/// <summary>
/// Pull up keys (if possible) for the given node
/// </summary>
/// <param name="node"> node to pull up keys for </param>
/// <returns> Keys for the node </returns>
internal KeyVec GetKeys(Node node)
{
var nodeInfo = node.GetExtendedNodeInfo(m_command);
if (nodeInfo.Keys.NoKeys)
{
VisitNode(node);
}
return nodeInfo.Keys;
}
internal KeyVec GetKeys(System.Data.Entity.Core.Query.InternalTrees.Node node)
{
ExtendedNodeInfo extendedNodeInfo = node.GetExtendedNodeInfo(this.m_command);
if (extendedNodeInfo.Keys.NoKeys)
{
this.VisitNode(node);
}
return(extendedNodeInfo.Keys);
}
private Node ProjectOpCase1(Node projectNode)
{
#if DEBUG
var input = Dump.ToXml(projectNode);
#endif
//DEBUG
var op = (ProjectOp)projectNode.Op;
// Check to see if any of the computed Vars are in fact NestOps, and
// construct a collection column map for them.
var collectionInfoList = new List<CollectionInfo>();
var newChildren = new List<Node>();
var collectionNodes = new List<Node>();
var externalReferences = Command.CreateVarVec();
var collectionReferences = Command.CreateVarVec();
var definedVars = new List<Node>();
var referencedVars = new List<Node>();
foreach (var chi in projectNode.Child1.Children)
{
var varDefOp = (VarDefOp)chi.Op;
var definingExprNode = chi.Child0;
if (OpType.Collect
== definingExprNode.Op.OpType)
{
PlanCompiler.Assert(definingExprNode.HasChild0, "collect without input?");
PlanCompiler.Assert(OpType.PhysicalProject == definingExprNode.Child0.Op.OpType, "collect without physicalProject?");
var physicalProjectNode = definingExprNode.Child0;
// Update collection var->defining node map;
m_definingNodeMap.Add(varDefOp.Var, physicalProjectNode);
ConvertToNestOpInput(
physicalProjectNode, varDefOp.Var, collectionInfoList, collectionNodes, externalReferences, collectionReferences);
}
else if (OpType.VarRef
== definingExprNode.Op.OpType)
{
var refVar = ((VarRefOp)definingExprNode.Op).Var;
Node physicalProjectNode;
if (m_definingNodeMap.TryGetValue(refVar, out physicalProjectNode))
{
physicalProjectNode = CopyCollectionVarDefinition(physicalProjectNode);
//SQLBUDT #602888: We need to track the copy too, in case we need to reuse it
m_definingNodeMap.Add(varDefOp.Var, physicalProjectNode);
ConvertToNestOpInput(
physicalProjectNode, varDefOp.Var, collectionInfoList, collectionNodes, externalReferences, collectionReferences);
}
else
{
referencedVars.Add(chi);
newChildren.Add(chi);
}
}
else
{
definedVars.Add(chi);
newChildren.Add(chi);
}
}
// If we haven't identified a set of collection nodes, then we're done.
if (0 == collectionNodes.Count)
{
return projectNode;
}
// OK, we found something. We have some heavy lifting to perform.
// Then we need to build up a MultiStreamNestOp above the ProjectOp and the
// new collection nodes to get what we really need.
// pretend that the keys included everything from the new projectOp
var outputVars = Command.CreateVarVec(op.Outputs);
// First we need to modify this physicalProjectNode to leave out the collection
// Vars that we've just seen.
var newProjectVars = Command.CreateVarVec(op.Outputs);
newProjectVars.Minus(collectionReferences);
// If there are any external references from any of the collections, add
// those to the projectOp explicitly. This must be ok because the projectOp
// could not have had any left-correlation
newProjectVars.Or(externalReferences);
// Create the new projectOp, and hook it into this one. The new projectOp
// no longer references the collections in it's children; of course we only
// construct a new projectOp if it actually projects out some Vars.
if (!newProjectVars.IsEmpty)
{
if (IsNestOpNode(projectNode.Child0))
{
// If the input is a nest node, we need to figure out what to do with the
// rest of the in the VarDefList; we can't just pitch them, but we also
// really want to have the input be a nestop.
//
// What we do is essentially push any non-collection VarDef’s down under
// the driving node of the MSN:
//
// Project[Z,Y,W](Msn(X,Y),VarDef(Z=blah),VarDef(W=Collect(etc)) ==> MSN(MSN(Project[Z](X,VarDef(Z=blah)),Y),W)
//
// An optimization, of course being to not push anything down when there
// aren't any extra vars defined.
if (definedVars.Count == 0
&& referencedVars.Count == 0)
{
// We'll just pick the NestNode; we expect MergeNestedNestOps to merge
// it into what we're about to generate later.
projectNode = projectNode.Child0;
EnsureReferencedVarsAreRemoved(referencedVars, outputVars);
}
else
{
var nestedNestOp = (NestBaseOp)projectNode.Child0.Op;
// Build the new ProjectOp to be used as input to the new nestedNestOp;
// it's input is the input to the current nestedNestOp and a new
// VarDefList with only the vars that were defined on the top level
// ProjectOp.
var newNestedProjectNodeInputs = new List<Node>();
newNestedProjectNodeInputs.Add(projectNode.Child0.Child0);
referencedVars.AddRange(definedVars);
newNestedProjectNodeInputs.Add(Command.CreateNode(Command.CreateVarDefListOp(), referencedVars));
var newNestedProjectOutputs = Command.CreateVarVec(nestedNestOp.Outputs);
// SQLBUDT #508722: We need to remove the collection vars,
// these are not produced by the project
foreach (var ci in nestedNestOp.CollectionInfo)
{
newNestedProjectOutputs.Clear(ci.CollectionVar);
}
foreach (var varDefNode in referencedVars)
{
newNestedProjectOutputs.Set(((VarDefOp)varDefNode.Op).Var);
}
var newNestedProjectNode = Command.CreateNode(
Command.CreateProjectOp(newNestedProjectOutputs), newNestedProjectNodeInputs);
// Now build the new nestedNestedNestOp, with the new nestedProjectOp
// as it's input; we have to update the outputs of the NestOp to include
// the vars we pushed down.
var newNestedNestOutputs = Command.CreateVarVec(newNestedProjectOutputs);
newNestedNestOutputs.Or(nestedNestOp.Outputs);
var newNestedNestOp = Command.CreateMultiStreamNestOp(
nestedNestOp.PrefixSortKeys,
newNestedNestOutputs,
nestedNestOp.CollectionInfo);
var newNestedNestNodeInputs = new List<Node>();
newNestedNestNodeInputs.Add(newNestedProjectNode);
for (var j = 1; j < projectNode.Child0.Children.Count; j++)
{
newNestedNestNodeInputs.Add(projectNode.Child0.Children[j]);
}
projectNode = Command.CreateNode(newNestedNestOp, newNestedNestNodeInputs);
// We don't need to remove or remap referenced vars here because
// we're including them on the node we create; they won't become
// invalid.
}
}
else
{
var newProjectOp = Command.CreateProjectOp(newProjectVars);
projectNode.Child1 = Command.CreateNode(projectNode.Child1.Op, newChildren);
projectNode.Op = newProjectOp;
EnsureReferencedVarsAreRemapped(referencedVars);
}
}
else
{
projectNode = projectNode.Child0;
EnsureReferencedVarsAreRemoved(referencedVars, outputVars);
}
// We need to make sure that we project out any external references to the driving
// node that the nested collections have, or we're going to end up with unresolvable
// vars when we pull them up over the current driving node. Of course, we only
// want the references that are actually ON the driving node.
externalReferences.And(projectNode.GetExtendedNodeInfo(Command).Definitions);
outputVars.Or(externalReferences);
// There are currently no prefix sortkeys. The processing for a SortOp may later
// introduce some prefix sortkeys, but there aren't any now.
var nestOp = Command.CreateMultiStreamNestOp(new List<SortKey>(), outputVars, collectionInfoList);
// Insert the current node at the head of the the list of collections
collectionNodes.Insert(0, projectNode);
var nestNode = Command.CreateNode(nestOp, collectionNodes);
// Finally, recompute node info
Command.RecomputeNodeInfo(projectNode);
Command.RecomputeNodeInfo(nestNode);
#if DEBUG
var size = input.Length; // GC.KeepAlive makes FxCop Grumpy.
var output = Dump.ToXml(nestNode);
#endif
//DEBUG
return nestNode;
}
private ExtendedNodeInfo GetExtendedNodeInfo(Node n)
{
return(n.GetExtendedNodeInfo(m_command));
}
internal virtual ExtendedNodeInfo GetExtendedNodeInfo(Node n)
{
return(n.GetExtendedNodeInfo(this));
}
// <summary>
// Get extended node information for a RelOpNode
// </summary>
// <param name="n"> the node </param>
// <returns> extended node info for this node </returns>
internal virtual ExtendedNodeInfo GetExtendedNodeInfo(Node n)
{
return n.GetExtendedNodeInfo(this);
}