public void Prestep(float inverseDt)
{
//Given that we're collecting position, inverse mass, and inertia all at once, it makes no sense to store position separately from inversemass and inertia.
//Since you should not expect the 4 involved bodies to be in memory *together*, the best you can do is to ensure that the set of values are together.
//Otherwise you're multiplying cache misses for no reason!
var inverseMassA = new Vector4(BodyA0.InverseMass, BodyA1.InverseMass, BodyA2.InverseMass, BodyA3.InverseMass);
var inverseMassB = new Vector4(BodyB0.InverseMass, BodyB1.InverseMass, BodyB2.InverseMass, BodyB3.InverseMass);
var inverseInertiaTensorA = new Matrix3x3Width4(ref BodyA0.InertiaTensorInverse, ref BodyA1.InertiaTensorInverse, ref BodyA2.InertiaTensorInverse, ref BodyA3.InertiaTensorInverse);
var inverseInertiaTensorB = new Matrix3x3Width4(ref BodyB0.InertiaTensorInverse, ref BodyB1.InertiaTensorInverse, ref BodyB2.InertiaTensorInverse, ref BodyB3.InertiaTensorInverse);
Vector3Width4 positionA = new Vector3Width4(ref BodyA0.Position, ref BodyA1.Position, ref BodyA2.Position, ref BodyA3.Position);
Vector3Width4 positionB = new Vector3Width4(ref BodyA0.Position, ref BodyB1.Position, ref BodyB2.Position, ref BodyB3.Position);
for (int i = 0; i < ConstraintCount; ++i)
{
Constraints[i].Prestep(inverseDt, ref inverseMassA, ref inverseMassB, ref inverseInertiaTensorA, ref inverseInertiaTensorB, ref positionA, ref positionB);
}
//for (int i = 0; i < 4; ++i)
//{
// a.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//}
//a.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//b.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//c.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//d.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
}
public void Prestep(float inverseDt)
{
//Given that we're collecting position, inverse mass, and inertia all at once, it makes no sense to store position separately from inversemass and inertia.
//Since you should not expect the 4 involved bodies to be in memory *together*, the best you can do is to ensure that the set of values are together.
//Otherwise you're multiplying cache misses for no reason!
var inverseMassA = new Vector4(BodyA0.InverseMass, BodyA1.InverseMass, BodyA2.InverseMass, BodyA3.InverseMass);
var inverseMassB = new Vector4(BodyB0.InverseMass, BodyB1.InverseMass, BodyB2.InverseMass, BodyB3.InverseMass);
var inverseInertiaTensorA = new Matrix3x3Width4(ref BodyA0.InertiaTensorInverse, ref BodyA1.InertiaTensorInverse, ref BodyA2.InertiaTensorInverse, ref BodyA3.InertiaTensorInverse);
var inverseInertiaTensorB = new Matrix3x3Width4(ref BodyB0.InertiaTensorInverse, ref BodyB1.InertiaTensorInverse, ref BodyB2.InertiaTensorInverse, ref BodyB3.InertiaTensorInverse);
Vector3Width4 positionA = new Vector3Width4(ref BodyA0.Position, ref BodyA1.Position, ref BodyA2.Position, ref BodyA3.Position);
Vector3Width4 positionB = new Vector3Width4(ref BodyA0.Position, ref BodyB1.Position, ref BodyB2.Position, ref BodyB3.Position);
for (int i = 0; i < ConstraintCount; ++i)
{
Constraints[i].Prestep(inverseDt, ref inverseMassA, ref inverseMassB, ref inverseInertiaTensorA, ref inverseInertiaTensorB, ref positionA, ref positionB);
}
//for (int i = 0; i < 4; ++i)
//{
// a.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//}
//a.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//b.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//c.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
//d.Prestep(inverseDt, ref InverseMassA, ref InverseMassB, ref InverseInertiaTensorA, ref InverseInertiaTensorB, ref positionA, ref positionB);
}
public void Prestep(float inverseDt)
{
//C = dot(Pa - Pb, N) > 0
//Jacobians:
//LinearA: N
//AngularA: cross(OffsetPa, N)
//LinearB: -N
//AngularB: -cross(OffsetPb, N)
//var positionA = new Vector3Width4();
//var positionB = new Vector3Width4();
//Given that we're collecting position, inverse mass, and inertia all at once, it makes no sense to store position separately from inversemass and inertia.
//Since you should not expect the 4 involved bodies to be in memory *together*, the best you can do is to ensure that the set of values are together.
//Otherwise you're multiplying cache misses for no reason!
var InverseMassA = new Vector4(BodyA0.InverseMass, BodyA1.InverseMass, BodyA2.InverseMass, BodyA3.InverseMass);
var InverseMassB = new Vector4(BodyB0.InverseMass, BodyB1.InverseMass, BodyB2.InverseMass, BodyB3.InverseMass);
var InverseInertiaTensorA = new Matrix3x3Width4(ref BodyA0.InertiaTensorInverse, ref BodyA1.InertiaTensorInverse, ref BodyA2.InertiaTensorInverse, ref BodyA3.InertiaTensorInverse);
var InverseInertiaTensorB = new Matrix3x3Width4(ref BodyB0.InertiaTensorInverse, ref BodyB1.InertiaTensorInverse, ref BodyB2.InertiaTensorInverse, ref BodyB3.InertiaTensorInverse);
Vector3Width4 positionA = new Vector3Width4(ref BodyA0.Position, ref BodyA1.Position, ref BodyA2.Position, ref BodyA3.Position);
Vector3Width4 positionB = new Vector3Width4(ref BodyA0.Position, ref BodyB1.Position, ref BodyB2.Position, ref BodyB3.Position);
LinearJacobianA = ContactNormal;
Vector3Width4.Negate(ref ContactNormal, out LinearJacobianB);
Vector3Width4 offsetA, offsetB;
Vector3Width4.Subtract(ref ContactPosition, ref positionA, out offsetA);
Vector3Width4.Subtract(ref ContactPosition, ref positionB, out offsetB);
Vector3Width4.Cross(ref offsetA, ref ContactNormal, out AngularJacobianA);
Vector3Width4.Cross(ref ContactNormal, ref offsetB, out AngularJacobianB);// note negation->parameter reverse
//Allow velocity that closes a gap, and apply penetration correction against positive depth.
//Bounciness not yet included.
PenetrationBias = ContactPenetration * inverseDt;
PenetrationBias = -Vector4.Min(Vector4.Min(PenetrationBias, PenetrationBias * 0.2f), new Vector4(0.2f));
//The inertia tensor is in world space, so no jacobian transformation is required.
Vector3Width4.Multiply(ref LinearJacobianA, ref InverseMassA, out LinearJacobianITA);
Vector3Width4.Multiply(ref LinearJacobianB, ref InverseMassB, out LinearJacobianITB);
Matrix3x3Width4.Transform(ref AngularJacobianA, ref InverseInertiaTensorA, out AngularJacobianITA);
Matrix3x3Width4.Transform(ref AngularJacobianB, ref InverseInertiaTensorB, out AngularJacobianITB);
Vector4 angularContributionA, angularContributionB;
Vector3Width4.Dot(ref AngularJacobianITA, ref AngularJacobianITA, out angularContributionA);
Vector3Width4.Dot(ref AngularJacobianITB, ref AngularJacobianITB, out angularContributionB);
var inverseEffectiveMass = InverseMassA + InverseMassB + angularContributionA + angularContributionB;
Vector4 CollisionSoftness = new Vector4(5);
Softness = CollisionSoftness * inverseEffectiveMass * inverseDt;
EffectiveMass = Vector4.One / (Softness + inverseEffectiveMass);
}
public void Prestep(float inverseDt,
ref Vector4 inverseMassA, ref Vector4 inverseMassB,
ref Matrix3x3Width4 inverseInertiaTensorA, ref Matrix3x3Width4 inverseInertiaTensorB,
ref Vector3Width4 positionA, ref Vector3Width4 positionB)
{
//C = dot(Pa - Pb, N) > 0
//Jacobians:
//LinearA: N
//AngularA: cross(OffsetPa, N)
//LinearB: -N
//AngularB: -cross(OffsetPb, N)
//var positionA = new Vector3Width4();
//var positionB = new Vector3Width4();
LinearJacobianA = ContactNormal;
Vector3Width4.Negate(ref ContactNormal, out LinearJacobianB);
Vector3Width4 offsetA, offsetB;
Vector3Width4.Subtract(ref ContactPosition, ref positionA, out offsetA);
Vector3Width4.Subtract(ref ContactPosition, ref positionB, out offsetB);
Vector3Width4.Cross(ref offsetA, ref ContactNormal, out AngularJacobianA);
Vector3Width4.Cross(ref ContactNormal, ref offsetB, out AngularJacobianB);// note negation->parameter reverse
//Allow velocity that closes a gap, and apply penetration correction against positive depth.
//Bounciness not yet included.
PenetrationBias = ContactPenetration * inverseDt;
PenetrationBias = -Vector4.Min(Vector4.Min(PenetrationBias, PenetrationBias * 0.2f), new Vector4(0.2f));
//The inertia tensor is in world space, so no jacobian transformation is required.
Vector3Width4.Multiply(ref LinearJacobianA, ref inverseMassA, out LinearJacobianITA);
Vector3Width4.Multiply(ref LinearJacobianB, ref inverseMassB, out LinearJacobianITB);
Matrix3x3Width4.Transform(ref AngularJacobianA, ref inverseInertiaTensorA, out AngularJacobianITA);
Matrix3x3Width4.Transform(ref AngularJacobianB, ref inverseInertiaTensorB, out AngularJacobianITB);
Vector4 angularContributionA, angularContributionB;
Vector3Width4.Dot(ref AngularJacobianITA, ref AngularJacobianITA, out angularContributionA);
Vector3Width4.Dot(ref AngularJacobianITB, ref AngularJacobianITB, out angularContributionB);
var inverseEffectiveMass = inverseMassA + inverseMassB + angularContributionA + angularContributionB;
Vector4 CollisionSoftness = new Vector4(5);
Softness = CollisionSoftness * inverseEffectiveMass * inverseDt;
EffectiveMass = Vector4.One / (Softness + inverseEffectiveMass);
}
public static void Transform(ref Vector3Width4 v, ref Matrix3x3Width4 m, out Vector3Width4 result)
{
result.X = v.X * m.M11 + v.Y * m.M21 + v.Z * m.M31;
result.Y = v.X * m.M12 + v.Y * m.M22 + v.Z * m.M32;
result.Z = v.X * m.M13 + v.Y * m.M23 + v.Z * m.M33;
}
public static void Transform(ref Vector3Width4 v, ref Matrix3x3Width4 m, out Vector3Width4 result)
{
result.X = v.X * m.M11 + v.Y * m.M21 + v.Z * m.M31;
result.Y = v.X * m.M12 + v.Y * m.M22 + v.Z * m.M32;
result.Z = v.X * m.M13 + v.Y * m.M23 + v.Z * m.M33;
}
public void Prestep(float inverseDt,
ref Vector4 inverseMassA, ref Vector4 inverseMassB,
ref Matrix3x3Width4 inverseInertiaTensorA, ref Matrix3x3Width4 inverseInertiaTensorB,
ref Vector3Width4 positionA, ref Vector3Width4 positionB)
{
//C = dot(Pa - Pb, N) > 0
//Jacobians:
//LinearA: N
//AngularA: cross(OffsetPa, N)
//LinearB: -N
//AngularB: -cross(OffsetPb, N)
//var positionA = new Vector3Width4();
//var positionB = new Vector3Width4();
LinearJacobianA = ContactNormal;
Vector3Width4.Negate(ref ContactNormal, out LinearJacobianB);
Vector3Width4 offsetA, offsetB;
Vector3Width4.Subtract(ref ContactPosition, ref positionA, out offsetA);
Vector3Width4.Subtract(ref ContactPosition, ref positionB, out offsetB);
Vector3Width4.Cross(ref offsetA, ref ContactNormal, out AngularJacobianA);
Vector3Width4.Cross(ref ContactNormal, ref offsetB, out AngularJacobianB);// note negation->parameter reverse
//Allow velocity that closes a gap, and apply penetration correction against positive depth.
//Bounciness not yet included.
PenetrationBias = ContactPenetration * inverseDt;
PenetrationBias = -Vector4.Min(Vector4.Min(PenetrationBias, PenetrationBias * 0.2f), new Vector4(0.2f));
//The inertia tensor is in world space, so no jacobian transformation is required.
Vector3Width4.Multiply(ref LinearJacobianA, ref inverseMassA, out LinearJacobianITA);
Vector3Width4.Multiply(ref LinearJacobianB, ref inverseMassB, out LinearJacobianITB);
Matrix3x3Width4.Transform(ref AngularJacobianA, ref inverseInertiaTensorA, out AngularJacobianITA);
Matrix3x3Width4.Transform(ref AngularJacobianB, ref inverseInertiaTensorB, out AngularJacobianITB);
Vector4 angularContributionA, angularContributionB;
Vector3Width4.Dot(ref AngularJacobianITA, ref AngularJacobianITA, out angularContributionA);
Vector3Width4.Dot(ref AngularJacobianITB, ref AngularJacobianITB, out angularContributionB);
var inverseEffectiveMass = inverseMassA + inverseMassB + angularContributionA + angularContributionB;
Vector4 CollisionSoftness = new Vector4(5);
Softness = CollisionSoftness * inverseEffectiveMass * inverseDt;
EffectiveMass = Vector4.One / (Softness + inverseEffectiveMass);
}
public void Prestep(float inverseDt)
{
//C = dot(Pa - Pb, N) > 0
//Jacobians:
//LinearA: N
//AngularA: cross(OffsetPa, N)
//LinearB: -N
//AngularB: -cross(OffsetPb, N)
//var positionA = new Vector3Width4();
//var positionB = new Vector3Width4();
//Given that we're collecting position, inverse mass, and inertia all at once, it makes no sense to store position separately from inversemass and inertia.
//Since you should not expect the 4 involved bodies to be in memory *together*, the best you can do is to ensure that the set of values are together.
//Otherwise you're multiplying cache misses for no reason!
var InverseMassA = new Vector4(BodyA0.InverseMass, BodyA1.InverseMass, BodyA2.InverseMass, BodyA3.InverseMass);
var InverseMassB = new Vector4(BodyB0.InverseMass, BodyB1.InverseMass, BodyB2.InverseMass, BodyB3.InverseMass);
var InverseInertiaTensorA = new Matrix3x3Width4(ref BodyA0.InertiaTensorInverse, ref BodyA1.InertiaTensorInverse, ref BodyA2.InertiaTensorInverse, ref BodyA3.InertiaTensorInverse);
var InverseInertiaTensorB = new Matrix3x3Width4(ref BodyB0.InertiaTensorInverse, ref BodyB1.InertiaTensorInverse, ref BodyB2.InertiaTensorInverse, ref BodyB3.InertiaTensorInverse);
Vector3Width4 positionA = new Vector3Width4(ref BodyA0.Position, ref BodyA1.Position, ref BodyA2.Position, ref BodyA3.Position);
Vector3Width4 positionB = new Vector3Width4(ref BodyA0.Position, ref BodyB1.Position, ref BodyB2.Position, ref BodyB3.Position);
LinearJacobianA = ContactNormal;
Vector3Width4.Negate(ref ContactNormal, out LinearJacobianB);
Vector3Width4 offsetA, offsetB;
Vector3Width4.Subtract(ref ContactPosition, ref positionA, out offsetA);
Vector3Width4.Subtract(ref ContactPosition, ref positionB, out offsetB);
Vector3Width4.Cross(ref offsetA, ref ContactNormal, out AngularJacobianA);
Vector3Width4.Cross(ref ContactNormal, ref offsetB, out AngularJacobianB);// note negation->parameter reverse
//Allow velocity that closes a gap, and apply penetration correction against positive depth.
//Bounciness not yet included.
PenetrationBias = ContactPenetration * inverseDt;
PenetrationBias = -Vector4.Min(Vector4.Min(PenetrationBias, PenetrationBias * 0.2f), new Vector4(0.2f));
//The inertia tensor is in world space, so no jacobian transformation is required.
Vector3Width4.Multiply(ref LinearJacobianA, ref InverseMassA, out LinearJacobianITA);
Vector3Width4.Multiply(ref LinearJacobianB, ref InverseMassB, out LinearJacobianITB);
Matrix3x3Width4.Transform(ref AngularJacobianA, ref InverseInertiaTensorA, out AngularJacobianITA);
Matrix3x3Width4.Transform(ref AngularJacobianB, ref InverseInertiaTensorB, out AngularJacobianITB);
Vector4 angularContributionA, angularContributionB;
Vector3Width4.Dot(ref AngularJacobianITA, ref AngularJacobianITA, out angularContributionA);
Vector3Width4.Dot(ref AngularJacobianITB, ref AngularJacobianITB, out angularContributionB);
var inverseEffectiveMass = InverseMassA + InverseMassB + angularContributionA + angularContributionB;
Vector4 CollisionSoftness = new Vector4(5);
Softness = CollisionSoftness * inverseEffectiveMass * inverseDt;
EffectiveMass = Vector4.One / (Softness + inverseEffectiveMass);
}