protected void CheckDefaultSharedParameters()
{
bool done = true;
done &= SharedParameterUtils.AddSharedParameter(doc, "ТеррНИИ_Идентификатор отделки пола",
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
done &= SharedParameterUtils.AddSharedParameter(doc, "ТеррНИИ_Идентификатор потолка",
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
done &= SharedParameterUtils.AddSharedParameter(doc, "ТеррНИИ_Номер помещения",
new BuiltInCategory[] { BuiltInCategory.OST_Floors, BuiltInCategory.OST_Ceilings }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
done &= SharedParameterUtils.AddSharedParameter(doc, "ТеррНИИ_Номера всех помещений",
new BuiltInCategory[] { BuiltInCategory.OST_Floors, BuiltInCategory.OST_Ceilings }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS, isIntance: false);
}
public static bool MirroredIndicator(FamilyInstance el)
{
Document doc = el.Document;
string paramName = "ТеррНИИ_Элемент отзеркален";
int value = el.Mirrored ? 1 : 0;
using (Transaction tr = new Transaction(doc, "Индикатор отзеркаливания"))
{
tr.Start();
SharedParameterUtils.AddSharedParameter(doc, paramName,
new BuiltInCategory[] { (BuiltInCategory)el.Category.Id.IntegerValue }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
el.LookupParameter(paramName).Set(value);
tr.Commit();
}
return(el.Mirrored);
}
protected bool CheckDefaultSharedParameters()
{
bool done = true;
using (Transaction tr = new Transaction(doc, "Добавление общих параметров"))
{
tr.Start();
//Проверяем наличие необходимых параметров в проекте
done &= SharedParameterUtils.AddSharedParameter(doc, spaceNumberParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_DuctTerminal, BuiltInCategory.OST_MechanicalEquipment }, BuiltInParameterGroup.PG_IDENTITY_DATA);
done &= SharedParameterUtils.AddSharedParameter(doc, exhaustSystemParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_MEPSpaces }, BuiltInParameterGroup.PG_MECHANICAL_AIRFLOW);
done &= SharedParameterUtils.AddSharedParameter(doc, supplySystemParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_MEPSpaces }, BuiltInParameterGroup.PG_MECHANICAL_AIRFLOW);
done &= SharedParameterUtils.AddSharedParameter(doc, spaceTemperatureParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_MEPSpaces }, BuiltInParameterGroup.PG_ENERGY_ANALYSIS);
done &= SharedParameterUtils.AddSharedParameter(doc, spacePowerParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_MechanicalEquipment }, BuiltInParameterGroup.PG_ENERGY_ANALYSIS);
/*
* Эти параметры должны быть внутри семейства, нет смысла назначать их всей категории
*
* done &= CustomSharedParameter.AddSharedParameter(doc, thermalPowerParameterName, "ADSK_Main_MEP", true,
* new BuiltInCategory[] { BuiltInCategory.OST_MechanicalEquipment }, BuiltInParameterGroup.PG_MECHANICAL);
*
* done &= CustomSharedParameter.AddSharedParameter(doc, airflowParameterName, "ADSK_Main_MEP", true,
* new BuiltInCategory[] { BuiltInCategory.OST_DuctTerminal }, BuiltInParameterGroup.PG_MECHANICAL_AIRFLOW);
*/
done &= SharedParameterUtils.AddSharedParameter(doc, skipParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_DuctTerminal, BuiltInCategory.OST_MechanicalEquipment }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
tr.Commit();
}
return(done);
}
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
uidoc = commandData.Application.ActiveUIDocument;
doc = uidoc.Document;
string horFamilyName = "ТеррНИИ_УГО_3D_Теплоизоляция зигзаг";
string verFamilyName = "ТеррНИИ_УГО_3D_Теплоизоляция зигзаг_Вертикальный";
string familyFolder = @"L:\REVIT\Семейства\ТеррНИИ\Условники\3D";
string familyType = "-";
// получаем объекты для штриховки и задаем параметры
var elems = GetElements();
if (elems == null)
{
return(Result.Cancelled);
}
using (Transaction tr = new Transaction(doc))
{
tr.Start("Загрузка семейства");
FamilySymbol horZigzagSymbol = FamilyInstanceUtils.FindOpeningFamily(doc, horFamilyName, familyFolder, familyType);
FamilySymbol verZigzagSymbol = FamilyInstanceUtils.FindOpeningFamily(doc, verFamilyName, familyFolder, familyType);
tr.Commit();
tr.Start("Добавление общих параметров");
var systemParamName = "ТеррНИИ_Наименование системы";
var idParamName = "ТеррНИИ_Идентификатор";
// добавляем общие параметры, в который будем копировать марку и систему
SharedParameterUtils.AddSharedParameter(doc, systemParamName,
new BuiltInCategory[] { BuiltInCategory.OST_GenericModel },
BuiltInParameterGroup.PG_TEXT);
SharedParameterUtils.AddSharedParameter(doc, idParamName,
new BuiltInCategory[] { BuiltInCategory.OST_GenericModel },
BuiltInParameterGroup.PG_ADSK_MODEL_PROPERTIES);
tr.Commit();
tr.Start("Рисование штриховок");
// проверяем какие штриховки уже есть в проекте и удаляем если есть обновляемые
List <ElementId> toDelete = new List <ElementId>();
List <string> elemsIds = elems.Select(x => x.Id.IntegerValue.ToString()).ToList();
List <FamilyInstance> fills = new FilteredElementCollector(doc).OfClass(typeof(FamilyInstance))
.Cast <FamilyInstance>().Where(x => x.Symbol.FamilyName == horFamilyName || x.Symbol.FamilyName == verFamilyName).ToList();
foreach (FamilyInstance i in fills)
{
var param = i.LookupParameter(idParamName);
if (param != null && elemsIds.Contains(param.AsString()))
{
toDelete.Add(i.Id);
}
}
doc.Delete(toDelete);
foreach (MEPCurve e in elems)
{
Curve ductCurve = (e.Location as LocationCurve).Curve;
Level level = e.ReferenceLevel;
var dir = GeometryUtils.GetDuctOrientation(e.ConnectorManager);
XYZ pt1 = ductCurve.GetEndPoint(0);
XYZ pt2 = ductCurve.GetEndPoint(1);
XYZ project_pt1 = new XYZ(pt1.X, pt1.Y, level.Elevation);
XYZ project_pt2 = new XYZ(pt2.X, pt2.Y, level.Elevation);
FamilyInstance fi = null;
try
{
if (dir == GeometryUtils.DuctOrientation.Horizontal)
{
Line line = Line.CreateBound(project_pt1, project_pt2);
fi = doc.Create.NewFamilyInstance(line, horZigzagSymbol, level, Autodesk.Revit.DB.Structure.StructuralType.NonStructural);
fi.get_Parameter(BuiltInParameter.INSTANCE_FREE_HOST_OFFSET_PARAM).Set(e.LevelOffset);
}
else if (dir == GeometryUtils.DuctOrientation.StraightVertical)
{
fi = doc.Create.NewFamilyInstance(project_pt1, verZigzagSymbol, level, Autodesk.Revit.DB.Structure.StructuralType.NonStructural);
fi.LookupParameter("Длина").Set(
pt1.DistanceTo(pt2)
);
var offset = e.LookupParameter("Нижняя отметка").AsDouble();
fi.get_Parameter(BuiltInParameter.INSTANCE_FREE_HOST_OFFSET_PARAM).Set(offset);
}
else
{
continue;
}
}
catch (Autodesk.Revit.Exceptions.ArgumentsInconsistentException)
{
continue;
}
// Вычисляем марку
string insul_type = e.get_Parameter(BuiltInParameter.RBS_REFERENCE_INSULATION_TYPE).AsString();
string insul_thickness = e.get_Parameter(BuiltInParameter.RBS_REFERENCE_INSULATION_THICKNESS).AsValueString();
// вычисляем наименование системы
var p = e.LookupParameter(systemParamName);
string element_system = p != null?p.AsString() : "";
// вычисляем смещение
Parameter ductWidth = e.get_Parameter(BuiltInParameter.RBS_CURVE_WIDTH_PARAM);
Parameter ductHeight = e.get_Parameter(BuiltInParameter.RBS_CURVE_HEIGHT_PARAM);
Parameter ductDiameter = e.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM);
Parameter pipeDiameter = e.get_Parameter(BuiltInParameter.RBS_PIPE_DIAMETER_PARAM);
double fillOffset = 0;
if (ductDiameter != null)
{
fillOffset = ductDiameter.AsDouble() / 2;
}
else if (pipeDiameter != null)
{
fillOffset = pipeDiameter.AsDouble() / 2;
}
else
{
fillOffset = ductWidth.AsDouble() > ductHeight.AsDouble() ? ductHeight.AsDouble() / 2 : ductWidth.AsDouble() / 2;
}
// Назначаем параметры
fi.LookupParameter("Марка").Set(insul_type + " " + insul_thickness);
fi.LookupParameter(systemParamName).Set(element_system);
//fi.LookupParameter("Смещение по Z").Set(fillOffset);
fi.LookupParameter(idParamName).Set(e.Id.IntegerValue.ToString());
}
tr.Commit();
}
return(Result.Succeeded);
}
static public void Calculate(Room room)
{
if (room == null)
{
return;
}
Document doc = room.Document;
string openingAreaParameterName = "ADSK_Площадь проемов";
string doorOpeningWidthParameterName = "ТеррНИИ_Ширина дверных проемов";
string openingFinishingAreaParameterName = "ТеррНИИ_Площадь проемов отделка";
string finishingHeightParameterName = "ТеррНИИ_Высота отделки помещения";
string finishingPerimeterParameterName = "ТеррНИИ_Периметр отделки";
string slopeAreaParameterName = "ТеррНИИ_Площадь откосов";
string doorOpeningPlaneAreaParameterName = "ТеррНИИ_Площадь проемов в плане";
SharedParameterUtils.AddSharedParameter(doc, openingAreaParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, doorOpeningWidthParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, openingFinishingAreaParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, finishingPerimeterParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, slopeAreaParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, doorOpeningPlaneAreaParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_ANALYSIS_RESULTS);
SharedParameterUtils.AddSharedParameter(doc, finishingHeightParameterName,
new BuiltInCategory[] { BuiltInCategory.OST_Rooms }, BuiltInParameterGroup.PG_CONSTRAINTS);
if (room == null || room.Location == null || room.Area.Equals(0))
{
return;
}
SpatialElementBoundaryOptions opt = new SpatialElementBoundaryOptions()
{
SpatialElementBoundaryLocation = SpatialElementBoundaryLocation.Finish
};
double roomHeight = room.UnboundedHeight;
double finishingHeight = room.LookupParameter(finishingHeightParameterName).AsDouble();
double allOpeningsArea = 0;
double allOpeningsFinishingArea = 0;
double doorOpeningsWidth = 0;
double finishingPerimeter = 0;
double allOpeningsSlope = 0;
double doorOpeningPlaneArea = 0;
List <ElementId> usedOpenings = new List <ElementId>();
foreach (var boundary in room.GetBoundarySegments(opt))
{
foreach (var segment in boundary)
{
finishingPerimeter += segment.GetCurve().Length;
if (segment.ElementId.IntegerValue == -1)
{
continue;
}
double segLength = segment.GetCurve().Length;
string catName = doc.GetElement(segment.ElementId).Category.Name;
if (catName == "<Разделитель помещений>")
{
double area = segLength * roomHeight;
allOpeningsArea += area;
allOpeningsFinishingArea += area * finishingHeight / roomHeight;
doorOpeningsWidth += segLength;
}
else if (catName == "Стены")
{
Wall wall = doc.GetElement(segment.ElementId) as Wall;
if (wall == null)
{
continue;
}
WallType wallType = doc.GetElement(wall.GetTypeId()) as WallType;
if (wallType.Kind == WallKind.Curtain)
{
double wallHeight = wall.get_Parameter(BuiltInParameter.WALL_USER_HEIGHT_PARAM).AsDouble();
double curtainRoomHeight = wallHeight <= roomHeight ? wallHeight : roomHeight;
double area = segLength * curtainRoomHeight;
allOpeningsArea += area;
allOpeningsFinishingArea += area * finishingHeight / roomHeight;
doorOpeningsWidth += segment.GetCurve().Length;
allOpeningsSlope = (segLength + 2 * curtainRoomHeight) * wall.Width / 2;
}
else
{
IEnumerable <ElementId> insertsIds = wall.FindInserts(true, false, true, true).Where(x => IsElementCollideRoom(room, doc.GetElement(x)));
foreach (ElementId insertId in insertsIds)
{
if (usedOpenings.Contains(insertId))
{
continue;
}
Element opening = doc.GetElement(insertId) as Element;
double openingWidth;
double openingHeight;
double openingThickness;
GetOpeningSize(wall, opening, out openingWidth, out openingHeight, out openingThickness);
// Проверяем, чтобы ширина отверстия не была больше самой комнаты
openingWidth = openingWidth > segLength ? segLength : openingWidth;
double openingArea = openingWidth * openingHeight;
double openingSlope = (openingWidth + openingHeight * 2) * openingThickness / 2;
Parameter p = opening.get_Parameter(BuiltInParameter.WALL_BASE_OFFSET) ?? opening.get_Parameter(BuiltInParameter.INSTANCE_SILL_HEIGHT_PARAM);
double itemBottomOffset = p.AsDouble();
double roomBottomOffset = room.get_Parameter(BuiltInParameter.ROOM_LOWER_OFFSET).AsDouble();
double openingFinishingArea = 0;
if (finishingHeight + roomBottomOffset >= itemBottomOffset + openingHeight)
{
openingFinishingArea = openingArea;
}
else if (finishingHeight + roomBottomOffset > itemBottomOffset)
{
openingFinishingArea = openingArea * (finishingHeight + roomBottomOffset - itemBottomOffset) / openingHeight;
}
allOpeningsArea += openingArea;
allOpeningsFinishingArea += openingFinishingArea;
allOpeningsSlope += openingSlope;
if (itemBottomOffset == roomBottomOffset)
{
doorOpeningsWidth += openingWidth;
doorOpeningPlaneArea += openingWidth * wall.Width / 2;
}
usedOpenings.Add(insertId);
}
}
}
}
}
room.LookupParameter(openingAreaParameterName).Set(allOpeningsArea);
room.LookupParameter(openingFinishingAreaParameterName).Set(allOpeningsFinishingArea);
room.LookupParameter(doorOpeningWidthParameterName).Set(doorOpeningsWidth);
room.LookupParameter(finishingPerimeterParameterName).Set(finishingPerimeter);
room.LookupParameter(slopeAreaParameterName).Set(allOpeningsSlope);
room.LookupParameter(doorOpeningPlaneAreaParameterName).Set(doorOpeningPlaneArea);
}