public void DoAppStartup()
{
//m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
// m_PathMachines = m_apppath + "\\Machines";
// m_PathProfiles = m_apppath + "\\Profiles";
m_PathMachines = "." + m_pathsep + "Machines";
m_PathProfiles = "." + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
// load the current application configuration
/*
* if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname))
* {
* m_appconfig.CreateDefault();
* m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname);
* }
*/
if (!m_appconfig.Load("." + m_pathsep + m_appconfigname))
{
m_appconfig.CreateDefault();
m_appconfig.Save("." + m_pathsep + m_appconfigname);
}
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
SetupDriver();
}
public void DoAppStartup()
{
m_dispmgr = DisplayManager.Instance();// initialze the displays
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
//SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
//load the license keys
LoadLicenseKeys();
//look for plug-ins and validate licensing
ScanForPlugins();
// validate those loaded plugins against license keys
CheckLicensing();
// initialize the plugins, the main form will send a secondary init after the main app gui is created
PerformPluginCommand("InitCommand", true);
m_sc = new ServerContact();
m_sc.ServerContactEvenet += new ServerContact.Servercontacted(m_sc_ServerContactEvent);
m_sc.UpdateRegInfo();
m_undoer.RegisterCallback();
}
public void DoAppStartup()
{
m_dispmgr = DisplayManager.Instance();// initialze the displays
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
else
{
m_buildparms.CreateDefault();
m_buildparms.Load(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
//SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
//load the license keys
LoadLicenseKeys();
//look for plug-ins and validate licensing
ScanForPlugins();
//look for 'lite' plugins
ScanForPluginsLite();
// validate those loaded plugins against license keys
CheckLicensing();
// initialize the plugins, the main form will send a secondary init after the main app gui is created
PerformPluginCommand("InitCommand", true);
m_sc = new ServerContact();
m_sc.ServerContactEvenet += new ServerContact.Servercontacted(m_sc_ServerContactEvent);
//contacting Server twise?? commenting this out for now
//m_sc.UpdateRegInfo();
m_undoer.RegisterCallback();
// pack all 2d gl images
//m_2d_graphics.GenereteUserTexture();
//load Rsource files
//this is not good way to load resource files. but the problem is visual studio cant generate auto-generation code for names with dot "."
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
if (UVDLPApp.Instance().m_appconfig.m_Selected_Language == "es")
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.es", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
else if (UVDLPApp.Instance().m_appconfig.m_Selected_Language == "en")
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
else
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
}
public void DoAppStartup()
{
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
ScanForPlugins(); // look for plug-ins
}