Пример #1
0
        public void StoreImpulses()
        {
            for (int i = 0; i < _count; ++i)
            {
                ContactVelocityConstraint vc = _velocityConstraints[i];
                Manifold manifold            = _contacts[vc.contactIndex].Manifold;

                for (int j = 0; j < vc.pointCount; ++j)
                {
                    ManifoldPoint point = manifold.Points[j];
                    point.NormalImpulse  = vc.points[j].normalImpulse;
                    point.TangentImpulse = vc.points[j].tangentImpulse;
                    manifold.Points[j]   = point;
                }

                _contacts[vc.contactIndex].Manifold = manifold;
            }
        }
Пример #2
0
        public void WarmStart()
        {
            // Warm start.
            for (int i = 0; i < _count; ++i)
            {
                ContactVelocityConstraint vc = _velocityConstraints[i];

                int   indexA     = vc.indexA;
                int   indexB     = vc.indexB;
                float mA         = vc.invMassA;
                float iA         = vc.invIA;
                float mB         = vc.invMassB;
                float iB         = vc.invIB;
                int   pointCount = vc.pointCount;

                Vector2 vA = _velocities[indexA].v;
                float   wA = _velocities[indexA].w;
                Vector2 vB = _velocities[indexB].v;
                float   wB = _velocities[indexB].w;

                Vector2 normal  = vc.normal;
                Vector2 tangent = MathUtils.Rot270(ref normal);

                for (int j = 0; j < pointCount; ++j)
                {
                    VelocityConstraintPoint vcp = vc.points[j];
                    Vector2 P = vcp.normalImpulse * normal + vcp.tangentImpulse * tangent;
                    wA -= iA * MathUtils.Cross(ref vcp.rA, ref P);
                    vA -= mA * P;
                    wB += iB * MathUtils.Cross(ref vcp.rB, ref P);
                    vB += mB * P;
                }

                _velocities[indexA].v = vA;
                _velocities[indexA].w = wA;
                _velocities[indexB].v = vB;
                _velocities[indexB].w = wB;
            }
        }
Пример #3
0
        private void SolveVelocityConstraints(int start, int end)
        {
            for (int i = start; i < end; ++i)
            {
                ContactVelocityConstraint vc = _velocityConstraints[i];

#if NET40 || NET45 || PORTABLE40 || PORTABLE45 || W10 || W8_1 || WP8_1
                // find lower order item
                int orderedIndexA = vc.indexA;
                int orderedIndexB = vc.indexB;
                if (orderedIndexB < orderedIndexA)
                {
                    orderedIndexA = vc.indexB;
                    orderedIndexB = vc.indexA;
                }

                for (; ;)
                {
                    if (Interlocked.CompareExchange(ref _velocities[orderedIndexA].Lock, 1, 0) == 0)
                    {
                        if (Interlocked.CompareExchange(ref _velocities[orderedIndexB].Lock, 1, 0) == 0)
                        {
                            break;
                        }
                        _velocities[orderedIndexA].Lock = 0;
                    }
#if NET40 || NET45
                    Thread.Sleep(0);
#endif
                }
#endif

                int   indexA     = vc.indexA;
                int   indexB     = vc.indexB;
                float mA         = vc.invMassA;
                float iA         = vc.invIA;
                float mB         = vc.invMassB;
                float iB         = vc.invIB;
                int   pointCount = vc.pointCount;

                Vector2 vA = _velocities[indexA].v;
                float   wA = _velocities[indexA].w;
                Vector2 vB = _velocities[indexB].v;
                float   wB = _velocities[indexB].w;

                Vector2 normal   = vc.normal;
                Vector2 tangent  = MathUtils.Rot270(ref normal);
                float   friction = vc.friction;

                Debug.Assert(pointCount == 1 || pointCount == 2);

                // Solve tangent constraints first because non-penetration is more important
                // than friction.
                for (int j = 0; j < pointCount; ++j)
                {
                    VelocityConstraintPoint vcp = vc.points[j];

                    // Relative velocity at contact
                    Vector2 dv = vB + MathUtils.Cross(wB, ref vcp.rB) - vA - MathUtils.Cross(wA, ref vcp.rA);

                    // Compute tangent force
                    float vt     = Vector2.Dot(dv, tangent) - vc.tangentSpeed;
                    float lambda = vcp.tangentMass * (-vt);

                    // b2Clamp the accumulated force
                    float maxFriction = friction * vcp.normalImpulse;
                    float newImpulse  = MathUtils.Clamp(vcp.tangentImpulse + lambda, -maxFriction, maxFriction);
                    lambda             = newImpulse - vcp.tangentImpulse;
                    vcp.tangentImpulse = newImpulse;

                    // Apply contact impulse
                    Vector2 P = lambda * tangent;

                    vA -= mA * P;
                    wA -= iA * MathUtils.Cross(ref vcp.rA, ref P);

                    vB += mB * P;
                    wB += iB * MathUtils.Cross(ref vcp.rB, ref P);
                }

                // Solve normal constraints
                if (vc.pointCount == 1)
                {
                    VelocityConstraintPoint vcp = vc.points[0];

                    // Relative velocity at contact
                    Vector2 dv = vB + MathUtils.Cross(wB, ref vcp.rB) - vA - MathUtils.Cross(wA, ref vcp.rA);

                    // Compute normal impulse
                    float vn     = Vector2.Dot(dv, normal);
                    float lambda = -vcp.normalMass * (vn - vcp.velocityBias);

                    // b2Clamp the accumulated impulse
                    float newImpulse = Math.Max(vcp.normalImpulse + lambda, 0.0f);
                    lambda            = newImpulse - vcp.normalImpulse;
                    vcp.normalImpulse = newImpulse;

                    // Apply contact impulse
                    Vector2 P = lambda * normal;
                    vA -= mA * P;
                    wA -= iA * MathUtils.Cross(ref vcp.rA, ref P);

                    vB += mB * P;
                    wB += iB * MathUtils.Cross(ref vcp.rB, ref P);
                }
                else
                {
                    // Block solver developed in collaboration with Dirk Gregorius (back in 01/07 on Box2D_Lite).
                    // Build the mini LCP for this contact patch
                    //
                    // vn = A * x + b, vn >= 0, , vn >= 0, x >= 0 and vn_i * x_i = 0 with i = 1..2
                    //
                    // A = J * W * JT and J = ( -n, -r1 x n, n, r2 x n )
                    // b = vn0 - velocityBias
                    //
                    // The system is solved using the "Total enumeration method" (s. Murty). The complementary constraint vn_i * x_i
                    // implies that we must have in any solution either vn_i = 0 or x_i = 0. So for the 2D contact problem the cases
                    // vn1 = 0 and vn2 = 0, x1 = 0 and x2 = 0, x1 = 0 and vn2 = 0, x2 = 0 and vn1 = 0 need to be tested. The first valid
                    // solution that satisfies the problem is chosen.
                    //
                    // In order to account of the accumulated impulse 'a' (because of the iterative nature of the solver which only requires
                    // that the accumulated impulse is clamped and not the incremental impulse) we change the impulse variable (x_i).
                    //
                    // Substitute:
                    //
                    // x = a + d
                    //
                    // a := old total impulse
                    // x := new total impulse
                    // d := incremental impulse
                    //
                    // For the current iteration we extend the formula for the incremental impulse
                    // to compute the new total impulse:
                    //
                    // vn = A * d + b
                    //    = A * (x - a) + b
                    //    = A * x + b - A * a
                    //    = A * x + b'
                    // b' = b - A * a;

                    VelocityConstraintPoint cp1 = vc.points[0];
                    VelocityConstraintPoint cp2 = vc.points[1];

                    Vector2 a = new Vector2(cp1.normalImpulse, cp2.normalImpulse);
                    Debug.Assert(a.X >= 0.0f && a.Y >= 0.0f);

                    // Relative velocity at contact
                    Vector2 dv1 = vB + MathUtils.Cross(wB, ref cp1.rB) - vA - MathUtils.Cross(wA, ref cp1.rA);
                    Vector2 dv2 = vB + MathUtils.Cross(wB, ref cp2.rB) - vA - MathUtils.Cross(wA, ref cp2.rA);

                    // Compute normal velocity
                    float vn1 = Vector2.Dot(dv1, normal);
                    float vn2 = Vector2.Dot(dv2, normal);

                    Vector2 b = new Vector2();
                    b.X = vn1 - cp1.velocityBias;
                    b.Y = vn2 - cp2.velocityBias;

                    // Compute b'
                    b -= MathUtils.Mul(ref vc.K, ref a);

                    const float k_errorTol = 1e-3f;
                    //B2_NOT_USED(k_errorTol);

                    for (; ;)
                    {
                        //
                        // Case 1: vn = 0
                        //
                        // 0 = A * x + b'
                        //
                        // Solve for x:
                        //
                        // x = - inv(A) * b'
                        //
                        Vector2 x = -MathUtils.Mul(ref vc.normalMass, ref b);

                        if (x.X >= 0.0f && x.Y >= 0.0f)
                        {
                            // Get the incremental impulse
                            Vector2 d = x - a;

                            // Apply incremental impulse
                            Vector2 P1 = d.X * normal;
                            Vector2 P2 = d.Y * normal;
                            vA -= mA * (P1 + P2);
                            wA -= iA * (MathUtils.Cross(ref cp1.rA, ref P1) + MathUtils.Cross(ref cp2.rA, ref P2));

                            vB += mB * (P1 + P2);
                            wB += iB * (MathUtils.Cross(ref cp1.rB, ref P1) + MathUtils.Cross(ref cp2.rB, ref P2));

                            // Accumulate
                            cp1.normalImpulse = x.X;
                            cp2.normalImpulse = x.Y;

#if B2_DEBUG_SOLVER
                            // Postconditions
                            dv1 = vB + MathUtils.Cross(wB, cp1.rB) - vA - MathUtils.Cross(wA, cp1.rA);
                            dv2 = vB + MathUtils.Cross(wB, cp2.rB) - vA - MathUtils.Cross(wA, cp2.rA);

                            // Compute normal velocity
                            vn1 = Vector2.Dot(dv1, normal);
                            vn2 = Vector2.Dot(dv2, normal);

                            b2Assert(b2Abs(vn1 - cp1.velocityBias) < k_errorTol);
                            b2Assert(b2Abs(vn2 - cp2.velocityBias) < k_errorTol);
#endif
                            break;
                        }

                        //
                        // Case 2: vn1 = 0 and x2 = 0
                        //
                        //   0 = a11 * x1 + a12 * 0 + b1'
                        // vn2 = a21 * x1 + a22 * 0 + b2'
                        //
                        x.X = -cp1.normalMass * b.X;
                        x.Y = 0.0f;
                        vn1 = 0.0f;
                        vn2 = vc.K.ex.Y * x.X + b.Y;

                        if (x.X >= 0.0f && vn2 >= 0.0f)
                        {
                            // Get the incremental impulse
                            Vector2 d = x - a;

                            // Apply incremental impulse
                            Vector2 P1 = d.X * normal;
                            Vector2 P2 = d.Y * normal;
                            vA -= mA * (P1 + P2);
                            wA -= iA * (MathUtils.Cross(ref cp1.rA, ref P1) + MathUtils.Cross(ref cp2.rA, ref P2));

                            vB += mB * (P1 + P2);
                            wB += iB * (MathUtils.Cross(ref cp1.rB, ref P1) + MathUtils.Cross(ref cp2.rB, ref P2));

                            // Accumulate
                            cp1.normalImpulse = x.X;
                            cp2.normalImpulse = x.Y;

#if B2_DEBUG_SOLVER
                            // Postconditions
                            dv1 = vB + MathUtils.Cross(wB, cp1.rB) - vA - MathUtils.Cross(wA, cp1.rA);

                            // Compute normal velocity
                            vn1 = Vector2.Dot(dv1, normal);

                            b2Assert(b2Abs(vn1 - cp1.velocityBias) < k_errorTol);
#endif
                            break;
                        }


                        //
                        // Case 3: vn2 = 0 and x1 = 0
                        //
                        // vn1 = a11 * 0 + a12 * x2 + b1'
                        //   0 = a21 * 0 + a22 * x2 + b2'
                        //
                        x.X = 0.0f;
                        x.Y = -cp2.normalMass * b.Y;
                        vn1 = vc.K.ey.X * x.Y + b.X;
                        vn2 = 0.0f;

                        if (x.Y >= 0.0f && vn1 >= 0.0f)
                        {
                            // Resubstitute for the incremental impulse
                            Vector2 d = x - a;

                            // Apply incremental impulse
                            Vector2 P1 = d.X * normal;
                            Vector2 P2 = d.Y * normal;
                            vA -= mA * (P1 + P2);
                            wA -= iA * (MathUtils.Cross(ref cp1.rA, ref P1) + MathUtils.Cross(ref cp2.rA, ref P2));

                            vB += mB * (P1 + P2);
                            wB += iB * (MathUtils.Cross(ref cp1.rB, ref P1) + MathUtils.Cross(ref cp2.rB, ref P2));

                            // Accumulate
                            cp1.normalImpulse = x.X;
                            cp2.normalImpulse = x.Y;

#if B2_DEBUG_SOLVER
                            // Postconditions
                            dv2 = vB + MathUtils.Cross(wB, cp2.rB) - vA - MathUtils.Cross(wA, cp2.rA);

                            // Compute normal velocity
                            vn2 = Vector2.Dot(dv2, normal);

                            b2Assert(b2Abs(vn2 - cp2.velocityBias) < k_errorTol);
#endif
                            break;
                        }

                        //
                        // Case 4: x1 = 0 and x2 = 0
                        //
                        // vn1 = b1
                        // vn2 = b2;
                        x.X = 0.0f;
                        x.Y = 0.0f;
                        vn1 = b.X;
                        vn2 = b.Y;

                        if (vn1 >= 0.0f && vn2 >= 0.0f)
                        {
                            // Resubstitute for the incremental impulse
                            Vector2 d = x - a;

                            // Apply incremental impulse
                            Vector2 P1 = d.X * normal;
                            Vector2 P2 = d.Y * normal;
                            vA -= mA * (P1 + P2);
                            wA -= iA * (MathUtils.Cross(ref cp1.rA, ref P1) + MathUtils.Cross(ref cp2.rA, ref P2));

                            vB += mB * (P1 + P2);
                            wB += iB * (MathUtils.Cross(ref cp1.rB, ref P1) + MathUtils.Cross(ref cp2.rB, ref P2));

                            // Accumulate
                            cp1.normalImpulse = x.X;
                            cp2.normalImpulse = x.Y;

                            break;
                        }

                        // No solution, give up. This is hit sometimes, but it doesn't seem to matter.
                        break;
                    }
                }

                _velocities[indexA].v = vA;
                _velocities[indexA].w = wA;
                _velocities[indexB].v = vB;
                _velocities[indexB].w = wB;

#if NET40 || NET45 || PORTABLE40 || PORTABLE45 || W10 || W8_1 || WP8_1
                _velocities[orderedIndexB].Lock = 0;
                _velocities[orderedIndexA].Lock = 0;
#endif
            }
        }
Пример #4
0
        public void InitializeVelocityConstraints()
        {
            for (int i = 0; i < _count; ++i)
            {
                ContactVelocityConstraint vc = _velocityConstraints[i];
                ContactPositionConstraint pc = _positionConstraints[i];

                float    radiusA  = pc.radiusA;
                float    radiusB  = pc.radiusB;
                Manifold manifold = _contacts[vc.contactIndex].Manifold;

                int indexA = vc.indexA;
                int indexB = vc.indexB;

                float   mA           = vc.invMassA;
                float   mB           = vc.invMassB;
                float   iA           = vc.invIA;
                float   iB           = vc.invIB;
                Vector2 localCenterA = pc.localCenterA;
                Vector2 localCenterB = pc.localCenterB;

                Vector2 cA = _positions[indexA].c;
                float   aA = _positions[indexA].a;
                Vector2 vA = _velocities[indexA].v;
                float   wA = _velocities[indexA].w;

                Vector2 cB = _positions[indexB].c;
                float   aB = _positions[indexB].a;
                Vector2 vB = _velocities[indexB].v;
                float   wB = _velocities[indexB].w;

                Debug.Assert(manifold.PointCount > 0);

                Transform xfA = new Transform(Vector2.Zero, aA);
                Transform xfB = new Transform(Vector2.Zero, aB);
                xfA.p = cA - Complex.Multiply(ref localCenterA, ref xfA.q);
                xfB.p = cB - Complex.Multiply(ref localCenterB, ref xfB.q);

                Vector2 normal;
                FixedArray2 <Vector2> points;
                WorldManifold.Initialize(ref manifold, ref xfA, radiusA, ref xfB, radiusB, out normal, out points);

                vc.normal = normal;
                Vector2 tangent = MathUtils.Rot270(ref vc.normal);

                int pointCount = vc.pointCount;
                for (int j = 0; j < pointCount; ++j)
                {
                    VelocityConstraintPoint vcp = vc.points[j];

                    vcp.rA = points[j] - cA;
                    vcp.rB = points[j] - cB;

                    float rnA = MathUtils.Cross(ref vcp.rA, ref vc.normal);
                    float rnB = MathUtils.Cross(ref vcp.rB, ref vc.normal);

                    float kNormal = mA + mB + iA * rnA * rnA + iB * rnB * rnB;

                    vcp.normalMass = kNormal > 0.0f ? 1.0f / kNormal : 0.0f;


                    float rtA = MathUtils.Cross(ref vcp.rA, ref tangent);
                    float rtB = MathUtils.Cross(ref vcp.rB, ref tangent);

                    float kTangent = mA + mB + iA * rtA * rtA + iB * rtB * rtB;

                    vcp.tangentMass = kTangent > 0.0f ? 1.0f / kTangent : 0.0f;

                    // Setup a velocity bias for restitution.
                    vcp.velocityBias = 0.0f;
                    float vRel = Vector2.Dot(vc.normal, vB + MathUtils.Cross(wB, ref vcp.rB) - vA - MathUtils.Cross(wA, ref vcp.rA));
                    if (vRel < -Settings.VelocityThreshold)
                    {
                        vcp.velocityBias = -vc.restitution * vRel;
                    }
                }

                // If we have two points, then prepare the block solver.
                if (vc.pointCount == 2)
                {
                    VelocityConstraintPoint vcp1 = vc.points[0];
                    VelocityConstraintPoint vcp2 = vc.points[1];

                    float rn1A = MathUtils.Cross(ref vcp1.rA, ref vc.normal);
                    float rn1B = MathUtils.Cross(ref vcp1.rB, ref vc.normal);
                    float rn2A = MathUtils.Cross(ref vcp2.rA, ref vc.normal);
                    float rn2B = MathUtils.Cross(ref vcp2.rB, ref vc.normal);

                    float k11 = mA + mB + iA * rn1A * rn1A + iB * rn1B * rn1B;
                    float k22 = mA + mB + iA * rn2A * rn2A + iB * rn2B * rn2B;
                    float k12 = mA + mB + iA * rn1A * rn2A + iB * rn1B * rn2B;

                    // Ensure a reasonable condition number.
                    const float k_maxConditionNumber = 1000.0f;
                    if (k11 * k11 < k_maxConditionNumber * (k11 * k22 - k12 * k12))
                    {
                        // K is safe to invert.
                        vc.K.ex       = new Vector2(k11, k12);
                        vc.K.ey       = new Vector2(k12, k22);
                        vc.normalMass = vc.K.Inverse;
                    }
                    else
                    {
                        // The constraints are redundant, just use one.
                        // TODO_ERIN use deepest?
                        vc.pointCount = 1;
                    }
                }
            }
        }
Пример #5
0
        public void Reset(ref TimeStep step, int count, Contact[] contacts, Position[] positions, Velocity[] velocities)
        {
            _count      = count;
            _positions  = positions;
            _velocities = velocities;
            _contacts   = contacts;

            // grow the array
            if (_velocityConstraints == null || _velocityConstraints.Length < count)
            {
                _velocityConstraints = new ContactVelocityConstraint[count * 2];
                _positionConstraints = new ContactPositionConstraint[count * 2];

                for (int i = 0; i < _velocityConstraints.Length; i++)
                {
                    _velocityConstraints[i] = new ContactVelocityConstraint();
                }

                for (int i = 0; i < _positionConstraints.Length; i++)
                {
                    _positionConstraints[i] = new ContactPositionConstraint();
                }
            }

            // Initialize position independent portions of the constraints.
            for (int i = 0; i < _count; ++i)
            {
                Contact contact = contacts[i];

                Fixture  fixtureA = contact.FixtureA;
                Fixture  fixtureB = contact.FixtureB;
                Shape    shapeA   = fixtureA.Shape;
                Shape    shapeB   = fixtureB.Shape;
                float    radiusA  = shapeA.Radius;
                float    radiusB  = shapeB.Radius;
                Body     bodyA    = fixtureA.Body;
                Body     bodyB    = fixtureB.Body;
                Manifold manifold = contact.Manifold;

                int pointCount = manifold.PointCount;
                Debug.Assert(pointCount > 0);

                ContactVelocityConstraint vc = _velocityConstraints[i];
                vc.friction     = contact.Friction;
                vc.restitution  = contact.Restitution;
                vc.tangentSpeed = contact.TangentSpeed;
                vc.indexA       = bodyA.IslandIndex;
                vc.indexB       = bodyB.IslandIndex;
                vc.invMassA     = bodyA._invMass;
                vc.invMassB     = bodyB._invMass;
                vc.invIA        = bodyA._invI;
                vc.invIB        = bodyB._invI;
                vc.contactIndex = i;
                vc.pointCount   = pointCount;
                vc.K.SetZero();
                vc.normalMass.SetZero();

                ContactPositionConstraint pc = _positionConstraints[i];
                pc.indexA       = bodyA.IslandIndex;
                pc.indexB       = bodyB.IslandIndex;
                pc.invMassA     = bodyA._invMass;
                pc.invMassB     = bodyB._invMass;
                pc.localCenterA = bodyA._sweep.LocalCenter;
                pc.localCenterB = bodyB._sweep.LocalCenter;
                pc.invIA        = bodyA._invI;
                pc.invIB        = bodyB._invI;
                pc.localNormal  = manifold.LocalNormal;
                pc.localPoint   = manifold.LocalPoint;
                pc.pointCount   = pointCount;
                pc.radiusA      = radiusA;
                pc.radiusB      = radiusB;
                pc.type         = manifold.Type;

                for (int j = 0; j < pointCount; ++j)
                {
                    ManifoldPoint           cp  = manifold.Points[j];
                    VelocityConstraintPoint vcp = vc.points[j];

                    if (step.warmStarting)
                    {
                        vcp.normalImpulse  = step.dtRatio * cp.NormalImpulse;
                        vcp.tangentImpulse = step.dtRatio * cp.TangentImpulse;
                    }
                    else
                    {
                        vcp.normalImpulse  = 0.0f;
                        vcp.tangentImpulse = 0.0f;
                    }

                    vcp.rA           = Vector2.Zero;
                    vcp.rB           = Vector2.Zero;
                    vcp.normalMass   = 0.0f;
                    vcp.tangentMass  = 0.0f;
                    vcp.velocityBias = 0.0f;

                    pc.localPoints[j] = cp.LocalPoint;
                }
            }
        }