private Face3d ReadFace3D(ref CodeValuePair code)
{
var face = new Face3d();
Vector3f v0 = Vector3f.Zero;
Vector3f v1 = Vector3f.Zero;
Vector3f v2 = Vector3f.Zero;
Vector3f v3 = Vector3f.Zero;
Dictionary<ApplicationRegistry, XData> xData = new Dictionary<ApplicationRegistry, XData>();
code = this.ReadCodePair();
while (code.Code != 0)
{
switch (code.Code)
{
case 5:
face.Handle = code.Value;
code = this.ReadCodePair();
break;
case 8: //layer code
face.Layer = this.GetLayer(code.Value);
code = this.ReadCodePair();
break;
case 62: //aci color code
face.Color = new AciColor(short.Parse(code.Value));
code = this.ReadCodePair();
break;
case 6: //type line code
face.LineType = this.GetLineType(code.Value);
code = this.ReadCodePair();
break;
case 10:
v0.X = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 20:
v0.Y = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 30:
v0.Z = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 11:
v1.X = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 21:
v1.Y = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 31:
v1.Z = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 12:
v2.X = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 22:
v2.Y = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 32:
v2.Z = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 13:
v3.X = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 23:
v3.Y = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 33:
v3.Z = float.Parse(code.Value);
code = this.ReadCodePair();
break;
case 70:
face.EdgeFlags = (EdgeFlags) (int.Parse(code.Value));
code = this.ReadCodePair();
break;
case 1001:
XData xDataItem = this.ReadXDataRecord(code.Value, ref code);
xData.Add(xDataItem.ApplicationRegistry, xDataItem);
break;
default:
if (code.Code >= 1000 && code.Code <= 1071)
throw new DxfInvalidCodeValueEntityException(code.Code, code.Value, this.file,
"The extended data of an entity must start with the application registry code " + this.fileLine);
code = this.ReadCodePair();
break;
}
}
face.FirstVertex = v0;
face.SecondVertex = v1;
face.ThirdVertex = v2;
face.FourthVertex = v3;
face.XData = xData;
return face;
}
private static void Face3d()
{
DxfDocument dxf = new DxfDocument();
Face3d face3d = new Face3d();
face3d.FirstVertex = new Vector3f(0, 0, 0);
face3d.SecondVertex = new Vector3f(1, 0, 0);
face3d.ThirdVertex = new Vector3f(1, 1, 0);
face3d.FourthVertex = new Vector3f(0, 1, 0);
dxf.AddEntity(face3d);
dxf.Save("face.dxf", DxfVersion.AutoCad2000);
dxf.Load("face.dxf");
dxf.Save("face return.dxf", DxfVersion.AutoCad2000);
}
private static void WriteDxfFile()
{
DxfDocument dxf = new DxfDocument();
//arc
Arc arc = new Arc(new Vector3f(10, 10, 0), 10, 45, 135);
arc.Layer = new Layer("arc");
arc.Layer.Color.Index = 1;
dxf.AddEntity(arc);
//xData sample
XData xdata = new XData(new ApplicationRegistry("SharpDxf"));
xdata.XDataRecord.Add(new XDataRecord(XDataCode.String, "extended data with SharpDxf"));
xdata.XDataRecord.Add(XDataRecord.OpenControlString);
xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionX, 0));
xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionY, 0));
xdata.XDataRecord.Add(new XDataRecord(XDataCode.WorldSpacePositionZ, 0));
xdata.XDataRecord.Add(XDataRecord.CloseControlString);
XData xdata2 = new XData(new ApplicationRegistry("other application"));
xdata2.XDataRecord.Add(new XDataRecord(XDataCode.String, "extended data with SharpDxf"));
xdata2.XDataRecord.Add(XDataRecord.OpenControlString);
xdata2.XDataRecord.Add(new XDataRecord(XDataCode.String, "string record"));
xdata2.XDataRecord.Add(new XDataRecord(XDataCode.Real, 15.5));
xdata2.XDataRecord.Add(new XDataRecord(XDataCode.Long, 350));
xdata2.XDataRecord.Add(XDataRecord.CloseControlString);
//circle
Vector3f extrusion = new Vector3f(1, 1, 1);
Vector3f centerWCS = new Vector3f(1, 1, 1);
Vector3d centerOCS = MathHelper.Transform((Vector3d) centerWCS,
(Vector3d)extrusion,
MathHelper.CoordinateSystem.World,
MathHelper.CoordinateSystem.Object);
Circle circle = new Circle((Vector3f) centerOCS, 5);
circle.Layer = new Layer("circle with spaces");
circle.Layer.Color=AciColor.Yellow;
circle.LineType = LineType.Dashed;
circle.Normal = extrusion;
circle.XData=new Dictionary<ApplicationRegistry, XData>
{
{xdata.ApplicationRegistry, xdata},
{xdata2.ApplicationRegistry, xdata2}
};
dxf.AddEntity(circle);
//points
Point point1 = new Point(new Vector3f(-3, -3, 0));
point1.Layer = new Layer("point");
point1.Color = new AciColor(30);
Point point2 = new Point(new Vector3f(1, 1, 1));
point2.Layer = point1.Layer;
point2.Layer.Color.Index = 9;
point2.Normal = new Vector3f(1, 1, 1);
dxf.AddEntity(point1);
dxf.AddEntity(point2);
//3dface
Face3d face3D = new Face3d(new Vector3f(-5, -5, 5),
new Vector3f(5, -5, 5),
new Vector3f(5, 5, 5),
new Vector3f(-5, 5, 5));
face3D.Layer = new Layer("3dface");
face3D.Layer.Color.Index = 3;
dxf.AddEntity(face3D);
//polyline
PolylineVertex polyVertex;
List<PolylineVertex> polyVertexes = new List<PolylineVertex>();
polyVertex = new PolylineVertex(new Vector2f(-50, -50));
polyVertex.BeginThickness = 2;
polyVertexes.Add(polyVertex);
polyVertex = new PolylineVertex(new Vector2f(50, -50));
polyVertex.BeginThickness = 1;
polyVertexes.Add(polyVertex);
polyVertex = new PolylineVertex(new Vector2f(50, 50));
polyVertex.Bulge = 1;
polyVertexes.Add(polyVertex);
polyVertex = new PolylineVertex(new Vector2f(-50, 50));
polyVertexes.Add(polyVertex);
Polyline polyline2d = new Polyline(polyVertexes, true);
polyline2d.Layer = new Layer("polyline2d");
polyline2d.Layer.Color.Index = 5;
polyline2d.Normal = new Vector3f(1, 1, 1);
polyline2d.Elevation = 100.0f;
dxf.AddEntity(polyline2d);
//lightweight polyline
LightWeightPolylineVertex lwVertex;
List<LightWeightPolylineVertex> lwVertexes = new List<LightWeightPolylineVertex>();
lwVertex = new LightWeightPolylineVertex(new Vector2f(-25, -25));
lwVertex.BeginThickness = 2;
lwVertexes.Add(lwVertex);
lwVertex = new LightWeightPolylineVertex(new Vector2f(25, -25));
lwVertex.BeginThickness = 1;
lwVertexes.Add(lwVertex);
lwVertex = new LightWeightPolylineVertex(new Vector2f(25, 25));
lwVertex.Bulge = 1;
lwVertexes.Add(lwVertex);
lwVertex = new LightWeightPolylineVertex(new Vector2f(-25, 25));
lwVertexes.Add(lwVertex);
LightWeightPolyline lwPolyline = new LightWeightPolyline(lwVertexes, true);
lwPolyline.Layer = new Layer("lwpolyline");
lwPolyline.Layer.Color.Index = 5;
lwPolyline.Normal = new Vector3f(1, 1, 1);
lwPolyline.Elevation = 100.0f;
dxf.AddEntity(lwPolyline);
//line
Line line = new Line(new Vector3f(0, 0, 0), new Vector3f(10, 10, 10));
line.Layer = new Layer("line");
line.Layer.Color.Index = 6;
dxf.AddEntity(line);
//3d polyline
Polyline3dVertex vertex;
List<Polyline3dVertex> vertexes = new List<Polyline3dVertex>();
vertex = new Polyline3dVertex(new Vector3f(-50, -50, 0));
vertexes.Add(vertex);
vertex = new Polyline3dVertex(new Vector3f(50, -50, 10));
vertexes.Add(vertex);
vertex = new Polyline3dVertex(new Vector3f(50, 50, 25));
vertexes.Add(vertex);
vertex = new Polyline3dVertex(new Vector3f(-50, 50, 50));
vertexes.Add(vertex);
Polyline3d polyline = new Polyline3d(vertexes, true);
polyline.Layer = new Layer("polyline3d");
polyline.Layer.Color.Index = 24;
dxf.AddEntity(polyline);
//block definition
Block block = new Block("TestBlock");
block.Entities.Add(new Line(new Vector3f(-5, -5, 5), new Vector3f(5, 5, 5)));
block.Entities.Add(new Line(new Vector3f(5, -5, 5), new Vector3f(-5, 5, 5)));
//insert
Insert insert = new Insert(block, new Vector3f(5, 5, 5));
insert.Layer = new Layer("insert");
insert.Layer.Color.Index = 4;
dxf.AddEntity(insert);
//text
TextStyle style=new TextStyle("True type font","Arial.ttf");
Text text = new Text("Hello world!", Vector3f.Zero, 10.0f,style);
text.Layer = new Layer("text");
text.Layer.Color.Index = 8;
text.Alignment = TextAlignment.TopRight;
dxf.AddEntity(text);
dxf.Save("AutoCad2007.dxf", DxfVersion.AutoCad2007);
dxf.Save("AutoCad2004.dxf", DxfVersion.AutoCad2004);
dxf.Save("AutoCad2000.dxf", DxfVersion.AutoCad2000);
dxf.Save("AutoCad12.dxf", DxfVersion.AutoCad12);
}
private void WriteFace3D(Face3d face)
{
if (this.activeSection != StringCode.EntitiesSection && !this.isBlockEntities)
{
throw new InvalidDxfSectionException(this.activeSection, this.file);
}
this.WriteCodePair(0, face.CodeName);
this.WriteCodePair(5, face.Handle);
this.WriteCodePair(100, SubclassMarker.Entity);
this.WriteEntityCommonCodes(face);
this.WriteCodePair(100, SubclassMarker.Face3d);
this.WriteCodePair(10, face.FirstVertex.X);
this.WriteCodePair(20, face.FirstVertex.Y);
this.WriteCodePair(30, face.FirstVertex.Z);
this.WriteCodePair(11, face.SecondVertex.X);
this.WriteCodePair(21, face.SecondVertex.Y);
this.WriteCodePair(31, face.SecondVertex.Z);
this.WriteCodePair(12, face.ThirdVertex.X);
this.WriteCodePair(22, face.ThirdVertex.Y);
this.WriteCodePair(32, face.ThirdVertex.Z);
this.WriteCodePair(13, face.FourthVertex.X);
this.WriteCodePair(23, face.FourthVertex.Y);
this.WriteCodePair(33, face.FourthVertex.Z);
this.WriteCodePair(70, Convert.ToInt32(face.EdgeFlags));
this.WriteXData(face.XData);
}