{
m_oApp.SetStatusBarText(GTStatusPanelConstants.gtaspcMessage, "Cannot alter a CU installed by a different WR");
// MessageBox.Show("Cannot alter a CU installed by a different WR", "GTechnology", MessageBoxButtons.OK);
return(true);
}
else if (CuActionSelected.Equals(CUAction.NoAction))
{
m_oApp.SetStatusBarText(GTStatusPanelConstants.gtaspcMessage, "Cannot edit this CU code.");
//MessageBox.Show("Cannot edit this CU code.", "GTechnology", MessageBoxButtons.OK);
return(true);
}
if (!oValidateCUConditions.ValidateCUSelection(CuActionSelected, m_bSignificantAncillary, bSignificantRecordFound))
{
return(true); //Validation conditions do not match and therefore return from here
}
if (CuActionSelected.Equals(CUAction.Changeout)) //This is a changeout operation
{
//ALM-1592-- Added a method to disable the "Replace with same CU" option if the CU is not found
bool bReplacewithSameCU = ReplacewithSameCU(sExistingCU, m_sCategoryFilter);
CuCommonForms CuComomonForm = new CuCommonForms(m_oApp, bReplacewithSameCU);
CuComomonForm.ShowChangeOutForm();
removalActivitySelectedOnChageOutForm = CuComomonForm.RemovalActivitySelected;
installActivitySelectedOnChageOutForm = CuComomonForm.InstallActivitySelected;
if (CuComomonForm.CancelClicked)
{
return(true); //Cancel is clicked on Changeout Form so No Action required
}
if (installActivitySelectedOnChageOutForm == InstallActivity.DoNotInstall)
{
//Handle the setting of Removal Activity and return as there is no new installation needed
m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["ACTIVITY_C"].Value = (removalActivitySelectedOnChageOutForm == RemovalActivity.Remove ? "R" : "S");
m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["WR_EDITED"].Value = m_oApp.DataContext.ActiveJob;
return(ProcessCUUpdate(flagCUModified, ref nCompNO, ref sFilterFieldName));
}
if (installActivitySelectedOnChageOutForm == InstallActivity.Replace || installActivitySelectedOnChageOutForm == InstallActivity.Select)
{
sExistingCU = Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields[sCNoFieldName].Value);
sUnitCID = Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["UNIT_CID"].Value);
sUnitCNO = Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["UNIT_CNO"].Value);
m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["WR_EDITED"].Value = m_oApp.DataContext.ActiveJob;
sExistingActivity = Convert.ToString(m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["ACTIVITY_C"].Value);
m_oFeature.Components.GetComponent(m_CUCno).Recordset.Fields["ACTIVITY_C"].Value = (removalActivitySelectedOnChageOutForm == RemovalActivity.Remove ? "R" : "S");
}
}
if (m_oFeature.CID <= 0) //This is a clear case of Selection, Proceed as usual
{
if (DialogResult.OK == m_oCUService.Selection(flagPrimaryCU, sCUKeyfield, sCUKeyValue, m_sCategoryFilter))
{
flagCUModified = true;
}
}
else
{
if (DialogResult.OK == m_oCUService.Selection(flagPrimaryCU, m_oFeature.CID, sCUKeyfield, sCUKeyValue, m_sCategoryFilter, removalActivitySelectedOnChageOutForm, installActivitySelectedOnChageOutForm, sExistingCU, sExistingActivity, sUnitCID, sUnitCNO))
{
flagCUModified = true;
}
}
return(ProcessCUUpdate(flagCUModified, ref nCompNO, ref sFilterFieldName));
}
catch (Exception ex)
{
MessageBox.Show("Error occured in CU Selection Foreign Query " + ex.Message, "G/Technology");
return(false);
}
}
