/// <summary>
/// Draws Line in the Bitmap
/// </summary>
/// <param name="start">starting vector</param>
/// <param name="end">ending vector</param>
/// <param name="start_color">starting color of starting vector</param>
/// <param name="end_color">ending color of ending vector</param>
public void DrawLine(SLVertex start, SLVertex end)
{
stride = data.Stride;
List <SLVertex> noPointsNeeded = new List <SLVertex>();
CheckAndDrawLine(start, end, ref noPointsNeeded);
}
/// <summary>
/// calculates new point in screen relative to v2
/// </summary>
/// <param name="v1"></param>
/// <param name="v2"></param>
/// <param name="code"></param>
/// <returns>new point in screenspace</returns>
private SLVertex calcPoints(ref SLVertex v1, ref SLVertex v2, int code)
{
float x1 = v1.position.x, y1 = v1.position.y;
float x2 = v2.position.x, y2 = v2.position.y;
if ((code & top) > 0)
{
v1.position.x = x1 + (x2 - x1) * (0 - y1) / (y2 - y1);
v1.position.y = 0;
// achtung nicht verwechseln!
}
else if ((code & bottom) > 0)
{
v1.position.x = x1 + (x2 - x1) * (bmp.Height - 1 - y1) / (y2 - y1);
v1.position.y = bmp.Height - 1;
}
else if ((code & right) > 0)
{
v1.position.y = y1 + (y2 - y1) * (bmp.Width - 1 - x1) / (x2 - x1);
v1.position.x = bmp.Width - 1;
}
else if ((code & left) > 0)
{
v1.position.y = y1 + (y2 - y1) * (0 - x1) / (x2 - x1);
v1.position.x = 0;
}
else
{
v1.position.y = -1;
v1.position.x = -1;
}
return(v1);
}
/// <summary>
/// sets but dosn't create a vertex
/// </summary>
/// <param name="nVertex">new Vertex values</param>
public void Set(SLVertex nVertex)
{
this.position.Set(nVertex.position);
this.normale.Set(nVertex.normale);
this.color.Set(nVertex.color);
this.nColor = color / 255;
this.posInView.Set(nVertex.posInView);
}
/// <summary>
/// Draws an fill in a Polygon counterclockwise
/// </summary>
/// <param name="vec0">first vector</param>
/// <param name="c0">color from vector 0 </param>
/// <param name="vec1">second vector</param>
/// <param name="c1">color from vector 1 </param>
/// <param name="vec2">third and last vector</param>
/// <param name="c2">color4 from vector 2 </param>
public void DrawPolygon(SLVertex vertex0, SLVertex vertex1, SLVertex vertex2)
{
// Draws the line between the 3 vectors and saves the primitves
List <SLVertex> allPrimitves = new List <SLVertex>();
DrawPrimitives(vertex0, vertex1, vertex2, ref allPrimitves);
if (!wireframe) // (allPrimitves.Count < 2)
{
FillInPrimitives(vertex0, vertex1, vertex2, allPrimitves);
}
}
public override void build()
{
#region setUpVertices
int ii = 0;
vertices[ii++] = new SLVertex(vectors[0], front, color);
vertices[ii++] = new SLVertex(vectors[1], front, color);
vertices[ii++] = new SLVertex(vectors[2], front, color);
vertices[ii++] = new SLVertex(vectors[3], front, color);
vertices[ii++] = new SLVertex(vectors[3], left, color);
vertices[ii++] = new SLVertex(vectors[7], left, color);
vertices[ii++] = new SLVertex(vectors[4], left, color);
vertices[ii++] = new SLVertex(vectors[0], left, color);
vertices[ii++] = new SLVertex(vectors[7], back, color);
vertices[ii++] = new SLVertex(vectors[6], back, color);
vertices[ii++] = new SLVertex(vectors[5], back, color);
vertices[ii++] = new SLVertex(vectors[4], back, color);
vertices[ii++] = new SLVertex(vectors[1], right, color);
vertices[ii++] = new SLVertex(vectors[5], right, color);
vertices[ii++] = new SLVertex(vectors[6], right, color);
vertices[ii++] = new SLVertex(vectors[2], right, color);
vertices[ii++] = new SLVertex(vectors[2], top, color);
vertices[ii++] = new SLVertex(vectors[6], top, color);
vertices[ii++] = new SLVertex(vectors[7], top, color);
vertices[ii++] = new SLVertex(vectors[3], top, color);
vertices[ii++] = new SLVertex(vectors[0], bottom, color);
vertices[ii++] = new SLVertex(vectors[4], bottom, color);
vertices[ii++] = new SLVertex(vectors[5], bottom, color);
vertices[ii++] = new SLVertex(vectors[1], bottom, color);
#endregion
#region setUpIndices
int start = 0;
int up = 1;
for (int i = 0; i < 36; i += 6)
{
for (int s = 0; s < 4; s += 3)
{
for (int d = 1; d < 3; d++)
{
indices[i + s + d] = up;
up++;
}
up--;
indices[i + s] = start;
}
start += 4;
up = start + 1;
}
#endregion
}
/// <summary>
/// checks & and draws line if it isn't out of bounds
/// calculates new point if the line is half out of bounds
/// </summary>
/// <param name="vertex0">start point</param>
/// <param name="vertex1">end point</param>
/// <param name="allPrimitves">save primitives</param>
/// <returns>returns new point that isn't out of bounds</returns>
private SLVertex CheckAndDrawLine(SLVertex vertex0, SLVertex vertex1, ref List <SLVertex> allPrimitves)
{
// create new vertecies so that the original vertecies point dont get changed
SLVertex v0 = new SLVertex();
v0.Set(vertex0);
SLVertex v1 = new SLVertex();
v1.Set(vertex1);
SLVertex border = null;
#region checkBoundries
bool f = false;
while (!f)
{
int codeA = set4Bit(v0.position.x, v0.position.y);
int codeB = set4Bit(v1.position.x, v1.position.y);
if ((codeA | codeB) == 0)
{
f = true;
}
if ((codeA & codeB) != 0)
{
return(null);
}
if (codeA > 0 || codeB > 0)
{
border = (codeA > 0) ? calcPoints(ref v0, ref v1, codeA) : calcPoints(ref v1, ref v0, codeB);
}
}
#endregion
if (!phong && !showZ)
{
v0.color = v0.colorToLight(light); v1.color = v1.colorToLight(light);
}
DrawLine(v0, v1, ref allPrimitves);
return(border);
}
/// <summary>
/// draws the outer lines of the polygon
/// </summary>
/// <param name="v0"></param>
/// <param name="v1"></param>
/// <param name="v2"></param>
/// <param name="allPrimitves">saves the point of the outer lines</param>
private void DrawPrimitives(SLVertex v0, SLVertex v1, SLVertex v2, ref List <SLVertex> allPrimitves)
{
SLVertex randV0 = CheckAndDrawLine(v0, v1, ref allPrimitves);
SLVertex randV1 = CheckAndDrawLine(v1, v2, ref allPrimitves);
SLVertex randV2 = CheckAndDrawLine(v2, v0, ref allPrimitves);
#region primitvesBorder
// draws extra line on border if rand is not null
if (randV0 != null && randV1 != null)
{
DrawLine(randV0, randV1, ref allPrimitves);
}
else if (randV1 != null && randV2 != null)
{
DrawLine(randV1, randV2, ref allPrimitves);
}
else if (randV2 != null && randV0 != null)
{
DrawLine(randV2, randV0, ref allPrimitves);
}
#endregion
}
/// <summary>
/// Draws Line in the Bitmap and sets up the Primitives
/// </summary>
/// <param name="startVec">starting vector</param>
/// <param name="endVec">ending vector</param>
/// <param name="start_color">starting color of starting vector</param>
/// <param name="end_color">ending color of ending vector</param>
/// <param name="points">saves the coordinates of the line</param>
/// <param name="colors">saves the colors of the line</param>
private void DrawLine(SLVertex start, SLVertex end, ref List <SLVertex> primitves)
{
#region setup
// color calculations
double distance = 0;
SLVec3f newColor = new SLVec3f();
SLVec3f startC = start.color, endC = end.color;
SLVec3f startVec = start.position, endVec = end.position;
RoundVector(ref startVec);
RoundVector(ref endVec);
// calculates slopes
int dx = (int)(endVec.x - startVec.x);
int dy = (int)(endVec.y - startVec.y);
// steps size for calculation in ptr array
int stepX = 3, stepY = stride;
int stepDX = 1, stepDY = 1;
// positions to know the coordinates of the active position
int posY = (int)startVec.y;
int posX = (int)startVec.x;
float posZ;
float startZ = startVec.z;
float endZ = endVec.z;
// transformed starting coordinates for the ptr array
int activeY = (int)startVec.y * stride;
int activeX = (int)startVec.x * stepX;
// transformed ending coordinates for the ptr array
int lastX = (int)endVec.x * stepX;
int lastY = (int)endVec.y * stepY;
// if the slopes are negative
if (dx < 0)
{
invertValues(ref dx, ref stepX, ref stepDX);
}
if (dy < 0)
{
invertValues(ref dy, ref stepY, ref stepDY);
}
// ___________________________
// distance between start and end vector √ (x1 - x0)^2 + (y1 - y0)^2
double lenght = Math.Sqrt(Math.Pow(endVec.x - startVec.x, 2) + Math.Pow(endVec.y - startVec.y, 2));
#endregion
#region Phong
if (phong)
{
#region phongSetup
SLVec3f newViewSpaceP = new SLVec3f();
SLVec3f startVSP = start.posInView, endVSP = end.posInView;
SLVec3f startNorm = start.normale, endNorm = end.normale;
SLVec3f newNormale = new SLVec3f();
#endregion
unsafe
{
byte *ptr = (byte *)data.Scan0;
if (dx > dy)
{
int dE = (dy << 1); // dy*2 anstatt dx / 2
int dNE = (dy << 1) - (dx << 1); // dy*2 - dx*2
int D = (dy << 1) - dx; // dy*2 - dx
while (activeX != lastX)
{
#region calculationVertex
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
// distance percent between the whole line
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolate vertex
posZ = startZ + ratio * (endZ - startZ);
newNormale = startNorm + ratio * (endNorm - startNorm);
newColor = startC + ratio * (endC - startC);
newViewSpaceP = startVSP + ratio * (endVSP - startVSP);
// save vertex
SLVertex nVertex = new SLVertex(posX, posY, posZ, newNormale, newColor, newViewSpaceP);
primitves.Add(nVertex);
#endregion
if (zB.checkZ(posX, posY, posZ))
{
newColor = nVertex.colorToLight(light);
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
if (D < 0)
{
D += dE;
}
else
{
D += dNE;
activeY += stepY;
posY += stepDY;
}
activeX += stepX;
posX += stepDX;
}
}
else
{
int dE = (dx << 1); // = 2*dx
int dNE = (dx - dy) << 1; // = 2*(dx-dy)
int e = (dx << 1) - dy; // = 2*dx - dy;
while (activeY != lastY)
{
#region calculationVertex
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolate Vertex
newColor = startC + ratio * (endC - startC);
posZ = startZ + ratio * (endZ - startZ);
newNormale = startNorm + ratio * (endNorm - startNorm);
newViewSpaceP = startVSP + ratio * (endVSP - startVSP);
// save vertex
SLVertex nVertex = new SLVertex(posX, posY, posZ, newNormale, newColor, newViewSpaceP);
primitves.Add(nVertex);
#endregion
if (zB.checkZ(posX, posY, posZ))
{
newColor = nVertex.colorToLight(light);
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
activeY += stepY;
posY += stepDY;
if (e < 0)
{
e += dE;
}
else
{
e += dNE;
activeX += stepX;
posX += stepDX;
}
}
}
// set last pixel
if (zB.checkZ(posX, posY, endVec.z))
{
endC = end.colorToLight(light);
ptr[lastX + lastY] = (byte)(endC.z);
ptr[lastX + lastY + 1] = (byte)(endC.y);
ptr[lastX + lastY + 2] = (byte)(endC.x);
}
primitves.Add(new SLVertex(endVec, endNorm, endC, endVSP));
}
}
#endregion
#region zBufferVisulatation
// zBufferVisulatation
else if (showZ)
{
double lengthZ = zB.far - zB.near;
double distanceZ;
startC = new SLVec3f(255, 255, 255);
endC = new SLVec3f();
unsafe
{
byte *ptr = (byte *)data.Scan0;
if (dx > dy)
{
int dE = (dy << 1); // dy*2 anstatt dx / 2
int dNE = (dy << 1) - (dx << 1); // dy*2 - dx*2
int D = (dy << 1) - dx; // dy*2 - dx
while (activeX != lastX)
{
#region calculationZColor
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
// distance percent between the whole line
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolate Z
posZ = startZ + ratio * (endZ - startZ);
distanceZ = posZ - zB.near;
float ratioZ = (float)(distanceZ / lengthZ);
// gradient between near and far
newColor = startC + ratioZ * (endC - startC);
primitves.Add(new SLVertex(posX, posY, posZ, newColor));
#endregion
if (zB.checkZ(posX, posY, posZ))
{
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
if (D < 0)
{
D += dE;
}
else
{
D += dNE;
activeY += stepY;
posY += stepDY;
}
activeX += stepX;
posX += stepDX;
}
}
else
{
int dE = (dx << 1); // = 2*dx
int dNE = (dx - dy) << 1; // = 2*(dx-dy)
int e = (dx << 1) - dy; // = 2*dx - dy;
while (activeY != lastY)
{
#region calculationZColor
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolate Z
posZ = startZ + ratio * (endZ - startZ);
distanceZ = posZ - zB.near;
float ratioZ = (float)(distanceZ / lengthZ);
// gradient between near and far
newColor = startC + ratioZ * (endC - startC);
primitves.Add(new SLVertex(posX, posY, posZ, newColor));
#endregion
if (zB.checkZ(posX, posY, posZ))
{
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
activeY += stepY;
posY += stepDY;
if (e < 0)
{
e += dE;
}
else
{
e += dNE;
activeX += stepX;
posX += stepDX;
}
}
}
// set last pixel
if (zB.checkZ(posX, posY, endVec.z))
{
distanceZ = endVec.z - zB.near;
float ratioZ = (float)(distanceZ / lengthZ);
newColor = startC + ratioZ * (endC - startC);
ptr[lastX + lastY] = (byte)(newColor.z);
ptr[lastX + lastY + 1] = (byte)(newColor.y);
ptr[lastX + lastY + 2] = (byte)(newColor.x);
}
primitves.Add(new SLVertex(endVec, end.normale, newColor));
}
}
#endregion
// ohne phong & one z visualiesierung
else
{
unsafe
{
byte *ptr = (byte *)data.Scan0;
if (dx > dy)
{
int dE = (dy << 1); // dy*2 anstatt dx / 2
int dNE = (dy << 1) - (dx << 1); // dy*2 - dx*2
int D = (dy << 1) - dx; // dy*2 - dx
while (activeX != lastX)
{
#region interpolateColor
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
// distance percent between the whole line
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolation of z axis
posZ = startZ + ratio * (endZ - startZ);
// gradient between start color and end color
newColor = startC + ratio * (endC - startC);
primitves.Add(new SLVertex(posX, posY, posZ, newColor));
#endregion
if (zB.checkZ(posX, posY, posZ))
{
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
if (D < 0)
{
D += dE;
}
else
{
D += dNE;
activeY += stepY;
posY += stepDY;
}
activeX += stepX;
posX += stepDX;
}
}
else
{
int dE = (dx << 1); // = 2*dx
int dNE = (dx - dy) << 1; // = 2*(dx-dy)
int e = (dx << 1) - dy; // = 2*dx - dy;
while (activeY != lastY)
{
#region interpolateColor
// ___________________________
// distance between start and active pixel √ (x1 - x0)^2 + (y1 - y0)^2
distance = Math.Sqrt((Math.Pow(posX - startVec.x, 2) + Math.Pow(posY - startVec.y, 2)));
float ratio = (float)(distance / lenght);
if (ratio > 1)
{
ratio = 1;
}
// interpolate color
newColor = startC + ratio * (endC - startC);
// interpolate z axis
posZ = startZ + ratio * (endZ - startZ);
primitves.Add(new SLVertex(posX, posY, posZ, newColor));
#endregion
if (zB.checkZ(posX, posY, posZ))
{
// set active pixel the rgb (r=x, g=y, b=z)
ptr[activeX + activeY] = (byte)(newColor.z);
ptr[activeX + activeY + 1] = (byte)(newColor.y);
ptr[activeX + activeY + 2] = (byte)(newColor.x);
}
activeY += stepY;
posY += stepDY;
if (e < 0)
{
e += dE;
}
else
{
e += dNE;
activeX += stepX;
posX += stepDX;
}
}
}
// set last pixel
if (zB.checkZ(posX, posY, endVec.z))
{
endC = end.colorToLight(light);
ptr[lastX + lastY] = (byte)(endC.z);
ptr[lastX + lastY + 1] = (byte)(endC.y);
ptr[lastX + lastY + 2] = (byte)(endC.x);
}
primitves.Add(new SLVertex(endVec, end.normale, endC));
}
}
}
/// <summary>
/// Draws line only on one y axis
/// </summary>
/// <param name="x1"> left point</param>
/// <param name="x2"> right point</param>
/// <param name="y"> y axis on wich the line will be drawn</param>
/// <param name="startColor"> color from x1 </param>
/// <param name="endColor"> color from x2 </param>
private void draw1DLine(SLVertex x1, SLVertex x2, int y)
{
#region drawLineSetUp
int stepX = 3, stepY = stride * y, increX = 1;
int activeX = (int)x1.position.x;
int startX = activeX;
float startZ = x1.position.z;
float activeZ = startZ;
float endZ = x2.position.z;
SLVec3f newColor = new SLVec3f();
double distance;
double length = Math.Abs(activeX - x2.position.x);
float zDiffrence = endZ - startZ;
SLVec3f colorDiffrence = x2.color - x1.color;
SLVec3f startColor = x1.color;
SLVec3f endColor = x2.color;
SLVec3f nNormale = new SLVec3f();
SLVertex nVertex = new SLVertex();
int activePosition = (int)(startX * stepX) + stepY;
int endPosition = (int)x2.position.x * stepX + stepY;
#endregion
#region phong
if (phong)
{
#region phongSetup
SLVec3f startNormale = x1.normale, endNormale = x2.normale;
SLVec3f normaleDiffrence = endNormale - startNormale;
nNormale = startNormale;
SLVec3f startVSP = x1.posInView, endVSP = x2.posInView;
SLVec3f posVSDiffrence = endVSP - startVSP;
SLVec3f nViewSpaceP = startVSP;
#endregion
unsafe
{
byte *ptr = (byte *)data.Scan0;
while (activePosition != endPosition)
{
distance = activeX - startX;
float ratio = (float)(distance / length);
// interpolate the z axis
activeZ = startZ + ratio * zDiffrence;
if (zB.checkZ(activeX, y, activeZ))
{
#region calc new vertex color
// interpolate vertecies color, normale and viewspace
newColor = startColor + ratio * colorDiffrence;
nNormale = startNormale + ratio * normaleDiffrence;
nViewSpaceP = startVSP + ratio * posVSDiffrence;
nVertex = new SLVertex(activeX, y, activeZ, nNormale, newColor, nViewSpaceP);
newColor = nVertex.colorToLight(light);
#endregion
ptr[activePosition] = (byte)newColor.z;
ptr[activePosition + 1] = (byte)newColor.y;
ptr[activePosition + 2] = (byte)newColor.x;
}
activePosition += stepX;
activeX += increX;
}
}
}
#endregion
#region showZBuffer
else if (showZ)
{
#region showZSetUp
startColor = new SLVec3f(255, 255, 255);
endColor = new SLVec3f();
double distanceZ;
double lengthZ = zB.far - zB.near;
#endregion
unsafe
{
byte *ptr = (byte *)data.Scan0;
while (activePosition != endPosition)
{
distance = activeX - startX;
float ratio = (float)(distance / length);
// interpolate z
activeZ = startZ + ratio * zDiffrence;
if (zB.checkZ(activeX, y, activeZ))
{
#region colorRelativeToZBuffer
newColor = startColor + ratio * colorDiffrence;
distanceZ = activeZ - zB.near;
float ratioZ = (float)(distanceZ / lengthZ);
// interpolate between near and far
newColor = startColor + ratioZ * (endColor - startColor);
#endregion
ptr[activePosition] = (byte)newColor.z;
ptr[activePosition + 1] = (byte)newColor.y;
ptr[activePosition + 2] = (byte)newColor.x;
}
activePosition += stepX;
activeX += increX;
}
}
}
#endregion
else
{
unsafe
{
byte *ptr = (byte *)data.Scan0;
while (activePosition != endPosition)
{
distance = activeX - startX;
float ratio = (float)(distance / length);
// interpolate z position
activeZ = startZ + ratio * zDiffrence;
if (zB.checkZ(activeX, y, activeZ))
{
// color interpolation
newColor = startColor + ratio * colorDiffrence;
ptr[activePosition] = (byte)newColor.z;
ptr[activePosition + 1] = (byte)newColor.y;
ptr[activePosition + 2] = (byte)newColor.x;
}
activePosition += stepX;
activeX += increX;
}
}
}
}
private void FillInPrimitives(SLVertex v0, SLVertex v1, SLVertex v2, List <SLVertex> allPrimitves)
{
#region values
int minY, maxY;
SLVec3f vec0 = v0.position, vec1 = v1.position, vec2 = v2.position;
SLVec3f c0 = v0.color, c1 = v1.color, c2 = v2.color;
float[] yPoints = { vec0.y, vec1.y, vec2.y };
int anzahlX = 0;
SLVertex x1, x2;
int maxId = 0;
SLVec3f startC = new SLVec3f();
SLVec3f endC = new SLVec3f();
#endregion
#region calculate setup
// calculates the square around the triangle
minY = (int)yPoints.Min();
maxY = (int)Math.Round(yPoints.Max(), 0);
// creates list on the size of the square (boundries)
List <SLVertex>[] allXonY = new List <SLVertex> [maxY + 1 - minY];
List <SLVertex>[] allSortedXonY = new List <SLVertex> [maxY + 1 - minY];
// füllt die Liste auf (ist performance technisch besser)
for (int s = 0; s < allXonY.Length; s++)
{
allXonY[s] = new List <SLVertex>();
}
// fügt alle x auf der gleichen y achse in einer Liste hinzu die der gleiche index hat wie y
for (int i = 0; i < allPrimitves.Count; i++)
{
allXonY[(int)allPrimitves[i].position.y - minY].Add(allPrimitves[i]);
}
#endregion
// goes through every y position
for (int indexY = 0; indexY < allXonY.Length; indexY++)
{
anzahlX = allXonY[indexY].Count;
if (anzahlX == 0)
{
continue;
}
// sort all x on the same y
allSortedXonY[indexY] = allXonY[indexY].OrderBy(v => v.position.x).ToList <SLVertex>();
maxId = anzahlX - 1;
// sets start x(1) and ending x(2)
x1 = allSortedXonY[indexY][0];
x2 = allSortedXonY[indexY][maxId];
if (x1.position.x == x2.position.x)
{
continue;
}
// draws all x on the static y axis
draw1DLine(x1, x2, indexY + minY);
}
}
/// <summary>
/// sets all the vertices and indices of Sphere
/// </summary>
public override void build()
{
float theta, dtheta; // angles around x-axis
float phi, dphi; // angles around z-axis
int i, j; // loop counters
int iv = 0;
// init start values
theta = 0.0f;
dtheta = (float)Math.PI / stacks;
dphi = 2.0f * (float)Math.PI / slices;
#region setUpVertices
// Define vertex position & normals by looping through all stacks
for (i = 0; i <= stacks; ++i)
{
float sin_theta = (float)Math.Sin(theta);
float cos_theta = (float)Math.Cos(theta);
phi = 0.0f;
// Loop through all slices
for (j = 0; j <= slices; ++j)
{
if (j == slices)
{
phi = 0.0f;
}
// is unnecessary
vertices[iv] = new SLVertex();
vertices[iv].setColor(color);
// define first the normal with length 1
vertices[iv].normale.x = sin_theta * (float)Math.Cos(phi);
vertices[iv].normale.y = sin_theta * (float)Math.Sin(phi);
vertices[iv].normale.z = cos_theta;
// set the vertex position w. the scaled normal
vertices[iv].position.x = radius * vertices[iv].normale.x;
vertices[iv].position.y = radius * vertices[iv].normale.y;
vertices[iv].position.z = radius * vertices[iv].normale.z;
// set the texture coords.
//vertices[iv].t.x = 0; // ???
//vertices[iv].t.y = 0; // ???
phi += dphi;
iv++;
}
theta += dtheta;
}
#endregion
#region setUpIndices
// create Index array x
// neighbors
int ii = 0, iV1, iV2;
for (i = 0; i < stacks; ++i)
{
// index of 1st & 2nd vertex of stack
iV1 = i * (slices + 1);
iV2 = iV1 + slices + 1;
for (j = 0; j < slices; ++j)
{ // 1st triangle ccw
indices[ii++] = iV1 + j;
indices[ii++] = iV2 + j;
indices[ii++] = iV2 + j + 1;
// 2nd triangle ccw
indices[ii++] = iV1 + j;
indices[ii++] = iV2 + j + 1;
indices[ii++] = iV1 + j + 1;
}
}
#endregion
}