private void parsePkpmYjk()
{
for (int i = 0; i < m_contentArray.Length; i++)
{
if (m_contentArray[i].Contains("工况"))
{
InfoDisp dispInfo = new InfoDisp();
dispList.Add(dispInfo);
string lineData = m_contentArray[i];
string[] dataArray = lineData.Trim().Split(new string[] { "工况", " " }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.WorkNo = int.Parse(dataArray[1]);
dispInfo.Description = lineData;
if (m_contentArray[i].Contains("规定水平力"))
{
i = i + 1;
while (i < m_contentArray.Length && !m_contentArray[i].Contains("工况"))
{
if (m_contentArray[i].Contains("X方向最大位移") && m_contentArray[i].Contains("比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XFactor = double.Parse(subArray[1]);
dispInfo.XFactor_description = subArray[subArray.Length - 1];
dispInfo.XFactor_FullDescription = line;
}
else if (m_contentArray[i].Contains("Y方向最大位移") && m_contentArray[i].Contains("比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YFactor = double.Parse(subArray[1]);
dispInfo.YFactor_description = subArray[subArray.Length - 1];
dispInfo.YFactor_FullDescription = line;
}
if (m_contentArray[i].Contains("X方向最大层间位移") && m_contentArray[i].Contains("比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XFactor_floor = double.Parse(subArray[1]);
dispInfo.XFactor_floor_description = subArray[subArray.Length - 1];
dispInfo.XFactor_floor_FullDescription = line;
}
else if (m_contentArray[i].Contains("Y方向最大层间位移") && m_contentArray[i].Contains("比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YFactor_floor = double.Parse(subArray[1]);
dispInfo.YFactor_floor_description = subArray[subArray.Length - 1];
dispInfo.YFactor_floor_FullDescription = line;
}
i = i + 1;
}
i = i - 1;
}
else
{
i = i + 1;
while (i < m_contentArray.Length && !m_contentArray[i].Contains("工况"))
{
if (m_contentArray[i].Contains("X") && m_contentArray[i].Contains("最大层间位移角"))
{
string line = m_contentArray[i];
string[] datas = line.Split(new char[] { '/', ':', '：', '.', '(', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XMaxDisp_floorAngle = int.Parse(datas[2]);
dispInfo.XMaxDisp_floorAngle_description = datas[datas.Length - 1];
dispInfo.XMaxDisp_floorAngle_FullDescription = line;
}
else if (m_contentArray[i].Contains("Y") && m_contentArray[i].Contains("最大层间位移角"))
{
string line = m_contentArray[i];
string[] datas = line.Split(new char[] { '/', ':', '：', '.', '(', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YMaxDisp_floorAngle = int.Parse(datas[2]);
dispInfo.YMaxDisp_floorAngle_description = datas[datas.Length - 1];
dispInfo.YMaxDisp_floorAngle_FullDescription = line;
}
i = i + 1;
}
i = i - 1;
}
}
}
if (dispList.Count > 0)
{
maxX = maxY = maxX_floor = maxY_floor = dispList[0];
maxX_FloorDispAngle = maxY_FloorDispAngle = dispList[0];
for (int i = 1; i < dispList.Count; i++)
{
if (maxX.XFactor < dispList[i].XFactor)
{
maxX = dispList[i];
}
if (maxY.YFactor < dispList[i].YFactor)
{
maxY = dispList[i];
}
if (maxX_floor.XFactor_floor < dispList[i].XFactor_floor)
{
maxX_floor = dispList[i];
}
if (maxY_floor.YFactor_floor < dispList[i].YFactor_floor)
{
maxY_floor = dispList[i];
}
if ((maxX_FloorDispAngle.XMaxDisp_floorAngle < 0.1 ||
(maxX_FloorDispAngle.XMaxDisp_floorAngle > dispList[i].XMaxDisp_floorAngle &&
dispList[i].XMaxDisp_floorAngle > 0.1)) && !dispList[i].Description.Contains("偶然偏心") &&
!dispList[i].Description.Contains("双向"))
{
maxX_FloorDispAngle = dispList[i];
}
if ((maxY_FloorDispAngle.YMaxDisp_floorAngle < 0.1 ||
(maxY_FloorDispAngle.YMaxDisp_floorAngle > dispList[i].YMaxDisp_floorAngle &&
dispList[i].YMaxDisp_floorAngle > 0.1)) && !dispList[i].Description.Contains("偶然偏心") &&
!dispList[i].Description.Contains("双向"))
{
maxY_FloorDispAngle = dispList[i];
}
}
}
}
private void parseMidas()
{
int workNo = 1;
for (int i = 0; i < m_contentArray.Length; i++)
{
if (m_contentArray[i].Contains("层号") && m_contentArray[i].Contains("Ratio"))
{
InfoDisp dispInfo = new InfoDisp();
dispList.Add(dispInfo);
string lineData = m_contentArray[i - 5];
dispInfo.WorkNo = workNo++;
dispInfo.Description = lineData;
i++;
if (!lineData.Contains("90"))
{
while (i < m_contentArray.Length && !m_contentArray[i].Contains("层号"))
{
if (m_contentArray[i].Contains("最大层间位移角"))
{
string line = m_contentArray[i];
string[] datas = line.Split(new char[] { '/', ':', '：', '(', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XMaxDisp_floorAngle = int.Parse(datas[4]);
dispInfo.XMaxDisp_floorAngle_description = datas[1];
dispInfo.XMaxDisp_floorAngle_FullDescription = line;
}
if (m_contentArray[i].Contains("最大位移与层平均位移的比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XFactor = double.Parse(subArray[3]);
dispInfo.XFactor_description = subArray[1];
dispInfo.XFactor_FullDescription = line;
}
if (m_contentArray[i].Contains("最大层间位移与平均层间位移的比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.XFactor_floor = double.Parse(subArray[3]);
dispInfo.XFactor_floor_description = subArray[1];
dispInfo.XFactor_floor_FullDescription = line;
}
i = i + 1;
}
}
else
{
while (i < m_contentArray.Length && !m_contentArray[i].Contains("层号"))
{
if (m_contentArray[i].Contains("最大层间位移角"))
{
string line = m_contentArray[i];
string[] datas = line.Split(new char[] { '/', ':', '：', '.', '(', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YMaxDisp_floorAngle = int.Parse(datas[4]);
dispInfo.YMaxDisp_floorAngle_description = datas[1];
dispInfo.YMaxDisp_floorAngle_FullDescription = line;
}
if (m_contentArray[i].Contains("最大位移与层平均位移的比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YFactor = double.Parse(subArray[3]);
dispInfo.YFactor_description = subArray[1];
dispInfo.YFactor_FullDescription = line;
}
if (m_contentArray[i].Contains("最大层间位移与平均层间位移的比值"))
{
string line = m_contentArray[i];
string[] subArray = line.Split(new char[] { '(', ':', '：', ')' }, StringSplitOptions.RemoveEmptyEntries);
dispInfo.YFactor_floor = double.Parse(subArray[3]);
dispInfo.YFactor_floor_description = subArray[1];
dispInfo.YFactor_floor_FullDescription = line;
}
i = i + 1;
}
}
i = i - 1;
}
}
if (dispList.Count > 0)
{
maxX = maxY = maxX_floor = maxY_floor = dispList[0];
maxX_FloorDispAngle = maxY_FloorDispAngle = dispList[0];
for (int i = 1; i < dispList.Count; i++)
{
if (maxX.XFactor < dispList[i].XFactor)
{
maxX = dispList[i];
}
if (maxY.YFactor < dispList[i].YFactor)
{
maxY = dispList[i];
}
if (maxX_floor.XFactor_floor < dispList[i].XFactor_floor)
{
maxX_floor = dispList[i];
}
if (maxY_floor.YFactor_floor < dispList[i].YFactor_floor)
{
maxY_floor = dispList[i];
}
if ((maxX_FloorDispAngle.XMaxDisp_floorAngle < 0.1 ||
(maxX_FloorDispAngle.XMaxDisp_floorAngle > dispList[i].XMaxDisp_floorAngle &&
dispList[i].XMaxDisp_floorAngle > 0.1)) && !dispList[i].Description.Contains("偶然偏心"))
{
maxX_FloorDispAngle = dispList[i];
}
if ((maxY_FloorDispAngle.YMaxDisp_floorAngle < 0.1 ||
(maxY_FloorDispAngle.YMaxDisp_floorAngle > dispList[i].YMaxDisp_floorAngle &&
dispList[i].YMaxDisp_floorAngle > 0.1)) && !dispList[i].Description.Contains("偶然偏心"))
{
maxY_FloorDispAngle = dispList[i];
}
}
}
}
