/// <summary>
/// Determines the beam geometry to export after removing invisible geometry.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The beam element to be exported.</param>
/// <param name="geometryElement">The geometry element that contains the beam geometry.</param>
/// <param name="dontExport">An output value that says that the element shouldn't be exported at all.</param>
private static IList <GeometryObject> BeamGeometryToExport(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, out bool dontExport)
{
dontExport = true;
if (element == null || geometryElement == null)
{
return(null);
}
IList <GeometryObject> visibleGeomObjects = new List <GeometryObject>();
{
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
visibleGeomObjects = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, solids, meshes);
// If we found solids and meshes, and they are all invisible, don't export the beam.
// If we didn't find solids and meshes, we won't export the beam with ExportBeamAsStandardElement, but will allow the generic
// family export routine to work.
if ((visibleGeomObjects == null || visibleGeomObjects.Count == 0) && (solids.Count > 0 || meshes.Count > 0))
{
return(null);
}
}
dontExport = false;
return(visibleGeomObjects);
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports a Rebar Coupler,
/// </summary>
/// <param name="exporterIFC">The exporter.</param>
/// <param name="coupler">The RebarCoupler element.</param>
/// <param name="productWrapper">The product wrapper.</param>
public static void ExportCoupler(ExporterIFC exporterIFC, RebarCoupler coupler, ProductWrapper productWrapper)
{
if (coupler == null)
{
return;
}
FamilySymbol familySymbol = ExporterCacheManager.Document.GetElement(coupler.GetTypeId()) as FamilySymbol;
if (familySymbol == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcMechanicalFastener", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
ElementId categoryId = CategoryUtil.GetSafeCategoryId(coupler);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
Options options = GeometryUtil.GetIFCExportGeometryOptions();;
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, coupler, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(coupler.GetTypeId(), false, exportType.ExportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, familySymbol);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
GeometryElement exportGeometry = familySymbol.get_Geometry(options);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
bodyData = BodyExporter.ExportBody(exporterIFC, coupler, categoryId, ElementId.InvalidElementId, exportGeometry, bodyExporterOptions, null);
List <IFCAnyHandle> repMap = new List <IFCAnyHandle>();
IFCAnyHandle origin = ExporterUtil.CreateAxis2Placement3D(file);;
repMap.Add(IFCInstanceExporter.CreateRepresentationMap(file, origin, bodyData.RepresentationHnd));
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, propertySetsOpt, repMap, coupler, familySymbol);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
string applicableOccurrence = NamingUtil.GetObjectTypeOverride(familySymbol, typeObjectType);
if (!string.IsNullOrEmpty(applicableOccurrence))
{
IFCAnyHandleUtil.SetAttribute(styleHandle, "ApplicableOccurrence", applicableOccurrence);
}
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(coupler.GetTypeId(), false, exportType.ExportType, currentTypeInfo);
}
}
int nCouplerQuantity = coupler.GetCouplerQuantity();
if (nCouplerQuantity <= 0)
{
return;
}
ISet <IFCAnyHandle> createdRebarCouplerHandles = new HashSet <IFCAnyHandle>();
string origInstanceName = NamingUtil.GetNameOverride(coupler, NamingUtil.GetIFCName(coupler));
for (int idx = 0; idx < nCouplerQuantity; idx++)
{
string instanceGUID = GUIDUtil.CreateSubElementGUID(coupler, idx);
IFCAnyHandle style = currentTypeInfo.Style;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(style))
{
return;
}
IList <IFCAnyHandle> repMapList = GeometryUtil.GetRepresentationMaps(style);
if (repMapList == null)
{
return;
}
if (repMapList.Count == 0)
{
return;
}
IList <IFCAnyHandle> shapeReps = new List <IFCAnyHandle>();
IFCAnyHandle contextOfItems3d = exporterIFC.Get3DContextHandle("Body");
ISet <IFCAnyHandle> representations = new HashSet <IFCAnyHandle>();
representations.Add(ExporterUtil.CreateDefaultMappedItem(file, repMapList[0], XYZ.Zero));
IFCAnyHandle shapeRep = RepresentationUtil.CreateBodyMappedItemRep(exporterIFC, coupler, categoryId, contextOfItems3d, representations);
shapeReps.Add(shapeRep);
IFCAnyHandle productRepresentation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, shapeReps);
Transform trf = coupler.GetCouplerPositionTransform(idx);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, coupler, trf, null))
{
IFCAnyHandle instanceHandle = null;
IFCExportInfoPair exportMechFastener = new IFCExportInfoPair();
exportMechFastener.SetValueWithPair(IFCEntityType.IfcMechanicalFastener);
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportMechFastener, exporterIFC, coupler, instanceGUID, ownerHistory,
setter.LocalPlacement, productRepresentation);
string instanceName = NamingUtil.GetNameOverride(instanceHandle, coupler, origInstanceName + ": " + idx);
IFCAnyHandleUtil.SetAttribute(instanceHandle, "Name", instanceName);
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// In IFC4 NominalDiameter and NominalLength attributes have been deprecated. PredefinedType attribute was added.
IFCAnyHandleUtil.SetAttribute(instanceHandle, "PredefinedType", Revit.IFC.Export.Toolkit.IFC4.IFCMechanicalFastenerType.USERDEFINED);
}
else
{
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalDiameter", familySymbol.get_Parameter(BuiltInParameter.COUPLER_WIDTH).AsDouble());
IFCAnyHandleUtil.SetAttribute(instanceHandle, "NominalLength", familySymbol.get_Parameter(BuiltInParameter.COUPLER_LENGTH).AsDouble());
}
createdRebarCouplerHandles.Add(instanceHandle);
productWrapper.AddElement(coupler, instanceHandle, setter, null, true);
}
}
string couplerGUID = GUIDUtil.CreateGUID(coupler);
if (nCouplerQuantity > 1)
{
// Create a group to hold all of the created IFC entities, if the coupler aren't already in an assembly.
// We want to avoid nested groups of groups of couplers.
if (coupler.AssemblyInstanceId == ElementId.InvalidElementId)
{
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(coupler, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(coupler, null);
string objectType = NamingUtil.GetObjectTypeOverride(coupler, revitObjectType);
IFCAnyHandle rebarGroup = IFCInstanceExporter.CreateGroup(file, couplerGUID,
ownerHistory, name, description, objectType);
productWrapper.AddElement(coupler, rebarGroup);
IFCInstanceExporter.CreateRelAssignsToGroup(file, GUIDUtil.CreateGUID(), ownerHistory,
null, null, createdRebarCouplerHandles, null, rebarGroup);
}
}
else
{
// We will update the GUID of the one created element to be the element GUID.
// This will allow the IfcGUID parameter to be use/set if appropriate.
ExporterUtil.SetGlobalId(createdRebarCouplerHandles.ElementAt(0), couplerGUID);
}
tr.Commit();
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportGenericElement(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType)
{
if (element == null || geometryElement == null)
{
return(null);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, exportType.ValidatedPredefinedType);
}
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance))
{
return(null);
}
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle instanceHandle = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle styleHandle = null;
instanceHandle = FamilyExporterUtil.ExportGenericInstance(exportType, exporterIFC, element, productWrapper, placementSetter, ecData, guid, ownerHistory,
representation, exportType.ValidatedPredefinedType, null);
if (exportType.ExportType != IFCEntityType.UnKnown)
{
if (element is FamilyInstance)
{
FamilySymbol familySymbol = (element as FamilyInstance).Symbol;
if (familySymbol != null)
{
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, exportType.ValidatedPredefinedType,
propertySetsOpt, repMapListOpt, element, familySymbol);
}
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
styleHandle = ExporterUtil.CreateGenericTypeFromElement(element, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
productWrapper.AddElement(element, instanceHandle, placementSetter.LevelInfo, ecData, true, exportType);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle);
}
}
}
tr.Commit();
}
}
return(instanceHandle);
}
/// <summary>
/// Export the individual part (IfcBuildingElementPart).
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="partElement">The part element to export.</param>
/// <param name="geometryElement">The geometry of part.</param>
/// <param name="productWrapper">The ProductWrapper object.</param>
/// <param name="placementSetter"></param>
/// <param name="originalPlacement"></param>
/// <param name="range"></param>
/// <param name="ifcExtrusionAxes"></param>
/// <param name="hostElement">The host of the part. This can be null.</param>
/// <param name="overrideLevelId">The id of the level that the part is one, overridding other sources.</param>
/// <param name="asBuildingElement">If true, export the Part as a building element instead of an IfcElementPart.</param>
public static void ExportPart(ExporterIFC exporterIFC, Element partElement, ProductWrapper productWrapper,
PlacementSetter placementSetter, IFCAnyHandle originalPlacement, IFCRange range, IFCExtrusionAxes ifcExtrusionAxes,
Element hostElement, ElementId overrideLevelId, bool asBuildingElement)
{
if (!ElementFilteringUtil.IsElementVisible(partElement))
{
return;
}
Part part = partElement as Part;
if (part == null)
{
return;
}
// We don't know how to export a part as a building element if we don't know it's host.
if (asBuildingElement && (hostElement == null))
{
return;
}
if (!asBuildingElement)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementPart;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
else
{
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
}
PlacementSetter standalonePlacementSetter = null;
bool standaloneExport = hostElement == null || asBuildingElement;
ElementId partExportLevelId = (overrideLevelId != null) ? overrideLevelId : null;
if (partExportLevelId == null && standaloneExport)
{
partExportLevelId = partElement.LevelId;
}
if (partExportLevelId == null)
{
if (hostElement == null || (part.OriginalCategoryId != hostElement.Category.Id))
{
return;
}
partExportLevelId = hostElement.LevelId;
}
if (ExporterCacheManager.PartExportedCache.HasExported(partElement.Id, partExportLevelId))
{
return;
}
Options options = GeometryUtil.GetIFCExportGeometryOptions();
View ownerView = partElement.Document.GetElement(partElement.OwnerViewId) as View;
if (ownerView != null)
{
options.View = ownerView;
}
GeometryElement geometryElement = partElement.get_Geometry(options);
if (geometryElement == null)
{
return;
}
try
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
IFCAnyHandle partPlacement = null;
if (standaloneExport)
{
Transform orientationTrf = Transform.Identity;
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, partElement, out overrideContainerHnd);
if (overrideContainerId != ElementId.InvalidElementId && (partExportLevelId == null || partExportLevelId == ElementId.InvalidElementId))
{
partExportLevelId = overrideContainerId;
}
standalonePlacementSetter = PlacementSetter.Create(exporterIFC, partElement, null, orientationTrf, partExportLevelId, overrideContainerHnd);
partPlacement = standalonePlacementSetter.LocalPlacement;
}
else
{
//partPlacement = ExporterUtil.CreateLocalPlacement(file, null, null);
partPlacement = ExporterUtil.CreateLocalPlacement(file, originalPlacement, null);
}
bool validRange = (range != null && !MathUtil.IsAlmostZero(range.Start - range.End));
SolidMeshGeometryInfo solidMeshInfo;
if (validRange)
{
solidMeshInfo = GeometryUtil.GetSplitClippedSolidMeshGeometry(geometryElement, range);
if (solidMeshInfo.GetSolids().Count == 0 && solidMeshInfo.GetMeshes().Count == 0)
{
return;
}
}
else
{
solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
}
using (IFCExtrusionCreationData extrusionCreationData = new IFCExtrusionCreationData())
{
extrusionCreationData.SetLocalPlacement(partPlacement);
extrusionCreationData.ReuseLocalPlacement = false;
extrusionCreationData.PossibleExtrusionAxes = ifcExtrusionAxes;
IList <Solid> solids = new List <Solid>();;
IList <Mesh> meshes = new List <Mesh>();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(partElement.Document, exporterIFC, solidMeshInfo.GetSolids(), solidMeshInfo.GetMeshes());
foreach (GeometryObject gObj in gObjs)
{
if (gObj is Solid)
{
solids.Add(gObj as Solid);
}
else if (gObj is Mesh)
{
meshes.Add(gObj as Mesh);
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(partElement);
ElementId hostCatId = CategoryUtil.GetSafeCategoryId(hostElement);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, solids, meshes,
bodyExporterOptions, extrusionCreationData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, partElement, catId, ElementId.InvalidElementId, geomlist,
bodyExporterOptions, extrusionCreationData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
extrusionCreationData.ClearOpenings();
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geometryElement, Transform.Identity);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string partGUID = GUIDUtil.CreateGUID(partElement);
string ifcEnumType = null;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, hostElement, out ifcEnumType);
IFCAnyHandle ifcPart = null;
if (!asBuildingElement)
{
ifcPart = IFCInstanceExporter.CreateBuildingElementPart(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep);
}
else
{
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcColumn:
ifcPart = IFCInstanceExporter.CreateColumn(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcCovering:
ifcPart = IFCInstanceExporter.CreateCovering(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcFooting:
ifcPart = IFCInstanceExporter.CreateFooting(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcPile:
ifcPart = IFCInstanceExporter.CreatePile(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType, null);
break;
case IFCEntityType.IfcRoof:
ifcPart = IFCInstanceExporter.CreateRoof(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
case IFCEntityType.IfcSlab:
{
// TODO: fix this elsewhere.
if (ExporterUtil.IsNotDefined(ifcEnumType))
{
if (hostCatId == new ElementId(BuiltInCategory.OST_Floors))
{
ifcEnumType = "FLOOR";
}
else if (hostCatId == new ElementId(BuiltInCategory.OST_Roofs))
{
ifcEnumType = "ROOF";
}
}
ifcPart = IFCInstanceExporter.CreateSlab(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
}
break;
case IFCEntityType.IfcWall:
ifcPart = IFCInstanceExporter.CreateWall(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, ifcEnumType);
break;
default:
ifcPart = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, partElement, partGUID, ownerHistory,
extrusionCreationData.GetLocalPlacement(), prodRep, exportType.ValidatedPredefinedType);
break;
}
}
bool containedInLevel = standaloneExport;
PlacementSetter whichPlacementSetter = containedInLevel ? standalonePlacementSetter : placementSetter;
productWrapper.AddElement(partElement, ifcPart, whichPlacementSetter, extrusionCreationData, containedInLevel, exportType);
OpeningUtil.CreateOpeningsIfNecessary(ifcPart, partElement, extrusionCreationData, bodyData.OffsetTransform, exporterIFC,
extrusionCreationData.GetLocalPlacement(), whichPlacementSetter, productWrapper);
//Add the exported part to exported cache.
TraceExportedParts(partElement, partExportLevelId, standaloneExport ? ElementId.InvalidElementId : hostElement.Id);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ifcPart, bodyData.MaterialIds);
transaction.Commit();
}
}
}
finally
{
if (standalonePlacementSetter != null)
{
standalonePlacementSetter.Dispose();
}
}
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportInfoPair exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// CQ_TODO: Clean up this code by at least factoring it out.
// If we are exporting a duct segment, we may need to split it into parts by level. Create a list of ranges.
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
// We will not split duct segments if the assemblyId is set, as we would like to keep the original duct segment
// associated with the assembly, on the level of the assembly.
if ((exportType.ExportType == IFCEntityType.IfcDuctSegmentType) &&
(ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting) &&
(element.AssemblyInstanceId == ElementId.InvalidElementId))
{
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportType, element, out levels,
out ranges);
}
int numPartsToExport = ranges.Count;
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (0 == numPartsToExport)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
BodyData bodyData = null;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
IFCAnyHandle productRepresentation =
RepresentationUtil.CreateAppropriateProductDefinitionShape(
exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType, extraParams,
setter, localPlacementToUse, productRepresentation,
productWrapper);
}
}
}
else
{
for (int ii = 0; ii < numPartsToExport; ii++)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, levels[ii], overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
SolidMeshGeometryInfo solidMeshCapsule =
GeometryUtil.GetClippedSolidMeshGeometry(geometryElement, ranges[ii]);
IList <Solid> solids = solidMeshCapsule.GetSolids();
IList <Mesh> polyMeshes = solidMeshCapsule.GetMeshes();
IList <GeometryObject> geomObjects =
FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document,
exporterIFC, ref solids, ref polyMeshes);
if (geomObjects.Count == 0 && (solids.Count > 0 || polyMeshes.Count > 0))
{
return(false);
}
bool tryToExportAsExtrusion = (!exporterIFC.ExportAs2x2 ||
(exportType.ExportInstance == IFCEntityType.IfcColumn));
if (exportType.ExportInstance == IFCEntityType.IfcColumn)
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
else
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryXYZ;
}
BodyData bodyData = null;
if (geomObjects.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId, geomObjects,
bodyExporterOptions, extraParams);
}
else
{
IList <GeometryObject> exportedGeometries = new List <GeometryObject>();
exportedGeometries.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId,
exportedGeometries, bodyExporterOptions,
extraParams);
}
List <IFCAnyHandle> bodyReps = new List <IFCAnyHandle>();
bodyReps.Add(bodyData.RepresentationHnd);
IFCAnyHandle productRepresentation =
IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null,
null, bodyReps);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType,
extraParams, setter, localPlacementToUse,
productRepresentation, productWrapper);
}
}
}
}
}
tr.Commit();
}
return(true);
}
private static void ExportAsMappedItem(ExporterIFC exporterIFC, Element element, IFCFile file, IFCExportInfoPair exportType, string ifcEnumType, IFCExtrusionCreationData extraParams,
PlacementSetter setter, IFCAnyHandle localPlacementToUse, IFCAnyHandle productRepresentation, ProductWrapper productWrapper)
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
ElementId typeId = element.GetTypeId();
ElementType type = element.Document.GetElement(typeId) as ElementType;
IFCAnyHandle styleHandle = null;
ElementId matId = ElementId.InvalidElementId;
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
bool hasMaterialAssociatedToType = false;
if (type != null)
{
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.FamilySymbolToTypeInfoCache.Find(typeId, false, exportType);
if (!currentTypeInfo.IsValid())
{
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, type);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, propertySetsOpt, repMapListOpt, element, type);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
propertySetsOpt = ExporterUtil.ExtractElementTypeProperties(exporterIFC, type, styleHandle);
productWrapper.RegisterHandleWithElementType(type, exportType, styleHandle, propertySetsOpt);
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.FamilySymbolToTypeInfoCache.Register(typeId, false, exportType, currentTypeInfo);
Element elementType = element.Document.GetElement(element.GetTypeId());
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(element.get_Geometry(geomOptions), exporterIFC, elementType);
if (matId == ElementId.InvalidElementId)
{
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(element.get_Geometry(geomOptions), exporterIFC, element);
}
if (matId != ElementId.InvalidElementId)
{
currentTypeInfo.MaterialIdList = new List <ElementId>()
{
matId
};
hasMaterialAssociatedToType = true;
CategoryUtil.CreateMaterialAssociation(exporterIFC, styleHandle, matId);
}
}
}
else
{
styleHandle = currentTypeInfo.Style;
if (currentTypeInfo.MaterialIdList != null && currentTypeInfo.MaterialIdList.Count > 0)
{
hasMaterialAssociatedToType = true;
}
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
bool roomRelated = !FamilyExporterUtil.IsDistributionFlowElementSubType(exportType);
ElementId roomId = ElementId.InvalidElementId;
if (roomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
}
IFCAnyHandle instanceHandle = null;
// For MEP objects
//string exportEntityStr = exportType.ToString();
//Common.Enums.IFCEntityType exportEntity;
//if (String.Compare(exportEntityStr.Substring(exportEntityStr.Length - 4), "Type", true) == 0)
// exportEntityStr = exportEntityStr.Substring(0, (exportEntityStr.Length - 4));
//if (Enum.TryParse(exportEntityStr, out exportEntity))
//{
// For MEP object creation
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, element, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation);
//}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
return;
}
if (matId == ElementId.InvalidElementId && !hasMaterialAssociatedToType)
{
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(element.get_Geometry(geomOptions), exporterIFC, element);
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, instanceHandle, matId);
}
}
if (roomId != ElementId.InvalidElementId)
{
//exporterIFC.RelateSpatialElement(roomId, instanceHandle);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
productWrapper.AddElement(element, instanceHandle, setter, extraParams, false, exportType);
}
else
{
productWrapper.AddElement(element, instanceHandle, setter, extraParams, true, exportType);
}
OpeningUtil.CreateOpeningsIfNecessary(instanceHandle, element, extraParams, null, exporterIFC, localPlacementToUse, setter, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle);
}
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, element, productWrapper.GetAllObjects());
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
// add to system export cache
// SystemExporter.ExportSystem(exporterIFC, element, instanceHandle);
}
private static void ExportAsMappedItem(ExporterIFC exporterIFC, Element element, IFCFile file, IFCExportType exportType, string ifcEnumType, IFCExtrusionCreationData extraParams,
PlacementSetter setter, IFCAnyHandle localPlacementToUse, IFCAnyHandle productRepresentation, ProductWrapper productWrapper)
{
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
ElementId typeId = element.GetTypeId();
ElementType type = element.Document.GetElement(typeId) as ElementType;
IFCAnyHandle styleHandle = null;
if (type != null)
{
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.TypeObjectsCache.Find(typeId, false, exportType);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, type);
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, propertySetsOpt, repMapListOpt, element, type);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
propertySetsOpt = ExporterUtil.ExtractElementTypeProperties(exporterIFC, type, styleHandle);
productWrapper.RegisterHandleWithElementType(type, styleHandle, propertySetsOpt);
string applicableOccurrence = NamingUtil.GetObjectTypeOverride(type, typeObjectType);
if (!string.IsNullOrEmpty(applicableOccurrence))
{
IFCAnyHandleUtil.SetAttribute(styleHandle, "ApplicableOccurrence", applicableOccurrence);
}
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.TypeObjectsCache.Register(typeId, false, exportType, currentTypeInfo);
}
}
else
{
styleHandle = currentTypeInfo.Style;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
bool roomRelated = !FamilyExporterUtil.IsDistributionFlowElementSubType(exportType);
ElementId roomId = ElementId.InvalidElementId;
if (roomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
}
IFCAnyHandle instanceHandle = null;
// For MEP objects
string exportEntityStr = exportType.ToString();
Common.Enums.IFCEntityType exportEntity;
if (String.Compare(exportEntityStr.Substring(exportEntityStr.Length - 4), "Type", true) == 0)
{
exportEntityStr = exportEntityStr.Substring(0, (exportEntityStr.Length - 4));
}
if (Enum.TryParse(exportEntityStr, out exportEntity))
{
// For MEP object creation
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportEntity, exporterIFC, element, instanceGUID, ownerHistory,
localPlacementToUse, productRepresentation);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
return;
}
if (roomId != ElementId.InvalidElementId)
{
//exporterIFC.RelateSpatialElement(roomId, instanceHandle);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
productWrapper.AddElement(element, instanceHandle, setter, extraParams, false);
}
else
{
productWrapper.AddElement(element, instanceHandle, setter, extraParams, true);
}
OpeningUtil.CreateOpeningsIfNecessary(instanceHandle, element, extraParams, null, exporterIFC, localPlacementToUse, setter, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle);
}
PropertyUtil.CreateInternalRevitPropertySets(exporterIFC, element, productWrapper.GetAllObjects());
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
// add to system export cache
// SystemExporter.ExportSystem(exporterIFC, element, instanceHandle);
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportType exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
BodyData bodyData = null;
IFCAnyHandle productRepresentation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
ElementId typeId = element.GetTypeId();
ElementType type = element.Document.GetElement(typeId) as ElementType;
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.TypeObjectsCache.Find(typeId, false);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeGUID = GUIDUtil.CreateGUID(type);
string typeName = NamingUtil.GetNameOverride(type, NamingUtil.GetIFCName(type));
string typeObjectType = NamingUtil.GetObjectTypeOverride(type, NamingUtil.CreateIFCObjectName(exporterIFC, type));
string applicableOccurence = NamingUtil.GetOverrideStringValue(type, "IfcApplicableOccurrence", typeObjectType);
string typeDescription = NamingUtil.GetDescriptionOverride(type, null);
string typeTag = NamingUtil.GetTagOverride(type, NamingUtil.CreateIFCElementId(type));
string typeElementType = NamingUtil.GetOverrideStringValue(type, "IfcElementType", typeName);
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, typeGUID, typeName,
typeDescription, applicableOccurence, null, repMapListOpt, typeTag, typeElementType, element, type);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
productWrapper.RegisterHandleWithElementType(type, styleHandle, null);
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.TypeObjectsCache.Register(typeId, false, currentTypeInfo);
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.CreateIFCObjectName(exporterIFC, element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
bool roomRelated = !FamilyExporterUtil.IsDistributionFlowElementSubType(exportType);
ElementId roomId = ElementId.InvalidElementId;
if (roomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
}
IFCAnyHandle instanceHandle = null;
// For MEP objects
string exportEntityStr = exportType.ToString();
Common.Enums.IFCEntityType exportEntity;
if (String.Compare(exportEntityStr.Substring(exportEntityStr.Length - 4), "Type", true) == 0)
{
exportEntityStr = exportEntityStr.Substring(0, (exportEntityStr.Length - 4));
}
if (Enum.TryParse(exportEntityStr, out exportEntity))
{
// For MEP object creation
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportEntity, file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceTag);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
return(false);
}
bool relatedToSpace = (roomId != ElementId.InvalidElementId);
productWrapper.AddElement(element, instanceHandle, setter, extraParams, !relatedToSpace);
if (relatedToSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
}
OpeningUtil.CreateOpeningsIfNecessary(instanceHandle, element, extraParams, null,
exporterIFC, localPlacementToUse, setter, productWrapper);
if (currentTypeInfo.IsValid())
{
ExporterCacheManager.TypeRelationsCache.Add(currentTypeInfo.Style, instanceHandle);
}
if (bodyData != null && bodyData.MaterialIds.Count != 0)
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, instanceHandle, bodyData.MaterialIds);
}
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
tr.Commit();
}
}
}
return(true);
}
/// <summary>
/// Exports an element as IFC railing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element to be exported.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportRailing(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRailing;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
Options geomOptions = GeometryUtil.GetIFCExportGeometryOptions();
using (IFCTransaction transaction = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
IFCAnyHandle localPlacement = setter.LocalPlacement;
StairRampContainerInfo stairRampInfo = null;
ElementId hostId = GetStairOrRampHostId(exporterIFC, element as Railing);
Transform inverseTrf = Transform.Identity;
if (hostId != ElementId.InvalidElementId)
{
stairRampInfo = ExporterCacheManager.StairRampContainerInfoCache.GetStairRampContainerInfo(hostId);
IFCAnyHandle stairRampLocalPlacement = stairRampInfo.LocalPlacements[0];
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(stairRampLocalPlacement, localPlacement);
inverseTrf = relTrf.Inverse;
IFCAnyHandle railingLocalPlacement = ExporterUtil.CreateLocalPlacement(file, stairRampLocalPlacement,
inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
localPlacement = railingLocalPlacement;
}
ecData.SetLocalPlacement(localPlacement);
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geomElem);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref solids, ref meshes);
Railing railingElem = element as Railing;
IList <ElementId> subElementIds = CollectSubElements(railingElem);
foreach (ElementId subElementId in subElementIds)
{
Element subElement = railingElem.Document.GetElement(subElementId);
if (subElement != null)
{
GeometryElement subElementGeom = GeometryUtil.GetOneLevelGeometryElement(subElement.get_Geometry(geomOptions), 0);
SolidMeshGeometryInfo subElementSolidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(subElementGeom);
IList <Solid> subElemSolids = subElementSolidMeshInfo.GetSolids();
IList <Mesh> subElemMeshes = subElementSolidMeshInfo.GetMeshes();
IList <GeometryObject> partGObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document, exporterIFC, ref subElemSolids, ref subElemMeshes);
foreach (Solid subElSolid in subElemSolids)
{
solids.Add(subElSolid);
}
foreach (Mesh subElMesh in subElemMeshes)
{
meshes.Add(subElMesh);
}
}
}
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyData bodyData = null;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
if (solids.Count > 0 || meshes.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, solids, meshes, bodyExporterOptions, ecData);
}
else
{
IList <GeometryObject> geomlist = new List <GeometryObject>();
geomlist.Add(geomElem);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId, ElementId.InvalidElementId, geomlist, bodyExporterOptions, ecData);
}
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
if (ecData != null)
{
ecData.ClearOpenings();
}
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(bodyRep);
IList <GeometryObject> geomObjects = new List <GeometryObject>(solids);
foreach (Mesh mesh in meshes)
{
geomObjects.Add(mesh);
}
Transform boundingBoxTrf = (bodyData.OffsetTransform != null) ? bodyData.OffsetTransform.Inverse : Transform.Identity;
boundingBoxTrf = inverseTrf.Multiply(boundingBoxTrf);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, geomObjects, boundingBoxTrf);
if (boundingBoxRep != null)
{
representations.Add(boundingBoxRep);
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCAnyHandle railing = IFCInstanceExporter.CreateRailing(exporterIFC, element, instanceGUID, ownerHistory,
ecData.GetLocalPlacement(), prodRep, ifcEnumType);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(elementClassTypeEnum, ifcEnumType);
bool associateToLevel = (hostId == ElementId.InvalidElementId);
productWrapper.AddElement(element, railing, setter, ecData, associateToLevel, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(railing, element, ecData, bodyData.OffsetTransform,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
CategoryUtil.CreateMaterialAssociation(exporterIFC, railing, bodyData.MaterialIds);
// Create multi-story duplicates of this railing.
if (stairRampInfo != null)
{
stairRampInfo.AddComponent(0, railing);
List <IFCAnyHandle> stairHandles = stairRampInfo.StairOrRampHandles;
for (int ii = 1; ii < stairHandles.Count; ii++)
{
IFCAnyHandle railingLocalPlacement = stairRampInfo.LocalPlacements[ii];
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(railingLocalPlacement))
{
IFCAnyHandle railingHndCopy = CopyRailingHandle(exporterIFC, element, catId, railingLocalPlacement, railing);
stairRampInfo.AddComponent(ii, railingHndCopy);
productWrapper.AddElement(element, railingHndCopy, (IFCLevelInfo)null, ecData, false, exportInfo);
CategoryUtil.CreateMaterialAssociation(exporterIFC, railingHndCopy, bodyData.MaterialIds);
}
}
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(hostId, stairRampInfo);
}
}
transaction.Commit();
}
}
}
