//static Plane CreatePlane(Point origin, Direction normal)
//{
// return Plane.Create(Frame.Create(origin, normal));
//}
static DesignBody CreatePPBar(Part part)
{
Window window = Window.ActiveWindow;
Debug.Assert(part != null, "part 1= null");
double barRadius = 0.002;
double barLenght = 0.020;
Point pointStart = Point.Create(0, 0.03, 0.07);
Point pointEnd = Point.Create(0.02, 0.04, 0.09);
DesignCurve.Create(part, CurveSegment.Create(pointStart, pointEnd));
//Plane plane = CreatePlane(pointStart, normal);
//DesignCurve line = DesignCurve.Create();
//Direction direction = Direction.Equals(CurveSegment);
//Frame frame = Frame.Create(pointStart);
//Plane plane = Plane.Create(frame);
Body bar = Body.ExtrudeProfile(new CircleProfile(Plane.PlaneYZ, barRadius), barLenght);
return(DesignBody.Create(part, "Cylinder", bar));
}
public static DesignBody CreateBar(Part part)
{
Debug.Assert(part != null, "part != null");
double barRadius = 0.002;
double barLenght = 0.020;
Point pointStart = Point.Create(0, 0, 0);
Point pointEnd = Point.Create(0, 0.04, 0.05);
DesignCurve.Create(part, CurveSegment.Create(pointStart, pointEnd));
Body cylinder1 = Body.ExtrudeProfile(new CircleProfile(Plane.PlaneZX, barRadius), barLenght);
DesignBody.Create(part, "Cylinder1", cylinder1);
Body cylinder2 = Body.ExtrudeProfile(new CircleProfile(Plane.PlaneXY, barRadius), barLenght);
DesignBody.Create(part, "Cylinder2", cylinder2);
Body cylinder3 = Body.ExtrudeProfile(new CircleProfile(Plane.PlaneYZ, barRadius), barLenght);
return(DesignBody.Create(part, "Cylinder3", cylinder3));
}
static void CreateLine(Part line)
{
Window window = Window.ActiveWindow;
Point pointStart = Point.Create(0.10, 0.04, 0.07);
Point pointEnd = Point.Create(0.02, 0.11, 0.09);
DesignCurve.Create(line, CurveSegment.Create(pointStart, pointEnd));
MessageBox.Show($"Line between {pointStart} and {pointEnd} will be created", "Info");
}
static void CreatePoints(Part part)
{
Window window = Window.ActiveWindow;
List <PointTarget> points = ImportingFun.LoadSampleData();
foreach (var PointTarget in points)
{
//MessageBox.Show($"Line between {points[0]} and will be created");
Point.Create(PointTarget.xPoint, PointTarget.yPoint, PointTarget.zPoint);
}
}
static void CreateLines(Part multiLine)
{
Window window = Window.ActiveWindow;
List <PointTarget> points = ImportingFun.LoadSampleData();
foreach (var PointTarget in points)
{
//MessageBox.Show($"Line between {points[0]} and will be created");
DesignCurve.Create(multiLine, CurveSegment.Create(Point.Create(PointTarget.xPoint, PointTarget.yPoint, PointTarget.zPoint), Point.Create(PointTarget.x2Point, PointTarget.y2Point, PointTarget.z2Point)));
}
}
static void MultiBeamCreator(Part part)
{
try
{
//Document doc = Document.GetDocument(Settings.Default.ProjectPath + "/" + Settings.Default.ProjectName + ".scdoc");
Document doc = Window.ActiveWindow.Document;
Part p = doc.MainPart;
int id = 0;
List <PointLocation> pointLocations = CsvDataRead.ReadData(); // Get all beams out of file
foreach (var location in pointLocations)
{
Point startPoint = Point.Create(Double.Parse("" + (location.xPoint / 1000), new CultureInfo("de-DE")), Double.Parse("" + (location.yPoint / 1000), new CultureInfo("de-DE")), Double.Parse("" + (location.zPoint / 1000), new CultureInfo("de-DE")));
Point endPoint = Point.Create(Double.Parse("" + (location.x2Point / 1000), new CultureInfo("de-DE")), Double.Parse("" + (location.y2Point / 1000), new CultureInfo("de-DE")), Double.Parse("" + (location.z2Point / 1000), new CultureInfo("de-DE")));
if (location.diameter != 0)
{
try
{
double diameter = location.diameter;
double radi = Double.Parse("" + (location.diameter / 2000), new CultureInfo("de-DE"));
var lineSegment = CurveSegment.Create(startPoint, endPoint);
var designLine = DesignCurve.Create(p, lineSegment);
Vector heightVector = endPoint - startPoint;
Frame frame = Frame.Create(startPoint, heightVector.Direction);
Plane plane = Plane.Create(frame);
var profi = new CircleProfile(plane, radi);
//var doc = DocumentHelper.GetActiveDocument();
//Document doc = Document.GetDocument(Path.GetDirectoryName("Document1"));
//Document doc = window.ActiveContext.Context.Document;
Part beamProfile = Part.CreateBeamProfile(doc, "Beam" + id, profi);
Beam.Create(beamProfile, designLine);
id += 1;
}
catch (Exception ex)
{
MessageBox.Show(ex.ToString(), "Info");
}
}
}
}
catch (Exception exe)
{
MessageBox.Show(exe.ToString(), "Info");
}
}
public static DesignBody CylinderPtPt(Part part)
{
Point point1 = Point.Create(0.00, 0.01, 0.00);
Point point2 = Point.Create(0.03, 0.05, 0.04);
double diameter = 0.004;
double radi = diameter / 2;
Vector heightVector = point2 - point1;
Frame frame = Frame.Create(point1, heightVector.Direction);
Plane plane = Plane.Create(frame);
Body cylinder4 = Body.ExtrudeProfile(new CircleProfile(plane, radi), heightVector.Magnitude);
return(DesignBody.Create(part, "Cylinder3", cylinder4));
}
protected override void OnExecute(Command command, ExecutionContext context, Rectangle buttonRect)
{
Settings set = Settings.Default;
if (Window.ActiveWindow.ActiveContext.SingleSelection is DesignFace)
{
// Reset all necessary parameteres
Settings.Default.Dimension = 1; // Save that 2D Dimension is chosen
Settings.Default.forceCount = 0;
Settings.Default.forces = "";
Settings.Default.bearingLoadCount = 0;
Settings.Default.bearingLoads = "";
Settings.Default.xLength = 0;
Settings.Default.yLength = 0;
Settings.Default.zLength = 0;
Settings.Default.Save();
Form form = new CreateCrossSectionForm();
form.StartPosition = FormStartPosition.Manual;
Screen screen = Screen.PrimaryScreen;
Rectangle bounds = screen.Bounds;
// Show form in left bottom corner
form.Location = (new System.Drawing.Point(bounds.X + (int)(bounds.Width * 0.05), bounds.Height - 258 - (int)(bounds.Height * 0.1))); // 523 = form Width, 258 Form Height
DialogResult dr = form.ShowDialog();
// Show testDialog as a modal dialog and determine if DialogResult = OK.
if (dr == DialogResult.OK)
{
try
{
int count = 1; // node number
double distance = set.distance; // point distance
bool teilbar = true;
// Values to find origin of face
double Xursprung = double.MaxValue;
double Zursprung = double.MaxValue;
double Xmax = double.MinValue;
double Zmax = double.MinValue;
double length = 0;
double width = 0;
IDocObject face = Window.ActiveWindow.ActiveContext.SingleSelection;
IDesignFace designFace = (IDesignFace)face;
foreach (IDesignEdge e in designFace.Edges)
{
SpaceClaim.Api.V19.Geometry.Point p1 = e.Shape.StartPoint;
SpaceClaim.Api.V19.Geometry.Point p2 = e.Shape.EndPoint;
// Locate minimum point of plane
if (p1.X < Xursprung)
{
Xursprung = p1.X;
}
if (p2.X < Xursprung)
{
Xursprung = p2.X;
}
if (p1.Z < Zursprung)
{
Zursprung = p1.Z;
}
if (p2.Z < Zursprung)
{
Zursprung = p2.Z;
}
// Locate max value of x and z
if (p1.X > Xmax)
{
Xmax = p1.X;
}
if (p2.X > Xmax)
{
Xmax = p2.X;
}
if (p1.Z > Zmax)
{
Zmax = p1.Z;
}
if (p2.Z > Zmax)
{
Zmax = p2.Z;
}
// Check if distance is a factor of length, height or width
if ((e.Shape.Length * 1000) % distance > -0.001 && (e.Shape.Length * 1000) % distance < 0.001)
{
}
else
{
teilbar = false;
}
}
if (teilbar)
{
// Create all points in block
for (double z = Zursprung; z <= Zmax + 0.001; z += distance / 1000)
{
for (double x = Xursprung; x <= Xmax + 0.001; x += distance / 1000)
{
SpaceClaim.Api.V19.Geometry.Point point = SpaceClaim.Api.V19.Geometry.Point.Create(x, 0, z);
DatumPoint P1 = DatumPoint.Create(Window.ActiveWindow.Document.MainPart, "P" + count, point);
count++;
}
}
// save length
set.xLength = (Xmax - Xursprung) * 1000;
set.zLength = (Zmax - Zursprung) * 1000;
set.Dimension = 1;
set.Save();
createCSV2D(decimal.Parse("" + set.xLength), decimal.Parse("" + set.zLength), decimal.Parse("" + distance), set.csv2Path);
// Set camera position
Window.ActiveWindow.SetProjection(Frame.Create(SpaceClaim.Api.V19.Geometry.Point.Origin, -Direction.DirY), 0.1);
}
else
{
MessageBox.Show("Distance is not a factor of length, height or width of face!", "Info");
Settings.Default.CrossSecFormOpened = false;
Settings.Default.Save();
}
}
catch (Exception es)
{
MessageBox.Show("");
}
}
else if (dr == DialogResult.Cancel)
{
//MessageBox.Show("Canceled!");
}
}
else
{
MessageBox.Show("Select a face in document first!", "Info");
}
}
protected override void OnExecute(Command command, ExecutionContext context, Rectangle buttonRect)
{
if (Window.ActiveWindow.ActiveContext.SingleSelection is IDesignBody)
{
// reset all necessary parameters
Settings.Default.Dimension = 0; // Save that 3D Dimension is chosen
Settings.Default.forceCount = 0;
Settings.Default.forces = "";
Settings.Default.bearingLoadCount = 0;
Settings.Default.bearingLoads = "";
Settings.Default.xLength = 0;
Settings.Default.yLength = 0;
Settings.Default.zLength = 0;
Settings.Default.Save();
Form form = new CreateCrossSectionForm();
form.StartPosition = FormStartPosition.Manual;
Screen screen = Screen.PrimaryScreen;
Rectangle bounds = screen.Bounds;
// Show form in left bottom corner
form.Location = (new System.Drawing.Point(bounds.X + (int)(bounds.Width * 0.05), bounds.Height - 258 - (int)(bounds.Height * 0.1))); // 523 = form Width, 258 Form Height
DialogResult dr = form.ShowDialog();
// Show testDialog as a modal dialog and determine if DialogResult = OK.
Settings set = Settings.Default;
double distance = set.distance;
if (dr == DialogResult.OK)
{
//MessageBox.Show("OK, distance : "+ distance);
// Create points with selected distance
bool teilbar = true;
int count = 1; // point number
// parameters to find origin of body
double Xursprung = double.MaxValue;
double Yursprung = double.MaxValue;
double Zursprung = double.MaxValue;
double Xmax = double.MinValue;
double Ymax = double.MinValue;
double Zmax = double.MinValue;
Part mainPart = Window.ActiveWindow.Document.MainPart;
Window.ActiveWindow.InteractionMode = InteractionMode.Solid;
Window.ActiveWindow.ZoomSelection();
//var allBodies = new List<IDesignBody>();
//GatherBodies(mainPart, allBodies); // gets all bodies in window
IDocObject Ibody = Window.ActiveWindow.ActiveContext.SingleSelection;
IDesignBody designBody = (IDesignBody)Ibody;
DesignBody body = designBody.Master;
body.Name = "DesignSpace";
body.Style = BodyStyle.Transparent; // Make Block transparent
body.SetVisibility(null, false);
foreach (IDesignFace b in designBody.Faces)
{
foreach (IDesignEdge e in b.Edges)
{
SpaceClaim.Api.V19.Geometry.Point p1 = e.Shape.StartPoint;
SpaceClaim.Api.V19.Geometry.Point p2 = e.Shape.EndPoint;
// Locate minimum point of block
if (p1.X < Xursprung)
{
Xursprung = p1.X;
}
if (p2.X < Xursprung)
{
Xursprung = p2.X;
}
if (p1.Y < Yursprung)
{
Yursprung = p1.Y;
}
if (p2.Y < Yursprung)
{
Yursprung = p2.Y;
}
if (p1.Z < Zursprung)
{
Zursprung = p1.Z;
}
if (p2.Z < Zursprung)
{
Zursprung = p2.Z;
}
// Locate max value of x, y and z
if (p1.X > Xmax)
{
Xmax = p1.X;
}
if (p2.X > Xmax)
{
Xmax = p2.X;
}
if (p1.Y > Ymax)
{
Ymax = p1.Y;
}
if (p2.Y > Ymax)
{
Ymax = p2.Y;
}
if (p1.Z > Zmax)
{
Zmax = p1.Z;
}
if (p2.Z > Zmax)
{
Zmax = p2.Z;
}
// Check if distance is a factor of length, height or width
if ((e.Shape.Length * 1000) % distance > -0.001 && (e.Shape.Length * 1000) % distance < 0.001)
{
}
else
{
teilbar = false;
}
}
}
if (teilbar)
{
// Create all points in block
for (double z = Zursprung; z <= Zmax + 0.001; z += distance / 1000)
{
for (double y = Yursprung; y <= Ymax + 0.001; y += distance / 1000)
{
for (double x = Xursprung; x <= Xmax + 0.001; x += distance / 1000)
{
SpaceClaim.Api.V19.Geometry.Point point = SpaceClaim.Api.V19.Geometry.Point.Create(x, y, z);
DatumPoint P1 = DatumPoint.Create(Window.ActiveWindow.Document.MainPart, "P" + count, point);
count++;
}
}
}
// save length
set.xLength = (Xmax - Xursprung) * 1000;
set.yLength = (Ymax - Yursprung) * 1000;
set.zLength = (Zmax - Zursprung) * 1000;
set.Save();
createCSV2(decimal.Parse("" + set.xLength), decimal.Parse("" + set.yLength), decimal.Parse("" + set.zLength), decimal.Parse("" + set.distance), set.csv2Path);
// Set camera position
Window.ActiveWindow.SetProjection(Frame.Create(SpaceClaim.Api.V19.Geometry.Point.Origin, -Direction.DirZ), 0.1);
}
else
{
MessageBox.Show("Distance is not a factor of length, height or width of block!", "Info");
body.Name = "DesignSpace";
body.SetVisibility(null, true);
Settings.Default.CrossSecFormOpened = false;
Settings.Default.Save();
}
}
else if (dr == DialogResult.Cancel)
{
//MessageBox.Show("Canceled!");
}
Settings.Default.CrossSecFormOpened = true;
Settings.Default.Save();
}
else
{
MessageBox.Show("Select a body in document first!", "Info");
}
}