public static bool setTofMode(uint sessionIndex, uint port, GateType gateNum, TofMode tofMode)
{
int error_code;
bool isSetPre = false;
AscanWaveDectionMode waveMode = AscanWaveDectionMode.Rf;
IFActive iFGate = IFActive.OFF;
error_code = GetGateDAQ.IFActive(SelectAscan.sessionIndex, SelectAscan.port, GateType.I, ref iFGate);
if (error_code != 0)
{
return(isSetPre = true);
}
error_code = GetAsacnVideoDAQ.DetectionWaveMode(SelectAscan.sessionIndex, SelectAscan.port, ref waveMode);
if (error_code != 0)
{
return(isSetPre = true);
}
if (tofMode == TofMode.ZeroAfter || tofMode == TofMode.ZeroBefore)
{
if (waveMode != AscanWaveDectionMode.Rf)
{
MessageShow.show("Warn:TOF Mode = Zero Befor,Need to set Wave Mode->RF Mode!",
"警告：TOF模式为Zero Befor，必须设置检波模式为RF模式");
return(isSetPre = true);
}
else if ((gateNum == GateType.I) && (iFGate == IFActive.ON))
{
MessageShow.show("Warn:The function of IF Gate or IF Start has opened, can't Set!",
"警告：IF Gate 或 IF Start功能开启，不能设置!");
return(isSetPre = true);
}
}
else if (tofMode == TofMode.Peak)
{
if ((gateNum == GateType.I) && (iFGate == IFActive.ON))
{
MessageShow.show("Warn:The function of IF Gate or IF Start has opened, can't Set!",
"警告:IF Gate 或 IF Start功能开启，不能设置!");
return(isSetPre = true);
}
}
error_code = SetGateDAQ.tofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, tofMode);
if (error_code != 0)
{
return(isSetPre = true);
}
return(isSetPre);
}
public static bool WaveMode(uint sessionIndex, AscanWaveDectionMode waveMode)
{
bool isSetPre = false;
for (int i = 0; i < batchSessionsInfo.Count; i++)
{
if (batchSessionsInfo[i].sessionIndex == sessionIndex)
{
isSetPre = SetAscanVideoDAQ.WaveMode(sessionIndex, (uint)batchSessionsInfo[i].port, waveMode);
if (isSetPre)
{
break;
}
}
}
return(isSetPre);
}
/**Set wave mode to Positive、Negative、Full Wave acocording to tofMode.*/
public static bool WaveMode(uint ascanNum, uint ascanPort, AscanWaveDectionMode waveMode)
{
int error_code;
int gateTotNum = 4;
GateType gateNum;
int gateI = (int)GateType.I;
int gateA = (int)GateType.A;
int gateB = (int)GateType.B;
int gateC = (int)GateType.C;
bool isSetPre = true;
TofMode[] tofMode = new TofMode[gateTotNum];
TofMode tofModeFlank = TofMode.Flank;
for (int i = 0; i < gateTotNum; i++)
{
gateNum = (GateType)i;
error_code = GetGateDAQ.TofMode(SelectAscan.sessionIndex, SelectAscan.port, gateNum, ref tofMode[i]);
if (error_code != 0)
{
return(isSetPre);
}
}
if (waveMode == AscanWaveDectionMode.SemiPositve || waveMode == AscanWaveDectionMode.SemiNegtive ||
waveMode == AscanWaveDectionMode.Full)
{
if (tofMode[gateI] > tofModeFlank || tofMode[gateA] > tofModeFlank ||
tofMode[gateB] > tofModeFlank || tofMode[gateC] > tofModeFlank) //Tof Mode are Zero Before or Zero After
{
MessageShow.show("Tof Mode = Zero Before or Zero After, need to set Receiver->RF!",
"Tof Mode = Zero Before or Zero After,必须设置Receiver->RF!");
return(isSetPre);
}
}
error_code = SetAscanVideoDAQ.DetectionWaveMode(ascanNum, ascanPort, waveMode);
if (error_code != 0)
{
return(isSetPre);
}
return(isSetPre = false);
}
private static int DetectionWaveMode(uint ascanNum, uint ascanPort, AscanWaveDectionMode mode)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.DetectionWaveMode;
uint val = (uint)mode;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqSet(ascanNum, ascanPort, attr, val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Set the Detection wave mode of Asacn failed", "错误：设置A扫的检波失败");
}
return(error_code);
}
public static int DetectionWaveMode(uint ascanNum, uint port, ref AscanWaveDectionMode mode)
{
int error_code;
uint attr = DaqAttrType.ascanVideo.DetectionWaveMode;
uint val = 0;
if (ascanNum < ascanNumMin || ascanNum > ascanNumMax)
{
error_code = -1;
return(error_code);
}
error_code = DAQ.daqGet(ascanNum, port, attr, ref val);
if (error_code != (int)PDAQ_ERR.GOOD)
{
MessageShow.show("Error:Get the Detection wave mode of Asacn failed", "错误：获得A扫的检波失败");
}
mode = (AscanWaveDectionMode)val;
return(error_code);
}
public void setAscanAxis(TChart tChart, int selectGate)
{
int error_code;
AscanWaveDectionMode mode = AscanWaveDectionMode.Rf;
double gateDelay = 0;
double gateRange = 0;
error_code = GetAsacnVideoDAQ.DetectionWaveMode(0, 0, ref mode);
if (error_code != 0)
{
return;
}
switch (mode)
{
case AscanWaveDectionMode.Rf:
tChart.Axes.Bottom.SetMinMax(-1, 1);
break;
case AscanWaveDectionMode.Full:
case AscanWaveDectionMode.SemiNegtive:
case AscanWaveDectionMode.SemiPositve:
tChart.Axes.Bottom.SetMinMax(0, 1);
break;
default:
error_code = -1;
MessageShow.show("Initial Ascan teeChart axe failed!", "初始化A扫描画图坐标轴失败！");
break;
}
GetGateDAQ.Delay(0, 0, (GateType)selectGate, ref gateDelay);
GetGateDAQ.Width(0, 0, (GateType)selectGate, ref gateRange);
this.gateDelay = gateDelay;
this.gateRange = gateRange;
tChart.Axes.Left.SetMinMax(gateDelay, gateDelay + gateRange);
}
//使得筛选的通道和当前显示通道所有参数变得一样
public static int Param(uint sessionIndex, uint selPort)
{
int error_code = 0;
bool isSetPre = false;
double delay = 0;
double range = 0;
double gain = 0;
uint envlopDecay = 0;
AscanWaveDectionMode waveMode = AscanWaveDectionMode.SemiPositve;
RecieverType type = RecieverType.Pc;
AscanEnvelopActive envelopActive = AscanEnvelopActive.OFF;
int gateTol = 4;
TofMode tofMode = TofMode.Flank;
TofMode[] tofModeArr = new TofMode[gateTol];
GateAlarmLogic[] gateAlarmLogic = new GateAlarmLogic[gateTol];
GateAlarmActive[] gateAlarmActive = new GateAlarmActive[gateTol];
double[] gateDelay = new double[gateTol];
double[] gateWidth = new double[gateTol];
double[] threshold = new double[gateTol];
SuppressCounterActive[] scActive = new SuppressCounterActive[gateTol];
uint[] scCount = new uint[gateTol];
IFActive ifActive = IFActive.OFF;
AscanIFActive ascanIfActive = AscanIFActive.OFF;
//取得当前通道的所有参数
error_code = GetAsacnVideoDAQ.Delay(sessionIndex, selPort, ref delay);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetAsacnVideoDAQ.Range(sessionIndex, selPort, ref range);
error_code |= GetRecieverDAQ.AnalogGain(sessionIndex, selPort, ref gain);
error_code |= GetAsacnVideoDAQ.EnvlopDecayFactor(sessionIndex, selPort, ref envlopDecay);
error_code |= GetAsacnVideoDAQ.DetectionWaveMode(sessionIndex, selPort, ref waveMode);
error_code |= GetPulserTransmitDAQ.RecieverMode(sessionIndex, selPort, ref type);
error_code |= GetAsacnVideoDAQ.EnvlopActive(sessionIndex, selPort, ref envelopActive);
error_code |= GetGateDAQ.IFActive(sessionIndex, selPort, GateType.I, ref ifActive);
error_code |= GetAsacnVideoDAQ.IFActive(sessionIndex, selPort, ref ascanIfActive);
for (int i = 0; i < gateTol; i++)
{
GateType gateIndex = (GateType)i;
error_code |= GetGateDAQ.TofMode(sessionIndex, selPort, gateIndex, ref tofModeArr[i]);
error_code |= GetGateDAQ.AlarmLogic(sessionIndex, selPort, gateIndex, ref gateAlarmLogic[i]);
error_code |= GetGateDAQ.AlarmActive(sessionIndex, selPort, gateIndex, ref gateAlarmActive[i]);
error_code |= GetGateDAQ.Delay(sessionIndex, selPort, gateIndex, ref gateDelay[i]);
error_code |= GetGateDAQ.Width(sessionIndex, selPort, gateIndex, ref gateWidth[i]);
error_code |= GetGateDAQ.Threshold(sessionIndex, selPort, gateIndex, ref threshold[i]);
error_code |= GetGateDAQ.ScActive(sessionIndex, selPort, gateIndex, ref scActive[i]);
error_code |= GetGateDAQ.ScCounter(sessionIndex, selPort, gateIndex, ref scCount[i]);
}
if (error_code != 0)
{
return(error_code);
}
//赋值
for (int i = 0; i < batchSessionsInfo.Count; i++)
{
uint port = (uint)batchSessionsInfo[i].port;
uint seIndex = (uint)batchSessionsInfo[i].sessionIndex;
//第二种情况||batchSessionsInfo[i].sessionIndex ！= sessionIndex
//if (batchSessionsInfo[i].sessionIndex == sessionIndex && port != selPort )//以selPort号为依据配置同一块板卡的其他虚拟通道的参数
{
error_code = SetAscanVideoDAQ.Delay(seIndex, port, delay);
error_code |= SetAscanVideoDAQ.Range(seIndex, port, range);
error_code |= SetReceiverDAQ.AnalogGain(seIndex, port, gain);
error_code |= SetAscanVideoDAQ.EnvlopDecayFactor(seIndex, port, envlopDecay);
isSetPre = SetAscanVideoDAQ.WaveMode(seIndex, port, waveMode);
error_code |= SetPulserTransmitDAQ.RecieverMode(seIndex, port, type);
error_code |= SetAscanVideoDAQ.EnvlopActive(seIndex, port, envelopActive);
for (int j = 0; j < gateTol; j++)
{
GateType gateIndex = (GateType)j;
isSetPre |= SetGateDAQ.setTofMode(seIndex, port, gateIndex, tofModeArr[j]);
error_code |= SetGateDAQ.AlarmLogic(seIndex, port, gateIndex, gateAlarmLogic[j]);
error_code |= SetGateDAQ.AlarmActive(seIndex, port, gateIndex, gateAlarmActive[j]);
error_code |= SetGateDAQ.Delay(seIndex, port, gateIndex, gateDelay[j]);
error_code |= SetGateDAQ.Width(seIndex, port, gateIndex, gateWidth[j]);
error_code |= SetGateDAQ.Threshold(seIndex, port, gateIndex, threshold[j]);
error_code |= SetGateDAQ.ScActive(seIndex, port, gateIndex, scActive[j]);
error_code |= SetGateDAQ.ScCounter(seIndex, port, gateIndex, scCount[j]);
if (error_code != 0)
{
return(error_code);
}
}
error_code |= GetGateDAQ.TofMode(seIndex, port, GateType.I, ref tofMode);
if (ifActive == IFActive.ON && ascanIfActive == AscanIFActive.ON)
{
if (tofMode != TofMode.Flank)
{
MessageShow.show("Warning:" + seIndex + port + "The TOF Mode GateI must select Flank mode!",
"警告：" + sessionIndex + port + "门模式门I未选择Flank模式!");
return(error_code = -1);
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.ON);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.ON);
}
}
else
{
error_code |= SetGateDAQ.iFActive(seIndex, port, GateType.I, IFActive.OFF);
error_code |= SetAscanVideoDAQ.IFActive(seIndex, port, AscanIFActive.OFF);
}
if (error_code != 0)
{
return(error_code);
}
}
}
return(error_code);
}