/// <summary>
/// Initializes a new instance of the <see cref="UniverseSelectionEventArgs"/> class
/// </summary>
/// <param name="universe">The universe that raised this event</param>
/// <param name="configuration">Theconfiguration for the data</param>
/// <param name="dateTimeUtc">The date time this event was fired in UTC</param>
/// <param name="data">The data contained within this event</param>
public UniverseSelectionEventArgs(Universe universe, SubscriptionDataConfig configuration, DateTime dateTimeUtc, IReadOnlyList<BaseData> data)
{
Universe = universe;
Configuration = configuration;
DateTimeUtc = dateTimeUtc;
Data = data;
}
/// <summary>
/// Creates a new universe that restricts the universe selection data to symbols that passed the
/// first universe's selection critera
///
/// NOTE: The <paramref name="second"/> universe instance provided to this method should not be manually
/// added to the algorithm. The <paramref name="first"/> should still be manually (assuming no other changes).
/// </summary>
/// <param name="second">The universe to be filtere</param>
/// <param name="first">The universe providing the set of symbols used for filtered</param>
/// <returns>A new universe that can be added to the algorithm that represents invoking the second
/// using the selections from the first as a filter.</returns>
public static Universe PrefilterUsing(this Universe second, Universe first)
{
return new SelectSymbolsUniverseDecorator(second, (utcTime, data) =>
{
var clone = (BaseDataCollection)data.Clone();
clone.Data = clone.Data.Where(d => first.ContainsMember(d.Symbol)).ToList();
return second.SelectSymbols(utcTime, clone);
});
}
/// <summary>
/// Creates a new universe that logically is the result of wiring the two universes together such that
/// the first will produce subscriptions for the second and the second will only select on data that has
/// passed the first.
///
/// NOTE: The <paramref name="first"/> and <paramref name="second"/> universe instances provided
/// to this method should not be manually added to the algorithm.
/// </summary>
/// <param name="first">The first universe in this 'chain'</param>
/// <param name="second">The second universe in this 'chain'</param>
/// <param name="configurationPerSymbol">True if each symbol as its own configuration, false otherwise</param>
/// <returns>A new universe that can be added to the algorithm that represents invoking the first universe
/// and then the second universe using the outputs of the first. </returns>
public static Universe ChainedTo(this Universe first, Universe second, bool configurationPerSymbol)
{
var prefilteredSecond = second.PrefilterUsing(first);
return new GetSubscriptionRequestsUniverseDecorator(first, (security, currentTimeUtc, maximumEndTimeUtc) =>
{
return first.GetSubscriptionRequests(security, currentTimeUtc, maximumEndTimeUtc).Select(request => new SubscriptionRequest(
template: request,
isUniverseSubscription: true,
universe: prefilteredSecond,
security: security,
configuration: configurationPerSymbol ? new SubscriptionDataConfig(prefilteredSecond.Configuration, symbol: security.Symbol) : prefilteredSecond.Configuration,
startTimeUtc: currentTimeUtc - prefilteredSecond.Configuration.Resolution.ToTimeSpan(),
endTimeUtc: currentTimeUtc.AddSeconds(-1)
));
});
}
/// <summary>
/// Adds a new subscription to provide data for the specified security.
/// </summary>
/// <param name="universe">The universe the subscription is to be added to</param>
/// <param name="security">The security to add a subscription for</param>
/// <param name="utcStartTime">The start time of the subscription</param>
/// <param name="utcEndTime">The end time of the subscription</param>
public bool AddSubscription(Universe universe, Security security, DateTime utcStartTime, DateTime utcEndTime)
{
_fillForwardResolution.Value = ResolveFillForwardResolution(_algorithm);
var subscription = CreateSubscription(universe, _resultHandler, security, utcStartTime, utcEndTime, _fillForwardResolution);
if (subscription == null)
{
// subscription will be null when there's no tradeable dates for the security between the requested times, so
// don't even try to load the data
return false;
}
Log.Debug("FileSystemDataFeed.AddSubscription(): Added " + security.Symbol.ID + " Start: " + utcStartTime + " End: " + utcEndTime);
_subscriptions.AddOrUpdate(subscription.Security.Symbol, subscription);
// prime the pump, run method checks current before move next calls
//PrimeSubscriptionPump(subscription, true);
_changes += SecurityChanges.Added(security);
_fillForwardResolution.Value = ResolveFillForwardResolution(_algorithm);
return true;
}
/// <summary>
/// Initializes a new instance of the <see cref="SelectSymbolsUniverseDecorator"/> class
/// </summary>
/// <param name="universe">The universe to be decorated</param>
/// <param name="selectSymbols">The new implementation of <see cref="SelectSymbols"/></param>
public SelectSymbolsUniverseDecorator(Universe universe, SelectSymbolsDelegate selectSymbols)
: base(universe)
{
_selectSymbols = selectSymbols;
}
/// <summary>
/// Event invocator for the <see cref="UniverseSelection"/> event
/// </summary>
/// <param name="universe">The universe to perform selection on the data</param>
/// <param name="config">The configuration of the universe</param>
/// <param name="dateTimeUtc">The current date time in UTC</param>
/// <param name="data">The universe selection data to be operated on</param>
protected virtual void OnUniverseSelection(Universe universe, SubscriptionDataConfig config, DateTime dateTimeUtc, IReadOnlyList<BaseData> data)
{
if (UniverseSelection != null)
{
var eventArgs = new UniverseSelectionEventArgs(universe, config, dateTimeUtc, data);
var multicast = (MulticastDelegate)UniverseSelection;
foreach (UniverseSelectionHandler handler in multicast.GetInvocationList())
{
_changes += handler(this, eventArgs);
}
}
}
/// <summary>
/// Initializes a new instance of the <see cref="SubscriptionRequest"/> class
/// </summary>
public SubscriptionRequest(bool isUniverseSubscription,
Universe universe,
Security security,
SubscriptionDataConfig configuration,
DateTime startTimeUtc,
DateTime endTimeUtc)
{
IsUniverseSubscription = isUniverseSubscription;
Universe = universe;
Security = security;
Configuration = configuration;
StartTimeUtc = startTimeUtc;
EndTimeUtc = endTimeUtc;
_localStartTime = new Lazy<DateTime>(() => StartTimeUtc.ConvertFromUtc(Configuration.ExchangeTimeZone));
_localEndTime = new Lazy<DateTime>(() => EndTimeUtc.ConvertFromUtc(Configuration.ExchangeTimeZone));
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="universe"></param>
/// <param name="security">The security to create a subscription for</param>
/// <param name="utcStartTime">The start time of the subscription in UTC</param>
/// <param name="utcEndTime">The end time of the subscription in UTC</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(Universe universe, Security security, DateTime utcStartTime, DateTime utcEndTime)
{
Subscription subscription = null;
try
{
var config = security.SubscriptionDataConfig;
var localEndTime = utcEndTime.ConvertFromUtc(security.Exchange.TimeZone);
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, utcStartTime, utcEndTime);
IEnumerator<BaseData> enumerator;
if (config.IsCustomData)
{
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseData>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var currentLocalDate = DateTime.UtcNow.ConvertFromUtc(security.Exchange.TimeZone).Date;
var factory = new BaseDataSubscriptionFactory(config, currentLocalDate, true);
var source = sourceProvider.GetSource(config, currentLocalDate, true);
var factoryReadEnumerator = factory.Read(source).GetEnumerator();
var maximumDataAge = TimeSpan.FromTicks(Math.Max(config.Increment.Ticks, TimeSpan.FromSeconds(5).Ticks));
var fastForward = new FastForwardEnumerator(factoryReadEnumerator, _timeProvider, security.Exchange.TimeZone, maximumDataAge);
return new FrontierAwareEnumerator(fastForward, _timeProvider, timeZoneOffsetProvider);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
_customExchange.AddEnumerator(rateLimit);
var enqueable = new EnqueableEnumerator<BaseData>();
_customExchange.SetHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = enqueable;
}
else if (config.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(config.Increment, security.Exchange.TimeZone, _timeProvider);
_exchange.SetHandler(config.Symbol, data =>
{
aggregator.ProcessData((Tick) data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueableEnumerator<BaseData>();
_exchange.SetHandler(config.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = tickEnumerator;
}
if (config.FillDataForward)
{
// TODO : Properly resolve fill forward resolution like in FileSystemDataFeed (make considerations for universe-only)
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, security.Exchange, _fillForwardResolution, config.ExtendedMarketHours, localEndTime, config.Increment);
}
// define market hours and user filters to incoming data
enumerator = new SubscriptionFilterEnumerator(enumerator, security, localEndTime);
// finally, make our subscriptions aware of the frontier of the data feed, this will help
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(universe, security, enumerator, timeZoneOffsetProvider, utcStartTime, utcEndTime, false);
}
catch (Exception err)
{
Log.Error(err);
}
return subscription;
}
/// <summary>
/// Initializes a new instance of the <see cref="SelectSymbolsUniverseDecorator"/> class
/// </summary>
/// <param name="universe">The universe to be decorated</param>
/// <param name="selectSymbols">The new implementation of <see cref="SelectSymbols"/></param>
public SelectSymbolsUniverseDecorator(Universe universe, SelectSymbolsDelegate selectSymbols)
: base(universe)
{
_selectSymbols = selectSymbols;
}
/// <summary>
/// Creates a new subscription for universe selection
/// </summary>
/// <param name="universe">The universe to add a subscription for</param>
/// <param name="startTimeUtc">The start time of the subscription in utc</param>
/// <param name="endTimeUtc">The end time of the subscription in utc</param>
protected virtual Subscription CreateUniverseSubscription(Universe universe, DateTime startTimeUtc, DateTime endTimeUtc)
{
// TODO : Consider moving the creating of universe subscriptions to a separate, testable class
// grab the relevant exchange hours
var config = universe.Configuration;
var marketHoursDatabase = MarketHoursDatabase.FromDataFolder();
var exchangeHours = marketHoursDatabase.GetExchangeHours(config);
// create a canonical security object
var security = new Security(exchangeHours, config, _algorithm.Portfolio.CashBook[CashBook.AccountCurrency], SymbolProperties.GetDefault(CashBook.AccountCurrency));
var tzOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
IEnumerator<BaseData> enumerator;
var userDefined = universe as UserDefinedUniverse;
if (userDefined != null)
{
Log.Trace("LiveTradingDataFeed.CreateUniverseSubscription(): Creating user defined universe: " + config.Symbol.ToString());
// spoof a tick on the requested interval to trigger the universe selection function
enumerator = userDefined.GetTriggerTimes(startTimeUtc, endTimeUtc, marketHoursDatabase)
.Select(dt => new Tick { Time = dt }).GetEnumerator();
enumerator = new FrontierAwareEnumerator(enumerator, _timeProvider, tzOffsetProvider);
var enqueueable = new EnqueueableEnumerator<BaseData>();
_customExchange.AddEnumerator(new EnumeratorHandler(config.Symbol, enumerator, enqueueable));
enumerator = enqueueable;
}
else if (config.Type == typeof (CoarseFundamental))
{
Log.Trace("LiveTradingDataFeed.CreateUniverseSubscription(): Creating coarse universe: " + config.Symbol.ToString());
// since we're binding to the data queue exchange we'll need to let him
// know that we expect this data
_dataQueueHandler.Subscribe(_job, new[] {security.Symbol});
var enqueable = new EnqueueableEnumerator<BaseData>();
_exchange.SetDataHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
});
enumerator = enqueable;
}
else
{
Log.Trace("LiveTradingDataFeed.CreateUniverseSubscription(): Creating custom universe: " + config.Symbol.ToString());
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseDataCollection>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var dateInDataTimeZone = DateTime.UtcNow.ConvertFromUtc(config.DataTimeZone).Date;
var source = sourceProvider.GetSource(config, dateInDataTimeZone, true);
var factory = SubscriptionFactory.ForSource(source, config, dateInDataTimeZone, false);
var factorEnumerator = factory.Read(source).GetEnumerator();
var fastForward = new FastForwardEnumerator(factorEnumerator, _timeProvider, security.Exchange.TimeZone, config.Increment);
var frontierAware = new FrontierAwareEnumerator(fastForward, _frontierTimeProvider, tzOffsetProvider);
return new BaseDataCollectionAggregatorEnumerator(frontierAware, config.Symbol);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
var enqueueable = new EnqueueableEnumerator<BaseData>();
_customExchange.AddEnumerator(new EnumeratorHandler(config.Symbol, rateLimit, enqueueable));
enumerator = enqueueable;
}
// create the subscription
var subscription = new Subscription(universe, security, enumerator, tzOffsetProvider, startTimeUtc, endTimeUtc, true);
return subscription;
}
/// <summary>
/// Initializes a new instance of the <see cref="UniverseDecorator"/> class
/// </summary>
/// <param name="universe">The decorated universe. All overridable methods delegate to this instance.</param>
protected UniverseDecorator(Universe universe)
: base(universe.Configuration, universe.SecurityInitializer)
{
Universe = universe;
}
/// <summary>
/// Adds a new subscription for universe selection
/// </summary>
/// <param name="universe">The universe to add a subscription for</param>
/// <param name="startTimeUtc">The start time of the subscription in utc</param>
/// <param name="endTimeUtc">The end time of the subscription in utc</param>
public void AddUniverseSubscription(Universe universe, DateTime startTimeUtc, DateTime endTimeUtc)
{
// TODO : Consider moving the creating of universe subscriptions to a separate, testable class
// grab the relevant exchange hours
var config = universe.Configuration;
var exchangeHours = MarketHoursDatabase.FromDataFolder().GetExchangeHours(config);
// create a canonical security object
var security = new Security(exchangeHours, config, universe.SubscriptionSettings.Leverage);
var localStartTime = startTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var localEndTime = endTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
// define our data enumerator
IEnumerator<BaseData> enumerator;
var tradeableDates = Time.EachTradeableDay(security, localStartTime, localEndTime);
var userDefined = universe as UserDefinedUniverse;
if (userDefined != null)
{
// spoof a tick on the requested interval to trigger the universe selection function
enumerator = LinqExtensions.Range(localStartTime, localEndTime, dt => dt + userDefined.Interval)
.Where(dt => security.Exchange.IsOpenDuringBar(dt, dt + userDefined.Interval, config.ExtendedMarketHours))
.Select(dt => new Tick {Time = dt}).GetEnumerator();
}
else
{
// normal reader for all others
enumerator = new SubscriptionDataReader(config, localStartTime, localEndTime, _resultHandler, MapFileResolver.Empty, tradeableDates, false);
}
// create the subscription
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var subscription = new Subscription(universe, security, enumerator, timeZoneOffsetProvider, startTimeUtc, endTimeUtc, true);
// only message the user if it's one of their universe types
var messageUser = subscription.Configuration.Type != typeof(CoarseFundamental);
PrimeSubscriptionPump(subscription, messageUser);
_subscriptions.AddOrUpdate(subscription.Security.Symbol, subscription);
}
/// <summary>
/// Sets the security initializer, used to initialize/configure securities after creation
/// </summary>
/// <param name="securityInitializer">The security initializer</param>
public override void SetSecurityInitializer(ISecurityInitializer securityInitializer)
{
base.SetSecurityInitializer(securityInitializer);
Universe.SetSecurityInitializer(securityInitializer);
FineFundamentalUniverse.SetSecurityInitializer(securityInitializer);
}
/// <summary>
/// Initializes a new instance of the <see cref="FineFundamentalFilteredUniverse"/> class
/// </summary>
/// <param name="universe">The universe to be filtered</param>
/// <param name="fineSelector">The fine selection function</param>
public FineFundamentalFilteredUniverse(Universe universe, Func <IEnumerable <FineFundamental>, IEnumerable <Symbol> > fineSelector)
: base(universe, universe.SelectSymbols)
{
FineFundamentalUniverse = new FineFundamentalUniverse(universe.UniverseSettings, universe.SecurityInitializer, fineSelector);
FineFundamentalUniverse.SelectionChanged += (sender, args) => OnSelectionChanged(((SelectionEventArgs)args).CurrentSelection);
}
/// <summary>
/// Creates a new subscription for the specified security
/// </summary>
/// <param name="universe"></param>
/// <param name="security">The security to create a subscription for</param>
/// <param name="config">The subscription config to be added</param>
/// <param name="utcStartTime">The start time of the subscription in UTC</param>
/// <param name="utcEndTime">The end time of the subscription in UTC</param>
/// <returns>A new subscription instance of the specified security</returns>
protected Subscription CreateSubscription(Universe universe, Security security, SubscriptionDataConfig config, DateTime utcStartTime, DateTime utcEndTime)
{
Subscription subscription = null;
try
{
var localEndTime = utcEndTime.ConvertFromUtc(security.Exchange.TimeZone);
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, utcStartTime, utcEndTime);
IEnumerator<BaseData> enumerator;
if (config.IsCustomData)
{
if (!Quandl.IsAuthCodeSet)
{
// we're not using the SubscriptionDataReader, so be sure to set the auth token here
Quandl.SetAuthCode(Config.Get("quandl-auth-token"));
}
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseData>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var dateInDataTimeZone = DateTime.UtcNow.ConvertFromUtc(config.DataTimeZone).Date;
var source = sourceProvider.GetSource(config, dateInDataTimeZone, true);
var factory = SubscriptionDataSourceReader.ForSource(source, config, dateInDataTimeZone, false);
var factoryReadEnumerator = factory.Read(source).GetEnumerator();
var maximumDataAge = TimeSpan.FromTicks(Math.Max(config.Increment.Ticks, TimeSpan.FromSeconds(5).Ticks));
return new FastForwardEnumerator(factoryReadEnumerator, _timeProvider, security.Exchange.TimeZone, maximumDataAge);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
var frontierAware = new FrontierAwareEnumerator(rateLimit, _timeProvider, timeZoneOffsetProvider);
_customExchange.AddEnumerator(config.Symbol, frontierAware);
var enqueable = new EnqueueableEnumerator<BaseData>();
_customExchange.SetDataHandler(config.Symbol, data =>
{
enqueable.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = enqueable;
}
else if (config.Resolution != Resolution.Tick)
{
// this enumerator allows the exchange to pump ticks into the 'back' of the enumerator,
// and the time sync loop can pull aggregated trade bars off the front
var aggregator = new TradeBarBuilderEnumerator(config.Increment, security.Exchange.TimeZone, _timeProvider);
_exchange.SetDataHandler(config.Symbol, data =>
{
aggregator.ProcessData((Tick) data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = aggregator;
}
else
{
// tick subscriptions can pass right through
var tickEnumerator = new EnqueueableEnumerator<BaseData>();
_exchange.SetDataHandler(config.Symbol, data =>
{
tickEnumerator.Enqueue(data);
if (subscription != null) subscription.RealtimePrice = data.Value;
});
enumerator = tickEnumerator;
}
if (config.FillDataForward)
{
enumerator = new LiveFillForwardEnumerator(_frontierTimeProvider, enumerator, security.Exchange, _fillForwardResolution, config.ExtendedMarketHours, localEndTime, config.Increment);
}
// define market hours and user filters to incoming data
if (config.IsFilteredSubscription)
{
enumerator = new SubscriptionFilterEnumerator(enumerator, security, localEndTime);
}
// finally, make our subscriptions aware of the frontier of the data feed, prevents future data from spewing into the feed
enumerator = new FrontierAwareEnumerator(enumerator, _frontierTimeProvider, timeZoneOffsetProvider);
subscription = new Subscription(universe, security, config, enumerator, timeZoneOffsetProvider, utcStartTime, utcEndTime, false);
}
catch (Exception err)
{
Log.Error(err);
}
return subscription;
}
/// <summary>
/// Adds a new subscription for universe selection
/// </summary>
/// <param name="universe">The universe to add a subscription for</param>
/// <param name="startTimeUtc">The start time of the subscription in utc</param>
/// <param name="endTimeUtc">The end time of the subscription in utc</param>
public void AddUniverseSubscription(Universe universe, DateTime startTimeUtc, DateTime endTimeUtc)
{
// TODO : Consider moving the creating of universe subscriptions to a separate, testable class
// grab the relevant exchange hours
var config = universe.Configuration;
var marketHoursDatabase = MarketHoursDatabase.FromDataFolder();
var exchangeHours = marketHoursDatabase.GetExchangeHours(config);
// create a canonical security object
var security = new Security(exchangeHours, config);
var localStartTime = startTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var localEndTime = endTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
// define our data enumerator
IEnumerator<BaseData> enumerator;
var tradeableDates = Time.EachTradeableDay(security, localStartTime, localEndTime);
var userDefined = universe as UserDefinedUniverse;
if (userDefined != null)
{
// spoof a tick on the requested interval to trigger the universe selection function
enumerator = userDefined.GetTriggerTimes(startTimeUtc, endTimeUtc, marketHoursDatabase)
.Select(x => new Tick { Time = x, Symbol = config.Symbol }).GetEnumerator();
// route these custom subscriptions through the exchange for buffering
var enqueueable = new EnqueueableEnumerator<BaseData>(true);
// add this enumerator to our exchange
ScheduleEnumerator(enumerator, enqueueable, GetLowerThreshold(config.Resolution), GetUpperThreshold(config.Resolution));
enumerator = enqueueable;
}
else if (config.Type == typeof (CoarseFundamental))
{
var cf = new CoarseFundamental();
var enqueueable = new EnqueueableEnumerator<BaseData>(true);
// load coarse data day by day
var coarse = from date in Time.EachTradeableDay(security, _algorithm.StartDate, _algorithm.EndDate)
let dateInDataTimeZone = date.ConvertTo(config.ExchangeTimeZone, config.DataTimeZone).Date
let factory = new BaseDataSubscriptionFactory(config, dateInDataTimeZone, false)
let source = cf.GetSource(config, dateInDataTimeZone, false)
let coarseFundamentalForDate = factory.Read(source)
select new BaseDataCollection(date, config.Symbol, coarseFundamentalForDate);
ScheduleEnumerator(coarse.GetEnumerator(), enqueueable, 5, 100000, 2);
enumerator = enqueueable;
}
else
{
// normal reader for all others
enumerator = new SubscriptionDataReader(config, localStartTime, localEndTime, _resultHandler, MapFileResolver.Empty, _factorFileProvider, tradeableDates, false);
// route these custom subscriptions through the exchange for buffering
var enqueueable = new EnqueueableEnumerator<BaseData>(true);
// add this enumerator to our exchange
ScheduleEnumerator(enumerator, enqueueable, GetLowerThreshold(config.Resolution), GetUpperThreshold(config.Resolution));
enumerator = enqueueable;
}
// create the subscription
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var subscription = new Subscription(universe, security, enumerator, timeZoneOffsetProvider, startTimeUtc, endTimeUtc, true);
_subscriptions.AddOrUpdate(subscription.Security.Symbol, subscription);
}
/// <summary>
/// Applies universe selection the the data feed and algorithm
/// </summary>
/// <param name="universe">The universe to perform selection on</param>
/// <param name="dateTimeUtc">The current date time in utc</param>
/// <param name="universeData">The data provided to perform selection with</param>
public SecurityChanges ApplyUniverseSelection(Universe universe, DateTime dateTimeUtc, BaseDataCollection universeData)
{
var settings = universe.SubscriptionSettings;
var limit = 1000; //daily/hourly limit
var resolution = settings.Resolution;
switch (resolution)
{
case Resolution.Tick:
limit = _algorithm.Securities.TickLimit;
break;
case Resolution.Second:
limit = _algorithm.Securities.SecondLimit;
break;
case Resolution.Minute:
limit = _algorithm.Securities.MinuteLimit;
break;
}
// subtract current subscriptions that can't be removed
limit -= _algorithm.Securities.Count(x => x.Value.Resolution == resolution && x.Value.HoldStock);
if (limit < 1)
{
// if we don't have room for more securities then we can't really do anything here.
_algorithm.Error("Unable to add more securities from universe selection due to holding stock.");
return SecurityChanges.None;
}
// perform initial filtering and limit the result
var selectSymbolsResult = universe.SelectSymbols(dateTimeUtc, universeData.Data);
// check for no changes first
if (ReferenceEquals(selectSymbolsResult, Universe.Unchanged))
{
return SecurityChanges.None;
}
var selections = selectSymbolsResult.Take(limit).ToHashSet();
// create a hash set of our existing subscriptions by sid
var existingSubscriptions = _dataFeed.Subscriptions.ToHashSet(x => x.Security.Symbol);
var additions = new List<Security>();
var removals = new List<Security>();
// determine which data subscriptions need to be removed for this market
foreach (var subscription in _dataFeed.Subscriptions)
{
// universes can only remove members of their own
if (!universe.ContainsMember(subscription.Security)) continue;
// never remove universe selection subscriptions
if (subscription.IsUniverseSelectionSubscription) continue;
var config = subscription.Configuration;
// never remove internal feeds
if (config.IsInternalFeed) continue;
// if we've selected this subscription again, keep it
if (selections.Contains(config.Symbol)) continue;
// let the algorithm know this security has been removed from the universe
removals.Add(subscription.Security);
// but don't physically remove it from the algorithm if we hold stock or have open orders against it
var openOrders = _algorithm.Transactions.GetOrders(x => x.Status.IsOpen() && x.Symbol == config.Symbol);
if (!subscription.Security.HoldStock && !openOrders.Any())
{
// we need to mark this security as untradeable while it has no data subscription
// it is expected that this function is called while in sync with the algo thread,
// so we can make direct edits to the security here
subscription.Security.Cache.Reset();
if (_dataFeed.RemoveSubscription(subscription))
{
universe.RemoveMember(subscription.Security);
}
}
}
// find new selections and add them to the algorithm
foreach (var symbol in selections)
{
// we already have a subscription for this symbol so don't re-add it
if (existingSubscriptions.Contains(symbol)) continue;
// create the new security, the algorithm thread will add this at the appropriate time
Security security;
if (!_algorithm.Securities.TryGetValue(symbol, out security))
{
security = SecurityManager.CreateSecurity(_algorithm.Portfolio, _algorithm.SubscriptionManager, _marketHoursDatabase,
symbol,
settings.Resolution,
settings.FillForward,
settings.Leverage,
settings.ExtendedMarketHours,
false,
false,
false);
}
additions.Add(security);
// add the new subscriptions to the data feed
if (_dataFeed.AddSubscription(universe, security, dateTimeUtc, _algorithm.EndDate.ConvertToUtc(_algorithm.TimeZone)))
{
universe.AddMember(security);
}
}
// return None if there's no changes, otherwise return what we've modified
return additions.Count + removals.Count != 0
? new SecurityChanges(additions, removals)
: SecurityChanges.None;
}
/// <summary>
/// Applies universe selection the the data feed and algorithm
/// </summary>
/// <param name="universe">The universe to perform selection on</param>
/// <param name="dateTimeUtc">The current date time in utc</param>
/// <param name="universeData">The data provided to perform selection with</param>
public SecurityChanges ApplyUniverseSelection(Universe universe, DateTime dateTimeUtc, BaseDataCollection universeData)
{
// perform initial filtering and limit the result
var selectSymbolsResult = universe.PerformSelection(dateTimeUtc, universeData);
// check for no changes first
if (ReferenceEquals(selectSymbolsResult, Universe.Unchanged))
{
return SecurityChanges.None;
}
// materialize the enumerable into a set for processing
var selections = selectSymbolsResult.ToHashSet();
var additions = new List<Security>();
var removals = new List<Security>();
var algorithmEndDateUtc = _algorithm.EndDate.ConvertToUtc(_algorithm.TimeZone);
// determine which data subscriptions need to be removed from this universe
foreach (var member in universe.Members.Values)
{
// if we've selected this subscription again, keep it
if (selections.Contains(member.Symbol)) continue;
// don't remove if the universe wants to keep him in
if (!universe.CanRemoveMember(dateTimeUtc, member)) continue;
// remove the member - this marks this member as not being
// selected by the universe, but it may remain in the universe
// until open orders are closed and the security is liquidated
removals.Add(member);
// but don't physically remove it from the algorithm if we hold stock or have open orders against it
var openOrders = _algorithm.Transactions.GetOrders(x => x.Status.IsOpen() && x.Symbol == member.Symbol);
if (!member.HoldStock && !openOrders.Any())
{
// safe to remove the member from the universe
universe.RemoveMember(dateTimeUtc, member);
// we need to mark this security as untradeable while it has no data subscription
// it is expected that this function is called while in sync with the algo thread,
// so we can make direct edits to the security here
member.Cache.Reset();
foreach (var subscription in universe.GetSubscriptionRequests(member, dateTimeUtc, algorithmEndDateUtc))
{
if (subscription.IsUniverseSubscription)
{
removals.Remove(member);
}
else
{
_dataFeed.RemoveSubscription(subscription.Configuration);
}
}
// remove symbol mappings for symbols removed from universes // TODO : THIS IS BAD!
SymbolCache.TryRemove(member.Symbol);
}
}
// find new selections and add them to the algorithm
foreach (var symbol in selections)
{
// create the new security, the algorithm thread will add this at the appropriate time
Security security;
if (!_algorithm.Securities.TryGetValue(symbol, out security))
{
security = universe.CreateSecurity(symbol, _algorithm, _marketHoursDatabase, _symbolPropertiesDatabase);
}
var addedMember = universe.AddMember(dateTimeUtc, security);
var addedSubscription = false;
foreach (var request in universe.GetSubscriptionRequests(security, dateTimeUtc, algorithmEndDateUtc))
{
// ask the limiter if we can add another subscription at that resolution
string reason;
if (!_limiter.CanAddSubscription(request.Configuration.Resolution, out reason))
{
// should we be counting universe subscriptions against user subscriptions limits?
_algorithm.Error(reason);
Log.Trace("UniverseSelection.ApplyUniverseSelection(): Skipping adding subscription: " + request.Configuration.Symbol.ToString() + ": " + reason);
continue;
}
// add the new subscriptions to the data feed
_dataFeed.AddSubscription(request);
// only update our security changes if we actually added data
if (!request.IsUniverseSubscription)
{
addedSubscription = addedMember;
}
}
if (addedSubscription)
{
additions.Add(security);
}
}
// Add currency data feeds that weren't explicitly added in Initialize
if (additions.Count > 0)
{
var addedSecurities = _algorithm.Portfolio.CashBook.EnsureCurrencyDataFeeds(_algorithm.Securities, _algorithm.SubscriptionManager, _marketHoursDatabase, _symbolPropertiesDatabase, _algorithm.BrokerageModel.DefaultMarkets);
foreach (var security in addedSecurities)
{
// assume currency feeds are always one subscription per, these are typically quote subscriptions
_dataFeed.AddSubscription(new SubscriptionRequest(false, universe, security, security.Subscriptions.First(), dateTimeUtc, algorithmEndDateUtc));
}
}
// return None if there's no changes, otherwise return what we've modified
var securityChanges = additions.Count + removals.Count != 0
? new SecurityChanges(additions, removals)
: SecurityChanges.None;
if (securityChanges != SecurityChanges.None)
{
Log.Debug("UniverseSelection.ApplyUniverseSelection(): " + dateTimeUtc + ": " + securityChanges);
}
return securityChanges;
}
/// <summary>
/// Initializes a new instance of the <see cref="FineFundamentalFilteredUniverse"/> class
/// </summary>
/// <param name="universe">The universe to be filtered</param>
/// <param name="fineSelector">The fine selection function</param>
public FineFundamentalFilteredUniverse(Universe universe, Func <IEnumerable <FineFundamental>, IEnumerable <Symbol> > fineSelector)
: base(universe, universe.SelectSymbols)
{
FineFundamentalUniverse = new FineFundamentalUniverse(universe.UniverseSettings, universe.SecurityInitializer, fineSelector);
}
/// <summary>
/// Initializes a new instance of the <see cref="SubscriptionRequest"/> class
/// </summary>
public SubscriptionRequest(SubscriptionRequest template,
bool? isUniverseSubscription = null,
Universe universe = null,
Security security = null,
SubscriptionDataConfig configuration = null,
DateTime? startTimeUtc = null,
DateTime? endTimeUtc = null
)
: this(isUniverseSubscription ?? template.IsUniverseSubscription,
universe ?? template.Universe,
security ?? template.Security,
configuration ?? template.Configuration,
startTimeUtc ?? template.StartTimeUtc,
endTimeUtc ?? template.EndTimeUtc
)
{
}
/// <summary>
/// Initializes a new instance of the <see cref="UniverseDecorator"/> class
/// </summary>
/// <param name="universe">The decorated universe. All overridable methods delegate to this instance.</param>
protected UniverseDecorator(Universe universe)
: base(universe.Configuration, universe.SecurityInitializer)
{
Universe = universe;
}
/// <summary>
/// Adds a new subscription to provide data for the specified security.
/// </summary>
/// <param name="universe">The universe the subscription is to be added to</param>
/// <param name="security">The security to add a subscription for</param>
/// <param name="utcStartTime">The start time of the subscription</param>
/// <param name="utcEndTime">The end time of the subscription</param>
/// <returns>True if the subscription was created and added successfully, false otherwise</returns>
public bool AddSubscription(Universe universe, Security security, DateTime utcStartTime, DateTime utcEndTime)
{
// create and add the subscription to our collection
var subscription = CreateSubscription(universe, security, utcStartTime, utcEndTime);
// for some reason we couldn't create the subscription
if (subscription == null)
{
Log.Trace("Unable to add subscription for: " + security.Symbol.ToString());
return false;
}
Log.Trace("LiveTradingDataFeed.AddSubscription(): Added " + security.Symbol.ToString());
_subscriptions[subscription.Security.Symbol] = subscription;
// send the subscription for the new symbol through to the data queuehandler
// unless it is custom data, custom data is retrieved using the same as backtest
if (!subscription.Configuration.IsCustomData)
{
_dataQueueHandler.Subscribe(_job, new Dictionary<SecurityType, List<Symbol>>
{
{security.Type, new List<Symbol> {security.Symbol}}
});
}
// keep track of security changes, we emit these to the algorithm
// as notifications, used in universe selection
_changes += SecurityChanges.Added(security);
// update our fill forward resolution setting
_fillForwardResolution.Value = ResolveFillForwardResolution(_algorithm);
return true;
}
private Subscription CreateSubscription(Universe universe, Security security, DateTime startTimeUtc, DateTime endTimeUtc)
{
var config = security.SubscriptionDataConfig;
var localStartTime = startTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var localEndTime = endTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var tradeableDates = Time.EachTradeableDay(security, localStartTime, localEndTime);
// ReSharper disable once PossibleMultipleEnumeration
if (!tradeableDates.Any())
{
_algorithm.Error(string.Format("No data loaded for {0} because there were no tradeable dates for this security.", security.Symbol));
return null;
}
// get the map file resolver for this market
var mapFileResolver = MapFileResolver.Empty;
if (config.SecurityType == SecurityType.Equity) mapFileResolver = _mapFileProvider.Get(config.Market);
// ReSharper disable once PossibleMultipleEnumeration
var enumerator = CreateSubscriptionEnumerator(security, config, localStartTime, localEndTime, mapFileResolver, tradeableDates);
var enqueueable = new EnqueueableEnumerator<BaseData>(true);
// add this enumerator to our exchange
ScheduleEnumerator(enumerator, enqueueable, GetLowerThreshold(config.Resolution), GetUpperThreshold(config.Resolution));
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var subscription = new Subscription(universe, security, enqueueable, timeZoneOffsetProvider, startTimeUtc, endTimeUtc, false);
return subscription;
}
/// <summary>
/// Creates a new subscription for universe selection
/// </summary>
/// <param name="universe">The universe to add a subscription for</param>
/// <param name="startTimeUtc">The start time of the subscription in utc</param>
/// <param name="endTimeUtc">The end time of the subscription in utc</param>
protected virtual Subscription CreateUniverseSubscription(Universe universe, DateTime startTimeUtc, DateTime endTimeUtc)
{
// TODO : Consider moving the creating of universe subscriptions to a separate, testable class
// grab the relevant exchange hours
var config = universe.Configuration;
var exchangeHours = MarketHoursDatabase.FromDataFolder().GetExchangeHours(universe.Market, config.Symbol, universe.SecurityType);
var localStartTime = startTimeUtc.ConvertFromUtc(exchangeHours.TimeZone);
var localEndTime = endTimeUtc.ConvertFromUtc(exchangeHours.TimeZone);
// create a canonical security object
var security = new Security(exchangeHours, config, universe.SubscriptionSettings.Leverage);
IEnumerator<BaseData> enumerator;
var userDefined = universe as UserDefinedUniverse;
if (userDefined != null)
{
// spoof a tick on the requested interval to trigger the universe selection function
enumerator = LinqExtensions.Range(localStartTime, localEndTime, dt => dt + userDefined.Interval)
.Where(dt => security.Exchange.IsOpenDuringBar(dt, dt + userDefined.Interval, config.ExtendedMarketHours))
.Select(dt => new Tick { Time = dt }).GetEnumerator();
}
else if (config.Type == typeof (CoarseFundamental))
{
// since we're binding to the data queue exchange we'll need to let him
// know that we expect this data
_dataQueueHandler.Subscribe(_job, new Dictionary<SecurityType, List<Symbol>>
{
{config.SecurityType, new List<Symbol>{config.Symbol}}
});
var enqueable = new EnqueableEnumerator<BaseData>();
_exchange.SetHandler(config.Symbol, data =>
{
var universeData = data as BaseDataCollection;
if (universeData != null)
{
enqueable.EnqueueRange(universeData.Data);
}
});
enumerator = enqueable;
}
else
{
// each time we exhaust we'll new up this enumerator stack
var refresher = new RefreshEnumerator<BaseDataCollection>(() =>
{
var sourceProvider = (BaseData)Activator.CreateInstance(config.Type);
var currentLocalDate = DateTime.UtcNow.ConvertFromUtc(security.Exchange.TimeZone).Date;
var factory = new BaseDataSubscriptionFactory(config, currentLocalDate, true);
var source = sourceProvider.GetSource(config, currentLocalDate, true);
var factorEnumerator = factory.Read(source).GetEnumerator();
var fastForward = new FastForwardEnumerator(factorEnumerator, _timeProvider, security.Exchange.TimeZone, config.Increment);
var tzOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var frontierAware = new FrontierAwareEnumerator(fastForward, _frontierTimeProvider, tzOffsetProvider);
return new BaseDataCollectionAggregatorEnumerator(frontierAware, config.Symbol);
});
// rate limit the refreshing of the stack to the requested interval
var minimumTimeBetweenCalls = Math.Min(config.Increment.Ticks, TimeSpan.FromMinutes(30).Ticks);
var rateLimit = new RateLimitEnumerator(refresher, _timeProvider, TimeSpan.FromTicks(minimumTimeBetweenCalls));
_customExchange.AddEnumerator(rateLimit);
var enqueable = new EnqueableEnumerator<BaseData>();
_customExchange.SetHandler(config.Symbol, data =>
{
var universeData = data as BaseDataCollection;
if (universeData != null)
{
enqueable.EnqueueRange(universeData.Data);
}
else
{
enqueable.Enqueue(data);
}
});
enumerator = enqueable;
}
// create the subscription
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var subscription = new Subscription(universe, security, enumerator, timeZoneOffsetProvider, startTimeUtc, endTimeUtc, true);
return subscription;
}
/// <summary>
/// Initializes a new instance of the <see cref="GetSubscriptionRequestsUniverseDecorator"/> class
/// </summary>
/// <param name="universe">The universe to be decorated</param>
/// <param name="getRequests"></param>
public GetSubscriptionRequestsUniverseDecorator(Universe universe, GetSubscriptionRequestsDelegate getRequests)
: base(universe)
{
_getRequests = getRequests;
}
/// <summary>
/// Applies universe selection the the data feed and algorithm
/// </summary>
/// <param name="universe">The universe to perform selection on</param>
/// <param name="dateTimeUtc">The current date time in utc</param>
/// <param name="universeData">The data provided to perform selection with</param>
public SecurityChanges ApplyUniverseSelection(Universe universe, DateTime dateTimeUtc, BaseDataCollection universeData)
{
var settings = universe.UniverseSettings;
// perform initial filtering and limit the result
var selectSymbolsResult = universe.PerformSelection(dateTimeUtc, universeData);
// check for no changes first
if (ReferenceEquals(selectSymbolsResult, Universe.Unchanged))
{
return SecurityChanges.None;
}
// materialize the enumerable into a set for processing
var selections = selectSymbolsResult.ToHashSet();
// create a hash set of our existing subscriptions by sid
var existingSubscriptions = _dataFeed.Subscriptions.ToHashSet(x => x.Security.Symbol);
var additions = new List<Security>();
var removals = new List<Security>();
// determine which data subscriptions need to be removed from this universe
foreach (var member in universe.Members.Values)
{
var config = member.SubscriptionDataConfig;
// if we've selected this subscription again, keep it
if (selections.Contains(config.Symbol)) continue;
// don't remove if the universe wants to keep him in
if (!universe.CanRemoveMember(dateTimeUtc, member)) continue;
// remove the member - this marks this member as not being
// selected by the universe, but it may remain in the universe
// until open orders are closed and the security is liquidated
removals.Add(member);
// but don't physically remove it from the algorithm if we hold stock or have open orders against it
var openOrders = _algorithm.Transactions.GetOrders(x => x.Status.IsOpen() && x.Symbol == config.Symbol);
if (!member.HoldStock && !openOrders.Any())
{
// safe to remove the member from the universe
universe.RemoveMember(dateTimeUtc, member);
// we need to mark this security as untradeable while it has no data subscription
// it is expected that this function is called while in sync with the algo thread,
// so we can make direct edits to the security here
member.Cache.Reset();
_dataFeed.RemoveSubscription(member.Symbol);
}
}
// find new selections and add them to the algorithm
foreach (var symbol in selections)
{
// we already have a subscription for this symbol so don't re-add it
if (existingSubscriptions.Contains(symbol)) continue;
// ask the limiter if we can add another subscription at that resolution
string reason;
if (!_limiter.CanAddSubscription(settings.Resolution, out reason))
{
_algorithm.Error(reason);
Log.Trace("UniverseSelection.ApplyUniverseSelection(): Skipping adding subscriptions: " + reason);
break;
}
// create the new security, the algorithm thread will add this at the appropriate time
Security security;
if (!_algorithm.Securities.TryGetValue(symbol, out security))
{
security = SecurityManager.CreateSecurity(_algorithm.Portfolio, _algorithm.SubscriptionManager, _marketHoursDatabase, _symbolPropertiesDatabase, universe.SecurityInitializer,
symbol,
settings.Resolution,
settings.FillForward,
settings.Leverage,
settings.ExtendedMarketHours,
false,
false,
false);
}
additions.Add(security);
// add the new subscriptions to the data feed
if (_dataFeed.AddSubscription(universe, security, dateTimeUtc, _algorithm.EndDate.ConvertToUtc(_algorithm.TimeZone)))
{
universe.AddMember(dateTimeUtc, security);
}
}
// Add currency data feeds that weren't explicitly added in Initialize
if (additions.Count > 0)
{
var addedSecurities = _algorithm.Portfolio.CashBook.EnsureCurrencyDataFeeds(_algorithm.Securities, _algorithm.SubscriptionManager, _marketHoursDatabase, _symbolPropertiesDatabase, _algorithm.BrokerageModel.DefaultMarkets);
foreach (var security in addedSecurities)
{
_dataFeed.AddSubscription(universe, security, dateTimeUtc, _algorithm.EndDate.ConvertToUtc(_algorithm.TimeZone));
}
}
// return None if there's no changes, otherwise return what we've modified
return additions.Count + removals.Count != 0
? new SecurityChanges(additions, removals)
: SecurityChanges.None;
}
private Subscription CreateSubscription(Universe universe, IResultHandler resultHandler, Security security, DateTime startTimeUtc, DateTime endTimeUtc, IReadOnlyRef<TimeSpan> fillForwardResolution)
{
var config = security.SubscriptionDataConfig;
var localStartTime = startTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var localEndTime = endTimeUtc.ConvertFromUtc(security.Exchange.TimeZone);
var tradeableDates = Time.EachTradeableDay(security, localStartTime, localEndTime);
// ReSharper disable once PossibleMultipleEnumeration
if (!tradeableDates.Any())
{
_algorithm.Error(string.Format("No data loaded for {0} because there were no tradeable dates for this security.", security.Symbol));
return null;
}
// get the map file resolver for this market
var mapFileResolver = MapFileResolver.Empty;
if (config.SecurityType == SecurityType.Equity) mapFileResolver = _mapFileProvider.Get(config.Market);
// ReSharper disable once PossibleMultipleEnumeration
IEnumerator<BaseData> enumerator = new SubscriptionDataReader(config, localStartTime, localEndTime, resultHandler, mapFileResolver, _factorFileProvider, tradeableDates, false);
// optionally apply fill forward logic, but never for tick data
if (config.FillDataForward && config.Resolution != Resolution.Tick)
{
enumerator = new FillForwardEnumerator(enumerator, security.Exchange, fillForwardResolution,
security.IsExtendedMarketHours, localEndTime, config.Resolution.ToTimeSpan());
}
// finally apply exchange/user filters
enumerator = SubscriptionFilterEnumerator.WrapForDataFeed(resultHandler, enumerator, security, localEndTime);
var enqueueable = new EnqueueableEnumerator<BaseData>(true);
// add this enumerator to our exchange
ScheduleEnumerator(enumerator, enqueueable, GetLowerThreshold(config.Resolution), GetUpperThreshold(config.Resolution));
var timeZoneOffsetProvider = new TimeZoneOffsetProvider(security.Exchange.TimeZone, startTimeUtc, endTimeUtc);
var subscription = new Subscription(universe, security, enqueueable, timeZoneOffsetProvider, startTimeUtc, endTimeUtc, false);
return subscription;
}
/// <summary>
/// Initializes a new instance of the <see cref="UniverseDecorator"/> class
/// </summary>
/// <param name="universe">The decorated universe. All overridable methods delegate to this instance.</param>
protected UniverseDecorator(Universe universe)
: base(universe.Configuration)
{
Universe = universe;
}
/// <summary>
/// Initializes a new instance of the <see cref="GetSubscriptionRequestsUniverseDecorator"/> class
/// </summary>
/// <param name="universe">The universe to be decorated</param>
/// <param name="getRequests"></param>
public GetSubscriptionRequestsUniverseDecorator(Universe universe, GetSubscriptionRequestsDelegate getRequests)
: base(universe)
{
_getRequests = getRequests;
}
