protected void Reload() { if (_port_map_listener != null) { foreach (var l in _port_map_listener) { l.Stop(); } _port_map_listener = null; } // some logic in configuration updated the config when saving, we need to read it again _config = MergeGetConfiguration(_config); _config.FlushPortMapCache(); Logging.save_to_file = _config.logEnable; Logging.OpenLogFile(); ReloadIPRange(); var hostMap = new HostMap(); hostMap.LoadHostFile(); HostMap.Instance().Clear(hostMap); if (privoxyRunner == null) { privoxyRunner = new HttpProxyRunner(); } if (_pacServer == null) { _pacServer = new PACServer(); _pacServer.PACFileChanged += pacServer_PACFileChanged; _pacServer.UserRuleFileChanged += pacServer_UserRuleFileChanged; } _pacServer.UpdateConfiguration(_config); if (gfwListUpdater == null) { gfwListUpdater = new GFWListUpdater(); gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; gfwListUpdater.Error += pacServer_PACUpdateError; } if (chnDomainsAndIPUpdater == null) { chnDomainsAndIPUpdater = new ChnDomainsAndIPUpdater(); chnDomainsAndIPUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; chnDomainsAndIPUpdater.Error += pacServer_PACUpdateError; } _listener?.Stop(); // don't put PrivoxyRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open try { privoxyRunner.Stop(); privoxyRunner.Start(_config); var local = new Local(_config, _transfer, _rangeSet); var services = new List <Listener.Service> { local, _pacServer, new APIServer(this, _config), new HttpPortForwarder(privoxyRunner.RunningPort, _config) }; _listener = new Listener(services); _listener.Start(_config, 0); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException se) { if (se.SocketErrorCode == SocketError.AddressAlreadyInUse) { e = new Exception(string.Format(I18N.GetString("Port {0} already in use"), _config.localPort), se); } else if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(string.Format(I18N.GetString("Port {0} is reserved by system"), _config.localPort), se); } } Logging.LogUsefulException(e); ReportError(e); } _port_map_listener = new List <Listener>(); foreach (var pair in _config.GetPortMapCache()) { try { var local = new Local(_config, _transfer, _rangeSet); var services = new List <Listener.Service> { local }; var listener = new Listener(services); listener.Start(_config, pair.Key); _port_map_listener.Add(listener); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException se) { if (se.SocketErrorCode == SocketError.AddressAlreadyInUse) { e = new Exception(string.Format(I18N.GetString("Port {0} already in use"), pair.Key), e); } else if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(string.Format(I18N.GetString("Port {0} is reserved by system"), pair.Key), se); } } Logging.LogUsefulException(e); ReportError(e); } } ConfigChanged?.Invoke(this, new EventArgs()); UpdateSystemProxy(); Utils.ReleaseMemory(); }
protected void Reload() { // some logic in configuration updated the config when saving, we need to read it again _config = MergeGetConfiguration(_config); if (polipoRunner == null) { polipoRunner = new PolipoRunner(); } if (_pacServer == null) { _pacServer = new PACServer(); _pacServer.PACFileChanged += pacServer_PACFileChanged; } _pacServer.UpdateConfiguration(_config); if (gfwListUpdater == null) { gfwListUpdater = new GFWListUpdater(); gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; gfwListUpdater.Error += pacServer_PACUpdateError; } // don't put polipoRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open try { if (_listener != null && !_listener.isConfigChange(_config)) { Local local = new Local(_config); _listener.GetServices()[0] = local; if (polipoRunner.HasExited()) { polipoRunner.Stop(); polipoRunner.Start(_config); } } else { if (_listener != null) { _listener.Stop(); _listener = null; } polipoRunner.Stop(); polipoRunner.Start(_config); Local local = new Local(_config); List <Listener.Service> services = new List <Listener.Service>(); services.Add(local); services.Add(_pacServer); services.Add(new PortForwarder(polipoRunner.RunningPort)); _listener = new Listener(services); _listener.Start(_config); } } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use"), e); } } Logging.LogUsefulException(e); ReportError(e); } if (ConfigChanged != null) { ConfigChanged(this, new EventArgs()); } UpdateSystemProxy(); Util.Utils.ReleaseMemory(); }
protected void Reload() { if (_port_map_listener != null) { foreach (Listener l in _port_map_listener) { l.Stop(); } _port_map_listener = null; } // some logic in configuration updated the config when saving, we need to read it again _config = MergeGetConfiguration(_config); _config.FlushPortMapCache(); ReloadIPRange(); HostMap hostMap = new HostMap(); hostMap.LoadHostFile(); HostMap.Instance().Clear(hostMap); #if !_CONSOLE if (polipoRunner == null) { polipoRunner = new HttpProxyRunner(); } #endif if (_pacServer == null) { _pacServer = new PACServer(); _pacServer.PACFileChanged += pacServer_PACFileChanged; } _pacServer.UpdateConfiguration(_config); if (gfwListUpdater == null) { gfwListUpdater = new GFWListUpdater(); gfwListUpdater.UpdateCompleted += pacServer_PACUpdateCompleted; gfwListUpdater.Error += pacServer_PACUpdateError; } // don't put polipoRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open bool _firstRun = firstRun; for (int i = 1; i <= 5; ++i) { _firstRun = false; try { if (_listener != null && !_listener.isConfigChange(_config)) { Local local = new Local(_config, _transfer, _rangeSet); _listener.GetServices()[0] = local; #if !_CONSOLE if (polipoRunner.HasExited()) { polipoRunner.Stop(); polipoRunner.Start(_config); _listener.GetServices()[3] = new HttpPortForwarder(polipoRunner.RunningPort, _config); } #endif } else { if (_listener != null) { _listener.Stop(); _listener = null; } #if !_CONSOLE polipoRunner.Stop(); polipoRunner.Start(_config); #endif Local local = new Local(_config, _transfer, _rangeSet); List <Listener.Service> services = new List <Listener.Service>(); services.Add(local); services.Add(_pacServer); services.Add(new APIServer(this, _config)); #if !_CONSOLE services.Add(new HttpPortForwarder(polipoRunner.RunningPort, _config)); #endif _listener = new Listener(services); _listener.Start(_config, 0); } break; } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use") + string.Format(" {0}", _config.localPort), e); } } Logging.LogUsefulException(e); if (!_firstRun) { ReportError(e); break; } else { Thread.Sleep(1000 * i * i); } if (_listener != null) { _listener.Stop(); _listener = null; } } } _port_map_listener = new List <Listener>(); foreach (KeyValuePair <int, PortMapConfigCache> pair in _config.GetPortMapCache()) { try { Local local = new Local(_config, _transfer, _rangeSet); List <Listener.Service> services = new List <Listener.Service>(); services.Add(local); Listener listener = new Listener(services); listener.Start(_config, pair.Key); _port_map_listener.Add(listener); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException) { SocketException se = (SocketException)e; if (se.SocketErrorCode == SocketError.AccessDenied) { e = new Exception(I18N.GetString("Port already in use") + string.Format(" {0}", pair.Key), e); } } Logging.LogUsefulException(e); ReportError(e); } } ConfigChanged?.Invoke(this, new EventArgs()); UpdateSystemProxy(); Util.Utils.ReleaseMemory(); }
public void Reload() { if (_port_map_listener != null) { foreach (var l in _port_map_listener) { l.Stop(); } _port_map_listener = null; } // some logic in configuration updated the config when saving, we need to read it again _config = MergeGetConfiguration(_config); _config.FlushPortMapCache(); Logging.save_to_file = _config.logEnable; Logging.OpenLogFile(); if (_hostDaemon == null) { _hostDaemon = new HostDaemon(); _hostDaemon.ChnIpChanged += (o, args) => ReloadIPRange(); _hostDaemon.UserRuleChanged += (o, args) => HostMap.Reload(); } ReloadIPRange(); HostMap.Reload(); GlobalConfiguration.OSSupportsLocalIPv6 = Socket.OSSupportsIPv6; if (privoxyRunner == null) { privoxyRunner = new HttpProxyRunner(); } if (_pacDaemon == null) { _pacDaemon = new PACDaemon(); _pacDaemon.PACFileChanged += (o, args) => UpdateSystemProxy(); _pacDaemon.UserRuleFileChanged += PacDaemon_UserRuleFileChanged; } if (_pacServer == null) { _pacServer = new PACServer(_pacDaemon); } _pacServer.UpdatePacUrl(_config); if (gfwListUpdater == null) { gfwListUpdater = new GFWListUpdater(); gfwListUpdater.UpdateCompleted += (o, args) => UpdatePACFromGFWListCompleted?.Invoke(o, args); gfwListUpdater.Error += (o, args) => UpdatePACFromGFWListError?.Invoke(o, args); } if (chnDomainsAndIPUpdater == null) { chnDomainsAndIPUpdater = new ChnDomainsAndIPUpdater(); chnDomainsAndIPUpdater.UpdateCompleted += (o, args) => UpdatePACFromChnDomainsAndIPCompleted?.Invoke(o, args); chnDomainsAndIPUpdater.Error += (o, args) => UpdatePACFromGFWListError?.Invoke(o, args); } _listener?.Stop(); privoxyRunner.Stop(); // don't put privoxyRunner.Start() before pacServer.Stop() // or bind will fail when switching bind address from 0.0.0.0 to 127.0.0.1 // though UseShellExecute is set to true now // http://stackoverflow.com/questions/10235093/socket-doesnt-close-after-application-exits-if-a-launched-process-is-open try { privoxyRunner.Start(_config); var local = new Local(_config, _transfer, _chnRangeSet); var services = new List <Listener.IService> { local, _pacServer, new HttpPortForwarder(privoxyRunner.RunningPort, _config) }; _listener = new Listener(services); _listener.Start(_config, 0); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException se) { switch (se.SocketErrorCode) { case SocketError.AddressAlreadyInUse: { e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortInUse"), _config.localPort), se); break; } case SocketError.AccessDenied: { e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortReserved"), _config.localPort), se); break; } } } Logging.LogUsefulException(e); ReportError(e); } _port_map_listener = new List <Listener>(); foreach (var pair in _config.GetPortMapCache()) { try { var local = new Local(_config, _transfer, _chnRangeSet); var services = new List <Listener.IService> { local }; var listener = new Listener(services); listener.Start(_config, pair.Key); _port_map_listener.Add(listener); } catch (Exception e) { // translate Microsoft language into human language // i.e. An attempt was made to access a socket in a way forbidden by its access permissions => Port already in use if (e is SocketException se) { switch (se.SocketErrorCode) { case SocketError.AddressAlreadyInUse: e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortInUse"), pair.Key), e); break; case SocketError.AccessDenied: e = new Exception(string.Format(I18NUtil.GetAppStringValue(@"PortReserved"), pair.Key), se); break; } } Logging.LogUsefulException(e); ReportError(e); } } Application.Current.Dispatcher?.Invoke(() => { ConfigChanged?.Invoke(this, new EventArgs()); }); UpdateSystemProxy(); Utils.ReleaseMemory(); }