static string PerformBulkVerify()
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
// Create an array of applications.
var request = RequestFactory.CreateBulkVerifyRequest(new VerificationType[]
{
RequestFactory.CreateVerification(1, "C2P5P4UBHP", "Nicholas", "Koke", new DateTime(1990, 07, 02)),
RequestFactory.CreateVerification(2, "QS5Q8XWSUJ", "Annie", "Angle", new DateTime(1981, 09, 02)),
RequestFactory.CreateVerification(3, "9AKTUJMMAZ", "Lucy", "Smithcd", new DateTime(1985, 03, 03)),
RequestFactory.CreateVerification(4, "BJRVU7U59N", "Nick", "Smithdd", new DateTime(1990, 07, 14)),
RequestFactory.CreateVerification(5, "VL8CYKH3ND", "Adam", "Smithed", new DateTime(1977, 09, 07)),
RequestFactory.CreateVerification(6, "6N69KBFUDZ", "Paul", "Smithfd", new DateTime(1982, 12, 06)),
RequestFactory.CreateVerification(7, "N7UEE7FWKV", "Lisa", "Smithgd", new DateTime(1981, 02, 19)),
RequestFactory.CreateVerification(8, "A88H9D64CS", "Anne", "Smithhd", new DateTime(1981, 09, 22)),
RequestFactory.CreateVerification(9, "GBYDD3ZLVN", "Mary", "Smithid", new DateTime(1991, 04, 26))
});
// or use this to create a large request.
//var request = RequestFactory.CreateBulkVerifyRequest(Get500());
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
BulkVerifyUSIResponse response;
try
{
response = client.BulkVerifyUSI(request);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("BulkVerifyUSI returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
var responseStrings = response.BulkVerifyUSIResponse1.VerificationResponses.Select(DecodeBulkVerifyResponse);
string linebreak = String.Format("{0}{0}", Environment.NewLine);
string messages = String.Join(linebreak, responseStrings);
result = messages;
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
return(result);
}
static string PerformBulkUpload()
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
// Create an array of applications.
var request = RequestFactory.CreateBulkUploadRequest(new ApplicationType[]
{
// 09xxxxxxxx is a valid but non-existent phone number. http://australia.gov.au/about-australia/our-country/telephone-country-and-area-codes
// [email protected] is a registered but unused email address. Gmail ignores a plus sign and anything following it.
RequestFactory.CreateApplication("Johnny", "Smithy", new DateTime(1980, 01, 02), PersonalDetailsTypeGender.M, "*****@*****.**", "0900000004", "5 Johnny Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.BirthCert()),
RequestFactory.CreateApplication("Lucy", "Kockhe", new DateTime(1985, 03, 02), PersonalDetailsTypeGender.F, "*****@*****.**", "0900000004", "5 Luce Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.Citizenship()),
RequestFactory.CreateApplication("Nichloas", "Koke", new DateTime(1990, 07, 02), PersonalDetailsTypeGender.M, "*****@*****.**", "0900000004", "5 Nice Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.Descent()),
RequestFactory.CreateApplication("Bobby", "Lashley", new DateTime(1977, 09, 02), PersonalDetailsTypeGender.M, "*****@*****.**", "0900000004", "5 France Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.DriversLicence()),
RequestFactory.CreateApplication("Clooney", "Amal", new DateTime(1981, 02, 02), PersonalDetailsTypeGender.F, "*****@*****.**", "0900000004", "5 Liz Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.Medicare("Lisa Smith7f")),
RequestFactory.CreateApplication("Greg", "Clooney", new DateTime(1981, 09, 02), PersonalDetailsTypeGender.F, "*****@*****.**", "0900000004", "5 Ae Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.Passport()),
RequestFactory.CreateApplication("Tom", "Cruise", new DateTime(1991, 04, 02), PersonalDetailsTypeGender.F, "*****@*****.**", "0900000004", "5 May Street", "4013", StateListType.QLD, "NORTHGATE", RequestFactory.Visa())
});
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
// Make the USI service call.
BulkUploadResponse response;
try
{
response = client.BulkUpload(request);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("BulkUpload returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
result = String.Format("Succeeded with receipt number {0}", response.BulkUploadResponse1.ReceiptNumber);
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
return(result);
}
static string PerformBulkUploadRetrieve(string receiptNumber)
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
// Create a BulkUploadRetrieveRequest using the supplied receipt number.
var request = new BulkUploadRetrieveType()
{
ReceiptNumber = receiptNumber
};
var wrappedRequest = new BulkUploadRetrieveRequest(request);
// Make the USI service call.
BulkUploadRetrieveResponse response;
try
{
response = client.BulkUploadRetrieve(wrappedRequest);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("BulkUploadRetrieve returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
// Decode the response messages and display.
var appResponseStrings = response.BulkUploadRetrieveResponse1.Applications.Select(DecodeBulkUploadRetrievalResponse);
string linebreak = String.Format("{0}{0}", Environment.NewLine);
string messages = String.Join(linebreak, appResponseStrings);
result = messages;
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
return(result);
}
private static string PerformCreateUsi()
{
IUSIService client = null;
// Create an application.
// See explanation at PerformBulkUpload, above.
var createRequest = RequestFactory.CreateUSIRequest(RequestFactory.CreateApplication(
"Janeee", "Smithhh", new DateTime(1980, 01, 06), PersonalDetailsTypeGender.F, "*****@*****.**", "0900000006",
"6 James Street", "2601", StateListType.ACT, "Canberra", RequestFactory.BirthCert()));
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
// Make the USI service call.
CreateUSIResponse createResponse;
try
{
createResponse = client.CreateUSI(createRequest);
}
catch (FaultException <ErrorInfo> ex)
{
Console.WriteLine("CreateUSI returned a FaultException");
Console.WriteLine("Detail: {0}", ex.Detail.Message);
return(null);
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
// Note: if the response is "MatchFound", it means the application was rejected based on being a duplicate (try changing the personal details above)
Console.WriteLine("Application submitted with result: {0} Usi: {1}", createResponse.CreateUSIResponse1.Application.Result, createResponse.CreateUSIResponse1.Application.USI);
// Write out any errors that may have occurred during the request.
if (createResponse.CreateUSIResponse1.Application.Errors != null && createResponse.CreateUSIResponse1.Application.Errors.Length > 0)
{
Console.WriteLine(string.Join(Environment.NewLine, createResponse.CreateUSIResponse1.Application.Errors.Select(e => e.Message)));
}
return(createResponse.CreateUSIResponse1.Application.USI);
}
private static string GetNonDvsDocumentTypes()
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
//create a request to get nonDvsDocumentTypes
var request = RequestFactory.CreateGetNonDvsDocumentRequest("0002");
GetNonDvsDocumentTypesResponse response;
try
{
// Open a channel to the USI service.
response = ServiceChannel.OpenWithM2M().GetNonDvsDocumentTypes(request);
}
catch (FaultException <ErrorInfo> ex)
{
sb.Append("Get Non Dvs Documents returned a FaultException").AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
var responseStrings = response.GetNonDvsDocumentTypesResponse1.NonDvsDocumentTypes;
Console.WriteLine("The following non dvs document types were returned;" + Environment.NewLine);
foreach (var nonDvsDocumentTypeType in responseStrings)
{
sb.AppendLine(string.Format("Id:{0} Type:{1} Sort Order:{2}", nonDvsDocumentTypeType.Id, nonDvsDocumentTypeType.DocumentType, nonDvsDocumentTypeType.SortOrder));
}
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
result = sb.ToString();
return(result);
}
private static string UpdateContactDetails()
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
Console.WriteLine("Please enter a USI to update (you must have permission):");
string usi = Console.ReadLine();
if (string.IsNullOrEmpty(usi))
{
result = "Could not read the USI";
return(result);
}
usi = usi.Trim();
if (usi.Length != 10)
{
result = "USI should be 10 characters long";
return(result);
}
//create a request to get nonDvsDocumentTypes
var request = RequestFactory.CreateUpdateContactDetailsRequest("0002", usi);
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
UpdateUSIContactDetailsResponse response;
try
{
response = client.UpdateUSIContactDetails(request);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("Get Non Dvs Documents returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
if (response.UpdateUSIContactDetailsResponse1.Result == UpdateUSIContactDetailsResponseTypeResult.Failure)
{
var message = " " + String.Join(". ", response.UpdateUSIContactDetailsResponse1.Errors.Select(e => e.Message));
Console.WriteLine(string.Format("Update contact details Failed. Reason: {0}", message));
return(message.ToString());
}
Console.WriteLine("Successfully updated contact details");
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
return(result);
}
static string PerformCreateAndVerifyUSI()
{
IUSIService client = null;
string result = null;
StringBuilder sb = new StringBuilder();
try
{
// Create an application.
// See explanation at PerformBulkUpload, above.
var createRequest = RequestFactory.CreateUSIRequest(RequestFactory.CreateApplication(
"App", "Rohas", new DateTime(1977, 06, 06), PersonalDetailsTypeGender.F, "*****@*****.**", "0400000013",
"62 Butter Street", "2600", StateListType.ACT, "Canberra", RequestFactory.BirthCert()));
// Open a channel to USI service.
client = ServiceChannel.OpenWithM2M();
// Make the USI service call.
CreateUSIResponse createResponse;
try
{
createResponse = client.CreateUSI(createRequest);
}
catch (FaultException <ErrorInfo[]> ex)
{
sb.AppendLine("CreateUSI returned a FaultException");
sb.AppendLine(string.Format("Detail: {0} {1}Code: {2}", ex.Detail.First().Message, Environment.NewLine, ex.Detail.First().Code));
result = sb.ToString();
return(result);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("CreateUSI returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
// Note: if the response is "MatchFound", it means the application was rejected based on being a duplicate (try changing the personal details above)
Console.WriteLine("Application submitted with result: {0}", createResponse.CreateUSIResponse1.Application.Result);
// Write out any errors that may have occurred during the request.
if (createResponse.CreateUSIResponse1.Application.Errors != null && createResponse.CreateUSIResponse1.Application.Errors.Length > 0)
{
Console.WriteLine(string.Join(Environment.NewLine, createResponse.CreateUSIResponse1.Application.Errors.Select(e => e.Message)));
}
if (createResponse.CreateUSIResponse1.Application.Result != ApplicationResponseTypeResult.Failure)
{
// Create a VerifyUSIRequest to verify the previous call.
var verifyRequest = new VerifyUSIType
{
OrgCode = createRequest.CreateUSI.OrgCode,
USI = createResponse.CreateUSIResponse1.Application.USI,
Items = createRequest.CreateUSI.Application.PersonalDetails.Items,
ItemsElementName = createRequest.CreateUSI.Application.PersonalDetails.ItemsElementName.Select(itemsChoice => Translate(itemsChoice)).ToArray(),
DateOfBirth = createRequest.CreateUSI.Application.PersonalDetails.DateOfBirth
};
var wrappedVerifyRequest = new VerifyUSIRequest(verifyRequest);
// Make the USI service call.
VerifyUSIResponse verifyResponse;
try
{
verifyResponse = client.VerifyUSI(wrappedVerifyRequest);
}
catch (FaultException <ErrorInfo> ex)
{
sb.AppendLine("VerifyUSIResponse returned a FaultException");
sb.AppendLine(string.Format("Detail: {0}", ex.Detail.Message));
result = sb.ToString();
return(result);
}
result = string.Format("USI {0} verified with status {1}", verifyRequest.USI, verifyResponse.VerifyUSIResponse1.USIStatus.ToString());
}
else
{
result = "Cannot make Verify call for an unsuccessful USI creation.";
}
}
finally
{
if (client != null)
{
((ICommunicationObject)client).Close();
}
ServiceChannel.Close();
}
return(result);
}