private static void TessellateShapeLibTess(Shape vectorShape, Color color, List <Geometry> geoms, TessellationOptions tessellationOptions)
{
UnityEngine.Profiling.Profiler.BeginSample("LibTess");
var tess = new Tess();
var angle = 45.0f * Mathf.Deg2Rad;
var mat = Matrix2D.Rotate(angle);
var invMat = Matrix2D.Rotate(-angle);
foreach (var c in vectorShape.Contours)
{
var contour = new List <Vector2>(100);
foreach (var v in VectorUtils.TraceShape(c, vectorShape.PathProps.Stroke, tessellationOptions))
{
contour.Add(mat.MultiplyPoint(v));
}
tess.AddContour(contour.Select(v => new ContourVertex()
{
Position = new Vec3()
{
X = v.x, Y = v.y
}
}).ToArray(), ContourOrientation.Original);
}
var windingRule = (vectorShape.Fill.Mode == FillMode.OddEven) ? WindingRule.EvenOdd : WindingRule.NonZero;
try
{
tess.Tessellate(windingRule, ElementType.Polygons, 3);
}
catch (System.Exception)
{
Debug.LogWarning("Shape tessellation failed, skipping...");
UnityEngine.Profiling.Profiler.EndSample();
return;
}
var indices = tess.Elements.Select(i => (UInt16)i);
var vertices = tess.Vertices.Select(v => invMat.MultiplyPoint(new Vector2(v.Position.X, v.Position.Y)));
if (indices.Count() > 0)
{
geoms.Add(new Geometry()
{
Vertices = vertices.ToArray(), Indices = indices.ToArray(), Color = color, Fill = vectorShape.Fill, FillTransform = vectorShape.FillTransform
});
}
UnityEngine.Profiling.Profiler.EndSample();
}
static void GenerateTip(BezierSegment segment, bool atStart, float t, PathEnding ending, float halfThickness, TessellationOptions tessellateOptions, List <Vector2> verts, List <UInt16> inds)
{
// The tip includes the vertices at the end itself
Vector2 tan, nrm;
var pos = VectorUtils.EvalFull(segment, t, out tan, out nrm);
int indexStart = verts.Count;
switch (ending)
{
case PathEnding.Chop:
if (atStart)
{
verts.Add(pos + nrm * halfThickness);
verts.Add(pos - nrm * halfThickness);
}
else
{
// Not much, path segments are always expected to be generated perpendicular to the path
// at the segment point location, so we don't have to do anything for the ending
}
break;
case PathEnding.Square:
if (atStart)
{
verts.Add(pos + nrm * halfThickness - tan * halfThickness);
verts.Add(pos - nrm * halfThickness - tan * halfThickness);
verts.Add(pos + nrm * halfThickness);
verts.Add(pos - nrm * halfThickness);
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 3));
inds.Add((UInt16)(indexStart + 1));
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 3));
}
else
{
// Relying on the last two vertices, and just adding two of our own here
verts.Add(pos + nrm * halfThickness + tan * halfThickness);
verts.Add(pos - nrm * halfThickness + tan * halfThickness);
inds.Add((UInt16)(indexStart + 0 - 2));
inds.Add((UInt16)(indexStart + 3 - 2));
inds.Add((UInt16)(indexStart + 1 - 2));
inds.Add((UInt16)(indexStart + 0 - 2));
inds.Add((UInt16)(indexStart + 2 - 2));
inds.Add((UInt16)(indexStart + 3 - 2));
}
break;
case PathEnding.Round:
float arcSign = atStart ? -1 : 1;
int arcSegments = CalculateArcSteps(halfThickness, 0, Mathf.PI, tessellateOptions);
for (int i = 1; i < arcSegments; i++)
{
float angle = Mathf.PI * (i / (float)arcSegments);
verts.Add(pos + Matrix2D.Rotate(angle) * nrm * halfThickness * arcSign);
}
if (atStart)
{
// Note how we maintain the last two vertices being setup for connection by the rest of the path vertices
int indexTipStart = verts.Count;
verts.Add(pos + nrm * halfThickness);
verts.Add(pos - nrm * halfThickness);
for (int i = 1; i < arcSegments; i++)
{
inds.Add((UInt16)(indexTipStart + 1));
inds.Add((UInt16)(indexStart + i - 1));
inds.Add((UInt16)(indexStart + i));
}
}
else
{
inds.Add((UInt16)(indexStart - 1));
inds.Add((UInt16)(indexStart - 2));
inds.Add((UInt16)(indexStart + 0));
for (int i = 1; i < arcSegments - 1; i++)
{
inds.Add((UInt16)(indexStart - 1));
inds.Add((UInt16)(indexStart + i - 1));
inds.Add((UInt16)(indexStart + i));
}
}
break;
default:
System.Diagnostics.Debug.Assert(false); // Joining has its own function
break;
}
}
static void GenerateJoining(JoiningInfo joinInfo, PathCorner corner, float halfThickness, float tippedCornerLimit, TessellationOptions tessellateOptions, List <Vector2> verts, List <UInt16> inds)
{
// The joining generates the vertices at both ends as well as the joining itself
if (verts.Count == 0)
{
// Starting a path with a joining (meaning a loop)
verts.Add(joinInfo.RoundPosThickness ? joinInfo.PosThicknessEnd : joinInfo.InnerCornerVertex);
verts.Add(joinInfo.RoundPosThickness ? joinInfo.InnerCornerVertex : joinInfo.NegThicknessEnd);
}
System.Diagnostics.Debug.Assert(verts.Count >= 2);
int indexStart = verts.Count - 2; // Using the last two vertices
// Convert a tipped corner to a beveled one if tippedCornerLimit ratio is reached
if (corner == PathCorner.Tipped && tippedCornerLimit >= 1.0f)
{
var theta = Vector2.Angle(-joinInfo.TanAtEnd, joinInfo.TanAtStart) * Mathf.Deg2Rad;
var ratio = 1.0f / Mathf.Sin(theta / 2.0f);
if (ratio > tippedCornerLimit)
{
corner = PathCorner.Beveled;
}
}
if (joinInfo.SimpleJoin)
{
// TODO
}
else if (corner == PathCorner.Tipped)
{
verts.Add(joinInfo.PosThicknessClosingPoint);
verts.Add(joinInfo.NegThicknessClosingPoint);
verts.Add(joinInfo.RoundPosThickness ? joinInfo.PosThicknessStart : joinInfo.InnerCornerVertex);
verts.Add(joinInfo.RoundPosThickness ? joinInfo.InnerCornerVertex : joinInfo.NegThicknessStart);
// Ending to tip
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 3));
inds.Add((UInt16)(indexStart + 1));
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 3));
// Tip to starting
inds.Add((UInt16)(indexStart + 4));
inds.Add((UInt16)(indexStart + 3));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 4));
inds.Add((UInt16)(indexStart + 5));
inds.Add((UInt16)(indexStart + 3));
return;
}
else if (corner == PathCorner.Beveled)
{
verts.Add(joinInfo.RoundPosThickness ? joinInfo.PosThicknessEnd : joinInfo.InnerCornerVertex); // 2
verts.Add(joinInfo.RoundPosThickness ? joinInfo.InnerCornerVertex : joinInfo.NegThicknessEnd); // 3
verts.Add(joinInfo.RoundPosThickness ? joinInfo.PosThicknessStart : joinInfo.InnerCornerVertex); // 4
verts.Add(joinInfo.RoundPosThickness ? joinInfo.InnerCornerVertex : joinInfo.NegThicknessStart); // 5
// Ending to tip
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 1));
inds.Add((UInt16)(indexStart + 1));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 3));
// Bevel
if (joinInfo.RoundPosThickness)
{
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 4));
inds.Add((UInt16)(indexStart + 3));
}
else
{
inds.Add((UInt16)(indexStart + 3));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + 5));
}
return;
}
if (corner == PathCorner.Round)
{
float sweepAngle = Mathf.Acos(Vector2.Dot(joinInfo.NormAtEnd, joinInfo.NormAtStart));
bool flipArc = false;
if (!PointOnTheLeftOfLine(Vector2.zero, joinInfo.NormAtEnd, joinInfo.NormAtStart))
{
sweepAngle = -sweepAngle;
flipArc = true;
}
UInt16 innerCornerVertexIndex = (UInt16)verts.Count;
verts.Add(joinInfo.InnerCornerVertex);
int arcSegments = CalculateArcSteps(halfThickness, 0, sweepAngle, tessellateOptions);
for (int i = 0; i <= arcSegments; i++)
{
float angle = sweepAngle * (i / (float)arcSegments);
Vector2 nrm = Matrix2D.Rotate(angle) * joinInfo.NormAtEnd;
if (flipArc)
{
nrm = -nrm;
}
verts.Add(nrm * halfThickness + joinInfo.JoinPos);
if (i == 0)
{
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 3));
inds.Add((UInt16)(indexStart + (joinInfo.RoundPosThickness ? 2 : 1)));
inds.Add((UInt16)(indexStart + 0));
inds.Add((UInt16)(indexStart + 2));
inds.Add((UInt16)(indexStart + (joinInfo.RoundPosThickness ? 1 : 3)));
}
else
{
if (joinInfo.RoundPosThickness)
{
inds.Add((UInt16)(indexStart + i + (flipArc ? 3 : 2)));
inds.Add((UInt16)(indexStart + i + (flipArc ? 2 : 3)));
inds.Add(innerCornerVertexIndex);
}
else
{
inds.Add((UInt16)(indexStart + i + (flipArc ? 3 : 2)));
inds.Add((UInt16)(indexStart + i + (flipArc ? 2 : 3)));
inds.Add(innerCornerVertexIndex);
}
}
}
// Manually add the last segment, maintain the expected vertex positioning
int endingVerticesIndex = verts.Count;
if (joinInfo.RoundPosThickness)
{
verts.Add(joinInfo.PosThicknessStart);
verts.Add(joinInfo.InnerCornerVertex);
}
else
{
verts.Add(joinInfo.InnerCornerVertex);
verts.Add(joinInfo.NegThicknessStart);
}
inds.Add((UInt16)(endingVerticesIndex - 1));
inds.Add((UInt16)(endingVerticesIndex + 0));
inds.Add(innerCornerVertexIndex);
}
}