public override void UpdateTransforms()
{
GizmoCap2D cap = _data.Cap;
_data.Circle.Radius = cap.GetRealCircleRadius();
_data.Circle.Center = cap.Position;
}
public void Remove(GizmoCap2D cap)
{
if (Contains(cap))
{
_caps.Remove(cap);
_handleIdToCap.Remove(cap.HandleId);
}
}
public void Add(GizmoCap2D cap)
{
if (!Contains(cap))
{
_caps.Add(cap);
_handleIdToCap.Add(cap.HandleId, cap);
}
}
public override void UpdateTransforms()
{
GizmoCap2D cap = _data.Cap;
_data.Quad.Width = cap.GetRealQuadWidth();
_data.Quad.Height = cap.GetRealQuadHeight();
_data.Quad.Center = cap.Position;
_data.Quad.RotationDegrees = cap.RotationDegrees;
}
public override void UpdateTransforms()
{
GizmoCap2D cap = _data.Cap;
_data.Arrow.Height = cap.GetRealArrowHeight();
_data.Arrow.BaseRadius = cap.GetRealArrowBaseRadius();
_data.Arrow.RotationDegrees = cap.RotationDegrees;
_data.Arrow.BaseCenter = cap.Position;
}
public override void OnAttached()
{
RTUndoRedo.Get.UndoEnd += OnUndoRedoEnd;
RTUndoRedo.Get.RedoEnd += OnUndoRedoEnd;
_leftTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickLeftCenter);
_rightTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickRightCenter);
_topTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickTopCenter);
_bottomTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickBottomCenter);
_backTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickBackCenter);
_frontTick = new GizmoCap2D(Gizmo, GizmoHandleId.BoxTickFrontCenter);
_ticks.Add(_leftTick);
_ticks.Add(_rightTick);
_ticks.Add(_topTick);
_ticks.Add(_bottomTick);
_ticks.Add(_backTick);
_ticks.Add(_frontTick);
_ticks.SetDragSession(_scaleDrag);
SetupSharedLookAndFeel();
SetupSharedSettings();
}
public GizmoLineSlider2D(Gizmo gizmo, int handleId, int capHandleId)
: base(gizmo, handleId)
{
_segmentIndex = Handle.Add2DShape(_segment);
_quadIndex = Handle.Add2DShape(_quad);
_controllerData.Gizmo = Gizmo;
_controllerData.Slider = this;
_controllerData.SliderHandle = Handle;
_controllerData.Segment = _segment;
_controllerData.SegmentIndex = _segmentIndex;
_controllerData.Quad = _quad;
_controllerData.QuadIndex = _quadIndex;
_controllers[(int)GizmoLine2DType.Thin] = new GizmoThinLineSlider2DController(_controllerData);
_controllers[(int)GizmoLine2DType.Box] = new GizmoBoxLineSlider2DController(_controllerData);
_cap2D = new GizmoCap2D(gizmo, capHandleId);
SetupSharedLookAndFeel();
SetDragChannel(GizmoDragChannel.Offset);
AddTargetTransform(Gizmo.Transform);
AddTargetTransform(_transform);
_cap2D.RegisterTransformAsDragTarget(_offsetDrag);
_cap2D.RegisterTransformAsDragTarget(_rotationDrag);
_transform.Changed += OnTransformChanged;
_transform.SetParent(gizmo.Transform);
Gizmo.PreUpdateBegin += OnGizmoPreUpdateBegin;
Gizmo.PreDragUpdate += OnGizmoHandleDragUpdate;
Gizmo.PreDragBeginAttempt += OnGizmoAttemptHandleDragBegin;
Gizmo.PreHoverEnter += OnGizmoHandleHoverEnter;
Gizmo.PreHoverExit += OnGizmoHandleHoverExit;
Gizmo.PostEnabled += OnGizmoPostEnabled;
}
public void ConnectTickLookAndFeel(GizmoCap2D tick, int axisIndex, AxisSign axisSign)
{
tick.SharedLookAndFeel = GetTickLookAndFeel(axisIndex, axisSign);
}
public override void OnAttached()
{
_midCap = new GizmoCap3D(Gizmo, GizmoHandleId.MidDisplayCap);
_midCap.SetHoverable(false);
_xySlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.XYDblSlider);
_yzSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.YZDblSlider);
_zxSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.ZXDblSlider);
_dblSliders.Add(_xySlider);
_dblSliders.Add(_yzSlider);
_dblSliders.Add(_zxSlider);
_pXSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PXSlider, GizmoHandleId.PXCap);
_pXSlider.SetDragChannel(GizmoDragChannel.Offset);
_pXSlider.MapDirection(0, AxisSign.Positive);
_nXSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NXSlider, GizmoHandleId.NXCap);
_nXSlider.SetDragChannel(GizmoDragChannel.Offset);
_nXSlider.MapDirection(0, AxisSign.Negative);
_pYSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PYSlider, GizmoHandleId.PYCap);
_pYSlider.SetDragChannel(GizmoDragChannel.Offset);
_pYSlider.MapDirection(1, AxisSign.Positive);
_nYSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NYSlider, GizmoHandleId.NYCap);
_nYSlider.SetDragChannel(GizmoDragChannel.Offset);
_nYSlider.MapDirection(1, AxisSign.Negative);
_pZSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PZSlider, GizmoHandleId.PZCap);
_pZSlider.SetDragChannel(GizmoDragChannel.Offset);
_pZSlider.MapDirection(2, AxisSign.Positive);
_nZSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NZSlider, GizmoHandleId.NZCap);
_nZSlider.SetDragChannel(GizmoDragChannel.Offset);
_nZSlider.MapDirection(2, AxisSign.Negative);
_axesSliders.Add(_pXSlider);
_axesSliders.Add(_pYSlider);
_axesSliders.Add(_pZSlider);
_axesSliders.Add(_nXSlider);
_axesSliders.Add(_nYSlider);
_axesSliders.Add(_nZSlider);
_axesSliders.Make3DHoverPriorityLowerThan(_xySlider.HoverPriority3D);
_axesSliders.Make3DHoverPriorityLowerThan(_yzSlider.HoverPriority3D);
_axesSliders.Make3DHoverPriorityLowerThan(_zxSlider.HoverPriority3D);
_vertSnapCap = new GizmoCap2D(Gizmo, GizmoHandleId.VertSnap);
_vertSnapCap.SetVisible(false);
_vertSnapCap.DragSession = _vertexSnapDrag;
_vertexSnapDrag.AddTargetTransform(Gizmo.Transform);
_2DModeDblSlider = new GizmoPlaneSlider2D(Gizmo, GizmoHandleId.CamXYSlider);
_2DModeDblSlider.SetDragChannel(GizmoDragChannel.Offset);
_2DModeDblSlider.SetVisible(false);
_p2DModeXSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.PCamXSlider, GizmoHandleId.PCamXCap);
_p2DModeXSlider.SetDragChannel(GizmoDragChannel.Offset);
_p2DModeXSlider.MapDirection(0, AxisSign.Positive);
_p2DModeXSlider.HoverPriority2D.MakeLowerThan(_2DModeDblSlider.HoverPriority2D);
_p2DModeYSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.PCamYSlider, GizmoHandleId.PCamYCap);
_p2DModeYSlider.SetDragChannel(GizmoDragChannel.Offset);
_p2DModeYSlider.MapDirection(1, AxisSign.Positive);
_p2DModeYSlider.HoverPriority2D.MakeLowerThan(_2DModeDblSlider.HoverPriority2D);
_n2DModeXSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.NCamXSlider, GizmoHandleId.NCamXCap);
_n2DModeXSlider.SetDragChannel(GizmoDragChannel.Offset);
_n2DModeXSlider.MapDirection(0, AxisSign.Negative);
_n2DModeXSlider.HoverPriority2D.MakeLowerThan(_2DModeDblSlider.HoverPriority2D);
_n2DModeYSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.NCamYSlider, GizmoHandleId.NCamYCap);
_n2DModeYSlider.SetDragChannel(GizmoDragChannel.Offset);
_n2DModeYSlider.MapDirection(1, AxisSign.Negative);
_n2DModeYSlider.HoverPriority2D.MakeLowerThan(_2DModeDblSlider.HoverPriority2D);
_2DModeSliders.Add(_p2DModeXSlider);
_2DModeSliders.Add(_p2DModeYSlider);
_2DModeSliders.Add(_n2DModeXSlider);
_2DModeSliders.Add(_n2DModeYSlider);
Hide2DModeHandles();
SetupSharedLookAndFeel();
SetupSharedSettings();
}
public override void OnAttached()
{
// Move
_mvXYSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.XYDblSlider);
_mvYZSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.YZDblSlider);
_mvZXSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.ZXDblSlider);
_mvDblSliders.Add(_mvXYSlider);
_mvDblSliders.Add(_mvYZSlider);
_mvDblSliders.Add(_mvZXSlider);
_mvPXSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PXSlider, GizmoHandleId.PXCap);
_mvPXSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvPXSlider.MapDirection(0, AxisSign.Positive);
_mvNXSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NXSlider, GizmoHandleId.NXCap);
_mvNXSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvNXSlider.MapDirection(0, AxisSign.Negative);
_mvPYSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PYSlider, GizmoHandleId.PYCap);
_mvPYSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvPYSlider.MapDirection(1, AxisSign.Positive);
_mvNYSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NYSlider, GizmoHandleId.NYCap);
_mvNYSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvNYSlider.MapDirection(1, AxisSign.Negative);
_mvPZSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.PZSlider, GizmoHandleId.PZCap);
_mvPZSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvPZSlider.MapDirection(2, AxisSign.Positive);
_mvNZSlider = new GizmoLineSlider3D(Gizmo, GizmoHandleId.NZSlider, GizmoHandleId.NZCap);
_mvNZSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvNZSlider.MapDirection(2, AxisSign.Negative);
_mvAxesSliders.Add(_mvPXSlider);
_mvAxesSliders.Add(_mvPYSlider);
_mvAxesSliders.Add(_mvPZSlider);
_mvAxesSliders.Add(_mvNXSlider);
_mvAxesSliders.Add(_mvNYSlider);
_mvAxesSliders.Add(_mvNZSlider);
_mvAxesSliders.Make3DHoverPriorityLowerThan(_mvXYSlider.HoverPriority3D);
_mvAxesSliders.Make3DHoverPriorityLowerThan(_mvYZSlider.HoverPriority3D);
_mvAxesSliders.Make3DHoverPriorityLowerThan(_mvZXSlider.HoverPriority3D);
_mvVertSnapCap = new GizmoCap2D(Gizmo, GizmoHandleId.VertSnap);
_mvVertSnapCap.SetVisible(false);
_mvVertSnapCap.DragSession = _mvVertexSnapDrag;
_mvVertexSnapDrag.AddTargetTransform(Gizmo.Transform);
_mv2DModeDblSlider = new GizmoPlaneSlider2D(Gizmo, GizmoHandleId.CamXYSlider);
_mv2DModeDblSlider.SetDragChannel(GizmoDragChannel.Offset);
_mv2DModeDblSlider.SetVisible(false);
_mvP2DModeXSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.PCamXSlider, GizmoHandleId.PCamXCap);
_mvP2DModeXSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvP2DModeXSlider.MapDirection(0, AxisSign.Positive);
_mvP2DModeXSlider.HoverPriority2D.MakeLowerThan(_mv2DModeDblSlider.HoverPriority2D);
_mvP2DModeYSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.PCamYSlider, GizmoHandleId.PCamYCap);
_mvP2DModeYSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvP2DModeYSlider.MapDirection(1, AxisSign.Positive);
_mvP2DModeYSlider.HoverPriority2D.MakeLowerThan(_mv2DModeDblSlider.HoverPriority2D);
_mvN2DModeXSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.NCamXSlider, GizmoHandleId.NCamXCap);
_mvN2DModeXSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvN2DModeXSlider.MapDirection(0, AxisSign.Negative);
_mvN2DModeXSlider.HoverPriority2D.MakeLowerThan(_mv2DModeDblSlider.HoverPriority2D);
_mvN2DModeYSlider = new GizmoLineSlider2D(Gizmo, GizmoHandleId.NCamYSlider, GizmoHandleId.NCamYCap);
_mvN2DModeYSlider.SetDragChannel(GizmoDragChannel.Offset);
_mvN2DModeYSlider.MapDirection(1, AxisSign.Negative);
_mvN2DModeYSlider.HoverPriority2D.MakeLowerThan(_mv2DModeDblSlider.HoverPriority2D);
_mv2DModeSliders.Add(_mvP2DModeXSlider);
_mv2DModeSliders.Add(_mvP2DModeYSlider);
_mv2DModeSliders.Add(_mvN2DModeXSlider);
_mv2DModeSliders.Add(_mvN2DModeYSlider);
Hide2DModeHandles();
// Rotate
_rtMidCap = new GizmoCap3D(Gizmo, GizmoHandleId.CamXYRotation);
_rtMidCap.DragSession = _rtCamXYRotationDrag;
_rtCamXYRotationDrag.AddTargetTransform(Gizmo.Transform);
_rtXSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.XRotationSlider);
_rtXSlider.SetDragChannel(GizmoDragChannel.Rotation);
_rtXSlider.LocalRotation = Quaternion.Euler(0.0f, 90.0f, 0.0f);
_rtXSlider.SetVisible(false);
_rtAxesSliders.Add(_rtXSlider);
_rtYSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.YRotationSlider);
_rtYSlider.SetDragChannel(GizmoDragChannel.Rotation);
_rtYSlider.LocalRotation = Quaternion.Euler(90.0f, 0.0f, 0.0f);
_rtYSlider.SetVisible(false);
_rtAxesSliders.Add(_rtYSlider);
_rtZSlider = new GizmoPlaneSlider3D(Gizmo, GizmoHandleId.ZRotationSlider);
_rtZSlider.SetDragChannel(GizmoDragChannel.Rotation);
_rtZSlider.SetVisible(false);
_rtAxesSliders.Add(_rtZSlider);
_rtCamLookSlider = new GizmoPlaneSlider2D(Gizmo, GizmoHandleId.CamZRotation);
_rtCamLookSlider.SetDragChannel(GizmoDragChannel.Rotation);
_rtCamLookSlider.SetVisible(false);
// Scale
_scMidCap = new GizmoCap3D(Gizmo, GizmoHandleId.MidScaleCap);
_scMidCap.DragSession = _scUnformScaleDrag;
// Setup hover priorities
_rtAxesSliders.Make3DHoverPriorityHigherThan(_rtMidCap.HoverPriority3D);
_mvAxesSliders.Make3DHoverPriorityHigherThan(_rtXSlider.HoverPriority3D);
_mvDblSliders.Make3DHoverPriorityHigherThan(_mvPXSlider.HoverPriority3D);
_scMidCap.HoverPriority3D.MakeHigherThan(_mvXYSlider.HoverPriority3D);
SetupSharedLookAndFeel();
SetupSharedSettings();
}
public bool Contains(GizmoCap2D cap)
{
return(_handleIdToCap.ContainsKey(cap.HandleId));
}
