/// <summary>
/// Compute the upper bound on time before two shapes penetrate. Time is represented as
/// a fraction between [0,tMax]. This uses a swept separating axis and may miss some intermediate,
/// non-tunneling collision. If you change the time interval, you should call this function
/// again.
/// Note: use Distance() to compute the contact point and normal at the time of impact.
/// </summary>
/// <param name="output">The output.</param>
/// <param name="input">The input.</param>
public static void CalculateTimeOfImpact(out TOIOutput output, TOIInput input)
{
if (Settings.EnableDiagnostics) //FPE: We only gather diagnostics when enabled
{
++TOICalls;
}
output = new TOIOutput();
output.State = TOIOutputState.Unknown;
output.T = input.TMax;
Sweep sweepA = input.SweepA;
Sweep sweepB = input.SweepB;
// Large rotations can make the root finder fail, so we normalize the
// sweep angles.
sweepA.Normalize();
sweepB.Normalize();
FP tMax = input.TMax;
FP totalRadius = input.ProxyA.Radius + input.ProxyB.Radius;
FP target = Spax.FPMath.Max(Settings.LinearSlop, totalRadius - 3.0f * Settings.LinearSlop);
FP tolerance = 0.25f * Settings.LinearSlop;
Debug.Assert(target > tolerance);
FP t1 = 0.0f;
const int k_maxIterations = 20;
int iter = 0;
// Prepare input for distance query.
_distanceInput = _distanceInput ?? new DistanceInput();
_distanceInput.ProxyA = input.ProxyA;
_distanceInput.ProxyB = input.ProxyB;
_distanceInput.UseRadii = false;
// The outer loop progressively attempts to compute new separating axes.
// This loop terminates when an axis is repeated (no progress is made).
for (; ;)
{
Transform xfA, xfB;
sweepA.GetTransform(out xfA, t1);
sweepB.GetTransform(out xfB, t1);
// Get the distance between shapes. We can also use the results
// to get a separating axis.
_distanceInput.TransformA = xfA;
_distanceInput.TransformB = xfB;
DistanceOutput distanceOutput;
SimplexCache cache;
Distance.ComputeDistance(out distanceOutput, out cache, _distanceInput);
// If the shapes are overlapped, we give up on continuous collision.
if (distanceOutput.Distance <= 0.0f)
{
// Failure!
output.State = TOIOutputState.Overlapped;
output.T = 0.0f;
break;
}
if (distanceOutput.Distance < target + tolerance)
{
// Victory!
output.State = TOIOutputState.Touching;
output.T = t1;
break;
}
SeparationFunction.Set(ref cache, input.ProxyA, ref sweepA, input.ProxyB, ref sweepB, t1);
// Compute the TOI on the separating axis. We do this by successively
// resolving the deepest point. This loop is bounded by the number of vertices.
bool done = false;
FP t2 = tMax;
int pushBackIter = 0;
for (; ;)
{
// Find the deepest point at t2. Store the witness point indices.
int indexA, indexB;
FP s2 = SeparationFunction.FindMinSeparation(out indexA, out indexB, t2);
// Is the final configuration separated?
if (s2 > target + tolerance)
{
// Victory!
output.State = TOIOutputState.Seperated;
output.T = tMax;
done = true;
break;
}
// Has the separation reached tolerance?
if (s2 > target - tolerance)
{
// Advance the sweeps
t1 = t2;
break;
}
// Compute the initial separation of the witness points.
FP s1 = SeparationFunction.Evaluate(indexA, indexB, t1);
// Check for initial overlap. This might happen if the root finder
// runs out of iterations.
if (s1 < target - tolerance)
{
output.State = TOIOutputState.Failed;
output.T = t1;
done = true;
break;
}
// Check for touching
if (s1 <= target + tolerance)
{
// Victory! t1 should hold the TOI (could be 0.0).
output.State = TOIOutputState.Touching;
output.T = t1;
done = true;
break;
}
// Compute 1D root of: f(x) - target = 0
int rootIterCount = 0;
FP a1 = t1, a2 = t2;
for (; ;)
{
// Use a mix of the secant rule and bisection.
FP t;
if ((rootIterCount & 1) != 0)
{
// Secant rule to improve convergence.
t = a1 + (target - s1) * (a2 - a1) / (s2 - s1);
}
else
{
// Bisection to guarantee progress.
t = 0.5f * (a1 + a2);
}
++rootIterCount;
if (Settings.EnableDiagnostics) //FPE: We only gather diagnostics when enabled
{
++TOIRootIters;
}
FP s = SeparationFunction.Evaluate(indexA, indexB, t);
if (FP.Abs(s - target) < tolerance)
{
// t2 holds a tentative value for t1
t2 = t;
break;
}
// Ensure we continue to bracket the root.
if (s > target)
{
a1 = t;
s1 = s;
}
else
{
a2 = t;
s2 = s;
}
if (rootIterCount == 50)
{
break;
}
}
if (Settings.EnableDiagnostics) //FPE: We only gather diagnostics when enabled
{
TOIMaxRootIters = Math.Max(TOIMaxRootIters, rootIterCount);
}
++pushBackIter;
if (pushBackIter == Settings.MaxPolygonVertices)
{
break;
}
}
++iter;
if (Settings.EnableDiagnostics) //FPE: We only gather diagnostics when enabled
{
++TOIIters;
}
if (done)
{
break;
}
if (iter == k_maxIterations)
{
// Root finder got stuck. Semi-victory.
output.State = TOIOutputState.Failed;
output.T = t1;
break;
}
}
if (Settings.EnableDiagnostics) //FPE: We only gather diagnostics when enabled
{
TOIMaxIters = Math.Max(TOIMaxIters, iter);
}
}
public static void Set(ref SimplexCache cache, DistanceProxy proxyA, ref Sweep sweepA, DistanceProxy proxyB, ref Sweep sweepB, FP t1)
{
_localPoint = FPVector2.zero;
_proxyA = proxyA;
_proxyB = proxyB;
int count = cache.Count;
Debug.Assert(0 < count && count < 3);
_sweepA = sweepA;
_sweepB = sweepB;
Transform xfA, xfB;
_sweepA.GetTransform(out xfA, t1);
_sweepB.GetTransform(out xfB, t1);
if (count == 1)
{
_type = SeparationFunctionType.Points;
FPVector2 localPointA = _proxyA.Vertices[cache.IndexA[0]];
FPVector2 localPointB = _proxyB.Vertices[cache.IndexB[0]];
FPVector2 pointA = MathUtils.Mul(ref xfA, localPointA);
FPVector2 pointB = MathUtils.Mul(ref xfB, localPointB);
_axis = pointB - pointA;
_axis.Normalize();
}
else if (cache.IndexA[0] == cache.IndexA[1])
{
// Two points on B and one on A.
_type = SeparationFunctionType.FaceB;
FPVector2 localPointB1 = proxyB.Vertices[cache.IndexB[0]];
FPVector2 localPointB2 = proxyB.Vertices[cache.IndexB[1]];
FPVector2 a = localPointB2 - localPointB1;
_axis = new FPVector2(a.y, -a.x);
_axis.Normalize();
FPVector2 normal = MathUtils.Mul(ref xfB.q, _axis);
_localPoint = 0.5f * (localPointB1 + localPointB2);
FPVector2 pointB = MathUtils.Mul(ref xfB, _localPoint);
FPVector2 localPointA = proxyA.Vertices[cache.IndexA[0]];
FPVector2 pointA = MathUtils.Mul(ref xfA, localPointA);
FP s = FPVector2.Dot(pointA - pointB, normal);
if (s < 0.0f)
{
_axis = -_axis;
}
}
else
{
// Two points on A and one or two points on B.
_type = SeparationFunctionType.FaceA;
FPVector2 localPointA1 = _proxyA.Vertices[cache.IndexA[0]];
FPVector2 localPointA2 = _proxyA.Vertices[cache.IndexA[1]];
FPVector2 a = localPointA2 - localPointA1;
_axis = new FPVector2(a.y, -a.x);
_axis.Normalize();
FPVector2 normal = MathUtils.Mul(ref xfA.q, _axis);
_localPoint = 0.5f * (localPointA1 + localPointA2);
FPVector2 pointA = MathUtils.Mul(ref xfA, _localPoint);
FPVector2 localPointB = _proxyB.Vertices[cache.IndexB[0]];
FPVector2 pointB = MathUtils.Mul(ref xfB, localPointB);
FP s = FPVector2.Dot(pointB - pointA, normal);
if (s < 0.0f)
{
_axis = -_axis;
}
}
//FPE note: the returned value that used to be here has been removed, as it was not used.
}
public static FP FindMinSeparation(out int indexA, out int indexB, FP t)
{
Transform xfA, xfB;
_sweepA.GetTransform(out xfA, t);
_sweepB.GetTransform(out xfB, t);
switch (_type)
{
case SeparationFunctionType.Points:
{
FPVector2 axisA = MathUtils.MulT(ref xfA.q, _axis);
FPVector2 axisB = MathUtils.MulT(ref xfB.q, -_axis);
indexA = _proxyA.GetSupport(axisA);
indexB = _proxyB.GetSupport(axisB);
FPVector2 localPointA = _proxyA.Vertices[indexA];
FPVector2 localPointB = _proxyB.Vertices[indexB];
FPVector2 pointA = MathUtils.Mul(ref xfA, localPointA);
FPVector2 pointB = MathUtils.Mul(ref xfB, localPointB);
FP separation = FPVector2.Dot(pointB - pointA, _axis);
return(separation);
}
case SeparationFunctionType.FaceA:
{
FPVector2 normal = MathUtils.Mul(ref xfA.q, _axis);
FPVector2 pointA = MathUtils.Mul(ref xfA, _localPoint);
FPVector2 axisB = MathUtils.MulT(ref xfB.q, -normal);
indexA = -1;
indexB = _proxyB.GetSupport(axisB);
FPVector2 localPointB = _proxyB.Vertices[indexB];
FPVector2 pointB = MathUtils.Mul(ref xfB, localPointB);
FP separation = FPVector2.Dot(pointB - pointA, normal);
return(separation);
}
case SeparationFunctionType.FaceB:
{
FPVector2 normal = MathUtils.Mul(ref xfB.q, _axis);
FPVector2 pointB = MathUtils.Mul(ref xfB, _localPoint);
FPVector2 axisA = MathUtils.MulT(ref xfA.q, -normal);
indexB = -1;
indexA = _proxyA.GetSupport(axisA);
FPVector2 localPointA = _proxyA.Vertices[indexA];
FPVector2 pointA = MathUtils.Mul(ref xfA, localPointA);
FP separation = FPVector2.Dot(pointA - pointB, normal);
return(separation);
}
default:
Debug.Assert(false);
indexA = -1;
indexB = -1;
return(0.0f);
}
}