public Beam CutBeamByPart(Beam beam, Part part, bool startSideCut = true)
{
// вырезаем ThasBeam по MainBeam
var partClass = part.Class;
BooleanPart Beam = new BooleanPart();
Beam.Father = beam;
part.Class = BooleanPart.BooleanOperativeClassName;
Beam.SetOperativePart(part);
Beam.Insert();
part.Class = partClass;
part.Modify();
// создаем режущую плоскость, чтобы отбросить
//..(левую) часть ThisBeam по плоскости MainBeam
CutPlane BeamLineCut = new CutPlane();
BeamLineCut.Father = beam;
Plane BeamCutPlane = new Plane();
var cs = part.GetCoordinateSystem();
if (startSideCut)
{
cs.AxisX *= -1;
}
BeamCutPlane.AxisX = cs.AxisX;
BeamCutPlane.AxisY = cs.AxisY;
BeamCutPlane.Origin = cs.Origin;
BeamLineCut.Plane = BeamCutPlane;
BeamLineCut.Insert();
Model.CommitChanges();
return(beam);
}
public static bool SolidToSolidIntersect(Part part1, Part part2)
{
double originalVolume = 0.0;
part1.GetReportProperty("VOLUME_NET", ref originalVolume);
var cuttingPart = new BooleanPart
{
Father = part1
};
part2.Class = BooleanPart.BooleanOperativeClassName;
cuttingPart.SetOperativePart(part2);
cuttingPart.Insert();
double volumeAfterCut = 0.0;
part1.GetReportProperty("VOLUME_NET", ref volumeAfterCut);
cuttingPart.Delete();
if (originalVolume > volumeAfterCut)
{
Tracer._trace("volume change");
return(true);
}
return(false);
}
public ContourPlate CreateCut(
Point point1,
Point point2,
Point point3,
Point point4,
Part Part_To_Be_Cut)
{
ContourPlate contourPlate = new ContourPlate();
contourPlate.Profile.ProfileString = "PL500";
contourPlate.Material.MaterialString = "ANTIMATERIAL";
contourPlate.Finish = "";
contourPlate.Class = "BlOpCl";
contourPlate.Position.Depth = Position.DepthEnum.MIDDLE;
contourPlate.AddContourPoint(new ContourPoint(point1, (Chamfer)null));
contourPlate.AddContourPoint(new ContourPoint(point2, (Chamfer)null));
contourPlate.AddContourPoint(new ContourPoint(point3, (Chamfer)null));
contourPlate.AddContourPoint(new ContourPoint(point4, (Chamfer)null));
contourPlate.Insert();
BooleanPart booleanPart = new BooleanPart();
booleanPart.Father = (ModelObject)Part_To_Be_Cut;
booleanPart.OperativePart = (Part)contourPlate;
booleanPart.Insert();
return(contourPlate);
}
/*
* public static ContourPlate CreateCuttingPart(string profileString, string mate)
* {
* var plate = new ContourPlate();
*
* //var myProfileString = "PL" + (thickness).ToString("F2");
*
* string sysProfileString = null;
*
* ProfileConversion.ConvertFromCurrentUnits(profileString, ref sysProfileString);
* plate.Profile.ProfileString = sysProfileString;
* plate.Material.MaterialString = "ANTIMATERIAL";
* plate.Class = BooleanPart.BooleanOperativeClassName;
* plate.Name = "CUTPART";
* plate.PartNumber.Prefix = "0";
* plate.PartNumber.StartNumber = 0;
* plate.AssemblyNumber.Prefix = " ";
* plate.AssemblyNumber.StartNumber = 0;
*
* plate.Position.Depth = Position.DepthEnum.BEHIND;
* plate.Position.Plane = Position.PlaneEnum.MIDDLE;
* plate.Position.PlaneOffset = 0;
* plate.Position.Rotation = Position.RotationEnum.FRONT;
* plate.Position.RotationOffset = 0.0;
*
* return plate;
* }
*/
private void TryApplyCuts(Part part, List <Tuple <AABB, Part> > cutSolids)
{
if (null == cutSolids)
{
return;
}
var partBox = part.GetAABB();
// check collision
foreach (var cutObjects in cutSolids)
{
var aabb = cutObjects.Item1;
var operativePart = cutObjects.Item2;
if (!GeometryUtils.testAABBAABB(aabb, partBox))
{
continue;
}
BooleanPart Beam = new BooleanPart();
Beam.Father = part;
Beam.SetOperativePart(operativePart);
if (!Beam.Insert())
{
Tracer._trace("Insert failed!");
}
//Tracer._trace($"Cut solid: {part.Name}.");
}
}
public void part_cut(Part part_to_becut, Part cut_part)
{
BooleanPart booleanPart = new BooleanPart();
booleanPart.Father = (ModelObject)part_to_becut;
cut_part.Class = "BlOpCl";
booleanPart.OperativePart = cut_part;
booleanPart.Insert();
}
private void TryApplyCuts(Part part, List <Part> cutContours)
{
foreach (var cutObject in cutContours)
{
cutObject.Insert();
if (SolidToSolidIntersect(part, cutObject))
{
var plate = new BooleanPart {
Father = part
};
plate.SetOperativePart(cutObject);
if (!plate.Insert())
{
Tracer._trace("Insert failed!");
}
Tracer._trace($"Cut contour: {part.Profile.ProfileString}.");
}
cutObject.Delete();
}
}
internal static ModelObject GetBooleanPart()
{
var beam = GetBeam();
var cuttingPart = new Beam()
{
StartPoint = new Point(5500, 6000, 0),
EndPoint = new Point(5500, 8000, 0),
Class = BooleanPart.BooleanOperativeClassName,
};
cuttingPart.Profile.ProfileString = "100*100";
cuttingPart.Insert();
var cut = new BooleanPart();
cut.Father = beam;
cut.SetOperativePart(cuttingPart);
cut.Insert();
cuttingPart.Delete();
return(cut);
}
/// <summary>
/// Adds the cut for the wallshoe components
/// </summary>
/// <param name="variables">List of doubles with dimensions of the component</param>
/// <param name="p1">The point which gives the x position of the component on fatherpart</param>
/// <param name="minY">Fatherparts solids miminum Y position</param>
/// <param name="maxY">Fatherparts solids miminum Y position</param>
/// <param name="changeDirection">Boolean to give the direction</param>
/// <param name="fatherpart">Part to insert the cut to</param>
private bool AddWallShoeCut(double[] variables, Point p1, double minY, double maxY, bool changeDirection, Part fatherpart)
{
try {
ContourPlate cutpart = new ContourPlate();
BooleanPart bPart = new BooleanPart();
cutpart.Name = "Leikkaus";
cutpart.Position.Depth = Position.DepthEnum.MIDDLE;
cutpart.Position.Plane = Position.PlaneEnum.MIDDLE;
cutpart.Class = BooleanPart.BooleanOperativeClassName;
cutpart.Material.MaterialString = "Reikä";
cutpart.Profile.ProfileString = "PL135";
cutpart.Profile.ProfileString = "PL" + variables[4];
if (!changeDirection)
{
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - variables[0], p1.Z + variables[1]), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - variables[0], p1.Z + variables[1] + variables[2]), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + variables[1] + variables[2] + (Math.Tan(variables[3] * Math.PI / 180) * ((maxY - minY) / 2 + variables[0]))), null));
}
else
{
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y + variables[0], p1.Z + variables[1]), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y + variables[0], p1.Z + variables[1] + variables[2]), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + variables[1] + variables[2] + (Math.Tan(variables[3] * Math.PI / 180) * ((minY - maxY) / 2 + variables[0]))), null));
}
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + variables[1]), null));
cutpart.Insert();
bPart.Father = fatherpart;
bPart.SetOperativePart(cutpart);
if (!bPart.Insert())
{
WriteLog("Leikkauksen (1) tekeminen epäonnistui!");
}
cutpart.Delete();
} catch (Exception ex) {
WriteLog(ex.Message + "\n" + ex.StackTrace);
return(false);
}
return(true);
}
public static ContourPlate InsertCutPlate(ContourPlate cuttedPlate, ArrayList points,
string profileString, string materialString, Chamfer chamfer = null)
{
var cp = new ContourPlate();
foreach (Point point in points)
{
cp.AddContourPoint(point, chamfer);
}
cp.Profile.ProfileString = profileString;
cp.Material.MaterialString = materialString;
cp.Class = BooleanPart.BooleanOperativeClassName;
cp.Insert();
var bp = new BooleanPart {
Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT, Father = cuttedPlate
};
bp.SetOperativePart(cp);
bp.Insert();
cp.Delete();
return(cp);
}
public Beam CreateCut(Point point1, Part Part_To_Be_Cut, string Partprofile)
{
Beam beam = new Beam();
beam.Profile.ProfileString = Partprofile;
beam.Material.MaterialString = "ANTIMATERIAL";
beam.Finish = "";
beam.Class = "BlOpCl";
beam.Position.Depth = Position.DepthEnum.MIDDLE;
beam.Position.Rotation = Position.RotationEnum.TOP;
beam.Position.Plane = Position.PlaneEnum.MIDDLE;
double num = 0.0;
Part_To_Be_Cut.GetReportProperty("END_Z", ref num);
beam.StartPoint = new Point(point1.X, point1.Y, num + 500.0);
beam.EndPoint = new Point(point1.X, point1.Y, num - 500.0);
beam.Insert();
BooleanPart booleanPart = new BooleanPart();
booleanPart.Father = (ModelObject)Part_To_Be_Cut;
booleanPart.OperativePart = (Part)beam;
booleanPart.Insert();
return(beam);
}
public override bool Run(List <InputDefinition> Input)
{
try
{
GetValuesFromDialog();
WorkPlaneHandler wph = Model.GetWorkPlaneHandler();
TransformationPlane tp = wph.GetCurrentTransformationPlane();
TransformationPlane tppart = null;
BoltGroup bg = Model.SelectModelObject((Identifier)Input[0].GetInput()) as BoltGroup;
bg.Select();
List <Part> parts = new List <Part>();
parts.Add(bg.PartToBeBolted);
parts.Add(bg.PartToBoltTo);
foreach (Part p in bg.OtherPartsToBolt)
{
parts.Add(p);
}
#region Clear
List <Part> _part = new List <Part>();
foreach (Part p in parts)
{
bool flag = false;
foreach (Part pp in _part)
{
if (pp.Identifier.ID == p.Identifier.ID)
{
flag = true;
}
}
if (!flag)
{
_part.Add(p);
}
}
parts.Clear();
parts = _part;
#endregion
foreach (Part p in parts)
{
if (p is Beam)
{
Beam b = p as Beam;
b.Select();
double k = 0.0; b.GetReportProperty("PROFILE.FLANGE_SLOPE_RATIO", ref k);
if (k == 0)
{
continue;
}
tppart = new TransformationPlane(p.GetCoordinateSystem());
wph.SetCurrentTransformationPlane(tppart);
bg.Select();
foreach (Point pb in bg.BoltPositions)
{
Point _pb = new Point(pb);
#region Уклон полок - точки через солид
GeometricPlane gp = new GeometricPlane(
_pb,
new Vector(0, 1, 0),
new Vector(0, 0, 1));
List <List <Point> > lp = IntersectSolid(p.GetSolid(), gp);
List <LineSegment> ls = new List <LineSegment>();
for (int i = 0; i < lp[0].Count - 1; i++)
{
Point p1 = lp[0][i];
Point p2 = lp[0][i + 1];
Vector v = new Vector(p2.X - p1.X, p2.Y - p1.Y, p2.Z - p1.Z);
v.Normalize(1.0);
if (v.Y != 0 && v.Z != 0)
{
ControlLine cl = new ControlLine();
cl.Line.Point1 = p1;
cl.Line.Point2 = p2;
// cl.Insert();
ls.Add(new LineSegment(p1, p2));
}
}
Point _p1 = lp[0][0];
Point _p2 = lp[0][lp[0].Count - 1];
Vector _v = new Vector(_p2.X - _p1.X, _p2.Y - _p1.Y, _p2.Z - _p1.Z);
if (_v.Y != 0 && _v.Z != 0)
{
ls.Add(new LineSegment(_p1, _p2));
ControlLine cl = new ControlLine();
cl.Line.Point1 = _p1;
cl.Line.Point2 = _p2;
// cl.Insert();
}
#endregion
#region Точки для построения пластины
double diam = bg.BoltSize;
double tol = GOST_10906_78[diam][0];
double _b = GOST_10906_78[diam][1];
double t1 = GOST_10906_78[diam][2];
double t2 = GOST_10906_78[diam][3];
int kf = (_pb.Z <= ((Point)b.GetReferenceLine(false)[0]).Z ? -1 : 1);
_pb.Z += kf * _b * 0.5;
double h = double.MaxValue;
LineSegment lsb = ls[0];
foreach (LineSegment lsi in ls)
{
double t = Distance.PointToLineSegment(_pb, lsi);
if (h >= t)
{
h = t;
lsb = lsi;
}
}
//ControlLine cli = new ControlLine();
//cli.Line.Point1 = lsb.Point1;
//cli.Line.Point2 = lsb.Point2;
//cli.Insert();
Point pb1 = new Point(_pb.X, _pb.Y + 1000, _pb.Z);
Point pbi = Intersection.LineToLine(
new Line(lsb),
new Line(_pb, pb1)).Point1;
//cli.Line.Point1 = _pb;
//cli.Line.Point2 = pbi;
//cli.Insert();
#endregion
ContourPlate cp = new ContourPlate();
Contour cr = new Contour();
cr.AddContourPoint(new ContourPoint(new Point(pbi.X - _b * 0.5, pbi.Y, pbi.Z), null));
cr.AddContourPoint(new ContourPoint(new Point(pbi.X + _b * 0.5, pbi.Y, pbi.Z), null));
cr.AddContourPoint(new ContourPoint(new Point(pbi.X + _b * 0.5, pbi.Y, pbi.Z - kf * _b), null));
cr.AddContourPoint(new ContourPoint(new Point(pbi.X - _b * 0.5, pbi.Y, pbi.Z - kf * _b), null));
cp.Contour = cr;
cp.Profile.ProfileString = "PL" + t1.ToString();
cp.AssemblyNumber.Prefix = prefix_asm;
cp.AssemblyNumber.StartNumber = start_part;
cp.PartNumber.Prefix = prefix_part;
cp.PartNumber.StartNumber = start_part;
cp.Name = name;
cp.Material.MaterialString = material;
cp.Finish = finish;
if (kf == -1 && pbi.Y > 0)
{
cp.Position.Depth = Position.DepthEnum.FRONT;
}
else if (kf == -1 && pbi.Y < 0)
{
cp.Position.Depth = Position.DepthEnum.BEHIND;
}
else if (kf == 1 && pbi.Y > 0)
{
cp.Position.Depth = Position.DepthEnum.BEHIND;
}
else if (kf == 1 && pbi.Y < 0)
{
cp.Position.Depth = Position.DepthEnum.FRONT;
}
cp.Insert();
if (weight != 0.0 && us_prop_weight != "")
{
cp.SetUserProperty(us_prop_weight, weight);
cp.Modify();
}
BooleanPart bp = new BooleanPart();
ContourPlate cp2 = new ContourPlate();
Contour cr2 = new Contour();
cr2.AddContourPoint(new ContourPoint(new Point(pbi.X, pbi.Y, pbi.Z), null));
cr2.AddContourPoint(new ContourPoint(new Point(pbi.X, pbi.Y, pbi.Z - kf * _b), null));
cr2.AddContourPoint(new ContourPoint(new Point(pbi.X, pbi.Y + (pbi.Y > 0 ? -1 * (t1 - t2) : (t1 - t2)), pbi.Z - kf * _b), null));
cp2.Contour = cr2;
cp2.Profile.ProfileString = "PL" + (_b + 10).ToString();
cp2.Class = BooleanPart.BooleanOperativeClassName;
cp2.Insert();
bp.Father = cp;
bp.OperativePart = cp2;
bp.Insert();
cp2.Delete();
BoltArray ba = new BoltArray();
ba.FirstPosition = pb;
ba.SecondPosition = new Point(pb.X + 100, pb.Y, pb.Z);
ba.BoltStandard = bg.BoltStandard;
ba.Position.Rotation = Position.RotationEnum.TOP;
ba.BoltType = bg.BoltType;
ba.BoltSize = bg.BoltSize;
ba.Tolerance = tol;
ba.Bolt = false;
ba.AddBoltDistX(0);
ba.AddBoltDistY(0);
ba.PartToBeBolted = cp;
ba.PartToBoltTo = cp;
ba.Insert();
}
}
}
wph.SetCurrentTransformationPlane(tp);
}
catch (Exception Exc)
{
MessageBox.Show(Exc.ToString());
}
return(true);
}
private void InsertComponents(ModelObject mObj, List <TSM.Component> components)
{
TransformationPlane originalTransformationplane = null;
try {
lock (wHandler) {
originalTransformationplane = wHandler.GetCurrentTransformationPlane();
}
ComponentInput compInput = new ComponentInput();
Part fatherpart = mObj as Part;
Assembly assembly = fatherpart.GetAssembly();
// Get the transformationplane from objects coordinate systems vectors and because objects coordinate system is not the same XY plane as of models,
// so cross product needs to be made for the Y-axis
TransformationPlane fatherpartsTransformationPlane = new TransformationPlane(fatherpart.GetCoordinateSystem().Origin, fatherpart.GetCoordinateSystem().AxisX, Vector.Cross(fatherpart.GetCoordinateSystem().AxisY, fatherpart.GetCoordinateSystem().AxisX));
lock (wHandler) {
wHandler.SetCurrentTransformationPlane(fatherpartsTransformationPlane);
}
double minX = fatherpart.GetSolid().MinimumPoint.X;
double minY = fatherpart.GetSolid().MinimumPoint.Y;
double minZ = fatherpart.GetSolid().MinimumPoint.Z;
double maxX = fatherpart.GetSolid().MaximumPoint.X;
double maxY = fatherpart.GetSolid().MaximumPoint.Y;
double maxZ = fatherpart.GetSolid().MaximumPoint.Z;
Solid s = fatherpart.GetSolid();
FaceEnumerator fEnum = s.GetFaceEnumerator();
StringBuilder sb = new StringBuilder();
while (fEnum.MoveNext())
{
sb.AppendLine(fEnum.Current.Normal.ToString());
}
Point p1 = null;
Point p2 = null;
List <Point> cutPartPoints = new List <Point>()
{
new Point(),
new Point(),
new Point(),
new Point()
};
ContourPlate cutpart = null;
for (int i = 0; i < components.Count; i++)
{
cutpart = new ContourPlate();
cutpart.Name = "Leikkaus";
cutpart.Position.Depth = Position.DepthEnum.MIDDLE;
cutpart.Position.Plane = Position.PlaneEnum.MIDDLE;
cutpart.Class = BooleanPart.BooleanOperativeClassName;
cutpart.Material.MaterialString = "Reikä";
cutpart.Profile.ProfileString = "PL135";
BooleanPart bPart = new BooleanPart();
compInput = new ComponentInput();
switch (i)
{
case 0:
p1 = new Point(minX + 300, 0, minZ);
p2 = new Point(minX + 300, maxY, minZ);
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - 52, p1.Z + 40), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - 52, p1.Z + 161.68), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + 161.68 + (Math.Tan(9.88 * Math.PI / 180) * ((maxY - minY) / 2 + 52))), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + 40), null));
cutpart.Insert();
bPart.Father = fatherpart;
bPart.SetOperativePart(cutpart);
if (!bPart.Insert())
{
SetInfoText("Leikkauksen (1) tekeminen epäonnistui!");
}
cutpart.Delete();
break;
case 1:
p1 = new Point(maxX - 300, 0, minZ);
p2 = new Point(maxX - 300, maxY, minZ);
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - 52, p1.Z + 40), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, p1.Y - 52, p1.Z + 161.68), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + 161.68 + (Math.Tan(9.88 * Math.PI / 180) * ((maxY - minY) / 2 + 52))), null));
cutpart.AddContourPoint(new ContourPoint(new Point(p1.X, maxY, p1.Z + 40), null));
cutpart.Insert();
bPart.Father = fatherpart;
bPart.SetOperativePart(cutpart);
if (!bPart.Insert())
{
SetInfoText("Leikkauksen (2) tekeminen epäonnistui!");
}
cutpart.Delete();
break;
case 2:
p1 = new Point(minX + 300, 0, maxZ + 135);
p2 = new Point(minX + 300, maxY, maxZ + 135);
break;
case 3:
p1 = new Point(maxX - 300, 0, maxZ + 135);
p2 = new Point(maxX - 300, maxY, maxZ + 135);
break;
}
compInput.AddOneInputPosition(p1);
compInput.AddOneInputPosition(p2);
components[i].SetComponentInput(compInput);
if (!components[i].Insert())
{
SetInfoText("Komponentin laittaminen epäonnistui!");
}
}
foreach (TSM.Component c in components)
{
assembly.Add(c);
assembly.Modify();
}
} catch (Exception ex) {
ExceptionOccured(ex.Message, ex.StackTrace);
SetInfoText("Komponentin asettamisessa tapahtui virhe!");
} finally {
lock (wHandler) {
wHandler.SetCurrentTransformationPlane(originalTransformationplane);
}
}
}
static void Main(string[] args)
{
var model = new Model();
if (model.GetConnectionStatus())
{
Console.WriteLine("You can start writting your Tekla project");
//insert fence handles
var beamHandle1 = new Beam()
{
StartPoint = new Point(0.0, 0.0, 3000.0),
EndPoint = new Point(36000.0, 0.0, 3000.0),
Profile = new Profile {
ProfileString = "RHS200*5"
}
};
beamHandle1.Insert();
var beamHandle2 = new Beam()
{
StartPoint = new Point(0.0, 0.0, 3000.0),
EndPoint = new Point(0.0, 30000.0, 3000.0),
Profile = new Profile {
ProfileString = "RHS200*5"
}
};
beamHandle2.Insert();
var beamHandle3 = new Beam()
{
StartPoint = new Point(36000.0, 0.0, 3000.0),
EndPoint = new Point(36000.0, 30000.0, 3000.0),
Profile = new Profile {
ProfileString = "RHS200*5"
}
};
beamHandle3.Insert();
var beamHandle4 = new Beam()
{
StartPoint = new Point(0.0, 30000.0, 3000.0),
EndPoint = new Point(36000.0, 30000.0, 3000.0),
Profile = new Profile {
ProfileString = "RHS200*5"
}
};
beamHandle4.Insert();
//insert fence columns
for (int index = 0; index <= 36000; index += 3000)
{
var point = new Point(index * 1.0, 0.0);
var column = AddColumn(point, 3000);
}
for (int index = 3000; index <= 30000; index += 3000)
{
var point = new Point(0.0, index * 1.0);
var column = AddColumn(point, 3000);
}
for (int index = 3000; index <= 36000; index += 3000)
{
var point = new Point(index * 1.0, 30000.0);
var column = AddColumn(point, 3000);
}
for (int index = 3000; index <= 27000; index += 3000)
{
var point = new Point(36000.0, index * 1.0);
var column = AddColumn(point, 3000);
}
Console.WriteLine("Give the weight of the house, number between 10 and 34:");
string val = Console.ReadLine();
int houseWeight = Convert.ToInt32(val);
Console.WriteLine("Give the height of the house, number between 3 and 10");
string val1 = Console.ReadLine();
int houseHeight = Convert.ToInt32(val1);
Console.WriteLine("Give the side weight of the house, number between 10 and 28");
string val2 = Console.ReadLine();
int houseSideWeight = Convert.ToInt32(val2);
//int houseSideWeight = 20;
//int houseWeight = 25;
//int houseHeight = 6;
var frontWall = AddPlate(new List <Point>
{
new Point(1000, 1000, 0),
new Point(houseWeight * 1000, 1000, 0),
new Point(houseWeight * 1000, 1000, houseHeight * 1000),
new Point(1000, 1000, houseHeight * 1000)
});
var leftWall = AddPlate(new List <Point>
{
new Point(1000, 1000, 0),
new Point(1000, houseSideWeight * 1000, 0),
new Point(1000, houseSideWeight * 1000, houseHeight * 1000),
new Point(1000, 1000, houseHeight * 1000)
});
var rightWall = AddPlate(new List <Point>
{
new Point(houseWeight * 1000, 1000, 0),
new Point(houseWeight * 1000, houseSideWeight * 1000, 0),
new Point(houseWeight * 1000, houseSideWeight * 1000, houseHeight * 1000),
new Point(houseWeight * 1000, 1000, houseHeight * 1000)
});
var backWall = AddPlate(new List <Point>
{
new Point(1000, houseSideWeight * 1000, 0),
new Point(houseWeight * 1000, houseSideWeight * 1000, 0),
new Point(houseWeight * 1000, houseSideWeight * 1000, houseHeight * 1000),
new Point(1000, houseSideWeight * 1000, houseHeight * 1000)
});
var Floor = AddPlate(new List <Point>
{
new Point(1000, 1000, 0),
new Point(houseWeight * 1000, 1000, 0),
new Point(houseWeight * 1000, houseSideWeight * 1000, 0),
new Point(1000, houseSideWeight * 1000, 0)
});
var Roof = AddPlate(new List <Point>
{
new Point(1000, 1000, houseHeight * 1000),
new Point(houseWeight * 1000, 1000, houseHeight * 1000),
new Point(houseWeight * 1000, houseSideWeight * 1000, houseHeight * 1000),
new Point(1000, houseSideWeight * 1000, houseHeight * 1000)
});
var leftSideRoof = AddPlate(new List <Point>
{
new Point(1000, 1000, houseHeight * 1000),
new Point((houseWeight / 2) * 1000, 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point((houseWeight / 2) * 1000, houseSideWeight * 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point(1000, houseSideWeight * 1000, houseHeight * 1000)
});
var RightSideRoof = AddPlate(new List <Point>
{
new Point(houseWeight * 1000, 1000, houseHeight * 1000),
new Point((houseWeight / 2) * 1000, 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point((houseWeight / 2) * 1000, houseSideWeight * 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point(houseWeight * 1000, houseSideWeight * 1000, houseHeight * 1000)
});
var frontRoofWall = AddPlate(new List <Point>
{
new Point(1000, 1000, houseHeight * 1000),
new Point((houseWeight / 2) * 1000, 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point(houseWeight * 1000, 1000, houseHeight * 1000)
});
var backRoofWall = AddPlate(new List <Point>
{
new Point(1000, houseSideWeight * 1000, houseHeight * 1000),
new Point((houseWeight / 2) * 1000, houseSideWeight * 1000, (houseHeight + (houseHeight / 2)) * 1000),
new Point(houseWeight * 1000, houseSideWeight * 1000, houseHeight * 1000)
});
var cutDoor = AddCutPlate(new List <Point>
{
new Point((houseWeight / 2) * 1000 - 1000, 1000, 50),
new Point((houseWeight / 2) * 1000 + 1000, 1000, 50),
new Point((houseWeight / 2) * 1000 + 1000, 1000, (houseHeight / 2) * 1000),
new Point((houseWeight / 2) * 1000 - 1000, 1000, (houseHeight / 2) * 1000)
});
var boolPart1 = new BooleanPart {
Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT, Father = frontWall
};
boolPart1.SetOperativePart(cutDoor);
boolPart1.Insert();
//cutDoor.Delete();
var cutBackDoor = AddCutPlate(new List <Point>
{
new Point((houseWeight / 2) * 1000 - 1000, houseSideWeight * 1000, 50),
new Point((houseWeight / 2) * 1000 + 1000, houseSideWeight * 1000, 50),
new Point((houseWeight / 2) * 1000 + 1000, houseSideWeight * 1000, (houseHeight / 2) * 1000),
new Point((houseWeight / 2) * 1000 - 1000, houseSideWeight * 1000, (houseHeight / 2) * 1000)
});
var boolPart3 = new BooleanPart {
Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT, Father = backWall
};
boolPart3.SetOperativePart(cutBackDoor);
boolPart3.Insert();
var cutLeftWindow = AddCutPlate(new List <Point>
{
new Point(3000, 1000, 2000),
new Point(5000, 1000, 2000),
new Point(5000, 1000, houseHeight * 1000 - 1000),
new Point(3000, 1000, houseHeight * 1000 - 1000)
});
var boolPart2 = new BooleanPart {
Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT, Father = frontWall
};
boolPart2.SetOperativePart(cutLeftWindow);
boolPart2.Insert();
cutLeftWindow.Delete();
var cutRightWindow = AddCutPlate(new List <Point>
{
new Point(houseWeight * 1000 - 4000, 1000, 2000),
new Point(houseWeight * 1000 - 2000, 1000, 2000),
new Point(houseWeight * 1000 - 2000, 1000, houseHeight * 1000 - 1000),
new Point(houseWeight * 1000 - 4000, 1000, houseHeight * 1000 - 1000)
});
var boolPart4 = new BooleanPart {
Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT, Father = frontWall
};
boolPart4.SetOperativePart(cutRightWindow);
boolPart4.Insert();
cutRightWindow.Delete();
model.CommitChanges();
}
else
{
Console.WriteLine("Please open Tekla first!");
}
Console.ReadLine();
}
public void CK09_PolygonCut()
{
// Current Workplane. Reminder how the user had the model before you did stuff.
TransformationPlane CurrentPlane = Model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
Picker Picker = new Picker();
Beam PickedPart = null;
try
{
PickedPart = (Beam)Picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART);
}
catch { PickedPart = null; }
if (PickedPart != null)
{
// Change the workplane to the coordinate system of the Beam
var psk = new TransformationPlane(PickedPart.GetCoordinateSystem());
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(psk);
ContourPlate ContourPlateObject = new ContourPlate();
ContourPlateObject.AssemblyNumber.Prefix = "XX";
ContourPlateObject.AssemblyNumber.StartNumber = 1;
ContourPlateObject.Name = "CUT";
ContourPlateObject.PartNumber.Prefix = "xx";
ContourPlateObject.Profile.ProfileString = "200";
ContourPlateObject.Material.MaterialString = "ANTIMATERIAL";
ContourPlateObject.Finish = "";
// This is the Important Part!
ContourPlateObject.Class = BooleanPart.BooleanOperativeClassName;
ContourPlateObject.Position.Depth = Position.DepthEnum.MIDDLE;
// when doing a polygon cut make sure you don't do roght alone edge
//..or sometimes you maight get a solid error and your part will disappeared
ContourPlateObject.AddContourPoint(new ContourPoint(new T3D.Point(-10, -10, 0), null));
ContourPlateObject.AddContourPoint(new ContourPoint(new T3D.Point(100, -10, 0), null));
ContourPlateObject.AddContourPoint(new ContourPoint(new T3D.Point(100, 100, 0), null));
ContourPlateObject.AddContourPoint(new ContourPoint(new T3D.Point(-10, 100, 0), null));
if (!ContourPlateObject.Insert())
{
Tekla.Structures.Model.Operations.Operation.DisplayPrompt("Plate wasn't created.");
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
}
else
{
BooleanPart PolygonCut = new BooleanPart();
PolygonCut.Father = PickedPart;
PolygonCut.OperativePart = ContourPlateObject;
PolygonCut.Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT;
if (!PolygonCut.Insert())
{
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
}
else
{
// We don't need the phisical part in the model anymore.
ContourPlateObject.Delete();
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
// Show the fitting in the model but the user
//..will never see the workplane change
Model.CommitChanges();
}
}
}
}
public void CK09_PartCut()
{
// Current Workplane. Reminder how the user had the model before you did stuff.
TransformationPlane CurrentPlane = Model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
Picker Picker = new Picker();
Beam PickedPart = null;
try
{
PickedPart = (Beam)Picker.PickObject(Picker.PickObjectEnum.PICK_ONE_PART);
}
catch { PickedPart = null; }
if (PickedPart != null)
{
// Change the workplane to the coordinate system of the Beam
var psk = new TransformationPlane(PickedPart.GetCoordinateSystem());
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(psk);
Beam BeamPartObject = new Beam();
BeamPartObject.StartPoint = new T3D.Point(400, 0, -200);
BeamPartObject.StartPoint = new T3D.Vector(400, 0, 200);
BeamPartObject.Profile.ProfileString = "D200";
BeamPartObject.Material.MaterialString = "ANTIMATERIAL";
BeamPartObject.Class = BooleanPart.BooleanOperativeClassName;
BeamPartObject.Name = "CUT";
BeamPartObject.Position.Depth = Position.DepthEnum.MIDDLE;
BeamPartObject.Position.Rotation = Position.RotationEnum.FRONT;
BeamPartObject.Position.Plane = Position.PlaneEnum.MIDDLE;
if (!BeamPartObject.Insert())
{
Tekla.Structures.Model.Operations.Operation.DisplayPrompt("Cut wasn't created.");
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
}
else
{
BooleanPart PartCut = new BooleanPart();
PartCut.Father = PickedPart;
PartCut.OperativePart = BeamPartObject;
PartCut.Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT;
if (!PartCut.Insert())
{
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
}
else
{
// We don't need the phisical part in the model anymore.
BeamPartObject.Delete();
// SetWorkPlane back to what user had before
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(CurrentPlane);
// Show the fitting in the model but the user
//..will never see the workplane change
Model.CommitChanges();
}
}
}
}
private void btnPartCut_Click(object sender, EventArgs e)
{
// Current Workplane. Remember how the user had the model before you made changes
TransformationPlane currentPlane = currentModel.GetWorkPlaneHandler().GetCurrentTransformationPlane();
TSMUI.Picker myPicker = new TSMUI.Picker();
Part pickedPart = null;
try
{
pickedPart = myPicker.PickObject(Tekla.Structures.Model.UI.Picker.PickObjectEnum.PICK_ONE_PART) as Part;
}
catch
{
pickedPart = null;
}
if (pickedPart != null)
{
// Change the workplaen to the coordinate system of the part
currentModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane(pickedPart.GetCoordinateSystem()));
Beam beamPartObject = new Beam();
beamPartObject.StartPoint = new T3D.Point(400, 0, -200);
beamPartObject.EndPoint = new T3D.Point(400, 0, 200);
beamPartObject.Profile.ProfileString = "D200";
beamPartObject.Material.MaterialString = "ANTIMATERIAL";
beamPartObject.Class = BooleanPart.BooleanOperativeClassName;
beamPartObject.Name = "CUT";;
beamPartObject.Position.Depth = Position.DepthEnum.MIDDLE;
beamPartObject.Position.Rotation = Position.RotationEnum.FRONT;
beamPartObject.Position.Plane = Position.PlaneEnum.MIDDLE;
if (!beamPartObject.Insert())
{
Tekla.Structures.Model.Operations.Operation.DisplayPrompt("Cut was not created.");
// Setworkplane back to what user had vefore changes
currentModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentPlane);
}
else
{
BooleanPart partCut = new BooleanPart();
partCut.Father = pickedPart;
partCut.OperativePart = beamPartObject;
partCut.Type = BooleanPart.BooleanTypeEnum.BOOLEAN_CUT;
if (!partCut.Insert())
{
// Setworkplane back to what user had before
currentModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentPlane);
}
else
{
// We don't need the physical part in the model anymore
beamPartObject.Delete();
// Setworkplane back to what user had before
currentModel.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentPlane);
// Show the fitting in the model but the user will never see the workplane change
currentModel.CommitChanges();
}
}
}
}