/// <summary>
/// Create units path from default unit in the dimension of the current unit system to the running unit instance.
/// </summary>
/// <returns></returns>
public UnitPathStack PathFromDefaultUnit()
{
UnitPathStack Forward = PathToDefaultUnit();
UnitPathStack Backward = new UnitPathStack();
while (Forward.Count > 0)
{
UnitPathItem upi = Forward.Pop();
if (upi.Unit.IsDefaultUnit)
{
upi.Numerator = 1;
upi.Denominator = 1;
//upi.Shift = 0;
}
else
{
upi.Numerator = upi.Unit.ReferenceUnitDenominator; //invert the number
upi.Denominator = upi.Unit.ReferenceUnitNumerator;
//upi.Shift = 0 - upi.Unit.ReferenceUnitShift;
}
Backward.Push(upi);
}
return(Backward);
}
public override bool Equals(object obj)
{
UnitPathItem upi = obj as UnitPathItem;
if (upi != null)
{
if ((this.Unit.GetType() == upi.Unit.GetType()) &&
(this.Numerator == upi.Numerator) &&
(this.Denominator == upi.Denominator))
{
return(true);
}
else
{
return(false);
}
}
else
{
return(false);
}
}
public UnitPathStack PathToSIBaseUnits()
{
if (this.IsStronglyTyped)
{
//get the corresponding unit in the SI System
Type InnerUnitType = Unit.GetDefaultSIUnitTypeOf(this.QuantityType);
if (InnerUnitType == null && this.QuantityType == typeof(PolarLength <>))
{
InnerUnitType = Unit.GetDefaultSIUnitTypeOf(typeof(Length <>));
}
if (InnerUnitType == null)
{
//some quantities don't have strongly typed si units
//like knot unit there are no corresponding velocity unit in SI
// we need to replace the knot unit with mixed unit to be able to do the conversion
// first we should reach default unit
UnitPathStack path = this.PathToDefaultUnit();
//then test the system of the current unit if it was other than Metric.SI
// then we must jump to SI otherwise we are already in default SI
if (this.UnitSystem == "Metric.SI" && this.UnitExponent == 1)
{
//because no unit in SI with exponent = 1 don't have direct unit type
throw new NotImplementedException("Impossible reach by logic");
}
else
{
// We should cross the system boundary
UnitPathItem DefaultPItem;
UnitPathItem RefUPI;
DefaultPItem = path.Peek();
if (DefaultPItem.Unit.ReferenceUnit != null)
{
RefUPI = new UnitPathItem
{
Numerator = DefaultPItem.Unit.ReferenceUnitNumerator,
Denominator = DefaultPItem.Unit.ReferenceUnitDenominator,
//Shift = DefaultPItem.Unit.ReferenceUnitShift,
Unit = DefaultPItem.Unit.ReferenceUnit
};
path.Push(RefUPI);
}
}
return(path);
}
else
{
Unit SIUnit = (Unit)Activator.CreateInstance(InnerUnitType);
SIUnit.UnitExponent = this.UnitExponent;
SIUnit.UnitDimension = this.UnitDimension;
UnitPathStack up = this.PathToUnit(SIUnit);
if (!SIUnit.IsBaseUnit)
{
if (SIUnit.UnitDimension.IsDimensionless && SIUnit.IsStronglyTyped)
{
//for dimensionless units like radian, stradian
//do nothing.
}
else
{
//expand the unit
Unit expandedUnit = ExpandMetricUnit((MetricUnit)SIUnit);
UnitPathStack expath = expandedUnit.PathToSIBaseUnits();
while (expath.Count > 0)
{
up.Push(expath.Pop());
}
}
}
return(up);
}
}
UnitPathStack Pathes = new UnitPathStack();
foreach (Unit un in this.SubUnits)
{
UnitPathStack up = null;
up = un.PathToSIBaseUnits();
while (up.Count > 0)
{
UnitPathItem upi = up.Pop();
if (un.IsInverted)
{
upi.Invert();
}
Pathes.Push(upi);
}
}
return(Pathes);
}
/// <summary>
/// Gets the path to the unit starting from current unit.
/// </summary>
/// <param name="unit"></param>
/// <returns></returns>
public UnitPathStack PathToUnit(Unit unit)
{
lock (CachedPaths)
{
#region Caching
//because this method can be a lengthy method we try to check for cached pathes first.
UnitPathStack cachedPath;
if (EnableUnitsCaching)
{
if (CachedPaths.TryGetValue(UnitToUnitSymbol(this, unit), out cachedPath))
{
return((UnitPathStack)cachedPath.Clone()); //<--- Clone
//Why CLONE :D ?? because the unit path is a stack and I use Pop all the time
// during the application, and there were hidden error that poping from unit path in the
// cached store will not get them back again ;)
// I MUST return cloned copy of the UnitPath.
}
}
#endregion
#region validity of conversion
if (this.UnitDimension.IsDimensionless == true && unit.UnitDimension.IsDimensionless == true)
{
}
else
{
//why I've tested dimensioless in begining??
// because I want special dimensionless quantities like angle and solid angle to be treated
// as normal dimensionless values
if (this.UnitDimension.Equals(unit.UnitDimension) == false)
{
throw new UnitsNotDimensionallyEqualException();
}
}
#endregion
//test if one of the units are not strongly typed
// because this needs special treatment. ;)
if (this.IsStronglyTyped == false || unit.IsStronglyTyped == false)
{
#region Complex units
//the unit is not strongly typed so we need to make conversion to get its conversion
// Source unit ==> SI Base Units
// target unit ==> SI BaseUnits
UnitPathStack SourcePath = this.PathToSIBaseUnits();
UnitPathStack TargetPath = unit.PathToSIBaseUnits();
UnitPathStack Tito = new UnitPathStack();
while (SourcePath.Count > 0)
{
Tito.Push(SourcePath.Pop());
}
//we have to invert the target
while (TargetPath.Count > 0)
{
UnitPathItem upi = TargetPath.Pop();
upi.Invert();
Tito.Push(upi);
}
//first location in cache look below for the second location.
if (EnableUnitsCaching)
{
CachedPaths.Add(UnitToUnitSymbol(this, unit), (UnitPathStack)Tito.Clone());
}
return(Tito);
#endregion
}
// 1- Get Path default unit to current unit.
UnitPathStack FromMeToDefaultUnit = this.PathToDefaultUnit();
// 2- Get Path From Default unit to the passed unit.
UnitPathStack FromDefaultUnitToTargetUnit = unit.PathFromDefaultUnit();
// 3- check if the two units are in the same unit system
// if the units share the same parent don't jump
UnitPathStack SystemsPath = null;
bool NoBoundaryCross = false;
if (this.UnitSystem == unit.UnitSystem)
{
NoBoundaryCross = true;
}
else
{
//test for that units parents are the same
string ThisParent = this.UnitSystem.IndexOf('.') > -1 ?
this.UnitSystem.Substring(0, this.UnitSystem.IndexOf('.')) :
this.UnitSystem;
string TargetParent = unit.UnitSystem.IndexOf('.') > -1 ?
unit.UnitSystem.Substring(0, unit.UnitSystem.IndexOf('.')) :
unit.UnitSystem;
if (ThisParent == TargetParent)
{
NoBoundaryCross = true;
}
}
if (NoBoundaryCross)
{
//no boundary cross should occur
//if the two units starts with Metric then no need to cross boundaries because
//they have common references in metric.
}
else
{
//then we must go out side the current unit system
//all default units are pointing to the SIUnit system this is a must and not option.
//get the default unit of target
// to cross the boundary
// we should know the non SI system that we will cross it
// we have two options
// 1- FromMeToDefaultUnit if (Me unit is another system (not SI)
// in this case we will take the top unit to get its reference
// 2- FromDefaultUnitToTargetUnit (where default unit is not SI)
// and in this case we will take the last bottom unit of stack and get its reference
SystemsPath = new UnitPathStack();
UnitPathItem DefaultPItem;
UnitPathItem RefUPI;
Unit SourceDefaultUnit = FromMeToDefaultUnit.Peek().Unit;
if (SourceDefaultUnit.UnitSystem != "Metric.SI" && SourceDefaultUnit.GetType() != typeof(Shared.Second))
{
//from source default unit to the si
DefaultPItem = FromMeToDefaultUnit.Peek();
RefUPI = new UnitPathItem
{
Numerator = DefaultPItem.Unit.ReferenceUnitNumerator,
Denominator = DefaultPItem.Unit.ReferenceUnitDenominator,
//Shift = DefaultPItem.Unit.ReferenceUnitShift,
Unit = DefaultPItem.Unit.ReferenceUnit
};
}
else
{
// from target default unit to si
DefaultPItem = FromDefaultUnitToTargetUnit.ElementAt(FromDefaultUnitToTargetUnit.Count - 1);
RefUPI = new UnitPathItem
{
//note the difference here
//I made the opposite assignments because we are in reverse manner
Numerator = DefaultPItem.Unit.ReferenceUnitDenominator, // <=== opposite
Denominator = DefaultPItem.Unit.ReferenceUnitNumerator, // <===
//Shift = 0-DefaultPItem.Unit.ReferenceUnitShift,
Unit = DefaultPItem.Unit.ReferenceUnit
};
}
if (RefUPI.Unit != null)
{
SystemsPath.Push(RefUPI);
}
else
{
//both default units were SI units without references
//note:
// when define units in unit cloud for quantity
// either make all units reference SI units without default unit
// or make one default unit and make the rest of units reference it.
}
}
//combine the two paths
UnitPathStack Total = new UnitPathStack();
//we are building the conversion stairs
// will end like a stack
//begin from me unit to default unit
for (int i = FromMeToDefaultUnit.Count - 1; i >= 0; i--)
{
Total.Push(FromMeToDefaultUnit.ElementAt(i));
}
Unit One = new Unit(typeof(DimensionlessQuantity <>));
//cross the system if we need to .
if (SystemsPath != null)
{
Total.Push(new UnitPathItem {
Denominator = 1, Numerator = 1, Unit = One
});
for (int i = SystemsPath.Count - 1; i >= 0; i--)
{
Total.Push(SystemsPath.ElementAt(i));
}
Total.Push(new UnitPathItem {
Denominator = 1, Numerator = 1, Unit = One
});
}
// from default unit to target unit
for (int i = FromDefaultUnitToTargetUnit.Count - 1; i >= 0; i--)
{
Total.Push(FromDefaultUnitToTargetUnit.ElementAt(i));
}
//another check if the units are inverted then
// go through all items in path and invert it also
if (this.IsInverted && unit.IsInverted)
{
foreach (UnitPathItem upi in Total)
{
upi.Invert();
}
}
//Second location in cache look above for the first one in the same function here :D
if (EnableUnitsCaching)
{
CachedPaths.Add(UnitToUnitSymbol(this, unit), (UnitPathStack)Total.Clone());
}
return(Total);
}
}