// tried to do this as a BackgroundWorker - way too slow. Need to use the ProgressBarForm this way for
// good performance.
internal static bool DoVersion1Upgrade(Object arg, ProgressBarForm progressBarForm)
{
Document document = arg as Document;
// these should only ever be used here...
const string OffPageReferenceShapeName = "Off-page reference";
const string DynamicConnectorShapeName = "Dynamic connector";
const string OnPageReferenceIncomingShapeName = "On-page reference.Incoming";
const string OnPageReferenceOutgoingShapeName = "On-page reference.Outgoing";
const string SubDialogCallShapeName = "Call Sub-Dialog";
const string CommentShapeName = "Comment";
const string PageShapeName = "Sheet";
const string ReturnShapeName = "Return";
const string PlaceHolderShapeName = "Placeholder";
const string DMTypeCellName = "Prop.DMType";
const string DocumentTitleShapeName = "Document Title";
const string ChangeLogShapeName = "Change Log";
const string TransferShapeName = "Transfer";
const string TransferShapeName2 = "Terminator";
const string HangUpShapeName = "Hang up";
// most transitions can point to terminals (hangup/transfer/return) but not
// maxhandlers - so we need a list without terminals to use for maxhandler conversions
Dictionary <string, List <string> > uniqueIdMap = new Dictionary <string, List <string> >();
Dictionary <string, List <string> > uniqueIdMapNoTerminals = new Dictionary <string, List <string> >();
int total = 0;
foreach (Page page in document.Pages)
{
total += page.Shapes.Count;
}
total = total * 4; // add some extra for the stuff done outside of this loop at the end
int counter = 0;
foreach (Page page in document.Pages)
{
foreach (Shape shape in page.Shapes)
{
ShapeTypes shapeType = ShapeTypes.None;
progressBarForm.SetProgressPercentage(counter++, total);
if (progressBarForm.Cancelled)
{
return(false);
}
string dmType = Common.GetCellString(shape, DMTypeCellName);
if (dmType.Equals("IA", StringComparison.Ordinal))
{
shapeType = ShapeTypes.Interaction;
}
else if (dmType.Equals("PP", StringComparison.Ordinal))
{
shapeType = ShapeTypes.Play;
}
else if (dmType.Equals("DE", StringComparison.Ordinal))
{
shapeType = ShapeTypes.Decision;
}
else if (dmType.Equals("DR", StringComparison.Ordinal))
{
shapeType = ShapeTypes.Data;
}
else if (dmType.Equals("SD", StringComparison.Ordinal))
{
shapeType = ShapeTypes.SubDialog;
}
else if (dmType.Equals("ST", StringComparison.Ordinal))
{
shapeType = ShapeTypes.Start;
}
if (shapeType == ShapeTypes.None)
{
// Figure out what else it could be...
if (shape.Name.StartsWith(DocumentTitleShapeName))
{
shapeType = ShapeTypes.DocTitle;
}
else if (shape.Name.StartsWith(ChangeLogShapeName))
{
shapeType = ShapeTypes.ChangeLog;
}
else if (shape.Name.StartsWith(TransferShapeName) || shape.Name.StartsWith(TransferShapeName2))
{
shapeType = ShapeTypes.Transfer;
}
else if (shape.Name.StartsWith(HangUpShapeName))
{
shapeType = ShapeTypes.HangUp;
}
else if (shape.Name.StartsWith(OffPageReferenceShapeName))
{
shapeType = ShapeTypes.OffPageRef;
}
else if (shape.Name.StartsWith(DynamicConnectorShapeName))
{
shapeType = ShapeTypes.Connector;
}
else if (shape.Name.StartsWith(OnPageReferenceIncomingShapeName))
{
shapeType = ShapeTypes.OnPageRefIn;
}
else if (shape.Name.StartsWith(OnPageReferenceOutgoingShapeName))
{
shapeType = ShapeTypes.OnPageRefOut;
}
else if (shape.Name.StartsWith(SubDialogCallShapeName))
{
shapeType = ShapeTypes.CallSubDialog;
}
else if (shape.Name.StartsWith(CommentShapeName))
{
shapeType = ShapeTypes.Comment;
}
else if (shape.Name.StartsWith(PageShapeName))
{
shapeType = ShapeTypes.Page;
}
else if (shape.Name.StartsWith(ReturnShapeName))
{
shapeType = ShapeTypes.Return;
}
else if (shape.Name.StartsWith(PlaceHolderShapeName))
{
shapeType = ShapeTypes.Placeholder;
}
else
{
postUpgradeReportString += "Shape could not be upgraded properly - " + ShapeDescription(shape) + "\n\n";
shape.Text = Strings.ToBeDeletedLabel;
continue;
}
}
System.Diagnostics.Debug.Assert(shapeType != ShapeTypes.None);
// we really don't need to do anything with the page shapes
// this also includes the rectangles drawn for revision history
if (shapeType == ShapeTypes.Page)
{
continue;
}
// remove the action properties on all shapes
RemoveRightMouseAction(shape, "P&roperties");
// and fix the actions for the ones we care about
if (shapeType != ShapeTypes.OffPageRef && shapeType != ShapeTypes.HangUp &&
shapeType != ShapeTypes.OnPageRefIn && shapeType != ShapeTypes.OnPageRefOut &&
shapeType != ShapeTypes.Return && shapeType != ShapeTypes.Transfer &&
shapeType != ShapeTypes.Comment && shapeType != ShapeTypes.Placeholder &&
shapeType != ShapeTypes.Connector)
{
AddRightMouseAction(shape, "P&roperties", "RUNADDONWARGS(\"QueueMarkerEvent\",\"/PathMaker /CMD=2\")",
true, false, false, false);
}
// delete old rows no longer used
DeleteOldPropertyCell(shape, "Prop.TestPlanSetting");
DeleteOldPropertyCell(shape, "Prop.CheckPoints");
DeleteOldPropertyCell(shape, "Prop.UpdateData");
DeleteOldPropertyCell(shape, "Prop.LineName");
DeleteOldPropertyCell(shape, "Prop.Input");
DeleteOldPropertyCell(shape, "Prop.Output");
DeleteOldPropertyCell(shape, "Prop.OSDM");
DeleteOldPropertyCell(shape, "Prop.Destination");
DeleteOldPropertyCell(shape, "Prop.ColumnData");
DeleteOldPropertyCell(shape, "Prop.EnteringFrom");
DeleteOldPropertyCell(shape, "Prop.StartingDialogState");
DeleteOldPropertyCell(shape, "Prop.StartingDM");
DeleteOldPropertyCell(shape, "Prop.ChangeDate");
DeleteOldPropertyCell(shape, "Prop.InitialDate");
DeleteOldPropertyCell(shape, "Prop.LogoFilePath");
DeleteOldPropertyCell(shape, "Prop.LastUpdate");
if (shapeType == ShapeTypes.CallSubDialog)
{
// none of these are used...
DeleteOldPropertyCell(shape, "Prop.DMName");
DeleteOldPropertyCell(shape, "Prop.EnteringFrom");
DeleteOldPropertyCell(shape, "Prop.StartingDialogState");
DeleteOldPropertyCell(shape, "Prop.Notes");
DeleteOldPropertyCell(shape, "Prop.LastUpdate");
DeleteOldPropertyCell(shape, "Prop.Transitions");
}
else if (shapeType == ShapeTypes.SubDialog)
{
DeleteOldPropertyCell(shape, "Prop.Transitions");
}
// Add a new cell containing the name of the subdialog being called
// Later it will be converted to a UID
if (shapeType == ShapeTypes.CallSubDialog)
{
Common.SetCellString(shape, ShapeProperties.CallSubDialog.SubDialogUID, shape.Text);
}
// rename rows that are confusing
RenameRow(shape, "Prop.DialogParameters", ShapeProperties.SpecialSettings, "Special Settings");
RenameRow(shape, "Prop.DMName", ShapeProperties.StateId, "State Name");
RenameRow(shape, "Prop.DMType", ShapeProperties.ShapeType, "Shape Type");
RenameRow(shape, "Prop.InputData", ShapeProperties.Start.Initialization, "Initialization");
RenameRow(shape, "Prop.GlobalCommands", ShapeProperties.CommandTransitions, "Command Transitions");
RenameRow(shape, "Prop.GlobalPrompts", ShapeProperties.PromptTypes, "Prompt Types");
RenameRow(shape, "Prop.GlobalConfirmations", ShapeProperties.ConfirmationPrompts, "Confirmation Prompts");
RenameRow(shape, "Prop.TitleLine1", ShapeProperties.DocTitle.ClientName, "Client Name");
RenameRow(shape, "Prop.TitleLine2", ShapeProperties.DocTitle.ProjectName, "Project Name");
if (shapeType == ShapeTypes.Interaction)
{
RenameRow(shape, "Prop.Transitions", "Prop.CommandTransitions", "Command Transitions");
RenameRow(shape, "Prop.Prompts", "Prop.PromptTypes", "Prompt Types");
}
// undo encoding we'll never use
UnencodeProperty(shape, ShapeProperties.ChangeLog.Changes);
UnencodeProperty(shape, ShapeProperties.Start.DefaultSettings);
UnencodeProperty(shape, ShapeProperties.Start.Initialization);
UnencodeProperty(shape, ShapeProperties.MaxHandling);
UnencodeProperty(shape, ShapeProperties.Play.Prompts);
UnencodeProperty(shape, ShapeProperties.PromptTypes);
UnencodeProperty(shape, ShapeProperties.Transitions);
UnencodeProperty(shape, ShapeProperties.CommandTransitions);
UnencodeProperty(shape, ShapeProperties.SpecialSettings);
UnencodeProperty(shape, ShapeProperties.DeveloperNotes);
UnencodeProperty(shape, ShapeProperties.ConfirmationPrompts);
UnencodeProperty(shape, ShapeProperties.LastUpdate);
// make each shape get a GUID
string uniqueId = shape.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID);
// off page refs have two shapes with the same name and we don't need them for this
if (shapeType != ShapeTypes.OffPageRef)
{
List <string> list = null;
if (uniqueIdMap.TryGetValue(shape.Name, out list))
{
list.Add(uniqueId);
}
else
{
list = new List <string>();
list.Add(uniqueId);
uniqueIdMap.Add(shape.Name, list);
}
if (shapeType != ShapeTypes.Placeholder && shapeType != ShapeTypes.HangUp &&
shapeType != ShapeTypes.Transfer && shapeType != ShapeTypes.Return)
{
list = null;
if (uniqueIdMapNoTerminals.TryGetValue(shape.Name, out list))
{
list.Add(uniqueId);
}
else
{
list = new List <string>();
list.Add(uniqueId);
uniqueIdMapNoTerminals.Add(shape.Name, list);
}
}
}
// change all double click handlers
if (shapeType == ShapeTypes.DocTitle || shapeType == ShapeTypes.ChangeLog ||
shapeType == ShapeTypes.Start || shapeType == ShapeTypes.Interaction ||
shapeType == ShapeTypes.Play || shapeType == ShapeTypes.Decision ||
shapeType == ShapeTypes.Data || shapeType == ShapeTypes.SubDialog ||
shapeType == ShapeTypes.CallSubDialog)
{
Common.SetCellFormula(shape, "EventDblClick", "RUNADDONWARGS(\"QueueMarkerEvent\",\"/PathMaker /CMD=1\")");
}
// global transitions need a new column to match the interaction transitions
if (shapeType == ShapeTypes.Start)
{
Table table = Common.GetCellTable(shape, ShapeProperties.CommandTransitions);
if (!table.IsEmpty())
{
int newCol = table.AddColumn();
System.Diagnostics.Debug.Assert(newCol == 18);
// copies the goto column to the line column to match interactions
table.CopyColumn(7, 18);
Common.SetCellTable(shape, ShapeProperties.CommandTransitions, table);
}
}
// unlock most shape text edits - remember play and interaction are multiple shapes
if (shapeType == ShapeTypes.Data || shapeType == ShapeTypes.Decision ||
shapeType == ShapeTypes.Interaction || shapeType == ShapeTypes.Play || shapeType == ShapeTypes.SubDialog)
{
shape.get_CellsSRC((short)VisSectionIndices.visSectionObject,
(short)VisRowIndices.visRowLock,
(short)VisCellIndices.visLockTextEdit).FormulaU = "0";
}
if (shapeType == ShapeTypes.Interaction || shapeType == ShapeTypes.Play)
{
shape.Shapes[1].get_CellsSRC((short)VisSectionIndices.visSectionObject,
(short)VisRowIndices.visRowLock,
(short)VisCellIndices.visLockTextEdit).FormulaU = "0";
// and bring it to front so you are editing the shape name by default
shape.Shapes[1].BringToFront();
}
// the old stuff never locked call sub dialogs - we want to
if (shapeType == ShapeTypes.CallSubDialog)
{
shape.get_CellsSRC((short)VisSectionIndices.visSectionObject,
(short)VisRowIndices.visRowLock,
(short)VisCellIndices.visLockTextEdit).FormulaU = "1";
}
// normalize/fix all the grid datastore stuff - get rid of unused columns, etc.
// remove plus, minus, goto, update_plus, update_minus, cp_idx
RemoveColumnsFromCellTable(shape, ShapeProperties.CommandTransitions, new int[6] {
3, 5, 7, 12, 14, 19
});
// remove plus, minus, update_plus, update_minus
RemoveColumnsFromCellTable(shape, ShapeProperties.ConfirmationPrompts, new int[4] {
1, 3, 7, 9
});
// remove plus, minus, updateplus, updateminus
RemoveColumnsFromCellTable(shape, ShapeProperties.PromptTypes, new int[4] {
1, 3, 7, 9
});
// remove plus, minus, updateplus, updateminus, cp_idx
RemoveColumnsFromCellTable(shape, ShapeProperties.Play.Prompts, new int[5] {
0, 2, 5, 7, 10
});
// remove plus, minus, goto, updateplus, updateminus
RemoveColumnsFromCellTable(shape, ShapeProperties.Transitions, new int[5] {
0, 2, 4, 5, 7
});
// remove highlight index column
RemoveColumnsFromCellTable(shape, ShapeProperties.ChangeLog.Changes, new int[1] {
5
});
// clear any old changelog descriptions from the page itself
if (shapeType == ShapeTypes.ChangeLog)
{
Page changeLogPage = shape.ContainingPage;
for (int count = changeLogPage.Shapes.Count; count > 0; count--)
{
if (changeLogPage.Shapes[count] != shape)
{
changeLogPage.Shapes[count].Delete();
}
}
}
// Start has the max handlers in a different order than the interaction states - fix it here
if (shapeType == ShapeTypes.Start)
{
SwapRowsInCellTable(shape, ShapeProperties.MaxHandling, 0, 1);
}
// Get rid of expressware checkpoints default setting
if (shapeType == ShapeTypes.Start)
{
Table table = Common.GetCellTable(shape, ShapeProperties.Start.DefaultSettings);
for (int r = 0; r < table.GetNumRows(); r++)
{
if (table.GetData(r, 0).Equals("ExpressWare Checkpoints"))
{
table.DeleteRow(r);
break;
}
}
}
// apparently subDialogs developer notes were not written out as a two column entry (one for date of change)
if (shapeType == ShapeTypes.SubDialog)
{
EnsureTwoColumns(shape, ShapeProperties.DeveloperNotes);
}
// set shape type - this will add it if necessary - make sure to use int value
Common.SetCellFormula(shape, ShapeProperties.ShapeType, ((int)shapeType).ToString());
SetRowLabel(shape, ShapeProperties.ShapeType, "Shape Type");
}
}
// we remove change log stuff above - need to recount the remaining totals
total = 0;
foreach (Page page in document.Pages)
{
total += page.Shapes.Count;
}
total = counter + (total * 3); // we'll go through 3 times below
// The following stuff needed to wait until every state had a GUID
// change all references from state ids/names to use GUIDs
foreach (Page page in document.Pages)
{
foreach (Shape shape in page.Shapes)
{
// column 13 should now be the link column
ReplaceStateIdsWithUniqueIds(shape, uniqueIdMap, ShapeProperties.CommandTransitions, 13);
// column 5 should be the link column
ReplaceStateIdsWithUniqueIds(shape, uniqueIdMap, ShapeProperties.Transitions, 5);
// column 3 should be the goto column
ReplaceStateIdsWithUniqueIds(shape, uniqueIdMapNoTerminals, ShapeProperties.MaxHandling, 3);
// it's a singleton, not a table - only exists on call subdialogs
ReplaceStateIdWithUniqueIds(shape, uniqueIdMap, ShapeProperties.CallSubDialog.SubDialogUID);
progressBarForm.SetProgressPercentage(counter++, total);
if (progressBarForm.Cancelled)
{
return(false);
}
}
}
// fix off page connectors
Dictionary <string, Shape> offPageShapeNameMap = new Dictionary <string, Shape>();
foreach (Page page in document.Pages)
{
foreach (Shape shape in page.Shapes)
{
if (Common.GetShapeType(shape) == ShapeTypes.OffPageRef)
{
// common fixes
// hyperlinks point to pages, not shapes, even if the shape is deleted - drop these
short row;
if (shape.get_CellExists(ShapeProperties.OffPageRef.HyperLink, (short)VisExistsFlags.visExistsAnywhere) != 0)
{
row = shape.get_CellsRowIndex(ShapeProperties.OffPageRef.HyperLink);
shape.DeleteRow((short)VisSectionIndices.visSectionHyperlink, row);
}
if (shape.get_CellExists("Hyperlink.PageLinkDest", (short)VisExistsFlags.visExistsAnywhere) != 0)
{
row = shape.get_CellsRowIndex("Hyperlink.PageLinkDest");
shape.DeleteRow((short)VisSectionIndices.visSectionHyperlink, row);
}
// the standard off-page connector dbl click handler works fine
Common.SetCellFormula(shape, ShapeProperties.EventDblClick, Strings.OffPageConnectorDblClickCommand);
// the standard off-page connector drop handler works fine
Common.SetCellFormula(shape, ShapeProperties.EventDrop, Strings.OffPageConnectorDropCommand);
// keep the text synchronized
Common.SetCellFormula(shape, ShapeProperties.TheText, Strings.OffPageConnectorTextCommand);
// delete actions to change shape to circle/arrow
row = shape.get_CellsRowIndex("Actions.Row_3");
shape.DeleteRow((short)VisSectionIndices.visSectionAction, row);
row = shape.get_CellsRowIndex("Actions.Row_4");
shape.DeleteRow((short)VisSectionIndices.visSectionAction, row);
Shape target;
if (offPageShapeNameMap.TryGetValue(shape.Text, out target))
{
// we have a pair...
Common.SetCellString(shape, ShapeProperties.OffPageConnectorShapeID,
shape.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
Common.SetCellString(shape, ShapeProperties.OffPageConnectorDestinationPageID,
target.ContainingPage.PageSheet.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
Common.SetCellString(shape, ShapeProperties.OffPageConnectorDestinationShapeID,
target.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
Common.SetCellString(target, ShapeProperties.OffPageConnectorShapeID,
target.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
Common.SetCellString(target, ShapeProperties.OffPageConnectorDestinationPageID,
shape.ContainingPage.PageSheet.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
Common.SetCellString(target, ShapeProperties.OffPageConnectorDestinationShapeID,
shape.get_UniqueID((short)VisUniqueIDArgs.visGetOrMakeGUID));
offPageShapeNameMap.Remove(shape.Text);
}
else
{
offPageShapeNameMap.Add(shape.Text, shape);
}
}
progressBarForm.SetProgressPercentage(counter++, total);
if (progressBarForm.Cancelled)
{
return(false);
}
}
}
// In CID you could have on-page connectors backwards - check for them here
foreach (Page page in document.Pages)
{
foreach (Shape shape in page.Shapes)
{
if (Common.GetShapeType(shape) == ShapeTypes.OnPageRefIn)
{
bool arrowSide = false;
foreach (Connect c in shape.FromConnects)
{
// determine which end of the connector is connected to the nonConnectorShadow
if (c.FromCell.Name.Equals(Strings.EndConnectionPointCellName))
{
arrowSide = true;
}
}
// if we are on the arrow side of the connector, that means this is an input connector
if (arrowSide)
{
postUpgradeReportString += "On page reference input can't have inputs - " + ShapeDescription(shape) + "\n\n";
catastrophicError = true;
}
}
else if (Common.GetShapeType(shape) == ShapeTypes.OnPageRefOut)
{
bool arrowSide = true;
foreach (Connect c in shape.FromConnects)
{
// determine which end of the connector is connected to the nonConnectorShadow
if (c.FromCell.Name.Equals(Strings.EndConnectionPointCellName))
{
arrowSide = true;
}
// if we are on the non-arrow side of the connector, that means this is an output connector
if (!arrowSide)
{
postUpgradeReportString += "On page reference output can't have outputs - " + ShapeDescription(shape) + "\n\n";
catastrophicError = true;
}
}
}
}
}
// any left over are not hooked up - this is a problem...
if (offPageShapeNameMap.Count > 0)
{
for (int i = 0; i < offPageShapeNameMap.Count; i++)
{
Shape noMatch = offPageShapeNameMap.Values.ElementAt(i);
postUpgradeReportString += "No matching off page connector found for " + ShapeDescription(noMatch) + "\n\n";
noMatch.Text = Strings.ToBeDeletedLabel;
}
}
// Last thing to do - now that we can use all the new column names, we want to find all table fields using $$ and fix them
foreach (Page page in document.Pages)
{
foreach (Shape shape in page.Shapes)
{
FixDollarDollarTableFields(shape, ShapeProperties.CommandTransitions);
FixDollarDollarTableFields(shape, ShapeProperties.PromptTypes);
FixDollarDollarTableFields(shape, ShapeProperties.ConfirmationPrompts);
FixDollarDollarTableFields(shape, ShapeProperties.MaxHandling);
FixDollarDollarTableFields(shape, ShapeProperties.DeveloperNotes);
FixDollarDollarTableFields(shape, ShapeProperties.SpecialSettings);
FixDollarDollarTableFields(shape, ShapeProperties.Transitions);
FixDollarDollarTableFields(shape, ShapeProperties.Play.Prompts);
FixDollarDollarTableFields(shape, ShapeProperties.Start.DefaultSettings);
FixDollarDollarTableFields(shape, ShapeProperties.Start.Initialization);
progressBarForm.SetProgressPercentage(counter++, total);
if (progressBarForm.Cancelled)
{
return(false);
}
}
}
progressBarForm.SetProgressPercentage(100, 100);
progressBarForm.Hide();
progressBarForm = null;
return(true);
}
// This is where you plug in your upgrade if need be. These should only be
// necessary for schema changes - releases where the shape data has changed.
// Add an if statement for your version as described below
internal static bool UpgradeDocumentToCurrentSchemaVersion(Document document)
{
int docSchemaVersion = Common.GetDocumentSchemaVersion(document);
postUpgradeReportString = "";
catastrophicError = false;
/**
* Add another if statement here NOT AN ELSE IF so that the document will go
* through all upgrades that are less than it's schema version
* For example, two upgrades would look like this
* if (docSchemaVersion < 1)
* progressBarForm = new ProgressBarForm(DoVersion1Upgrade);
* if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
* return false;
* if (docSchemaVersion < 2)
* progressBarForm = new ProgressBarForm(DoVersion1Upgrade);
* if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
* return false;
* etc.
*/
if (docSchemaVersion < 1)
{
// initial release of PathRunner
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 1", DoVersion1Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < 2)
{
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 2", DoVersion2Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < 3)
{
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 3", DoVersion3Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < 4)
{
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 4", DoVersion4Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < 5)
{
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 5", DoVersion5Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < 6)
{
ProgressBarForm progressBarForm = new ProgressBarForm("Upgrading to schema version 6", DoVersion6Upgrade, document);
if (progressBarForm.ShowDialog() != System.Windows.Forms.DialogResult.OK)
{
return(false);
}
}
if (docSchemaVersion < Common.GetResourceInt(Strings.PathMakerSchemaVersionRes))
{
if (postUpgradeReportString.Length > 0)
{
if (catastrophicError)
{
postUpgradeReportString =
"The upgrade of this file resulted in at least one major error that requires you " +
"go back into CID and fix something. You'll need to do that and export to PathMaker " +
"again before proceeding.\n\n" + postUpgradeReportString;
}
else
{
postUpgradeReportString =
"The upgrade of this file resulted in one or more minor issues. " +
"To cleanup errors, search for shapes with the label \"" + Strings.ToBeDeletedLabel + "\". " +
"Those shapes will need to be removed and replaced if necessary - do not use them.\n\n" +
postUpgradeReportString;
}
System.Windows.Forms.MessageBox.Show(postUpgradeReportString, "Upgrade Problem Report");
}
if (catastrophicError)
{
return(false);
}
Common.SetDocumentSchemaVersion(document);
}
return(true);
}
