public Form1()
{
InitializeComponent();
//ARの設定
//AR用カメラパラメタファイルをロード
NyARParam ap = NyARParam.createFromARParamFile(new StreamReader(AR_CAMERA_FILE));
ap.changeScreenSize(320, 240);
//AR用のパターンコードを読み出し
NyARCode code = NyARCode.createFromARPattFile(new StreamReader(AR_CODE_FILE),16, 16);
NyARDoubleMatrix44 result_mat = new NyARDoubleMatrix44();
//計算モードの設定
//キャプチャを作る
/**************************************************
このコードは、0番目（一番初めに見つかったキャプチャデバイス）
を使用するようにされています。
複数のキャプチャデバイスを持つシステムの場合、うまく動作しないかもしれません。
n番目のデバイスを使いたいときには、CaptureDevice cap=cl[0];←ここの0を変えてください。
手動で選択させる方法は、SimpleLiteDirect3Dを参考にしてください。
**************************************************/
CaptureDeviceList cl=new CaptureDeviceList();
CaptureDevice cap=cl[0];
cap.SetCaptureListener(this);
cap.PrepareCapture(320, 240,30);
this.m_cap = cap;
//ラスタを作る。
this.m_raster = new DsRgbRaster(cap.video_width, cap.video_height,NyARBufferType.OBJECT_CS_Bitmap);
//１パターンのみを追跡するクラスを作成
this.m_ar = NyARSingleDetectMarker.createInstance(ap, code, 80.0);
this.m_ar.setContinueMode(false);
}
public SimpleLiteD3d(NyARToolkitCS topLevelForm, ResourceBuilder i_resource)
{
NyMath.initialize();
this._capture = i_resource.createWmCapture();
this._capture.setOnSample(this);
this._d3dmgr = i_resource.createD3dManager(topLevelForm);
this._back_ground = i_resource.createBackGround(this._d3dmgr);
this._d3dcube = new ColorCube(this._d3dmgr.d3d_device,40);
//AR用のパターンコードを読み出
NyARCode code = i_resource.createNyARCode();
//ARラスタを作る(DirectShowキャプチャ仕様)。
this.m_raster = i_resource.createARRaster();
//１パターンのみを追跡するクラスを作成
this.m_ar = new NyARSingleDetectMarker(i_resource.ar_param, code, 80.0, this.m_raster.getBufferType());
//計算モードの設定
this.m_ar.setContinueMode(false);
////立方体（頂点数8）の準備
return;
}
public void Test_arDetectMarkerLite()
{
Assembly assembly = Assembly.GetExecutingAssembly();
//AR用カメラパラメタファイルをロード
NyARParam ap = new NyARParam();
ap.loadARParam(assembly.GetManifestResourceStream(RES_CAMERA));
ap.changeScreenSize(320, 240);
//AR用のパターンコードを読み出し
NyARCode code = new NyARCode(16, 16);
Stream sr1=assembly.GetManifestResourceStream(RES_PATT);
code.loadARPatt(new StreamReader(sr1));
//試験イメージの読み出し(320x240 BGRAのRAWデータ)
StreamReader sr = new StreamReader(assembly.GetManifestResourceStream(RES_DATA));
BinaryReader bs = new BinaryReader(sr.BaseStream);
byte[] raw = bs.ReadBytes(320 * 240 * 4);
NyARRgbRaster_BGRA ra = new NyARRgbRaster_BGRA(320, 240,false);
ra.wrapBuffer(raw);
// Blank_Raster ra=new Blank_Raster(320, 240);
//１パターンのみを追跡するクラスを作成
// NyARSingleDetectMarker_Quad ar = new NyARSingleDetectMarker_Quad(ap, code, 80.0);
NyARSingleDetectMarker ar = new NyARSingleDetectMarker(ap, code, 80.0,ra.getBufferType());
NyARTransMatResult result_mat = new NyARTransMatResult();
ar.setContinueMode(false);
ar.detectMarkerLite(ra, 100);
ar.getTransmationMatrix(result_mat);
//マーカーを検出
for (int i3 = 0; i3 < 10; i3++)
{
Stopwatch sw = new Stopwatch();
sw.Start();
for (int i = 0; i < 10; i++)
{
//変換行列を取得
ar.detectMarkerLite(ra, 100);
ar.getTransmationMatrix(result_mat);
}
sw.Stop();
Debug.WriteLine(sw.ElapsedMilliseconds + "[ms]");
}
return;
}
public bool InitializeApplication(Form1 topLevelForm,CaptureDevice i_cap_device)
{
topLevelForm.ClientSize=new Size(SCREEN_WIDTH,SCREEN_HEIGHT);
//キャプチャを作る(QVGAでフレームレートは30)
i_cap_device.SetCaptureListener(this);
i_cap_device.PrepareCapture(SCREEN_WIDTH, SCREEN_HEIGHT, 30);
this._cap = i_cap_device;
//ARの設定
//ARラスタを作る(DirectShowキャプチャ仕様)。
this._raster = new DsRgbRaster(i_cap_device.video_width, i_cap_device.video_height,NyARBufferType.BYTE1D_B8G8R8X8_32);
//AR用カメラパラメタファイルをロードして設定
NyARParam ap = NyARParam.createFromARParamFile(new StreamReader(AR_CAMERA_FILE));
ap.changeScreenSize(SCREEN_WIDTH, SCREEN_HEIGHT);
//AR用のパターンコードを読み出し
NyARCode code = NyARCode.createFromARPattFile(new StreamReader(AR_CODE_FILE),16, 16);
//１パターンのみを追跡するクラスを作成
this._ar = NyARSingleDetectMarker.createInstance(ap, code, 80.0, NyARSingleDetectMarker.PF_NYARTOOLKIT);
//計算モードの設定
this._ar.setContinueMode(true);
//3dデバイスを準備する
this._device = PrepareD3dDevice(topLevelForm);
this._device.RenderState.ZBufferEnable = true;
this._device.RenderState.Lighting = false;
//カメラProjectionの設定
Matrix tmp = new Matrix();
NyARD3dUtil.toCameraFrustumRH(ap.getPerspectiveProjectionMatrix(),ap.getScreenSize(),1, 10, 10000,ref tmp);
this._device.Transform.Projection = tmp;
// ビュー変換の設定(左手座標系ビュー行列で設定する)
// 0,0,0から、Z+方向を向いて、上方向がY軸
this._device.Transform.View = Matrix.LookAtLH(
new Vector3(0.0f, 0.0f, 0.0f), new Vector3(0.0f, 0.0f, 1.0f), new Vector3(0.0f, 1.0f, 0.0f));
Viewport vp = new Viewport();
vp.X = 0;
vp.Y = 0;
vp.Height = ap.getScreenSize().h;
vp.Width = ap.getScreenSize().w;
vp.MaxZ = 1.0f;
//ビューポート設定
this._device.Viewport = vp;
//カラーキューブの描画インスタンス
this._cube = new ColorCube(this._device, 40);
//背景サーフェイスを作成
this._surface = new NyARD3dSurface(this._device, SCREEN_WIDTH, SCREEN_HEIGHT);
this._is_marker_enable = false;
return true;
}
private void buttonBookDemo_Click(object sender, EventArgs e)
{
if (bookDemo == false)
{
StopOtherApps(this, e);
bookDemo = true;
labelDemoName.Text = "Book";
buttonBookDemo.Text = "Stop Book";
labelDemoInstructions.Enabled = true;
labelDemoInstructions.Text = "Book Demo Instructions:\n\n"
+ "Book \n";
//pictureBoxAlbum.Show();
lblResult.Hide();
//NYAR
//initialize nyar components.
NyARParam ap = new NyARParam();
ap.loadARParamFromFile(AR_CAMERA_FILE);
ap.changeScreenSize(SCREEN_WIDTH, SCREEN_HEIGHT);
_raster = new DsBGRX32Raster(SCREEN_WIDTH, SCREEN_HEIGHT, SCREEN_WIDTH * 32 / 8);
_utils = new NyARD3dUtil();
// For each pattern
NyARCode code1 = new NyARCode(16, 16);
code1.loadARPattFromFile(AR_CODE_FILE1);
_ar1 = new NyARSingleDetectMarker(ap, code1, 80.0);
_ar1.setContinueMode(false);
NyARCode code2 = new NyARCode(16, 16);
code2.loadARPattFromFile(AR_CODE_FILE2);
_ar2 = new NyARSingleDetectMarker(ap, code2, 80.0);
_ar2.setContinueMode(false);
NyARCode code3 = new NyARCode(16, 16);
code3.loadARPattFromFile(AR_CODE_FILE3);
_ar3 = new NyARSingleDetectMarker(ap, code3, 80.0);
_ar3.setContinueMode(false);
NyARCode code4 = new NyARCode(16, 16);
code4.loadARPattFromFile(AR_CODE_FILE4);
_ar4 = new NyARSingleDetectMarker(ap, code4, 80.0);
_ar4.setContinueMode(false);
}
else
{
bookDemo = false;
labelDemoName.Text = "WUW";
buttonBookDemo.Text = "Book";
Cursor = Cursors.Arrow;
labelDemoInstructions.Enabled = false;
labelDemoInstructions.Text = "";
ResetEnvironment();
//pictureBoxAlbum.Hide();
lblResult.Show();
}
}
private void nyar()
{
// - load the image to a bitmap
Bitmap _latestFrameBitmap = (Bitmap)_latestFrame;
// - create a new bitmap with diff. file format. PixelFormat.Format32bppArbg
Bitmap _latestFrameShift = new Bitmap(_latestFrameBitmap.Width, _latestFrameBitmap.Height, PixelFormat.Format32bppArgb);
_latestFrameShift.SetResolution(_latestFrameBitmap.HorizontalResolution, _latestFrameBitmap.VerticalResolution);
// - copy the data from first bitmap to second.
Graphics g = Graphics.FromImage(_latestFrameShift);
g.DrawImage(_latestFrameBitmap, 0, 0);
g.Dispose();
// - change the bitmap into an intptr
Rectangle _latestFrameShiftRect = new Rectangle(0, 0, _latestFrameShift.Width, _latestFrameShift.Height);
BitmapData _latestFrameShiftData = _latestFrameShift.LockBits(_latestFrameShiftRect, ImageLockMode.ReadWrite, _latestFrameShift.PixelFormat);
IntPtr fakeBuffer = _latestFrameShiftData.Scan0;
_latestFrameShift.UnlockBits(_latestFrameShiftData);
// - use the fake buffer
_raster.setBuffer(fakeBuffer);
//Begin to DETECT.
//Try all three.
_ar1.detectMarkerLite(_raster, 110);
_ar2.detectMarkerLite(_raster, 110);
_ar3.detectMarkerLite(_raster, 110);
_ar4.detectMarkerLite(_raster, 110);
NyARSingleDetectMarker[] _arArray = new NyARSingleDetectMarker[4] { _ar1, _ar2, _ar3, _ar4 };
_arFinal = largestNyar(_arArray);
is_marker_enable = _arFinal.detectMarkerLite(_raster, 110);
if (is_marker_enable && _arFinal.getConfidence() > 0.3)
{
labelDemoName.Text = "Pattern #" + largestNyarIndex(_arArray) + "[" + _arFinal.getConfidence().ToString() + "]";
}
else
{
labelDemoName.Text = "No Pattern";
}
//display some feedback.
pictureBoxAlbum.Image = _latestFrameShift;
}
private int largestNyarIndex(NyARSingleDetectMarker[] nyarArray)
{
int maxIndex = 0;
double maxConfidence = 0;
for (int i = 0; i < nyarArray.Length; i++)
{
if (nyarArray[i].getConfidence() > maxConfidence)
{
maxConfidence = nyarArray[i].getConfidence();
maxIndex = i;
}
}
return maxIndex;
}
private NyARSingleDetectMarker largestNyar(NyARSingleDetectMarker[] nyarArray)
{
NyARSingleDetectMarker maxNyar = nyarArray[0];
double maxConfidence = 0;
for (int i = 0; i < nyarArray.Length; i++)
{
if (nyarArray[i].getConfidence() > maxConfidence)
{
maxConfidence = nyarArray[i].getConfidence();
maxNyar = nyarArray[i];
}
}
return maxNyar;
}
public RleDetector(NyARSingleDetectMarker i_parent, NyARIntSize i_size)
: base(i_size)
{
this._parent = i_parent;
}
public RleDetector(NyARSingleDetectMarker i_parent, NyARIntSize i_size) : base(i_size)
{
this._parent = i_parent;
}
public bool InitializeApplication(Form1 topLevelForm)
{
topLevelForm.ClientSize=new Size(SCREEN_WIDTH,SCREEN_HEIGHT);
this._raster = new NyARBitmapRaster(new Bitmap(TEST_IMAGE));
//AR用カメラパラメタファイルをロードして設定
NyARParam ap = NyARParam.createFromARParamFile(new StreamReader(AR_CAMERA_FILE));
ap.changeScreenSize(SCREEN_WIDTH, SCREEN_HEIGHT);
//AR用のパターンコードを読み出し
NyARCode code = NyARCode.createFromARPattFile(new StreamReader(AR_CODE_FILE),16, 16);
//１パターンのみを追跡するクラスを作成
this._ar = NyARSingleDetectMarker.createInstance(ap, code, 80.0,NyARSingleDetectMarker.PF_NYARTOOLKIT);
//計算モードの設定
this._ar.setContinueMode(true);
//3dデバイスを準備する
this._device = PrepareD3dDevice(topLevelForm);
this._device.RenderState.ZBufferEnable = true;
this._device.RenderState.Lighting = false;
//カメラProjectionの設定
Matrix tmp = new Matrix();
NyARD3dUtil.toCameraFrustumRH(ap, 10, 1000, ref tmp);
this._device.Transform.Projection = tmp;
// ビュー変換の設定(左手座標系ビュー行列で設定する)
// 0,0,0から、Z+方向を向いて、上方向がY軸
this._device.Transform.View = Matrix.LookAtLH(
new Vector3(0.0f, 0.0f, 0.0f), new Vector3(0.0f, 0.0f, 1.0f), new Vector3(0.0f, 1.0f, 0.0f));
Viewport vp = new Viewport();
vp.X = 0;
vp.Y = 0;
vp.Height = ap.getScreenSize().h;
vp.Width = ap.getScreenSize().w;
vp.MaxZ = 1.0f;
//ビューポート設定
this._device.Viewport = vp;
//カラーキューブの描画インスタンス
this._cube = new ColorCube(this._device, 40);
//背景サーフェイスを作成
this._surface = new NyARD3dSurface(this._device, SCREEN_WIDTH, SCREEN_HEIGHT);
NyARDoubleMatrix44 nyar_transmat = this.__OnBuffer_nyar_transmat;
//マーカの認識
bool is_marker_enable = this._ar.detectMarkerLite(this._raster, 110);
if (is_marker_enable)
{
//あればMatrixを計算
this._ar.getTransmationMatrix(nyar_transmat);
NyARD3dUtil.toD3dCameraView(nyar_transmat, 1f, ref this._trans_mat);
}
this._is_marker_enable = is_marker_enable;
//サーフェイスへ背景をコピー
this._surface.setRaster(this._raster);
return true;
}
public bool InitializeApplication(Form1 topLevelForm,CaptureDevice i_cap_device)
{
topLevelForm.ClientSize=new Size(SCREEN_WIDTH,SCREEN_HEIGHT);
i_cap_device.SetCaptureListener(this);
i_cap_device.PrepareCapture(SCREEN_WIDTH, SCREEN_HEIGHT, 30);
this._cap = i_cap_device;
//this._raster = new DsRgbRaster(i_cap_device.video_width, i_cap_device.video_height,NyARBufferType.BYTE1D_B8G8R8X8_32);
#region my code
try
{
byte[] bimg = service.getb();
//if(bimg != null)
{
Image img = byteToImage(bimg);
if (img != null)
{
//frm.textBox1.Text = img.ToString();
this._raster = new NyARBitmapRaster((Bitmap)img);
}
}
//else
}
catch (Exception x)
{
//MessageBox.Show(x.ToString());
}
#endregion
NyARParam ap = NyARParam.createFromARParamFile(new StreamReader(AR_CAMERA_FILE));
ap.changeScreenSize(SCREEN_WIDTH, SCREEN_HEIGHT);
NyARCode code = NyARCode.createFromARPattFile(new StreamReader(AR_CODE_FILE),16, 16);
this._ar = NyARSingleDetectMarker.createInstance(ap, code, 80.0, NyARSingleDetectMarker.PF_NYARTOOLKIT);
this._ar.setContinueMode(true);
this._device = PrepareD3dDevice(topLevelForm);
this._device.RenderState.ZBufferEnable = true;
this._device.RenderState.Lighting = false;
Matrix tmp = new Matrix();
NyARD3dUtil.toCameraFrustumRH(ap.getPerspectiveProjectionMatrix(),ap.getScreenSize(),1, 10, 10000,ref tmp);
this._device.Transform.Projection = tmp;
this._device.Transform.View = Matrix.LookAtLH(
new Vector3(0.0f, 0.0f, 0.0f), new Vector3(0.0f, 0.0f, 1.0f), new Vector3(0.0f, 1.0f, 0.0f));
Viewport vp = new Viewport();
vp.X = 0;
vp.Y = 0;
vp.Height = ap.getScreenSize().h;
vp.Width = ap.getScreenSize().w;
vp.MaxZ = 1.0f;
this._device.Viewport = vp;
this._cube = new ColorCube(this._device, 40);
this._surface = new NyARD3dSurface(this._device, SCREEN_WIDTH, SCREEN_HEIGHT);
this._is_marker_enable = false;
return true;
}