private void ReadPolyLineZ(Byte[] dataStream, int streamPosition)
{
var pl = new PolyLineZ();
pl.BoundingBox = new Double[4];
pl.BoundingBox[0] = ReadDoubleLittleEndian(dataStream, streamPosition);
pl.BoundingBox[1] = ReadDoubleLittleEndian(dataStream, streamPosition + 8);
pl.BoundingBox[2] = ReadDoubleLittleEndian(dataStream, streamPosition + 16);
pl.BoundingBox[3] = ReadDoubleLittleEndian(dataStream, streamPosition + 24);
var numberOfParts = ReadIntLittleEndian(dataStream, streamPosition + 32);
var numberOfPoints = ReadIntLittleEndian(dataStream, streamPosition + 36);
pl.Lines = new LineZ[numberOfParts];
var parts = new int[numberOfParts];
var pos = streamPosition + 40;
for (var i = 1; i < numberOfParts; i++)
{
parts[i - 1] = ReadIntLittleEndian(dataStream, pos + (i * 4)) - 1;
}
parts[numberOfParts - 1] = numberOfPoints - 1;
pos = pos + 4 * numberOfParts;
var z = 0;
int lineEndsAt;
var ln = new LineZ();
var pts = new List<PointZ>();
for (var i = 0; i < numberOfPoints; i++)
{
lineEndsAt = parts[z];
if (i == lineEndsAt)
{
// End of line, add the last point and wrap up
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
pts.Add(p);
ln.Points = pts.ToArray();
pts.Clear();
pl.Lines[z] = ln;
ln = new LineZ();
if (z < numberOfParts - 1) z++;
}
else
{
// Keep adding the points
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
pts.Add(p);
}
}
pos = pos + numberOfPoints * 16;
pl.ZMin = ReadDoubleLittleEndian(dataStream, pos);
pl.ZMax = ReadDoubleLittleEndian(dataStream, pos + 8);
var pointIndex = 0;
for (var i = 0; i < pl.Lines.Length; i++)
{
for (var k = 0; k < pl.Lines[i].Points.Length; k++)
{
pl.Lines[i].Points[k].Z = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
pos = pos + 16 + numberOfPoints * 8;
pl.MMin = ReadDoubleLittleEndian(dataStream, pos);
pl.MMax = ReadDoubleLittleEndian(dataStream, pos + 8);
pointIndex = 0;
for (var i = 0; i < pl.Lines.Length; i++)
{
for (var k = 0; k < pl.Lines[i].Points.Length; k++)
{
pl.Lines[i].Points[k].M = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
Shapes.Add(pl);
}
private void ReadPointZ(Byte[] dataStream, int streamPosition)
{
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, streamPosition);
p.Y = ReadDoubleLittleEndian(dataStream, streamPosition + 8);
p.Z = ReadDoubleLittleEndian(dataStream, streamPosition + 16);
p.M = ReadDoubleLittleEndian(dataStream, streamPosition + 24);
Shapes.Add(p);
}
private void ReadPolygonZ(Byte[] dataStream, int streamPosition)
{
var pg = new PolygonZ();
pg.BoundingBox = new Double[4];
pg.BoundingBox[0] = ReadDoubleLittleEndian(dataStream, streamPosition);
pg.BoundingBox[1] = ReadDoubleLittleEndian(dataStream, streamPosition + 8);
pg.BoundingBox[2] = ReadDoubleLittleEndian(dataStream, streamPosition + 16);
pg.BoundingBox[3] = ReadDoubleLittleEndian(dataStream, streamPosition + 24);
var numberOfParts = ReadIntLittleEndian(dataStream, streamPosition + 32);
var numberOfPoints = ReadIntLittleEndian(dataStream, streamPosition + 36);
pg.Rings = new RingZ[numberOfParts];
var parts = new int[numberOfParts];
var pos = streamPosition + 40;
// Convert starting indices to ending indices for the geometry. Skip first record.
for (var i = 1; i < numberOfParts; i++)
{
parts[i - 1] = ReadIntLittleEndian(dataStream, pos + (i * 4)) - 1;
}
// Add the final record as the end of last "part".
parts[numberOfParts - 1] = numberOfPoints - 1;
pos = pos + 4 * numberOfParts;
var z = 0;
int lineEndsAt;
var rng = new RingZ();
var pts = new List<PointZ>();
for (var i = 0; i < numberOfPoints; i++)
{
lineEndsAt = parts[z];
if (i == lineEndsAt)
{
// End of polygon. Add the last point and wrap up.
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
pts.Add(p);
rng.Points = pts.ToArray();
pts.Clear();
pg.Rings[z] = rng;
rng = new RingZ();
if (z < numberOfParts - 1) z++;
}
else
{
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
pts.Add(p);
}
}
pos = pos + numberOfPoints * 16;
pg.ZMin = ReadDoubleLittleEndian(dataStream, pos);
pg.ZMax = ReadDoubleLittleEndian(dataStream, pos + 8);
var pointIndex = 0;
for (var i = 0; i < pg.Rings.Length; i++)
{
for (var k = 0; k < pg.Rings[i].Points.Length; k++)
{
pg.Rings[i].Points[k].Z = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
pos = pos + 16 + numberOfPoints * 8;
pg.MMin = ReadDoubleLittleEndian(dataStream, pos);
pg.MMax = ReadDoubleLittleEndian(dataStream, pos + 8);
pointIndex = 0;
for (var i = 0; i < pg.Rings.Length; i++)
{
for (var k = 0; k < pg.Rings[i].Points.Length; k++)
{
pg.Rings[i].Points[k].M = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
Shapes.Add(pg);
}
private void ReadMultiPatch(Byte[] dataStream, int streamPosition)
{
var mp = new MultiPatch();
mp.BoundingBox = new Double[4];
mp.BoundingBox[0] = ReadDoubleLittleEndian(dataStream, streamPosition);
mp.BoundingBox[1] = ReadDoubleLittleEndian(dataStream, streamPosition + 8);
mp.BoundingBox[2] = ReadDoubleLittleEndian(dataStream, streamPosition + 16);
mp.BoundingBox[3] = ReadDoubleLittleEndian(dataStream, streamPosition + 24);
var numberOfParts = ReadIntLittleEndian(dataStream, streamPosition + 32);
var numberOfPoints = ReadIntLittleEndian(dataStream, streamPosition + 36);
mp.Parts = new MultiPatchElement[numberOfParts];
var parts = new int[numberOfParts];
var partTypes = new int[numberOfParts];
var pos = streamPosition + 40;
// Convert starting indices to ending indices for the geometry. Skip first record.
for (var i = 1; i < numberOfParts; i++)
{
parts[i - 1] = ReadIntLittleEndian(dataStream, pos + (i * 4)) - 1;
}
// Add the final record as the end of last "part".
parts[numberOfParts - 1] = numberOfPoints - 1;
pos = pos + 4 * numberOfParts;
// Convert starting indices to ending indices for the geometry. Skip first record.
for (var i = 0; i < numberOfParts; i++)
{
partTypes[i] = ReadIntLittleEndian(dataStream, pos + (i * 4));
}
pos = pos + 4 * numberOfParts;
var z = 0;
int lineEndsAt;
MultiPatchElement sh;
var pts = new List<PointZ>();
for (var i = 0; i < numberOfPoints; i++)
{
lineEndsAt = parts[z];
if (i == lineEndsAt)
{
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
sh = CreateMultiPatchGeometry(partTypes[z]);
pts.Add(p);
sh.Points = pts.ToArray();
pts.Clear();
if (z < numberOfParts - 1) z++;
sh = CreateMultiPatchGeometry(partTypes[z]);
}
else
{
var p = new PointZ();
p.X = ReadDoubleLittleEndian(dataStream, pos + (i * 16));
p.Y = ReadDoubleLittleEndian(dataStream, pos + (i * 16) + 8);
pts.Add(p);
}
}
pos = pos + numberOfPoints * 16;
mp.ZMin = ReadDoubleLittleEndian(dataStream, pos);
mp.ZMax = ReadDoubleLittleEndian(dataStream, pos + 8);
var pointIndex = 0;
for (var i = 0; i < mp.Parts.Length; i++)
{
for (var k = 0; k < mp.Parts[i].Points.Length; k++)
{
mp.Parts[i].Points[k].Z = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
pos = pos + 16 + numberOfPoints * 8;
mp.MMin = ReadDoubleLittleEndian(dataStream, pos);
mp.MMax = ReadDoubleLittleEndian(dataStream, pos + 8);
pointIndex = 0;
for (var i = 0; i < mp.Parts.Length; i++)
{
for (var k = 0; k < mp.Parts[i].Points.Length; k++)
{
mp.Parts[i].Points[k].M = ReadDoubleLittleEndian(dataStream, pos + 16 + (pointIndex * 8));
pointIndex++;
}
}
Shapes.Add(mp);
}
