protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
// 正常情况下INSERT, UPDATE和DELETE语句不返回数据。 当开启count-changes，以上语句返回一行含一个整数值的数据——该语句插入，修改或删除的行数。
if (!builder.ContainsKey("count_changes"))
{
builder["count_changes"] = "1";
}
// 优化SQLite，如果原始字符串里面没有这些参数，就设置这些参数
if (!builder.ContainsKey("Pooling"))
{
builder["Pooling"] = "true";
}
if (!builder.ContainsKey("Cache Size"))
{
builder["Cache Size"] = "50000";
}
// 这两个设置可以让SQLite拥有数十倍的极限性能，但同时又加大了风险，如果系统遭遇突然断电，数据库会出错，而导致系统无法自动恢复
if (!builder.ContainsKey("Synchronous"))
{
builder["Synchronous"] = "Off";
}
if (!builder.ContainsKey("Journal Mode"))
{
builder["Journal Mode"] = "Memory";
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
//// 正常情况下INSERT, UPDATE和DELETE语句不返回数据。 当开启count-changes，以上语句返回一行含一个整数值的数据——该语句插入，修改或删除的行数。
//if (!builder.ContainsKey("count_changes")) builder["count_changes"] = "1";
// 优化SQLite，如果原始字符串里面没有这些参数，就设置这些参数
if (!builder.ContainsKey("Pooling"))
{
builder["Pooling"] = "true";
}
//if (!builder.ContainsKey("Cache Size")) builder["Cache Size"] = "5000";
if (!builder.ContainsKey("Cache Size"))
{
builder["Cache Size"] = (512 * 1024 * 1024 / -1024) + "";
}
// 加大Page Size会导致磁盘IO大大加大，性能反而有所下降
//if (!builder.ContainsKey("Page Size")) builder["Page Size"] = "32768";
// 这两个设置可以让SQLite拥有数十倍的极限性能，但同时又加大了风险，如果系统遭遇突然断电，数据库会出错，而导致系统无法自动恢复
if (!builder.ContainsKey("Synchronous"))
{
builder["Synchronous"] = "Off";
}
// Journal Mode的内存设置太激进了，容易出事，关闭
//if (!builder.ContainsKey("Journal Mode")) builder["Journal Mode"] = "Memory";
// 数据库中一种高效的日志算法，对于非内存数据库而言，磁盘I/O操作是数据库效率的一大瓶颈。
// 在相同的数据量下，采用WAL日志的数据库系统在事务提交时，磁盘写操作只有传统的回滚日志的一半左右，大大提高了数据库磁盘I/O操作的效率，从而提高了数据库的性能。
if (!builder.ContainsKey("Journal Mode"))
{
builder["Journal Mode"] = "WAL";
}
// 绝大多数情况下，都是小型应用，发生数据损坏的几率微乎其微，而多出来的问题让人觉得很烦，所以还是采用内存设置
// 将来可以增加自动恢复数据的功能
//if (!builder.ContainsKey("Journal Mode")) builder["Journal Mode"] = "Memory";
// 自动清理数据
if (builder.ContainsKey("autoVacuum"))
{
AutoVacuum = builder["autoVacuum"].ToBoolean();
builder.Remove("autoVacuum");
}
// 默认超时时间
//if (!builder.ContainsKey("Default Timeout")) builder["Default Timeout"] = 5 + "";
// 繁忙超时
//var busy = Setting.Current.CommandTimeout;
//if (busy > 0)
{
// SQLite内部和.Net驱动都有Busy重试机制，多次重试仍然失败，则会出现dabase is locked。通过加大重试次数，减少高峰期出现locked的几率
// 繁忙超时时间。出现Busy时，SQLite内部会在该超时时间内多次尝试
//if (!builder.ContainsKey("BusyTimeout")) builder["BusyTimeout"] = 50 + "";
// 重试次数。SQLite.Net驱动在遇到Busy时会多次尝试，每次随机等待1~150ms
//if (!builder.ContainsKey("PrepareRetries")) builder["PrepareRetries"] = 10 + "";
}
DAL.WriteLog(builder.ToString());
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
// 关闭底层连接池，使用XCode连接池
if (!builder.ContainsKey(Pooling))
{
builder[Pooling] = "false";
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
if (builder.ContainsKey(Server_Key) && (builder[Server_Key] == "." || builder[Server_Key] == "localhost"))
{
//builder[Server_Key] = "127.0.0.1";
builder[Server_Key] = IPAddress.Loopback.ToString();
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
String file;
if (!builder.TryGetValue("Database", out file)) return;
file = ResolveFile(file);
builder["Database"] = file;
FileName = file;
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
String file;
//if (!builder.TryGetValue(_.DataSource, out file)) return;
// 允许空，当作内存数据库处理
builder.TryGetValue(_.DataSource, out file);
file = OnResolveFile(file);
builder[_.DataSource] = file;
FileName = file;
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
if (!builder.TryGetValue("Database", out var file))
{
return;
}
file = ResolveFile(file);
builder["Database"] = file;
FileName = file;
}
/// <summary>设置连接字符串时允许从中取值或修改，基类用于读取拥有者Owner，子类重写时应调用基类</summary>
/// <param name="builder"></param>
protected virtual void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String value;
if (builder.TryGetAndRemove(_.Owner, out value) && !String.IsNullOrEmpty(value))
{
Owner = value;
}
if (builder.TryGetAndRemove(_.ShowSQL, out value) && !String.IsNullOrEmpty(value))
{
ShowSQL = value.ToBoolean();
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String str = null;
// 获取数据目录，用于反向工程创建数据库
if (builder.TryGetAndRemove("DataPath", out str) && !String.IsNullOrEmpty(str)) DataPath = str;
base.OnSetConnectionString(builder);
if (!builder.ContainsKey(Application_Name))
{
String name = Runtime.IsWeb ? HostingEnvironment.SiteName : AppDomain.CurrentDomain.FriendlyName;
builder[Application_Name] = String.Format("XCode_{0}_{1}", name, ConnName);
}
}
/// <summary>设置连接字符串时允许从中取值或修改，基类用于读取拥有者Owner，子类重写时应调用基类</summary>
/// <param name="builder"></param>
protected virtual void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
if (builder.TryGetAndRemove(_.Owner, out var value) && !String.IsNullOrEmpty(value))
{
Owner = value;
}
if (builder.TryGetAndRemove(_.ShowSQL, out value) && !String.IsNullOrEmpty(value))
{
ShowSQL = value.ToBoolean();
}
if (builder.TryGetAndRemove(_.UserParameter, out value) && !String.IsNullOrEmpty(value))
{
UserParameter = value.ToBoolean();
}
if (builder.TryGetAndRemove(_.Migration, out value) && !String.IsNullOrEmpty(value))
{
Migration = (Migration)Enum.Parse(typeof(Migration), value, true);
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
SqlCeVer = SQLCEVersion.SQLCE40;
if (!String.IsNullOrEmpty(FileName) && File.Exists(FileName))
{
try
{
SqlCeVer = SqlCeHelper.DetermineVersion(FileName);
}
catch (Exception ex)
{
XTrace.WriteException(ex);
SqlCeVer = SQLCEVersion.SQLCE40;
}
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
// 正常情况下INSERT, UPDATE和DELETE语句不返回数据。 当开启count-changes，以上语句返回一行含一个整数值的数据——该语句插入，修改或删除的行数。
if (!builder.ContainsKey("count_changes")) builder["count_changes"] = "1";
// 优化SQLite，如果原始字符串里面没有这些参数，就设置这些参数
if (!builder.ContainsKey("Pooling")) builder["Pooling"] = "true";
if (!builder.ContainsKey("Cache Size")) builder["Cache Size"] = "50000";
// 加大Page Size会导致磁盘IO大大加大，性能反而有所下降
//if (!builder.ContainsKey("Page Size")) builder["Page Size"] = "32768";
// 这两个设置可以让SQLite拥有数十倍的极限性能，但同时又加大了风险，如果系统遭遇突然断电，数据库会出错，而导致系统无法自动恢复
if (!builder.ContainsKey("Synchronous")) builder["Synchronous"] = "Off";
// Journal Mode的内存设置太激进了，容易出事，关闭
//if (!builder.ContainsKey("Journal Mode")) builder["Journal Mode"] = "Memory";
// 数据库中一种高效的日志算法，对于非内存数据库而言，磁盘I/O操作是数据库效率的一大瓶颈。
// 在相同的数据量下，采用WAL日志的数据库系统在事务提交时，磁盘写操作只有传统的回滚日志的一半左右，大大提高了数据库磁盘I/O操作的效率，从而提高了数据库的性能。
if (!builder.ContainsKey("Journal Mode")) builder["Journal Mode"] = "WAL";
// 绝大多数情况下，都是小型应用，发生数据损坏的几率微乎其微，而多出来的问题让人觉得很烦，所以还是采用内存设置
// 将来可以增加自动恢复数据的功能
//if (!builder.ContainsKey("Journal Mode")) builder["Journal Mode"] = "Memory";
// 自动清理数据
if (builder.ContainsKey("autoVacuum"))
{
AutoVacuum = builder["autoVacuum"].ToBoolean();
builder.Remove("autoVacuum");
}
// 默认超时时间
if (!builder.ContainsKey("Default Timeout")) builder["Default Timeout"] = 5 + "";
//var value = "";
//if (builder.TryGetAndRemove("UseLock", out value) && !String.IsNullOrEmpty(value))
//{
// UseLock = value.ToBoolean();
// if (UseLock) DAL.WriteLog("[{0}]使用SQLite文件锁", ConnName);
//}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String str = null;
// 获取OCI目录
if (builder.TryGetAndRemove("DllPath", out str) && !String.IsNullOrEmpty(str))
{
SetDllPath(str);
//else if (!String.IsNullOrEmpty(str = DllPath))
// SetDllPath(str);
}
else
{
if (!String.IsNullOrEmpty(str = DllPath))
{
SetDllPath(str);
}
// 异步设置DLL目录
//ThreadPool.QueueUserWorkItem(ss => SetDllPath(DllPath));
//Thread.Sleep(500);
}
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String str = null;
// 获取OCI目录
if (builder.TryGetAndRemove("DllPath", out str) && !String.IsNullOrEmpty(str))
SetDllPath(str);
//else if (!String.IsNullOrEmpty(str = DllPath))
// SetDllPath(str);
else
{
//if (!String.IsNullOrEmpty(str = DllPath)) SetDllPath(str);
// 异步设置DLL目录
ThreadPool.QueueUserWorkItem(ss => SetDllPath(DllPath));
Thread.Sleep(500);
}
}
/// <summary>设置连接字符串时允许从中取值或修改，基类用于读取拥有者Owner，子类重写时应调用基类</summary>
/// <param name="builder"></param>
protected virtual void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String value;
if (builder.TryGetAndRemove(_.Owner, out value) && !String.IsNullOrEmpty(value)) Owner = value;
if (builder.TryGetAndRemove(_.ShowSQL, out value) && !String.IsNullOrEmpty(value)) ShowSQL = value.ToBoolean();
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
base.OnSetConnectionString(builder);
// 特别处理一下Excel
if (!String.IsNullOrEmpty(FileName))
{
String ext = Path.GetExtension(FileName);
if (ext.EqualIgnoreCase(".xls"))
{
if (!builder.ContainsKey("Extended Properties")) builder["Extended Properties"] = "Excel 8.0";
}
}
}
/// <summary>设置连接字符串时允许从中取值或修改，基类用于读取拥有者Owner，子类重写时应调用基类</summary>
/// <param name="builder"></param>
protected virtual void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String value;
if (builder.TryGetAndRemove(KEY_OWNER, out value) && !String.IsNullOrEmpty(value)) Owner = value;
}
protected override void OnSetConnectionString(XDbConnectionStringBuilder builder)
{
String str = null;
// ��ȡOCIĿ¼
if (builder.TryGetAndRemove("DllPath", out str) && !String.IsNullOrEmpty(str))
{
SetDllPath(str);
//else if (!String.IsNullOrEmpty(str = DllPath))
// SetDllPath(str);
}
else
{
if (!String.IsNullOrEmpty(str = DllPath)) SetDllPath(str);
// �첽����DLLĿ¼
//ThreadPool.QueueUserWorkItem(ss => SetDllPath(DllPath));
//Thread.Sleep(500);
}
}