static async Task RunOptionsAndReturnExitCodeAsync(Options o)
{
#region parse verbosity option
switch (o.Verbosity)
{
// quiet
case "q":
case "quiet":
verbosityLevel = VerbosityLevel.Quiet;
break;
// minimal
case "m":
case "minimal":
verbosityLevel = VerbosityLevel.Minimal;
break;
// normal
case "n":
case "normal":
verbosityLevel = VerbosityLevel.Normal;
break;
// detailed
case "d":
case "detailed":
verbosityLevel = VerbosityLevel.Detailed;
break;
// diagnostic
case "diag":
case "diagnostic":
verbosityLevel = VerbosityLevel.Diagnostic;
break;
default:
throw new ArgumentException("Invalid option for Verbosity");
}
#endregion
Console.WriteLine(headerInfo);
Console.WriteLine(copyrightInfo);
Console.WriteLine();
#region target processing
// if a target name was specified, try to be smart and set the platform accordingly (in case it wasn't specified)
if (string.IsNullOrEmpty(o.Platform) &&
!string.IsNullOrEmpty(o.TargetName))
{
// easiest one: ESP32
if (o.TargetName.Contains("ESP32"))
{
o.Platform = "esp32";
}
else if (
o.TargetName.Contains("ST") ||
o.TargetName.Contains("MBN_QUAIL") ||
o.TargetName.Contains("NETDUINO3") ||
o.TargetName.Contains("GHI FEZ") ||
o.TargetName.Contains("IngenuityMicro") ||
o.TargetName.Contains("ORGPAL")
)
{
// candidates for STM32
o.Platform = "stm32";
}
else if (
o.TargetName.Contains("TI_CC1352")
)
{
// candidates for TI CC13x2
o.Platform = "cc13x2";
}
else
{
// other supported platforms will go here
// in case a wacky target is entered by the user, the package name will be checked against Bintray repo
}
}
#endregion
#region platform specific options
// if an option was specified and has an obvious platform, try to be smart and set the platform accordingly (in case it wasn't specified)
if (string.IsNullOrEmpty(o.Platform))
{
// JTAG related
if (
o.ListJtagDevices ||
!string.IsNullOrEmpty(o.JtagDeviceId) ||
o.HexFile.Any() ||
o.BinFile.Any())
{
o.Platform = "stm32";
}
// DFU related
else if (
o.ListDevicesInDfuMode ||
!string.IsNullOrEmpty(o.DfuDeviceId) ||
!string.IsNullOrEmpty(o.DfuFile))
{
o.Platform = "stm32";
}
// ESP32 related
else if (
!string.IsNullOrEmpty(o.SerialPort) ||
(o.BaudRate != 921600) ||
(o.Esp32FlashMode != "dio") ||
(o.Esp32FlashFrequency != 40))
{
o.Platform = "esp32";
}
}
#endregion
#region ESP32 platform options
if (o.Platform == "esp32")
{
// COM port is mandatory for ESP32
if (string.IsNullOrEmpty(o.SerialPort))
{
_exitCode = ExitCodes.E6001;
return;
}
EspTool espTool;
try
{
espTool = new EspTool(
o.SerialPort,
o.BaudRate,
o.Esp32FlashMode,
o.Esp32FlashFrequency);
}
catch (Exception)
{
_exitCode = ExitCodes.E4005;
return;
}
EspTool.DeviceInfo esp32Device;
if (espTool.ComPortAvailable)
{
try
{
esp32Device = espTool.TestChip();
}
catch (EspToolExecutionException ex)
{
_exitCode = ExitCodes.E4000;
_extraMessage = ex.Message;
return;
}
}
else
{
// couldn't open COM port
// done here, this command has no further processing
_exitCode = ExitCodes.E6000;
return;
}
if (verbosityLevel >= VerbosityLevel.Normal)
{
Console.WriteLine($"Connected to ESP32 { esp32Device.ChipName } with MAC address { esp32Device.MacAddress }");
Console.WriteLine($"features { esp32Device.Features }");
string flashSize = esp32Device.FlashSize >= 0x10000 ? $"{ esp32Device.FlashSize / 0x100000 }MB" : $"{ esp32Device.FlashSize / 0x400 }kB";
Console.WriteLine($"Flash information: manufacturer 0x{ esp32Device.FlashManufacturerId } device 0x{ esp32Device.FlashDeviceModelId } size { flashSize }");
}
// set verbosity
espTool.Verbosity = verbosityLevel;
// backup requested
if (!string.IsNullOrEmpty(o.BackupPath) ||
!string.IsNullOrEmpty(o.BackupFile))
{
try
{
// backup path specified, backup deployment
_exitCode = Esp32Operations.BackupFlash(espTool, esp32Device, o.BackupPath, o.BackupFile, verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
catch (ReadEsp32FlashException ex)
{
_exitCode = ExitCodes.E4004;
_extraMessage = ex.Message;
// done here
return;
}
}
// update operation requested?
if (o.Update)
{
try
{
// write flash
_exitCode = await Esp32Operations.UpdateFirmwareAsync(
espTool,
esp32Device,
o.TargetName,
true,
o.FwVersion,
o.Stable,
o.DeploymentImage,
null,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
// done here
_exitCode = ExitCodes.OK;
return;
}
catch (ReadEsp32FlashException ex)
{
_exitCode = ExitCodes.E4004;
_extraMessage = ex.Message;
}
catch (WriteEsp32FlashException ex)
{
_exitCode = ExitCodes.E4003;
_extraMessage = ex.Message;
}
catch (EspToolExecutionException ex)
{
_exitCode = ExitCodes.E4000;
_extraMessage = ex.Message;
}
}
// it's OK to deploy after update
if (o.Deploy)
{
// need to take care of flash address
string appFlashAddress = null;
if (o.FlashAddress.Any())
{
// take the first address, it should be the only one valid
appFlashAddress = o.FlashAddress.ElementAt(0);
}
else
{
_exitCode = ExitCodes.E9009;
return;
}
// this to flash a deployment image without updating the firmware
try
{
// write flash
_exitCode = await Esp32Operations.UpdateFirmwareAsync(
espTool,
esp32Device,
null,
false,
null,
false,
o.DeploymentImage,
appFlashAddress,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
// done here
_exitCode = ExitCodes.OK;
return;
}
catch (ReadEsp32FlashException ex)
{
_exitCode = ExitCodes.E4004;
_extraMessage = ex.Message;
}
catch (WriteEsp32FlashException ex)
{
_exitCode = ExitCodes.E4003;
_extraMessage = ex.Message;
}
catch (EspToolExecutionException ex)
{
_exitCode = ExitCodes.E4000;
_extraMessage = ex.Message;
}
}
// done here
return;
}
#endregion
#region STM32 platform options
if (o.Platform == "stm32")
{
if (o.ListDevicesInDfuMode)
{
var connecteDevices = StmDfuDevice.ListDfuDevices();
if (connecteDevices.Count == 0)
{
Console.WriteLine("No DFU devices found");
}
else
{
Console.WriteLine("-- Connected DFU devices --");
foreach (string deviceId in connecteDevices)
{
Console.WriteLine(deviceId);
}
Console.WriteLine("---------------------------");
}
// done here, this command has no further processing
_exitCode = ExitCodes.OK;
return;
}
if (o.ListJtagDevices)
{
try
{
var connecteDevices = StmJtagDevice.ListDevices();
if (connecteDevices.Count == 0)
{
Console.WriteLine("No JTAG devices found");
}
else
{
Console.WriteLine("-- Connected JTAG devices --");
foreach (string deviceId in connecteDevices)
{
Console.WriteLine(deviceId);
}
Console.WriteLine("---------------------------");
}
// done here, this command has no further processing
_exitCode = ExitCodes.OK;
}
catch (Exception ex)
{
// exception with
_exitCode = ExitCodes.E5000;
_extraMessage = ex.Message;
}
return;
}
if (!string.IsNullOrEmpty(o.DfuFile))
{
// there is a DFU file argument, so follow DFU path
var dfuDevice = new StmDfuDevice(o.DfuDeviceId);
if (!dfuDevice.DevicePresent)
{
// no DFU device found
// done here, this command has no further processing
_exitCode = ExitCodes.E1000;
return;
}
if (verbosityLevel >= VerbosityLevel.Normal)
{
Console.WriteLine($"Connected to DFU device with ID { dfuDevice.DeviceId }");
}
// set verbosity
dfuDevice.Verbosity = verbosityLevel;
// get mass erase option
dfuDevice.DoMassErase = o.MassErase;
try
{
dfuDevice.FlashDfuFile(o.DfuFile);
// done here, this command has no further processing
_exitCode = ExitCodes.OK;
return;
}
catch (DfuFileDoesNotExistException)
{
// DFU file doesn't exist
_exitCode = ExitCodes.E1002;
}
catch (Exception ex)
{
// exception with DFU operation
_exitCode = ExitCodes.E1003;
_extraMessage = ex.Message;
}
}
else if (
o.BinFile.Any() &&
o.HexFile.Any())
{
// this has to be a JTAG connected device
#region STM32 JTAG options
try
{
var jtagDevice = new StmJtagDevice(o.JtagDeviceId);
if (!jtagDevice.DevicePresent)
{
// no JTAG device found
// done here, this command has no further processing
_exitCode = ExitCodes.E5001;
return;
}
if (verbosityLevel >= VerbosityLevel.Normal)
{
Console.WriteLine($"Connected to JTAG device with ID { jtagDevice.DeviceId }");
}
// set verbosity
jtagDevice.Verbosity = verbosityLevel;
// get mass erase option
jtagDevice.DoMassErase = o.MassErase;
if (o.HexFile.Any())
{
_exitCode = jtagDevice.FlashHexFiles(o.HexFile);
// done here
return;
}
if (o.BinFile.Any())
{
_exitCode = jtagDevice.FlashBinFiles(o.BinFile, o.FlashAddress);
// done here
return;
}
}
catch (CantConnectToJtagDeviceException)
{
// done here, this command has no further processing
_exitCode = ExitCodes.E5002;
}
#endregion
}
else if (!string.IsNullOrEmpty(o.TargetName))
{
// update operation requested?
if (o.Update)
{
// this to update the device with fw from Bintray
// need to take care of flash address
string appFlashAddress = null;
if (o.FlashAddress.Any())
{
// take the first address, it should be the only one valid
appFlashAddress = o.FlashAddress.ElementAt(0);
}
_exitCode = await Stm32Operations.UpdateFirmwareAsync(
o.TargetName,
o.FwVersion,
o.Stable,
true,
o.DeploymentImage,
appFlashAddress,
o.DfuDeviceId,
o.JtagDeviceId,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
// it's OK to deploy after update
if (o.Deploy)
{
// this to flash a deployment image without updating the firmware
// need to take care of flash address
string appFlashAddress = null;
if (o.FlashAddress.Any())
{
// take the first address, it should be the only one valid
appFlashAddress = o.FlashAddress.ElementAt(0);
}
else
{
_exitCode = ExitCodes.E9009;
return;
}
_exitCode = await Stm32Operations.UpdateFirmwareAsync(
o.TargetName,
null,
false,
false,
o.DeploymentImage,
appFlashAddress,
o.DfuDeviceId,
o.JtagDeviceId,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
// reset MCU requested?
if (o.ResetMcu)
{
_exitCode = Stm32Operations.ResetMcu(
o.JtagDeviceId,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
}
}
#endregion
#region TI CC13x2 platform options
if (o.Platform == "cc13x2")
{
if (!string.IsNullOrEmpty(o.TargetName))
{
// update operation requested?
if (o.Update)
{
// this to update the device with fw from Bintray
// need to take care of flash address
string appFlashAddress = null;
if (o.FlashAddress.Any())
{
// take the first address, it should be the only one valid
appFlashAddress = o.FlashAddress.ElementAt(0);
}
_exitCode = await CC13x26x2Operations.UpdateFirmwareAsync(
o.TargetName,
o.FwVersion,
o.Stable,
true,
o.DeploymentImage,
appFlashAddress,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
// it's OK to deploy after update
if (o.Deploy)
{
// this to flash a deployment image without updating the firmware
// need to take care of flash address
string appFlashAddress = null;
if (o.FlashAddress.Any())
{
// take the first address, it should be the only one valid
appFlashAddress = o.FlashAddress.ElementAt(0);
}
else
{
_exitCode = ExitCodes.E9009;
return;
}
_exitCode = await CC13x26x2Operations.UpdateFirmwareAsync(
o.TargetName,
null,
false,
false,
o.DeploymentImage,
appFlashAddress,
verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
// reset MCU requested?
if (o.ResetMcu)
{
// can't reset CC13x2 device without configuration file
// would require to specify the exact target name and then had to try parsing that
_exitCode = ExitCodes.E9000;
// done here
return;
}
}
if (o.TIInstallXdsDrivers)
{
_exitCode = CC13x26x2Operations.InstallXds110Drivers(verbosityLevel);
if (_exitCode != ExitCodes.OK)
{
// done here
return;
}
}
}
#endregion
}
internal static async System.Threading.Tasks.Task <ExitCodes> UpdateFirmwareAsync(
string targetName,
string fwVersion,
bool stable,
bool updateFw,
string applicationPath,
string deploymentAddress,
string dfuDeviceId,
string jtagId,
VerbosityLevel verbosity)
{
bool isApplicationBinFile = false;
StmDfuDevice dfuDevice;
StmJtagDevice jtagDevice;
// if a target name wasn't specified use the default (and only available) ESP32 target
if (string.IsNullOrEmpty(targetName))
{
return(ExitCodes.E1000);
}
Stm32Firmware firmware = new Stm32Firmware(
targetName,
fwVersion,
stable)
{
Verbosity = verbosity
};
// need to download update package?
if (updateFw)
{
var operationResult = await firmware.DownloadAndExtractAsync();
if (operationResult != ExitCodes.OK)
{
return(operationResult);
}
// download successful
}
// setup files to flash
var filesToFlash = new List <string>();
if (updateFw)
{
filesToFlash.Add(firmware.nanoBooterFile);
filesToFlash.Add(firmware.nanoCLRFile);
}
// need to include application file?
if (!string.IsNullOrEmpty(applicationPath))
{
// check application file
if (File.Exists(applicationPath))
{
// check if application is BIN or HEX file
if (Path.GetExtension(applicationPath) == "hex")
{
// HEX we are good with adding it to the flash package
filesToFlash.Add(new FileInfo(applicationPath).FullName);
}
else
{
// BIN app, set flag
isApplicationBinFile = true;
}
}
else
{
return(ExitCodes.E9008);
}
}
var connectedStDfuDevices = StmDfuDevice.ListDfuDevices();
var connectedStJtagDevices = StmJtagDevice.ListDevices();
// need DFU or JTAG device
if (firmware.HasDfuPackage && connectedStDfuDevices.Count != 0)
{
// DFU package
dfuDevice = new StmDfuDevice(dfuDeviceId);
if (!dfuDevice.DevicePresent)
{
// no DFU device found
// done here, this command has no further processing
return(ExitCodes.E1000);
}
if (verbosity >= VerbosityLevel.Normal)
{
Console.WriteLine($"Connected to DFU device with ID { dfuDevice.DeviceId }");
}
// set verbosity
dfuDevice.Verbosity = verbosity;
try
{
dfuDevice.FlashDfuFile(firmware.DfuPackage);
// done here, this command has no further processing
return(ExitCodes.OK);
}
catch (Exception)
{
// exception
return(ExitCodes.E1003);
}
}
else if (connectedStJtagDevices.Count != 0)
{
// JATG device
jtagDevice = new StmJtagDevice(jtagId);
if (!jtagDevice.DevicePresent)
{
// no JTAG device found
// done here, this command has no further processing
return(ExitCodes.E5001);
}
if (verbosity >= VerbosityLevel.Normal)
{
Console.WriteLine($"Connected to JTAG device with ID { jtagDevice.DeviceId }");
}
// set verbosity
jtagDevice.Verbosity = verbosity;
ExitCodes programResult = ExitCodes.OK;
// write HEX files to flash
if (filesToFlash.Any(f => f.EndsWith(".hex")))
{
programResult = jtagDevice.FlashHexFiles(filesToFlash);
}
if (programResult == ExitCodes.OK && isApplicationBinFile)
{
// now program the application file
programResult = jtagDevice.FlashBinFiles(new List <string>()
{
applicationPath
}, new List <string>()
{
deploymentAddress
});
}
if (updateFw)
{
// reset MCU
jtagDevice.ResetMcu();
}
return(programResult);
}
else
{
// no device was found to update.
return(ExitCodes.E7000);
}
}