/// <summary>
/// Generate the co-ords and faces necessary to construct a mesh from the shape data the accompanies a prim.
/// </summary>
/// <param name="primName"></param>
/// <param name="primShape"></param>
/// <param name="size"></param>
/// <param name="coords">Coords are added to this list by the method.</param>
/// <param name="faces">Faces are added to this list by the method.</param>
/// <returns>true if coords and faces were successfully generated, false if not</returns>
private bool GenerateCoordsAndFacesFromPrimShapeData(
string primName, PrimitiveBaseShape primShape, Vector3 size, out List<Coord> coords, out List<Face> faces)
{
PrimMesh primMesh;
coords = new List<Coord>();
faces = new List<Face>();
float pathShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f;
float pathShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f;
float pathBegin = (float)primShape.PathBegin * 2.0e-5f;
float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
if (profileHollow > 0.95f)
profileHollow = 0.95f;
int sides = 4;
if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.EquilateralTriangle)
sides = 3;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.Circle)
sides = 24;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.HalfCircle)
{ // half circle, prim is a sphere
sides = 24;
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (primShape.HollowShape == HollowShape.Circle)
hollowSides = 24;
else if (primShape.HollowShape == HollowShape.Square)
hollowSides = 4;
else if (primShape.HollowShape == HollowShape.Triangle)
hollowSides = 3;
primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
if (primMesh.errorMessage != null)
if (primMesh.errorMessage.Length > 0)
m_log.Error("[ERROR] " + primMesh.errorMessage);
primMesh.topShearX = pathShearX;
primMesh.topShearY = pathShearY;
primMesh.pathCutBegin = pathBegin;
primMesh.pathCutEnd = pathEnd;
if (primShape.PathCurve == (byte)Extrusion.Straight || primShape.PathCurve == (byte) Extrusion.Flexible)
{
primMesh.twistBegin = primShape.PathTwistBegin * 18 / 10;
primMesh.twistEnd = primShape.PathTwist * 18 / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeLinear();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return false;
}
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = primShape.PathTwistBegin * 36 / 10;
primMesh.twistEnd = primShape.PathTwist * 36 / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeCircular();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return false;
}
}
primMesh.DumpRaw(baseDir, primName, "primMesh");
primMesh.Scale(size.X, size.Y, size.Z);
coords = primMesh.coords;
faces = primMesh.faces;
return true;
}
/// <summary>
/// Generate the co-ords and faces necessary to construct a mesh from the shape data the accompanies a prim.
/// </summary>
/// <param name="primName"></param>
/// <param name="primShape"></param>
/// <param name="size"></param>
/// <param name="coords">Coords are added to this list by the method.</param>
/// <param name="faces">Faces are added to this list by the method.</param>
/// <returns>true if coords and faces were successfully generated, false if not</returns>
private bool GenerateCoordsAndFacesFromPrimShapeData(
string primName, PrimitiveBaseShape primShape, float lod, out List<Coord> coords, out List<Face> faces)
{
PrimMesh primMesh;
coords = new List<Coord>();
faces = new List<Face>();
float pathShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f;
float pathShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f;
float pathBegin = (float)primShape.PathBegin * 2.0e-5f;
float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
if (profileBegin < 0.0f)
profileBegin = 0.0f;
if (profileEnd < 0.02f)
profileEnd = 0.02f;
else if (profileEnd > 1.0f)
profileEnd = 1.0f;
if (profileBegin >= profileEnd)
profileBegin = profileEnd - 0.02f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
if (profileHollow > 0.95f)
profileHollow = 0.95f;
int sides = 4;
LevelOfDetail iLOD = (LevelOfDetail)lod;
byte profshape = (byte)(primShape.ProfileCurve & 0x07);
if (profshape == (byte)ProfileShape.EquilateralTriangle
|| profshape == (byte)ProfileShape.IsometricTriangle
|| profshape == (byte)ProfileShape.RightTriangle)
sides = 3;
else if (profshape == (byte)ProfileShape.Circle)
{
switch (iLOD)
{
case LevelOfDetail.High: sides = 24; break;
case LevelOfDetail.Medium: sides = 12; break;
case LevelOfDetail.Low: sides = 6; break;
case LevelOfDetail.VeryLow: sides = 3; break;
default: sides = 24; break;
}
}
else if (profshape == (byte)ProfileShape.HalfCircle)
{ // half circle, prim is a sphere
switch (iLOD)
{
case LevelOfDetail.High: sides = 24; break;
case LevelOfDetail.Medium: sides = 12; break;
case LevelOfDetail.Low: sides = 6; break;
case LevelOfDetail.VeryLow: sides = 3; break;
default: sides = 24; break;
}
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (primShape.HollowShape == HollowShape.Circle)
{
switch (iLOD)
{
case LevelOfDetail.High: hollowSides = 24; break;
case LevelOfDetail.Medium: hollowSides = 12; break;
case LevelOfDetail.Low: hollowSides = 6; break;
case LevelOfDetail.VeryLow: hollowSides = 3; break;
default: hollowSides = 24; break;
}
}
else if (primShape.HollowShape == HollowShape.Square)
hollowSides = 4;
else if (primShape.HollowShape == HollowShape.Triangle)
{
if (profshape == (byte)ProfileShape.HalfCircle)
hollowSides = 6;
else
hollowSides = 3;
}
primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
if (primMesh.errorMessage != null)
if (primMesh.errorMessage.Length > 0)
m_log.Error("[ERROR] " + primMesh.errorMessage);
primMesh.topShearX = pathShearX;
primMesh.topShearY = pathShearY;
primMesh.pathCutBegin = pathBegin;
primMesh.pathCutEnd = pathEnd;
if (primShape.PathCurve == (byte)Extrusion.Straight || primShape.PathCurve == (byte) Extrusion.Flexible)
{
primMesh.twistBegin = (primShape.PathTwistBegin * 18) / 10;
primMesh.twistEnd = (primShape.PathTwist * 18) / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeLinear();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return false;
}
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = (primShape.PathTwistBegin * 36) / 10;
primMesh.twistEnd = (primShape.PathTwist * 36) / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
if(profshape == (byte)ProfileShape.HalfCircle)
{
if(primMesh.holeSizeY < 0.01f)
primMesh.holeSizeY = 0.01f;
else if(primMesh.holeSizeY > 1.0f)
primMesh.holeSizeY = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeCircular();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return false;
}
}
// primMesh.DumpRaw(baseDir, primName, "primMesh");
coords = primMesh.coords;
faces = primMesh.faces;
return true;
}
private Mesh CreateMeshFromPrimMesher(string primName, PrimitiveBaseShape primShape, Vector3 size, float lod)
{
// m_log.DebugFormat(
// "[MESH]: Creating physics proxy for {0}, shape {1}",
// primName, (OpenMetaverse.SculptType)primShape.SculptType);
PrimMesh primMesh;
PrimMesher.SculptMesh sculptMesh;
List<Coord> coords = new List<Coord>();
List<Face> faces = new List<Face>();
Image idata = null;
string decodedSculptFileName = "";
if (primShape.SculptEntry)
{
if (((OpenMetaverse.SculptType)primShape.SculptType) == SculptType.Mesh)
{
if (!useMeshiesPhysicsMesh)
return null;
m_log.DebugFormat("[MESH]: experimental mesh proxy generation for {0}", primName);
OSD meshOsd = null;
if (primShape.SculptData.Length <= 0)
{
m_log.Error("[MESH]: asset data is zero length");
return null;
}
long start = 0;
using (MemoryStream data = new MemoryStream(primShape.SculptData))
{
try
{
OSD osd = OSDParser.DeserializeLLSDBinary(data);
if (osd is OSDMap)
meshOsd = (OSDMap)osd;
else
{
m_log.Warn("[Mesh}: unable to cast mesh asset to OSDMap");
return null;
}
}
catch (Exception e)
{
m_log.Error("[MESH]: Exception deserializing mesh asset header:" + e.ToString());
}
start = data.Position;
}
if (meshOsd is OSDMap)
{
OSDMap physicsParms = null;
OSDMap map = (OSDMap)meshOsd;
if (map.ContainsKey("physics_shape"))
physicsParms = (OSDMap)map["physics_shape"]; // old asset format
else if (map.ContainsKey("physics_mesh"))
physicsParms = (OSDMap)map["physics_mesh"]; // new asset format
if (physicsParms == null)
{
m_log.Warn("[MESH]: no recognized physics mesh found in mesh asset");
return null;
}
int physOffset = physicsParms["offset"].AsInteger() + (int)start;
int physSize = physicsParms["size"].AsInteger();
if (physOffset < 0 || physSize == 0)
return null; // no mesh data in asset
OSD decodedMeshOsd = new OSD();
byte[] meshBytes = new byte[physSize];
System.Buffer.BlockCopy(primShape.SculptData, physOffset, meshBytes, 0, physSize);
// byte[] decompressed = new byte[physSize * 5];
try
{
using (MemoryStream inMs = new MemoryStream(meshBytes))
{
using (MemoryStream outMs = new MemoryStream())
{
using (ZOutputStream zOut = new ZOutputStream(outMs))
{
byte[] readBuffer = new byte[2048];
int readLen = 0;
while ((readLen = inMs.Read(readBuffer, 0, readBuffer.Length)) > 0)
{
zOut.Write(readBuffer, 0, readLen);
}
zOut.Flush();
outMs.Seek(0, SeekOrigin.Begin);
byte[] decompressedBuf = outMs.GetBuffer();
decodedMeshOsd = OSDParser.DeserializeLLSDBinary(decompressedBuf);
}
}
}
}
catch (Exception e)
{
m_log.Error("[MESH]: exception decoding physical mesh: " + e.ToString());
return null;
}
OSDArray decodedMeshOsdArray = null;
// physics_shape is an array of OSDMaps, one for each submesh
if (decodedMeshOsd is OSDArray)
{
// Console.WriteLine("decodedMeshOsd for {0} - {1}", primName, Util.GetFormattedXml(decodedMeshOsd));
decodedMeshOsdArray = (OSDArray)decodedMeshOsd;
foreach (OSD subMeshOsd in decodedMeshOsdArray)
{
if (subMeshOsd is OSDMap)
AddSubMesh(subMeshOsd as OSDMap, size, coords, faces);
}
}
}
}
else
{
if (cacheSculptMaps && primShape.SculptTexture != UUID.Zero)
{
decodedSculptFileName = System.IO.Path.Combine(decodedSculptMapPath, "smap_" + primShape.SculptTexture.ToString());
try
{
if (File.Exists(decodedSculptFileName))
{
idata = Image.FromFile(decodedSculptFileName);
}
}
catch (Exception e)
{
m_log.Error("[SCULPT]: unable to load cached sculpt map " + decodedSculptFileName + " " + e.Message);
}
//if (idata != null)
// m_log.Debug("[SCULPT]: loaded cached map asset for map ID: " + primShape.SculptTexture.ToString());
}
if (idata == null)
{
if (primShape.SculptData == null || primShape.SculptData.Length == 0)
return null;
try
{
OpenMetaverse.Imaging.ManagedImage unusedData;
OpenMetaverse.Imaging.OpenJPEG.DecodeToImage(primShape.SculptData, out unusedData, out idata);
unusedData = null;
//idata = CSJ2K.J2kImage.FromBytes(primShape.SculptData);
if (cacheSculptMaps && idata != null)
{
try { idata.Save(decodedSculptFileName, ImageFormat.MemoryBmp); }
catch (Exception e) { m_log.Error("[SCULPT]: unable to cache sculpt map " + decodedSculptFileName + " " + e.Message); }
}
}
catch (DllNotFoundException)
{
m_log.Error("[PHYSICS]: OpenJpeg is not installed correctly on this system. Physics Proxy generation failed. Often times this is because of an old version of GLIBC. You must have version 2.4 or above!");
return null;
}
catch (IndexOutOfRangeException)
{
m_log.Error("[PHYSICS]: OpenJpeg was unable to decode this. Physics Proxy generation failed");
return null;
}
catch (Exception ex)
{
m_log.Error("[PHYSICS]: Unable to generate a Sculpty physics proxy. Sculpty texture decode failed: " + ex.Message);
return null;
}
}
PrimMesher.SculptMesh.SculptType sculptType;
switch ((OpenMetaverse.SculptType)primShape.SculptType)
{
case OpenMetaverse.SculptType.Cylinder:
sculptType = PrimMesher.SculptMesh.SculptType.cylinder;
break;
case OpenMetaverse.SculptType.Plane:
sculptType = PrimMesher.SculptMesh.SculptType.plane;
break;
case OpenMetaverse.SculptType.Torus:
sculptType = PrimMesher.SculptMesh.SculptType.torus;
break;
case OpenMetaverse.SculptType.Sphere:
sculptType = PrimMesher.SculptMesh.SculptType.sphere;
break;
default:
sculptType = PrimMesher.SculptMesh.SculptType.plane;
break;
}
bool mirror = ((primShape.SculptType & 128) != 0);
bool invert = ((primShape.SculptType & 64) != 0);
sculptMesh = new PrimMesher.SculptMesh((Bitmap)idata, sculptType, (int)lod, false, mirror, invert);
idata.Dispose();
sculptMesh.DumpRaw(baseDir, primName, "primMesh");
sculptMesh.Scale(size.X, size.Y, size.Z);
coords = sculptMesh.coords;
faces = sculptMesh.faces;
}
}
else
{
float pathShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f;
float pathShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f;
float pathBegin = (float)primShape.PathBegin * 2.0e-5f;
float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
if (profileHollow > 0.95f)
profileHollow = 0.95f;
int sides = 4;
if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.EquilateralTriangle)
sides = 3;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.Circle)
sides = 24;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.HalfCircle)
{ // half circle, prim is a sphere
sides = 24;
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (primShape.HollowShape == HollowShape.Circle)
hollowSides = 24;
else if (primShape.HollowShape == HollowShape.Square)
hollowSides = 4;
else if (primShape.HollowShape == HollowShape.Triangle)
hollowSides = 3;
primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
if (primMesh.errorMessage != null)
if (primMesh.errorMessage.Length > 0)
m_log.Error("[ERROR] " + primMesh.errorMessage);
primMesh.topShearX = pathShearX;
primMesh.topShearY = pathShearY;
primMesh.pathCutBegin = pathBegin;
primMesh.pathCutEnd = pathEnd;
if (primShape.PathCurve == (byte)Extrusion.Straight || primShape.PathCurve == (byte) Extrusion.Flexible)
{
primMesh.twistBegin = primShape.PathTwistBegin * 18 / 10;
primMesh.twistEnd = primShape.PathTwist * 18 / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeLinear();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return null;
}
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = primShape.PathTwistBegin * 36 / 10;
primMesh.twistEnd = primShape.PathTwist * 36 / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeCircular();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return null;
}
}
primMesh.DumpRaw(baseDir, primName, "primMesh");
primMesh.Scale(size.X, size.Y, size.Z);
coords = primMesh.coords;
faces = primMesh.faces;
}
// Remove the reference to any JPEG2000 sculpt data so it can be GCed
primShape.SculptData = Utils.EmptyBytes;
int numCoords = coords.Count;
int numFaces = faces.Count;
// Create the list of vertices
List<Vertex> vertices = new List<Vertex>();
for (int i = 0; i < numCoords; i++)
{
Coord c = coords[i];
vertices.Add(new Vertex(c.X, c.Y, c.Z));
}
Mesh mesh = new Mesh();
// Add the corresponding triangles to the mesh
for (int i = 0; i < numFaces; i++)
{
Face f = faces[i];
mesh.Add(new Triangle(vertices[f.v1], vertices[f.v2], vertices[f.v3]));
}
return mesh;
}
private bool GeneratePrimTrimesh(string primName, PrimitiveBaseShape primShape, ref OpenMetaverse.Vector3 size, float lod, bool preScale,
out List<Coord> coords, out List<Face> faces)
{
PrimMesh primMesh;
float pathShearX = Primitive.UnpackPathShear((sbyte)primShape.PathShearX);
float pathShearY = Primitive.UnpackPathShear((sbyte)primShape.PathShearY);
float pathBegin = (float)primShape.PathBegin * 2.0e-5f;
float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
if (profileHollow > 0.95f)
profileHollow = 0.95f;
int sides = 4;
LevelOfDetail iLOD = (LevelOfDetail)lod;
if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.EquilateralTriangle)
sides = 3;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.Circle)
{
switch (iLOD)
{
case LevelOfDetail.High: sides = 24; break;
case LevelOfDetail.Medium: sides = 12; break;
case LevelOfDetail.Low: sides = 6; break;
case LevelOfDetail.VeryLow: sides = 3; break;
default: sides = 24; break;
}
}
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.HalfCircle)
{ // half circle, prim is a sphere
switch (iLOD)
{
case LevelOfDetail.High: sides = 24; break;
case LevelOfDetail.Medium: sides = 12; break;
case LevelOfDetail.Low: sides = 6; break;
case LevelOfDetail.VeryLow: sides = 3; break;
default: sides = 24; break;
}
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (primShape.HollowShape == HollowShape.Circle)
{
switch (iLOD)
{
case LevelOfDetail.High: hollowSides = 24; break;
case LevelOfDetail.Medium: hollowSides = 12; break;
case LevelOfDetail.Low: hollowSides = 6; break;
case LevelOfDetail.VeryLow: hollowSides = 3; break;
default: hollowSides = 24; break;
}
}
else if (primShape.HollowShape == HollowShape.Square)
hollowSides = 4;
else if (primShape.HollowShape == HollowShape.Triangle)
hollowSides = 3;
primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
if (primMesh.errorMessage != null)
if (primMesh.errorMessage.Length > 0)
m_log.Error("[ERROR] " + primMesh.errorMessage);
primMesh.topShearX = pathShearX;
primMesh.topShearY = pathShearY;
primMesh.pathCutBegin = pathBegin;
primMesh.pathCutEnd = pathEnd;
if (primShape.PathCurve == (byte)Extrusion.Straight || primShape.PathCurve == (byte)Extrusion.Flexible)
{
primMesh.twistBegin = primShape.PathTwistBegin * 18 / 10;
primMesh.twistEnd = primShape.PathTwist * 18 / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
//m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString());
try
{
primMesh.ExtrudeLinear();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
coords = null;
faces = null;
return false;
}
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = primShape.PathTwistBegin * 36 / 10;
primMesh.twistEnd = primShape.PathTwist * 36 / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
//m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString());
try
{
primMesh.ExtrudeCircular();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
coords = null;
faces = null;
return false;
}
}
primMesh.DumpRaw(baseDir, primName, "primMesh");
if (preScale) primMesh.Scale(size.X, size.Y, size.Z);
coords = primMesh.coords;
faces = primMesh.faces;
return true;
}
public Mesh CreateMeshFromPrimMesher(string primName, PrimitiveBaseShape primShape, PhysicsVector size, float lod)
{
Mesh mesh = new Mesh();
PrimMesh primMesh;
PrimMesher.SculptMesh sculptMesh;
List<Coord> coords;
List<Face> faces;
Image idata = null;
string decodedSculptFileName = "";
if (primShape.SculptEntry)
{
if (cacheSculptMaps && primShape.SculptTexture != UUID.Zero)
{
decodedSculptFileName = System.IO.Path.Combine(decodedScultMapPath, "smap_" + primShape.SculptTexture.ToString());
try
{
if (File.Exists(decodedSculptFileName))
{
idata = Image.FromFile(decodedSculptFileName);
}
}
catch (Exception e)
{
m_log.Error("[SCULPT]: unable to load cached sculpt map " + decodedSculptFileName + " " + e.Message);
}
//if (idata != null)
// m_log.Debug("[SCULPT]: loaded cached map asset for map ID: " + primShape.SculptTexture.ToString());
}
if (idata == null)
{
if (primShape.SculptData.Length == 0)
return null;
try
{
ManagedImage managedImage; // we never use this
OpenJPEG.DecodeToImage(primShape.SculptData, out managedImage, out idata);
if (cacheSculptMaps)
{
try { idata.Save(decodedSculptFileName, ImageFormat.MemoryBmp); }
catch (Exception e) { m_log.Error("[SCULPT]: unable to cache sculpt map " + decodedSculptFileName + " " + e.Message); }
}
}
catch (DllNotFoundException)
{
m_log.Error("[PHYSICS]: OpenJpeg is not installed correctly on this system. Physics Proxy generation failed. Often times this is because of an old version of GLIBC. You must have version 2.4 or above!");
return null;
}
catch (IndexOutOfRangeException)
{
m_log.Error("[PHYSICS]: OpenJpeg was unable to decode this. Physics Proxy generation failed");
return null;
}
catch (Exception)
{
m_log.Error("[PHYSICS]: Unable to generate a Sculpty physics proxy. Sculpty texture decode failed!");
return null;
}
}
PrimMesher.SculptMesh.SculptType sculptType;
switch ((OpenMetaverse.SculptType)primShape.SculptType)
{
case OpenMetaverse.SculptType.Cylinder:
sculptType = PrimMesher.SculptMesh.SculptType.cylinder;
break;
case OpenMetaverse.SculptType.Plane:
sculptType = PrimMesher.SculptMesh.SculptType.plane;
break;
case OpenMetaverse.SculptType.Torus:
sculptType = PrimMesher.SculptMesh.SculptType.torus;
break;
case OpenMetaverse.SculptType.Sphere:
sculptType = PrimMesher.SculptMesh.SculptType.sphere;
break;
default:
sculptType = PrimMesher.SculptMesh.SculptType.plane;
break;
}
bool mirror = ((primShape.SculptType & 128) != 0);
bool invert = ((primShape.SculptType & 64) != 0);
sculptMesh = new PrimMesher.SculptMesh((Bitmap)idata, sculptType, (int)lod, false, mirror, invert);
idata.Dispose();
sculptMesh.DumpRaw(baseDir, primName, "primMesh");
sculptMesh.Scale(size.X, size.Y, size.Z);
coords = sculptMesh.coords;
faces = sculptMesh.faces;
}
else
{
float pathShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f;
float pathShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f;
float pathBegin = (float)primShape.PathBegin * 2.0e-5f;
float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
if (profileHollow > 0.95f)
profileHollow = 0.95f;
int sides = 4;
if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.EquilateralTriangle)
sides = 3;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.Circle)
sides = 24;
else if ((primShape.ProfileCurve & 0x07) == (byte)ProfileShape.HalfCircle)
{ // half circle, prim is a sphere
sides = 24;
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (primShape.HollowShape == HollowShape.Circle)
hollowSides = 24;
else if (primShape.HollowShape == HollowShape.Square)
hollowSides = 4;
else if (primShape.HollowShape == HollowShape.Triangle)
hollowSides = 3;
primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
if (primMesh.errorMessage != null)
if (primMesh.errorMessage.Length > 0)
m_log.Error("[ERROR] " + primMesh.errorMessage);
primMesh.topShearX = pathShearX;
primMesh.topShearY = pathShearY;
primMesh.pathCutBegin = pathBegin;
primMesh.pathCutEnd = pathEnd;
if (primShape.PathCurve == (byte)Extrusion.Straight)
{
primMesh.twistBegin = primShape.PathTwistBegin * 18 / 10;
primMesh.twistEnd = primShape.PathTwist * 18 / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeLinear();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return null;
}
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = primShape.PathTwistBegin * 36 / 10;
primMesh.twistEnd = primShape.PathTwist * 36 / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
if (profileBegin < 0.0f || profileBegin >= profileEnd || profileEnd > 1.0f)
{
ReportPrimError("*** CORRUPT PRIM!! ***", primName, primMesh);
if (profileBegin < 0.0f) profileBegin = 0.0f;
if (profileEnd > 1.0f) profileEnd = 1.0f;
}
#if SPAM
m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString());
#endif
try
{
primMesh.ExtrudeCircular();
}
catch (Exception ex)
{
ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh);
return null;
}
}
primMesh.DumpRaw(baseDir, primName, "primMesh");
primMesh.Scale(size.X, size.Y, size.Z);
coords = primMesh.coords;
faces = primMesh.faces;
mesh.primMesh = primMesh;
}
int numCoords = coords.Count;
int numFaces = faces.Count;
for (int i = 0; i < numCoords; i++)
{
Coord c = coords[i];
mesh.vertices.Add(new Vertex(c.X, c.Y, c.Z));
}
List<Vertex> vertices = mesh.vertices;
for (int i = 0; i < numFaces; i++)
{
Face f = faces[i];
mesh.triangles.Add(new Triangle(vertices[f.v1], vertices[f.v2], vertices[f.v3]));
}
return mesh;
}
public static Mesh PrimitiveToIrrMesh(Primitive prim, LevelOfDetail detail)
{
Primitive.ConstructionData primData = prim.PrimData;
int sides = 4;
int hollowsides = 4;
float profileBegin = primData.ProfileBegin;
float profileEnd = primData.ProfileEnd;
bool isSphere = false;
if ((ProfileCurve)(primData.profileCurve & 0x07) == ProfileCurve.Circle)
{
switch (detail)
{
case LevelOfDetail.Low:
sides = 6;
break;
case LevelOfDetail.Medium:
sides = 12;
break;
default:
sides = 24;
break;
}
}
else if ((ProfileCurve)(primData.profileCurve & 0x07) == ProfileCurve.EqualTriangle)
{
sides = 3;
}
// half circle, prim is a sphere
else if ((ProfileCurve)(primData.profileCurve & 0x07) == ProfileCurve.HalfCircle)
{
isSphere = true;
switch (detail)
{
case LevelOfDetail.Low:
sides = 6;
break;
case LevelOfDetail.Medium:
sides = 12;
break;
default:
sides = 24;
break;
}
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
if ((HoleType)primData.ProfileHole == HoleType.Same)
{
hollowsides = sides;
}
else if ((HoleType)primData.ProfileHole == HoleType.Circle)
{
switch (detail)
{
case LevelOfDetail.Low:
hollowsides = 6;
break;
case LevelOfDetail.Medium:
hollowsides = 12;
break;
default:
hollowsides = 24;
break;
}
}
else if ((HoleType)primData.ProfileHole == HoleType.Triangle)
hollowsides = 3;
PrimMesh newPrim = new PrimMesh(sides, profileBegin, profileEnd, (float)primData.ProfileHollow, hollowsides);
newPrim.viewerMode = true;
newPrim.holeSizeX = primData.PathScaleX;
newPrim.holeSizeY = primData.PathScaleY;
newPrim.pathCutBegin = primData.PathBegin;
newPrim.pathCutEnd = primData.PathEnd;
newPrim.topShearX = primData.PathShearX;
newPrim.topShearY = primData.PathShearY;
newPrim.radius = primData.PathRadiusOffset;
newPrim.revolutions = primData.PathRevolutions;
newPrim.skew = primData.PathSkew;
switch (detail)
{
case LevelOfDetail.Low:
newPrim.stepsPerRevolution = 6;
break;
case LevelOfDetail.Medium:
newPrim.stepsPerRevolution = 12;
break;
default:
newPrim.stepsPerRevolution = 24;
break;
}
if (primData.PathCurve == PathCurve.Line)
{
newPrim.taperX = 1.0f - primData.PathScaleX;
newPrim.taperY = 1.0f - primData.PathScaleY;
newPrim.twistBegin = (int)(180 * primData.PathTwistBegin);
newPrim.twistEnd = (int)(180 * primData.PathTwist);
newPrim.ExtrudeLinear();
}
else if (primData.PathCurve == PathCurve.Flexible)
{
newPrim.taperX = 1.0f - primData.PathScaleX;
newPrim.taperY = 1.0f - primData.PathScaleY;
newPrim.twistBegin = (int)(180 * primData.PathTwistBegin);
newPrim.twistEnd = (int)(180 * primData.PathTwist);
newPrim.ExtrudeLinear();
}
else
{
newPrim.taperX = primData.PathTaperX;
newPrim.taperY = primData.PathTaperY;
newPrim.twistBegin = (int)(360 * primData.PathTwistBegin);
newPrim.twistEnd = (int)(360 * primData.PathTwist);
newPrim.ExtrudeCircular();
}
int numViewerFaces = newPrim.viewerFaces.Count;
for (uint i = 0; i < numViewerFaces; i++)
{
ViewerFace vf = newPrim.viewerFaces[(int)i];
if (isSphere)
{
vf.uv1.U = (vf.uv1.U - 0.5f) * 2.0f;
vf.uv2.U = (vf.uv2.U - 0.5f) * 2.0f;
vf.uv3.U = (vf.uv3.U - 0.5f) * 2.0f;
}
}
return FacesToIrrMesh(newPrim.viewerFaces, newPrim.numPrimFaces);
}
private MeshData[] GetMeshsDataFromPrim(Primitive prim, DetailLevel lod)
{
PrimitiveBaseShape primShape = new PrimitiveBaseShape(prim);
float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f;
float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f;
float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f;
int sides = 4;
if ((prim.PrimData.profileCurve & 0x07) == (byte)ProfileCurve.EqualTriangle)
sides = 3;
else if ((prim.PrimData.profileCurve & 0x07) == (byte)ProfileCurve.Circle)
sides = 24;
else if ((prim.PrimData.profileCurve & 0x07) == (byte)ProfileCurve.HalfCircle)
{
// half circle, prim is a sphere
sides = 24;
profileBegin = 0.5f * profileBegin + 0.5f;
profileEnd = 0.5f * profileEnd + 0.5f;
}
int hollowSides = sides;
if (prim.PrimData.ProfileHole == HoleType.Circle)
hollowSides = 24;
else if (prim.PrimData.ProfileHole == HoleType.Square)
hollowSides = 4;
else if (prim.PrimData.ProfileHole == HoleType.Triangle)
hollowSides = 3;
PrimMesh primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides);
primMesh.viewerMode = true;
primMesh.calcVertexNormals = true;
primMesh.topShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f;
primMesh.topShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f;
primMesh.pathCutBegin = (float)primShape.PathBegin * 2.0e-5f;
primMesh.pathCutEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f;
switch (lod)
{
case DetailLevel.Highest:
case DetailLevel.High:
primMesh.stepsPerRevolution = 24;
break;
case DetailLevel.Medium:
primMesh.stepsPerRevolution = 12;
break;
case DetailLevel.Low:
primMesh.stepsPerRevolution = 6;
break;
}
float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f;
float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f;
if (prim.PrimData.PathCurve == OpenMetaverse.PathCurve.Line)
{
primMesh.twistBegin = primShape.PathTwistBegin * 18 / 10;
primMesh.twistEnd = primShape.PathTwist * 18 / 10;
primMesh.taperX = pathScaleX;
primMesh.taperY = pathScaleY;
try
{
primMesh.ExtrudeLinear();
}
catch { return null; }
}
else
{
primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f;
primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f;
primMesh.radius = 0.01f * primShape.PathRadiusOffset;
primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions;
primMesh.skew = 0.01f * primShape.PathSkew;
primMesh.twistBegin = primShape.PathTwistBegin * 36 / 10;
primMesh.twistEnd = primShape.PathTwist * 36 / 10;
primMesh.taperX = primShape.PathTaperX * 0.01f;
primMesh.taperY = primShape.PathTaperY * 0.01f;
try
{
primMesh.ExtrudeCircular();
}
catch { return null; }
}
return GetMeshsDataFromPrimFaces(prim, primMesh.viewerFaces.ToArray());
}
