private MemoryStream GetBitmapAsStream(WIC.Bitmap wicBitmap)
{
int width = wicBitmap.Size.Width;
int height = wicBitmap.Size.Height;
var ms = new MemoryStream();
using (var stream = new WIC.WICStream(
this.WicFactory,
ms))
{
using (var encoder = new WIC.PngBitmapEncoder(WicFactory))
{
encoder.Initialize(stream);
using (var frameEncoder = new WIC.BitmapFrameEncode(encoder))
{
frameEncoder.Initialize();
frameEncoder.SetSize(width, height);
var format = WIC.PixelFormat.Format32bppBGRA;
frameEncoder.SetPixelFormat(ref format);
frameEncoder.WriteSource(wicBitmap);
frameEncoder.Commit();
}
encoder.Commit();
}
}
ms.Position = 0;
return(ms);
}
static void over()
{
var inputPath = "Input.png";
var outputPath = "output.png";
// 그래픽을 랜더링할 장비를 추가 - 3D or 2D
var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware,
d3d.DeviceCreationFlags.VideoSupport
| d3d.DeviceCreationFlags.BgraSupport
| d3d.DeviceCreationFlags.None);
var d3dDevice = defaultDevice.QueryInterface <d3d.Device1>(); //get a refer to the D3D 11.1 device
var dxgiDevice = d3dDevice.QueryInterface <dxgi.Device1>(); //get a refer to the DXGI device
var d2dDevice = new d2.Device(dxgiDevice);
// DeviceContext를 초기화. D2D 렌더링 타겟이 될 것이고 모든 렌더링 작업을 허용
var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None);
var dwFactory = new dw.Factory();
//D2D, WIC 둘 다 지원되는 픽셀 형식 지정
var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied);
//RGBA형식 사용
var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA;
//이미지 로딩
var imagingFactory = new wic.ImagingFactory2();
var decoder = new wic.PngBitmapDecoder(imagingFactory);
var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read);
decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad);
//다이렉트2D가 사용할수 있도록 디코딩
var formatConverter = new wic.FormatConverter(imagingFactory);
formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat);
//기본 이미지를 D2D이미지로 로드
//var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat));
//이미지 크기 저장
var inputImageSize = formatConverter.Size;
var pixelWidth = inputImageSize.Width;
var pixelHeight = inputImageSize.Height;
//Effect1 : BitpmapSource - 디코딩된 이미지 데이터를 가져오고 BitmapSource 가져오기
var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext);
bitmapSourceEffect.WicBitmapSource = formatConverter;
// Effect 2 : GaussianBlur - bitmapsource에 가우시안블러 효과 적용
var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext);
gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true);
gaussianBlurEffect.StandardDeviation = 5f;
//overlay text setup
var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f);
//draw a long text to show the automatic line wrapping
var textToDraw = "sime ling text..." + "text" + "dddd";
//create the text layout - this imroves the drawing performance for static text
// as the glyph positions are precalculated
//윤곽선 글꼴 데이터에서 글자 하나의 모양에 대한 기본 단위를 글리프(glyph)라고 한다
var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f);
SharpDX.Mathematics.Interop.RawColor4 color = new SharpDX.Mathematics.Interop.RawColor4(255, 255, 255, 1);
var textBrush = new d2.SolidColorBrush(d2dContext, color);
//여기서부터 다시
//render target setup
//create the d2d bitmap description using default flags and 96 DPI
var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw);
//the render target
var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps);
d2dContext.Target = d2dRenderTarget; //associate bitmap with the d2d context
//Drawing
//slow preparations - fast drawing
d2dContext.BeginDraw();
d2dContext.DrawImage(gaussianBlurEffect, new SharpDX.Mathematics.Interop.RawVector2(100f, 100f));
d2dContext.DrawTextLayout(new SharpDX.Mathematics.Interop.RawVector2(50f, 50f), textLayout, textBrush);
d2dContext.EndDraw();
//Image save
//delete the output file if it already exists
if (System.IO.File.Exists(outputPath))
{
System.IO.File.Delete(outputPath);
}
//use the appropiate overload to write either to tream or to a file
var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write);
//select the image encoding format HERE
var encoder = new wic.PngBitmapEncoder(imagingFactory);
encoder.Initialize(stream);
var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder);
bitmapFrameEncode.Initialize();
bitmapFrameEncode.SetSize(pixelWidth, pixelHeight);
bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat);
//this is the trick to write d2d1 bitmap to WIC
var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice);
imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight));
bitmapFrameEncode.Commit();
encoder.Commit();
//cleanup
//dispose everything and free used resources
bitmapFrameEncode.Dispose();
encoder.Dispose();
stream.Dispose();
textBrush.Dispose();
textLayout.Dispose();
textFormat.Dispose();
formatConverter.Dispose();
//gaussianBlurEffect.Dispose();
bitmapSourceEffect.Dispose();
d2dRenderTarget.Dispose();
inputStream.Dispose();
decoder.Dispose();
d2dContext.Dispose();
dwFactory.Dispose();
imagingFactory.Dispose();
d2dDevice.Dispose();
dxgiDevice.Dispose();
d3dDevice.Dispose();
defaultDevice.Dispose();
//save
System.Diagnostics.Process.Start(outputPath);
}
public System.Drawing.Bitmap TextToBitmap(string text, out Size2F size, RawColor4 bgcolor, d2.TextAntialiasMode aamode, int maxWidth = 1000, int maxHeight = 1000)
{
var sz = GetTextSize(text, maxWidth, maxHeight);
int pixelWidth = (int)(sz.Width * 2);
int pixelHeight = (int)(sz.Height * 2);
var d2dRenderTarget = new Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps);
if (d2dContext.Target != null)
{
d2dContext.Target.Dispose();
}
d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context
// Draw Text
TextLayout textLayout = new TextLayout(dwFactory, text, textFormat, pixelWidth, pixelHeight);
//d2dContext.TextRenderingParams = new RenderingParams(dwFactory, 1, 0, 0, PixelGeometry.Flat, renderingMode);
d2dContext.TextAntialiasMode = aamode;
d2dContext.BeginDraw();
d2dContext.Clear(bgcolor);
d2dContext.DrawTextLayout(new RawVector2(0, 0), textLayout, textBrush, DrawTextOptions.EnableColorFont);
d2dContext.EndDraw();
size = new Size2F(textLayout.Metrics.Width, textLayout.Metrics.Height);
textLayout.Dispose();
// Copy to MemoryStream
var stream = new MemoryStream();
var encoder = new wic.PngBitmapEncoder(imagingFactory);
encoder.Initialize(stream);
var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder);
bitmapFrameEncode.Initialize();
bitmapFrameEncode.SetSize(pixelWidth, pixelHeight);
bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat);
// this is the trick to write D2D1 bitmap to WIC
var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice);
var imageParam = new wic.ImageParameters(d2PixelFormat, dpi, dpi, 0, 0, pixelWidth, pixelHeight);
imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, imageParam);
bitmapFrameEncode.Commit();
encoder.Commit();
imageEncoder.Dispose();
encoder.Dispose();
bitmapFrameEncode.Dispose();
d2dRenderTarget.Dispose();
// Convert To Bitmap
byte[] data = stream.ToArray();
stream.Seek(0, SeekOrigin.Begin);
var bmp = new System.Drawing.Bitmap(stream);
stream.Dispose();
return(bmp);
}
public void Save(string fileName)
{
if (Path.GetExtension(fileName) != ".png")
{
// Yeah, we need to support other formats.
throw new NotSupportedException("Use PNG, stoopid.");
}
using (FileStream s = new FileStream(fileName, FileMode.Create))
{
PngBitmapEncoder encoder = new PngBitmapEncoder(this.factory);
encoder.Initialize(s);
BitmapFrameEncode frame = new BitmapFrameEncode(encoder);
frame.Initialize();
frame.WriteSource(this.WicImpl);
frame.Commit();
encoder.Commit();
}
}
static void Main()
{
// input and output files are supposed to be in the program folder
var inputPath = "Input.png";
var outputPath = "Output.png";
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// INITIALIZATION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// initialize the D3D device which will allow to render to image any graphics - 3D or 2D
var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware,
d3d.DeviceCreationFlags.VideoSupport
| d3d.DeviceCreationFlags.BgraSupport
| d3d.DeviceCreationFlags.Debug); // take out the Debug flag for better performance
var d3dDevice = defaultDevice.QueryInterface <d3d.Device1>(); // get a reference to the Direct3D 11.1 device
var dxgiDevice = d3dDevice.QueryInterface <dxgi.Device>(); // get a reference to DXGI device
var d2dDevice = new d2.Device(dxgiDevice); // initialize the D2D device
var imagingFactory = new wic.ImagingFactory2(); // initialize the WIC factory
// initialize the DeviceContext - it will be the D2D render target and will allow all rendering operations
var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None);
var dwFactory = new dw.Factory();
// specify a pixel format that is supported by both D2D and WIC
var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied);
// if in D2D was specified an R-G-B-A format - use the same for wic
var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// IMAGE LOADING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
var decoder = new wic.PngBitmapDecoder(imagingFactory); // we will load a PNG image
var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read); // open the image file for reading
decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad);
// decode the loaded image to a format that can be consumed by D2D
var formatConverter = new wic.FormatConverter(imagingFactory);
formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat);
// load the base image into a D2D Bitmap
//var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat));
// store the image size - output will be of the same size
var inputImageSize = formatConverter.Size;
var pixelWidth = inputImageSize.Width;
var pixelHeight = inputImageSize.Height;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// EFFECT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Effect 1 : BitmapSource - take decoded image data and get a BitmapSource from it
var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext);
bitmapSourceEffect.WicBitmapSource = formatConverter;
// Effect 2 : GaussianBlur - give the bitmapsource a gaussian blurred effect
var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext);
gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true);
gaussianBlurEffect.StandardDeviation = 5f;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// OVERLAY TEXT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f); // create the text format of specified font configuration
// draw a long text to show the automatic line wrapping
var textToDraw = "Some long text to show the drawing of preformatted "
+ "glyphs using DirectWrite on the Direct2D surface."
+ " Notice the automatic wrapping of line if it exceeds desired width.";
// create the text layout - this improves the drawing performance for static text
// as the glyph positions are precalculated
var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f);
var textBrush = new d2.SolidColorBrush(d2dContext, Color.LightGreen);
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// RENDER TARGET SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// create the d2d bitmap description using default flags (from SharpDX samples) and 96 DPI
var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw);
// the render target
var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps);
d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// DRAWING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// slow preparations - fast drawing:
d2dContext.BeginDraw();
d2dContext.DrawImage(gaussianBlurEffect);
d2dContext.DrawTextLayout(new Vector2(5f, 5f), textLayout, textBrush);
d2dContext.EndDraw();
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// IMAGE SAVING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// delete the output file if it already exists
if (System.IO.File.Exists(outputPath))
{
System.IO.File.Delete(outputPath);
}
// use the appropiate overload to write either to stream or to a file
var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write);
// select the image encoding format HERE
var encoder = new wic.PngBitmapEncoder(imagingFactory);
encoder.Initialize(stream);
var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder);
bitmapFrameEncode.Initialize();
bitmapFrameEncode.SetSize(pixelWidth, pixelHeight);
bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat);
// this is the trick to write D2D1 bitmap to WIC
var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice);
imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight));
bitmapFrameEncode.Commit();
encoder.Commit();
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CLEANUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// dispose everything and free used resources
bitmapFrameEncode.Dispose();
encoder.Dispose();
stream.Dispose();
textBrush.Dispose();
textLayout.Dispose();
textFormat.Dispose();
formatConverter.Dispose();
gaussianBlurEffect.Dispose();
bitmapSourceEffect.Dispose();
d2dRenderTarget.Dispose();
inputStream.Dispose();
decoder.Dispose();
d2dContext.Dispose();
dwFactory.Dispose();
imagingFactory.Dispose();
d2dDevice.Dispose();
dxgiDevice.Dispose();
d3dDevice.Dispose();
defaultDevice.Dispose();
// show the result
System.Diagnostics.Process.Start(outputPath);
}
public MemoryStream RenderToPngStream(FrameworkElement fe)
{
var width = (int)Math.Ceiling(fe.ActualWidth);
var height = (int)Math.Ceiling(fe.ActualHeight);
// pixel format with transparency/alpha channel and RGB values premultiplied by alpha
var pixelFormat = WIC.PixelFormat.Format32bppPRGBA;
// pixel format without transparency, but one that works with Cleartype antialiasing
//var pixelFormat = WicPixelFormat.Format32bppBGR;
var wicBitmap = new WIC.Bitmap(
this.WicFactory,
width,
height,
pixelFormat,
WIC.BitmapCreateCacheOption.CacheOnLoad);
var renderTargetProperties = new D2D.RenderTargetProperties(
D2D.RenderTargetType.Default,
new D2D.PixelFormat(Format.R8G8B8A8_UNorm, D2D.AlphaMode.Premultiplied),
//new D2DPixelFormat(Format.Unknown, AlphaMode.Unknown), // use this for non-alpha, cleartype antialiased text
0,
0,
D2D.RenderTargetUsage.None,
D2D.FeatureLevel.Level_DEFAULT);
var renderTarget = new D2D.WicRenderTarget(
this.D2DFactory,
wicBitmap,
renderTargetProperties)
{
//TextAntialiasMode = TextAntialiasMode.Cleartype // this only works with the pixel format with no alpha channel
TextAntialiasMode = D2D.TextAntialiasMode.Grayscale // this is the best we can do for bitmaps with alpha channels
};
Compose(renderTarget, fe);
// TODO: There is no need to encode the bitmap to PNG - we could just copy the texture pixel buffer to a WriteableBitmap pixel buffer.
var ms = new MemoryStream();
var stream = new WIC.WICStream(
this.WicFactory,
ms);
var encoder = new WIC.PngBitmapEncoder(WicFactory);
encoder.Initialize(stream);
var frameEncoder = new WIC.BitmapFrameEncode(encoder);
frameEncoder.Initialize();
frameEncoder.SetSize(width, height);
var format = WIC.PixelFormat.Format32bppBGRA;
//var format = WicPixelFormat.FormatDontCare;
frameEncoder.SetPixelFormat(ref format);
frameEncoder.WriteSource(wicBitmap);
frameEncoder.Commit();
encoder.Commit();
frameEncoder.Dispose();
encoder.Dispose();
stream.Dispose();
ms.Position = 0;
return(ms);
}
static void Main()
{
// input and output files are supposed to be in the program folder
var inputPath = "Input.png";
var outputPath = "Output.png";
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// INITIALIZATION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// initialize the D3D device which will allow to render to image any graphics - 3D or 2D
var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware,
d3d.DeviceCreationFlags.VideoSupport
| d3d.DeviceCreationFlags.BgraSupport
| d3d.DeviceCreationFlags.Debug); // take out the Debug flag for better performance
var d3dDevice = defaultDevice.QueryInterface<d3d.Device1>(); // get a reference to the Direct3D 11.1 device
var dxgiDevice = d3dDevice.QueryInterface<dxgi.Device>(); // get a reference to DXGI device
var d2dDevice = new d2.Device(dxgiDevice); // initialize the D2D device
var imagingFactory = new wic.ImagingFactory2(); // initialize the WIC factory
// initialize the DeviceContext - it will be the D2D render target and will allow all rendering operations
var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None);
var dwFactory = new dw.Factory();
// specify a pixel format that is supported by both D2D and WIC
var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied);
// if in D2D was specified an R-G-B-A format - use the same for wic
var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// IMAGE LOADING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
var decoder = new wic.PngBitmapDecoder(imagingFactory); // we will load a PNG image
var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read); // open the image file for reading
decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad);
// decode the loaded image to a format that can be consumed by D2D
var formatConverter = new wic.FormatConverter(imagingFactory);
formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat);
// load the base image into a D2D Bitmap
//var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat));
// store the image size - output will be of the same size
var inputImageSize = formatConverter.Size;
var pixelWidth = inputImageSize.Width;
var pixelHeight = inputImageSize.Height;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// EFFECT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Effect 1 : BitmapSource - take decoded image data and get a BitmapSource from it
var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext);
bitmapSourceEffect.WicBitmapSource = formatConverter;
// Effect 2 : GaussianBlur - give the bitmapsource a gaussian blurred effect
var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext);
gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true);
gaussianBlurEffect.StandardDeviation = 5f;
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// OVERLAY TEXT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f); // create the text format of specified font configuration
// draw a long text to show the automatic line wrapping
var textToDraw = "Some long text to show the drawing of preformatted "
+ "glyphs using DirectWrite on the Direct2D surface."
+ " Notice the automatic wrapping of line if it exceeds desired width.";
// create the text layout - this improves the drawing performance for static text
// as the glyph positions are precalculated
var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f);
var textBrush = new d2.SolidColorBrush(d2dContext, Color.LightGreen);
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// RENDER TARGET SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// create the d2d bitmap description using default flags (from SharpDX samples) and 96 DPI
var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw);
// the render target
var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps);
d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// DRAWING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// slow preparations - fast drawing:
d2dContext.BeginDraw();
d2dContext.DrawImage(gaussianBlurEffect);
d2dContext.DrawTextLayout(new Vector2(5f, 5f), textLayout, textBrush);
d2dContext.EndDraw();
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// IMAGE SAVING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// delete the output file if it already exists
if (System.IO.File.Exists(outputPath)) System.IO.File.Delete(outputPath);
// use the appropiate overload to write either to stream or to a file
var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write);
// select the image encoding format HERE
var encoder = new wic.PngBitmapEncoder(imagingFactory);
encoder.Initialize(stream);
var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder);
bitmapFrameEncode.Initialize();
bitmapFrameEncode.SetSize(pixelWidth, pixelHeight);
bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat);
// this is the trick to write D2D1 bitmap to WIC
var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice);
imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight));
bitmapFrameEncode.Commit();
encoder.Commit();
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// CLEANUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// dispose everything and free used resources
bitmapFrameEncode.Dispose();
encoder.Dispose();
stream.Dispose();
textBrush.Dispose();
textLayout.Dispose();
textFormat.Dispose();
formatConverter.Dispose();
gaussianBlurEffect.Dispose();
bitmapSourceEffect.Dispose();
d2dRenderTarget.Dispose();
inputStream.Dispose();
decoder.Dispose();
d2dContext.Dispose();
dwFactory.Dispose();
imagingFactory.Dispose();
d2dDevice.Dispose();
dxgiDevice.Dispose();
d3dDevice.Dispose();
defaultDevice.Dispose();
// show the result
System.Diagnostics.Process.Start(outputPath);
}
public void Save(Stream stream)
{
PngBitmapEncoder encoder = new PngBitmapEncoder(_factory);
encoder.Initialize(stream);
BitmapFrameEncode frame = new BitmapFrameEncode(encoder);
frame.Initialize();
frame.WriteSource(WicImpl);
frame.Commit();
encoder.Commit();
}
/// <summary>
/// 将 Direct2D 位图保存到文件中。
/// </summary>
/// <param name="image">要保存的位图。</param>
/// <param name="fileName">要保存的文件名。</param>
public void SaveBitmapToFile(Bitmap image, string fileName)
{
using (ImagingFactory2 factory = new ImagingFactory2())
{
using (WICStream stream = new WICStream(factory, fileName, NativeFileAccess.Write))
{
using (BitmapEncoder encoder = new PngBitmapEncoder(factory))
{
encoder.Initialize(stream);
using (BitmapFrameEncode bitmapFrameEncode = new BitmapFrameEncode(encoder))
{
bitmapFrameEncode.Initialize();
int width = image.PixelSize.Width;
int height = image.PixelSize.Height;
bitmapFrameEncode.SetSize(width, height);
Guid wicPixelFormat = WICPixelFormat;
bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat);
using (ImageEncoder imageEncoder = new ImageEncoder(factory, this.d2DDevice))
{
imageEncoder.WriteFrame(image, bitmapFrameEncode,
new ImageParameters(D2PixelFormat, 96, 96, 0, 0, width, height));
bitmapFrameEncode.Commit();
encoder.Commit();
}
}
}
}
}
}
//
// http://stackoverflow.com/questions/9151615/how-does-one-use-a-memory-stream-instead-of-files-when-rendering-direct2d-images
//
// Identical to above SO question, except that we are rendering to MemoryStream because it was added to the API
//
private MemoryStream RenderStaticTextToBitmap()
{
var width = 400;
var height = 100;
var pixelFormat = WicPixelFormat.Format32bppBGR;
var wicFactory = new ImagingFactory();
var dddFactory = new SharpDX.Direct2D1.Factory();
var dwFactory = new SharpDX.DirectWrite.Factory();
var wicBitmap = new Bitmap(
wicFactory,
width,
height,
pixelFormat,
BitmapCreateCacheOption.CacheOnLoad);
var renderTargetProperties = new RenderTargetProperties(
RenderTargetType.Default,
new D2DPixelFormat(Format.Unknown, AlphaMode.Unknown),
0,
0,
RenderTargetUsage.None,
FeatureLevel.Level_DEFAULT);
var renderTarget = new WicRenderTarget(
dddFactory,
wicBitmap,
renderTargetProperties)
{
TextAntialiasMode = TextAntialiasMode.Cleartype
};
renderTarget.BeginDraw();
var textFormat = new TextFormat(dwFactory, "Consolas", 48)
{
TextAlignment = SharpDX.DirectWrite.TextAlignment.Center,
ParagraphAlignment = ParagraphAlignment.Center
};
var textBrush = new SharpDX.Direct2D1.SolidColorBrush(
renderTarget,
SharpDX.Colors.Blue);
renderTarget.Clear(Colors.White);
renderTarget.DrawText(
"Hi, mom!",
textFormat,
new RectangleF(0, 0, width, height),
textBrush);
renderTarget.EndDraw();
var ms = new MemoryStream();
var stream = new WICStream(
wicFactory,
ms);
var encoder = new PngBitmapEncoder(wicFactory);
encoder.Initialize(stream);
var frameEncoder = new BitmapFrameEncode(encoder);
frameEncoder.Initialize();
frameEncoder.SetSize(width, height);
frameEncoder.PixelFormat = WicPixelFormat.FormatDontCare;
frameEncoder.WriteSource(wicBitmap);
frameEncoder.Commit();
encoder.Commit();
frameEncoder.Dispose();
encoder.Dispose();
stream.Dispose();
ms.Position = 0;
return ms;
}
private MemoryStream GetBitmapAsStream(WIC.Bitmap wicBitmap)
{
int width = wicBitmap.Size.Width;
int height = wicBitmap.Size.Height;
var ms = new MemoryStream();
using (var stream = new WIC.WICStream(
this.WicFactory,
ms))
{
using (var encoder = new WIC.PngBitmapEncoder(WicFactory))
{
encoder.Initialize(stream);
using (var frameEncoder = new WIC.BitmapFrameEncode(encoder))
{
frameEncoder.Initialize();
frameEncoder.SetSize(width, height);
var format = WIC.PixelFormat.Format32bppBGRA;
frameEncoder.SetPixelFormat(ref format);
frameEncoder.WriteSource(wicBitmap);
frameEncoder.Commit();
}
encoder.Commit();
}
}
ms.Position = 0;
return ms;
}
public MemoryStream RenderToPngStream(FrameworkElement fe)
{
var width = (int)Math.Ceiling(fe.ActualWidth);
var height = (int)Math.Ceiling(fe.ActualHeight);
// pixel format with transparency/alpha channel and RGB values premultiplied by alpha
var pixelFormat = WIC.PixelFormat.Format32bppPRGBA;
// pixel format without transparency, but one that works with Cleartype antialiasing
//var pixelFormat = WicPixelFormat.Format32bppBGR;
var wicBitmap = new WIC.Bitmap(
this.WicFactory,
width,
height,
pixelFormat,
WIC.BitmapCreateCacheOption.CacheOnLoad);
var renderTargetProperties = new D2D.RenderTargetProperties(
D2D.RenderTargetType.Default,
new D2D.PixelFormat(Format.R8G8B8A8_UNorm, D2D.AlphaMode.Premultiplied),
//new D2DPixelFormat(Format.Unknown, AlphaMode.Unknown), // use this for non-alpha, cleartype antialiased text
0,
0,
D2D.RenderTargetUsage.None,
D2D.FeatureLevel.Level_DEFAULT);
var renderTarget = new D2D.WicRenderTarget(
this.D2DFactory,
wicBitmap,
renderTargetProperties)
{
//TextAntialiasMode = TextAntialiasMode.Cleartype // this only works with the pixel format with no alpha channel
TextAntialiasMode = D2D.TextAntialiasMode.Grayscale // this is the best we can do for bitmaps with alpha channels
};
Compose(renderTarget, fe);
// TODO: There is no need to encode the bitmap to PNG - we could just copy the texture pixel buffer to a WriteableBitmap pixel buffer.
var ms = new MemoryStream();
var stream = new WIC.WICStream(
this.WicFactory,
ms);
var encoder = new WIC.PngBitmapEncoder(WicFactory);
encoder.Initialize(stream);
var frameEncoder = new WIC.BitmapFrameEncode(encoder);
frameEncoder.Initialize();
frameEncoder.SetSize(width, height);
var format = WIC.PixelFormat.Format32bppBGRA;
//var format = WicPixelFormat.FormatDontCare;
frameEncoder.SetPixelFormat(ref format);
frameEncoder.WriteSource(wicBitmap);
frameEncoder.Commit();
encoder.Commit();
frameEncoder.Dispose();
encoder.Dispose();
stream.Dispose();
ms.Position = 0;
return ms;
}
public static byte[] CreatePngImage(int width, int height, string text,
float fontSize = 30.0f,
string font = "Times New Roman",
int lineCount = 5,
bool rotation = false,
float turbulenceAmount = 60.0f)
{
using (var wic = new WIC.ImagingFactory2())
using (var d2d = new D2D.Factory())
using (var wicBitmap = new WIC.Bitmap(wic, width, height, WIC.PixelFormat.Format32bppPBGRA, WIC.BitmapCreateCacheOption.CacheOnDemand))
using (var target = new D2D.WicRenderTarget(d2d, wicBitmap, new D2D.RenderTargetProperties()))
using (var dwriteFactory = new DWrite.Factory())
using (var brush = new D2D.SolidColorBrush(target, Color.Yellow))
using (var encoder = new WIC.PngBitmapEncoder(wic))
using (var ms = new MemoryStream())
using (var dc = target.QueryInterface <D2D.DeviceContext>())
using (var bmpLayer = new D2D.Bitmap1(dc, target.PixelSize,
new D2D.BitmapProperties1(new D2D.PixelFormat(SharpDX.DXGI.Format.B8G8R8A8_UNorm, D2D.AlphaMode.Premultiplied),
d2d.DesktopDpi.Width, d2d.DesktopDpi.Height,
D2D.BitmapOptions.Target)))
{
var r = new Random();
encoder.Initialize(ms);
D2D.Image oldTarget = dc.Target;
{
dc.Target = bmpLayer;
dc.BeginDraw();
var textFormat = new DWrite.TextFormat(dwriteFactory, font, fontSize);
for (int charIndex = 0; charIndex < text.Length; ++charIndex)
{
using (var layout = new DWrite.TextLayout(dwriteFactory, text[charIndex].ToString(), textFormat, float.MaxValue, float.MaxValue))
{
var layoutSize = new Vector2(layout.Metrics.Width, layout.Metrics.Height);
using (var b2 = new D2D.LinearGradientBrush(dc, new D2D.LinearGradientBrushProperties
{
StartPoint = Vector2.Zero,
EndPoint = layoutSize,
}, new D2D.GradientStopCollection(dc, new[]
{
new D2D.GradientStop {
Position = 0.0f, Color = ColorFromHsl(r.NextFloat(0, 1), 1.0f, 0.8f)
},
new D2D.GradientStop {
Position = 1.0f, Color = ColorFromHsl(r.NextFloat(0, 1), 1.0f, 0.8f)
},
})))
{
var position = new Vector2(charIndex * width / text.Length, r.NextFloat(0, height - layout.Metrics.Height));
dc.Transform =
Matrix3x2.Translation(-layoutSize / 2) *
Matrix3x2.Skew(r.NextFloat(0, 0.5f), r.NextFloat(0, 0.5f)) *
(rotation ? Matrix3x2.Rotation(r.NextFloat(0, (float)(Math.PI * 2))) : Matrix3x2.Identity) *
Matrix3x2.Translation(position + layoutSize / 2);
dc.DrawTextLayout(Vector2.Zero, layout, b2);
}
}
}
for (var i = 0; i < lineCount; ++i)
{
target.Transform = Matrix3x2.Identity;
brush.Color = ColorFromHsl(r.NextFloat(0, 1), 1.0f, 0.3f);
target.DrawLine(
r.NextVector2(Vector2.Zero, new Vector2(width, height)),
r.NextVector2(Vector2.Zero, new Vector2(width, height)),
brush, 3.0f);
}
target.EndDraw();
}
Color background = ColorFromHsl(r.NextFloat(0, 1), 1.0f, 0.3f);
{
dc.Target = null;
using (var displacement = new D2D.Effects.DisplacementMap(dc))
{
displacement.SetInput(0, bmpLayer, true);
displacement.Scale = turbulenceAmount;
var turbulence = new D2D.Effects.Turbulence(dc);
displacement.SetInputEffect(1, turbulence);
dc.Target = oldTarget;
dc.BeginDraw();
dc.Clear(background);
dc.DrawImage(displacement);
dc.EndDraw();
using (var frame = new WIC.BitmapFrameEncode(encoder))
{
frame.Initialize();
frame.SetSize(wicBitmap.Size.Width, wicBitmap.Size.Height);
var pixelFormat = wicBitmap.PixelFormat;
frame.SetPixelFormat(ref pixelFormat);
frame.WriteSource(wicBitmap);
frame.Commit();
}
}
}
encoder.Commit();
return(ms.ToArray());
}
}
public void Start()
{
if (ProcessStarted != null)
ProcessStarted();
int index = 0;
var rendererUtil = new RendererUtil();
// obtain file list
var regionList = Directory.GetFiles(Path.Combine(worldLocation, "region"), "*.mca").ToList();
var regionEntries = new List<RegionEntry>();
foreach (string region in regionList)
{
try
{
// load the region
using (RegionFile regionFile = RegionFile.OpenRegion(File.OpenRead(region)))
{
var renderedChunks = new List<ChunkEntry>();
if (RegionLoaded != null)
RegionLoaded(regionFile);
Debug.WriteLine("Rendering region");
DateTime sTime = DateTime.Now;
#region Chunk render
using (var renderTarget = new BitmapRenderTarget(rendererUtil.D2DDeviceContext, CompatibleRenderTargetOptions.None, new DrawingSizeF(16, 16), new DrawingSize(16, 16), new PixelFormat(Format.R8G8B8A8_UNorm, AlphaMode.Premultiplied)))
{
foreach (var anvilChunk in regionFile.Content.Select(chunk => new Anvil(chunk)))
{
ChunkEntry entry;
RenderSegment(anvilChunk, renderTarget, out entry);
renderedChunks.Add(entry);
}
}
#endregion
#region Region compositor
using (var renderTarget = new BitmapRenderTarget(rendererUtil.D2DDeviceContext, CompatibleRenderTargetOptions.None, new DrawingSizeF(512, 512), new DrawingSize(512, 512), new PixelFormat(Format.R8G8B8A8_UNorm, AlphaMode.Premultiplied)))
{
renderTarget.BeginDraw();
renderTarget.Clear(Color.Transparent);
// compose the images
foreach (ChunkEntry chunk in renderedChunks)
{
int cxPos = chunk.XPos % 32;
int czPos = chunk.ZPos % 32;
if (cxPos < 0)
cxPos = 32 + cxPos;
if (czPos < 0)
czPos = 32 + czPos;
int xPos = cxPos * 16;
int zPos = czPos * 16;
renderTarget.Transform = Matrix3x2.Translation(xPos, zPos);
renderTarget.DrawBitmap(chunk.RenderedChunk, 1, BitmapInterpolationMode.Linear);
}
// ReSharper disable PossibleNullReferenceException
string[] info = Path.GetFileNameWithoutExtension(region).Split('.');
// ReSharper restore PossibleNullReferenceException
regionEntries.Add(new RegionEntry
{
RenderedRegion = renderTarget.Bitmap,
XPos = Convert.ToInt32(info[1]),
ZPos = Convert.ToInt32(info[2])
});
renderTarget.EndDraw();
}
#endregion
Debug.WriteLine("Render time is: " + (DateTime.Now - sTime).Seconds + " seconds.");
if (RegionRendered != null)
RegionRendered();
#region Cleanup
foreach (ChunkEntry chunk in renderedChunks)
chunk.RenderedChunk.Dispose();
renderedChunks.Clear();
#endregion
}
}
catch (Exception exception)
{
if (ProcessFailed != null)
ProcessFailed(exception.Message + "\nAt:\n" + exception);
}
if (ProgressChanged != null)
ProgressChanged(++index / (float)regionList.Count);
}
#region Extrema processor
int xMin = 0;
int zMin = 0;
int xMax = 0;
int zMax = 0;
foreach (RegionEntry entry in regionEntries)
{
if (xMin > entry.XPos)
xMin = entry.XPos;
if (xMax < entry.XPos)
xMax = entry.XPos;
if (zMin > entry.ZPos)
zMin = entry.ZPos;
if (zMax < entry.ZPos)
zMax = entry.ZPos;
}
int wSizeX = (xMax - xMin) * 512 + 512;
int wSizeZ = (zMax - zMin) * 512 + 512;
xMin = Math.Abs(xMin);
zMin = Math.Abs(zMin);
#endregion
#region World compositor
var ResultingBitmap = new Bitmap1(rendererUtil.D2DDeviceContext,
new DrawingSize(wSizeX, wSizeZ),
new BitmapProperties1
{
BitmapOptions = BitmapOptions.Target,
PixelFormat = new PixelFormat(Format.R8G8B8A8_UNorm, AlphaMode.Premultiplied)
});
rendererUtil.D2DDeviceContext.Target = ResultingBitmap;
rendererUtil.D2DDeviceContext.BeginDraw();
rendererUtil.D2DDeviceContext.Clear(Color.Transparent);
foreach (RegionEntry entry in regionEntries)
{
int xPos = ((xMin + entry.XPos) * 512);
int zPos = ((zMin + entry.ZPos) * 512);
rendererUtil.D2DDeviceContext.Transform = Matrix3x2.Translation(xPos, zPos);
rendererUtil.D2DDeviceContext.DrawBitmap(entry.RenderedRegion, 1, BitmapInterpolationMode.Linear);
}
rendererUtil.D2DDeviceContext.EndDraw();
#endregion
#region File save
FileStream file = File.OpenWrite(Path.GetFileName(worldLocation) + ".png");
var encoder = new PngBitmapEncoder(rendererUtil.ImagingFactory);
encoder.Initialize(file);
var frameEncode = new BitmapFrameEncode(encoder);
frameEncode.Initialize();
var imageEncoder = new ImageEncoder(rendererUtil.ImagingFactory, rendererUtil.D2DDevice);
imageEncoder.WriteFrame(ResultingBitmap,
frameEncode,
new ImageParameters(
new PixelFormat(Format.R8G8B8A8_UNorm, AlphaMode.Premultiplied),
96,
96,
0,
0,
wSizeX,
wSizeZ));
frameEncode.Commit();
encoder.Commit();
#endregion
#region Cleanup
file.Close();
file.Dispose();
foreach (RegionEntry bitmap in regionEntries)
{
bitmap.RenderedRegion.Dispose();
}
regionEntries.Clear();
rendererUtil.Dispose();
theBlocks.Dispose();
ResultingBitmap.Dispose();
#endregion
if (ProcessComplete != null)
ProcessComplete();
}