/// <summary>
/// Removes the given remote XBee device from the network.
/// </summary>
/// <remarks>Notice that this operation does not remove the remote XBee device from the actual XBee
/// network; it just tells the network object that it will no longer contain that device. However,
/// next time a discovery is performed, it could be added again automatically.
///
/// This method will check for a device that matches the 64-bit address of the provided one, if
/// found, that device will be removed from the corresponding list. In case the 64-bit address is
/// not defined, it will use the 16-bit address for DigiMesh and ZigBee devices.</remarks>
/// <param name="remoteDevice">The remote device to be removed from the network.</param>
/// <exception cref="ArgumentNullException">If <c><paramref name="remoteDevice"/> == null</c>.</exception>
public void RemoveRemoteDevice(RemoteXBeeDevice remoteDevice)
{
if (remoteDevice == null)
{
throw new ArgumentNullException("Remote device cannot be null.");
}
RemoteXBeeDevice devInNetwork = null;
// Look in the 64-bit map.
XBee64BitAddress addr64 = remoteDevice.XBee64BitAddr;
if (addr64 != null && !addr64.Equals(XBee64BitAddress.UNKNOWN_ADDRESS))
{
if (remotesBy64BitAddr.TryRemove(addr64, out devInNetwork))
{
return;
}
}
// If not found, look in the 16-bit map.
XBee16BitAddress addr16 = Get16BitAddress(remoteDevice);
if (addr16 != null && !addr16.Equals(XBee16BitAddress.UNKNOWN_ADDRESS))
{
// The preference order is:
// 1.- Look in the 64-bit map
// 2.- Then in the 16-bit map.
// This should be maintained in the 'getDeviceBy16BitAddress' method.
// Look for the 16-bit address in the 64-bit map.
ICollection <RemoteXBeeDevice> devices = remotesBy64BitAddr.Values;
foreach (RemoteXBeeDevice d in devices)
{
XBee16BitAddress a = Get16BitAddress(d);
if (a != null && a.Equals(addr16))
{
remotesBy64BitAddr.TryRemove(d.XBee64BitAddr, out RemoteXBeeDevice r);
return;
}
}
// If not found, look for the 16-bit address in the 16-bit map.
// Remove the device.
if (remotesBy16BitAddr.TryRemove(addr16, out devInNetwork))
{
return;
}
}
// If the device does not contain a valid address log an error.
if ((addr64 == null || addr64.Equals(XBee64BitAddress.UNKNOWN_ADDRESS)) &&
(addr16 == null || addr16.Equals(XBee16BitAddress.UNKNOWN_ADDRESS)))
{
logger.ErrorFormat("{0}Remote device '{1}' cannot be removed: 64-bit and 16-bit addresses must be specified.",
localDevice.ToString(), remoteDevice.ToString());
}
}
/// <summary>
/// Adds the given remote device to the network.
/// </summary>
/// <remarks>Notice that this operation does not join the remote XBee device to the network; it
/// just tells the network that it contains that device. However, the device has only been added
/// to the device list, and may not be physically in the same network.
///
/// The way of adding a device to the network is based on the 64-bit address. If it is not
/// configured:
/// <list type="bullet">
/// <item><description>For 802.15.4 and ZigBee devices, it will use the 16-bit address.</description></item>
/// <item><description>For the rest will return <c>true</c> as the result of the addition.</description></item>
/// </list></remarks>
/// <param name="remoteDevice">The remote device to be added to the network.</param>
/// <returns>The remote XBee Device instance in the network, <c>null</c> if the device could not be
/// successfully added.</returns>
/// <exception cref="ArgumentNullException">If <c><paramref name="remoteDevice"/> == null</c>.</exception>
public RemoteXBeeDevice AddRemoteDevice(RemoteXBeeDevice remoteDevice)
{
if (remoteDevice == null)
{
throw new ArgumentNullException("Remote device cannot be null.");
}
logger.DebugFormat("{0}Adding device '{1}' to network.", localDevice.ToString(), remoteDevice.ToString());
RemoteXBeeDevice devInNetwork = null;
XBee64BitAddress addr64 = remoteDevice.XBee64BitAddr;
XBee16BitAddress addr16 = Get16BitAddress(remoteDevice);
// Check if the device has 64-bit address.
if (addr64 != null && !addr64.Equals(XBee64BitAddress.UNKNOWN_ADDRESS))
{
// The device has 64-bit address, so look in the 64-bit map.
if (remotesBy64BitAddr.TryGetValue(addr64, out devInNetwork))
{
// The device exists in the 64-bit map, so update the reference and return it.
logger.DebugFormat("{0}Existing device '{1}' in network.", localDevice.ToString(), devInNetwork.ToString());
devInNetwork.UpdateDeviceDataFrom(remoteDevice);
return(devInNetwork);
}
else
{
// The device does not exist in the 64-bit map, so check its 16-bit address.
if (addr16 != null && !addr16.Equals(XBee16BitAddress.UNKNOWN_ADDRESS))
{
// The device has 16-bit address, so look in the 16-bit map.
if (remotesBy16BitAddr.TryGetValue(addr16, out devInNetwork))
{
// The device exists in the 16-bit map, so remove it and add it to the 64-bit map.
logger.DebugFormat("{0}Existing device '{1}' in network.", localDevice.ToString(), devInNetwork.ToString());
remotesBy16BitAddr.TryRemove(addr16, out devInNetwork);
devInNetwork.UpdateDeviceDataFrom(remoteDevice);
remotesBy64BitAddr.AddOrUpdate(addr64, devInNetwork, (k, v) => devInNetwork);
return(devInNetwork);
}
else
{
// The device does not exist in the 16-bit map, so add it to the 64-bit map.
remotesBy64BitAddr.AddOrUpdate(addr64, remoteDevice, (k, v) => remoteDevice);
return(remoteDevice);
}
}
else
{
// The device has not 16-bit address, so add it to the 64-bit map.
remotesBy64BitAddr.AddOrUpdate(addr64, remoteDevice, (k, v) => remoteDevice);
return(remoteDevice);
}
}
}
// If the device has not 64-bit address, check if it has 16-bit address.
if (addr16 != null && !addr16.Equals(XBee16BitAddress.UNKNOWN_ADDRESS))
{
// The device has 16-bit address, so look in the 64-bit map.
ICollection <RemoteXBeeDevice> devices = remotesBy64BitAddr.Values;
foreach (RemoteXBeeDevice d in devices)
{
XBee16BitAddress a = Get16BitAddress(d);
if (a != null && a.Equals(addr16))
{
devInNetwork = d;
break;
}
}
// Check if the device exists in the 64-bit map.
if (devInNetwork != null)
{
// The device exists in the 64-bit map, so update the reference and return it.
logger.DebugFormat("{0}Existing device '{1}' in network.", localDevice.ToString(), devInNetwork.ToString());
devInNetwork.UpdateDeviceDataFrom(remoteDevice);
return(devInNetwork);
}
else
{
// The device does not exist in the 64-bit map, so look in the 16-bit map.
if (remotesBy16BitAddr.TryGetValue(addr16, out devInNetwork))
{
// The device exists in the 16-bit map, so update the reference and return it.
logger.DebugFormat("{0}Existing device '{1}' in network.", localDevice.ToString(), devInNetwork.ToString());
devInNetwork.UpdateDeviceDataFrom(remoteDevice);
return(devInNetwork);
}
else
{
// The device does not exist in the 16-bit map, so add it.
remotesBy16BitAddr.AddOrUpdate(addr16, remoteDevice, (k, v) => remoteDevice);
return(remoteDevice);
}
}
}
// If the device does not contain a valid address, return null.
logger.ErrorFormat("{0}Remote device '{1}' cannot be added: 64-bit and 16-bit addresses must be specified.",
localDevice.ToString(), remoteDevice.ToString());
return(null);
}
