checkBldgElev(string strAlignName)
{
TinSurface objSurface = null;
bool exists = false;
try
{
ObjectId idLayer = Layer.manageLayers(fStake.GCAL_LAYER);
BaseObjs.regen();
}
catch (System.Exception)
{
Stake_GetSurfaceCPNT.getSurfaceFromXRef("STAKE", "STAKE");
objSurface = Surf.getTinSurface("CPNT-ON", out exists);
}
Alignment objAlign = Align.getAlignment(strAlignName);
string.Format("\"Test Building No. {0} :\n", strAlignName);
Form.ControlCollection objCntrls = default(Form.ControlCollection);
Control objCntrl = default(Control);
if (checkBldgElevs(objAlign.ObjectId))
{
objCntrls = (Form.ControlCollection)fGrid.Frame08.Controls;
objCntrl = objCntrls[strAlignName];
objCntrl.BackgroundImage = System.Drawing.Image.FromFile("R:\\TSET\\VBA\\CHECK.bmp");
objCntrls = (Form.ControlCollection)fGrid.Frame10.Controls;
objCntrl = objCntrls[string.Format("cmd{0}", strAlignName.Substring(5))];
objCntrl.Enabled = true;
}
else
{
objCntrls = (Form.ControlCollection)fGrid.Frame08.Controls;
objCntrl = objCntrls[strAlignName];
objCntrl.BackgroundImage = System.Drawing.Image.FromFile("R:\\TSET\\VBA\\X.bmp");
objCntrls = (Form.ControlCollection)fGrid.Frame10.Controls;
objCntrl = objCntrls[string.Format("cmd{0}", strAlignName.Substring(5))];
objCntrl.Enabled = false;
}
}
TP2()
{
Point3d pnt3d1 = UserInput.getPoint("\nPick Corner 1: ", Pub.pnt3dO, out escaped, out ps, osMode: 0);
if (pnt3d1 == Pub.pnt3dO)
{
return;
}
Point3d pnt3d2 = UserInput.getPoint("\nPick Baseline direction: ", pnt3d1, out escaped, out ps, osMode: 0);
if (pnt3d1 == Pub.pnt3dO)
{
return;
}
Vector2d v2dX = pnt3d2.Convert2d(BaseObjs.xyPlane) - pnt3d1.Convert2d(BaseObjs.xyPlane);
Vector2d v2dY = v2dX.RotateBy(System.Math.PI / 2);
Vector3d v3dY = new Vector3d(v2dY.X, v2dY.Y, 0);
Point3d pnt3dY = pnt3d1 + v3dY;
Matrix3d m3d = UCsys.addUCS(pnt3d1, pnt3d2, "temp");
Point3d pnt3d0 = Db.wcsToUcs(pnt3d1);
Polyline poly = jigPolylineArea(pnt3d0);
UCsys.setUCS2World();
poly.ObjectId.transformToWcs(BaseObjs._db);
escaped = UserInput.getUserInputDoubleAsString("\nEnter Elevation: ", out elev, elev);
if (escaped)
{
return;
}
escaped = UserInput.getUserInputDoubleAsString("\nEnter Slope: ", out slope, slope);
if (escaped)
{
return;
}
double dblSlope = double.Parse(slope);
Point3d pnt3dCEN = poly.getCentroid();
Point3d pnt3dTAR = UserInput.getPoint("\nPick edge of polygon in the Direction of Increasing Slope: ", pnt3dCEN, out escaped, out ps, osMode: 641);
if (pnt3dTAR == Pub.pnt3dO)
{
return;
}
ObjectIdCollection idspoly3d = new ObjectIdCollection();
double dblDist = 0.0;
ObjectId idPoly3d = ObjectId.Null;
pnt3dCEN = pnt3dCEN.addElevation(double.Parse(elev));
if (pnt3dTAR != Pub.pnt3dO)
{
dblDist = pnt3dCEN.getDistance(pnt3dTAR);
}
string nameLayer = string.Format("{0}-BORDER", "BASIN");
Layer.manageLayers(nameLayer);
int numObj = 0;
bool exists = false;
ObjectId idDict = Dict.getNamedDictionary(apps.lnkBrks, out exists);
if (exists)
{
numObj = idDict.getDictEntries().Count;
}
string nameSurf = string.Format("{0}{1}", "BASIN", numObj.ToString("00"));
ObjectId idDictObj = Dict.addSubDict(idDict, nameSurf);
using (BaseObjs._acadDoc.LockDocument())
{
if (pnt3dTAR != Pub.pnt3dO)
{
pnt3dTAR = new Point3d(pnt3dTAR.X, pnt3dTAR.Y, pnt3dCEN.Z + dblDist * dblSlope);
idPoly3d = Base_Tools45.C3D.DrawBasinBot.build3dPolyBasinBot(poly.ObjectId, pnt3dCEN, pnt3dTAR, dblSlope, nameLayer, apps.lnkBrks);
}
else
{
idPoly3d = Conv.poly_Poly3d(poly.ObjectId, double.Parse(elev), nameLayer);
}
idspoly3d.Add(idPoly3d);
TinSurface surf = Surf.addTinSurface(nameSurf, out exists);
if (exists)
{
Application.ShowAlertDialog(string.Format("Surface Name conflict - surface \"{0}\" already exists. Exiting...", nameSurf));
return;
}
surf.BreaklinesDefinition.AddStandardBreaklines(idspoly3d, 1.0, 0.0, 0.0, 0.0);
surf.Rebuild();
}
using (BaseObjs._acadDoc.LockDocument())
{
BaseObjs.regen();
}
}
getRadial_Perpendicular(Point3d pnt3dTar, Entity obj)
{
double dblAng = 0, dblLC = 0, dblM = 0;
Point3d pnt3dPolar = Pub.pnt3dO, pnt3dInt = Pub.pnt3dO;
Point3dCollection varPntInt = new Point3dCollection();
Line objLineDir = null;
ObjectId idLineDir = ObjectId.Null;
List <ObjectId> idList = new List <ObjectId>();
switch (obj.GetType().ToString())
{
case "Arc":
Arc objArc = (Arc)obj;
Point3d pnt3dCen = objArc.Center;
if (System.Math.Round(pnt3dCen.getDistance(pnt3dTar), 1) != 0)
{
idLineDir = Draw.addLine(pnt3dCen, pnt3dTar);
objLineDir = (Line)idLineDir.getEnt();
objLineDir.IntersectWith(objArc, Intersect.ExtendThis, varPntInt, IntPtr.Zero, IntPtr.Zero);
idLineDir.delete();
pnt3dInt = varPntInt[0];
}
else
{
Point3d pnt3dBeg = objArc.StartPoint;
Point3d pnt3dEnd = objArc.EndPoint;
dblAng = pnt3dBeg.getDirection(pnt3dEnd);
dblLC = pnt3dBeg.getDistance(pnt3dEnd);
pnt3dPolar = pnt3dBeg.traverse(dblAng, dblLC / 2);
dblM = objArc.Radius * (1 - System.Math.Cos(objArc.TotalAngle / 2));
pnt3dInt = pnt3dPolar.traverse(dblAng - PI / 2, dblM);
}
break;
case "Line":
Line objline = (Line)obj;
dblAng = objline.Angle + PI / 2;
pnt3dPolar = pnt3dTar.traverse(dblAng, 1);
idLineDir = Draw.addLine(pnt3dTar, pnt3dPolar);
objLineDir.IntersectWith(objline, Intersect.ExtendThis, varPntInt, IntPtr.Zero, IntPtr.Zero);
idLineDir.delete();
pnt3dInt = varPntInt[0];
break;
case "Polyline2d":
Polyline2d objPoly2d = (Polyline2d)obj;
break;
case "Polyline3d":
Polyline3d obj3dPoly = (Polyline3d)obj;
break;
case "Polyline":
Polyline objLWPoly = (Polyline)obj;
ObjectId idPoly = objLWPoly.ObjectId;
idPoly.changeProp(nameLayer: "STAKE-TEMP");
DBObjectCollection varEnts = new DBObjectCollection();
objLWPoly.Explode(varEnts);
objLWPoly.ObjectId.delete();
Layer.manageLayer(fStake.CNTL_LAYER, layerFrozen: true);
Point3d varPntPik = fMisc.PICK_PNT;
TypedValue[] tvs = new TypedValue[5];
tvs.SetValue(new TypedValue((int)DxfCode.Operator, "<OR"), 0);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Arc)).DxfName), 1);
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(typeof(Line)).DxfName), 2);
tvs.SetValue(new TypedValue((int)DxfCode.Operator, "OR>"), 3);
tvs.SetValue(new TypedValue((int)DxfCode.LayerName, "STAKE-TEMP"), 4);
Point3dCollection pnts3dBox = new Point3dCollection {
new Point3d(varPntPik.X - 1, varPntPik.Y - 1, 0),
new Point3d(varPntPik.X + 1, varPntPik.Y - 1, 0),
new Point3d(varPntPik.X + 1, varPntPik.Y + 1, 0),
new Point3d(varPntPik.X - 1, varPntPik.Y + 1, 0)
};
SelectionSet ss = Select.buildSSet(tvs, pnts3dBox);
ObjectId[] ids = ss.GetObjectIds();
for (int i = 0; i < ids.Length; i++)
{
idList.Add(ids[i]);
}
Layer.manageLayer(fStake.CNTL_LAYER, layerFrozen: false);
if (ids.Count() == 1)
{
obj = ids[0].getEnt();
}
switch (obj.GetType().ToString())
{
case "Arc":
objArc = (Arc)obj;
pnt3dCen = objArc.Center;
if (System.Math.Round(pnt3dCen.getDistance(pnt3dTar), 1) != 0)
{
idLineDir = Draw.addLine(pnt3dCen, pnt3dTar);
objLineDir = (Line)idLineDir.getEnt();
objLineDir.IntersectWith(objArc, Intersect.ExtendThis, varPntInt, IntPtr.Zero, IntPtr.Zero);
idLineDir.delete();
pnt3dInt = varPntInt[0];
}
else
{
Point3d pnt3dBeg = objArc.StartPoint;
Point3d pnt3dEnd = objArc.EndPoint;
dblAng = pnt3dBeg.getDirection(pnt3dEnd);
dblLC = pnt3dBeg.getDistance(pnt3dEnd);
pnt3dPolar = pnt3dBeg.traverse(dblAng, dblLC / 2);
dblM = objArc.Radius * (1 - System.Math.Cos(objArc.TotalAngle / 2));
pnt3dInt = pnt3dPolar.traverse(dblAng - PI / 2, dblM);
}
break;
case "Line":
objline = (Line)obj;
dblAng = objline.Angle + PI / 2;
pnt3dPolar = pnt3dTar.traverse(dblAng, 1);
idLineDir = Draw.addLine(pnt3dTar, pnt3dPolar);
objLineDir = (Line)idLineDir.getEnt();
objLineDir.IntersectWith(objline, Intersect.ExtendThis, varPntInt, IntPtr.Zero, IntPtr.Zero);
idLineDir.delete();
pnt3dInt = varPntInt[0];
break;
}
foreach (DBObject dbObj in varEnts)
{
idList.Add(dbObj.ObjectId);
}
foreach (ObjectId id in idList)
{
id.delete();
}
break;
}
BaseObjs.regen();
return(pnt3dInt);
}