//Case 1540: 1.1.01.15_OpenObject_CmdLineNormal_withAppType
public void Run_Application_OpenObject_CmdLine_withAppType_Case1540()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "OpenObjectV2");
ApplicationServiceV2 app = new ApplicationServiceV2();
AppOpenObjectsRequestType appRequest = new AppOpenObjectsRequestType();
appRequest.instanceIDList = new string[512];
appRequest.parameters = new ParameterType[512];
int pnum = 0;
int idnum = 0;
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "NA":
switch (ids.InputParameters.GetParameter(i).Key)
{
case "instanceid":
appRequest.instanceIDList[idnum] = ids.InputParameters.GetParameter(i).Value;
idnum++;
break;
case "appType":
switch (ids.InputParameters.GetParameter(i).Value)
{
case "TwoDViewer":
appRequest.application = ApplicationType.TwoDViewer;
break;
case "ThreeDViewer":
appRequest.application = ApplicationType.ThreeDViewer;
break;
case "Cosmetic":
appRequest.application = ApplicationType.Cosmetic;
break;
case "Logicon":
appRequest.application = ApplicationType.Logicon;
break;
case "CSRestore":
appRequest.application = ApplicationType.CSRestore;
break;
case "CSModel":
appRequest.application = ApplicationType.CSModel;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
break;
}
break;
case "parameters":
ParameterType p = new ParameterType();
switch (ids.InputParameters.GetParameter(i).Key)
{
case "configuration":
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "helpLanguage":
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "language":
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
appRequest.parameters[pnum] = p;
pnum++;
break;
}
}
CheckPoint pOpen = new CheckPoint("Open ObjectV2", "Open Object for commandline");
r.CheckPoints.Add(pOpen);
AppOpenObjectsResponseType response = app.openObject(appRequest);
if (!app.LastReturnXMLValidateResult.isValid)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Invalid format", "Response is not complied with XML Schema");
SaveRound(r);
continue;
}
if (response.status.code != 0)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Fail", "Open " + appRequest.application.ToString() + " Fail," + response.status.message);
SaveRound(r);
continue;
}
System.Threading.Thread.Sleep(2000);
System.IO.DirectoryInfo d = new System.IO.DirectoryInfo(System.IO.Directory.GetCurrentDirectory());
System.Collections.ArrayList arguments = new System.Collections.ArrayList();
foreach (System.IO.FileInfo f in d.GetFiles("openObject*.log"))
{
System.IO.StreamReader sr = f.OpenText();
arguments.Add(sr.ReadLine());
sr.Close();
f.Delete();
}
if (arguments.Count != 1)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Fail", "Open " + appRequest.application.ToString() + " Fail,File not found or needs to clean log file openObject*.log and run the test again");
SaveRound(r);
continue;
}
if (arguments[0].ToString() == (ids.ExpectedValues.GetParameter("arguments").Value))
{
pOpen.Result = TestResult.Pass;
pOpen.Outputs.AddParameter("Open ObjectV2", "Success", "Open " + appRequest.application.ToString() + " OK");
}
else
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Arguments not expected", "Open " + appRequest.application.ToString() + " Fail." + "Actural Arguments:" + arguments[0].ToString());
}
SaveRound(r);
}
Output();
}
//Case 1541: 1.1.01.16_OpenObject_CmdLineNormal_with no appType
public void Run_Application_OpenObject_CmdLine_noappType_Case1541()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "OpenObjectV2");
object request = "<?xml version=\"1.0\"?>" +
"<tns:appOpenObjectsRequest xmlns:tns=\"http://www.carestreamhealth.com/CSI/CSDM/1/Schema\"" +
" xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:schemaLocation=\"http://www.carestreamhealth.com/CSI/CSDM/1/Schema" +
"ApplicationOpenObjectsRequest.xsd \">" +
"<tns:instanceIDList>" +
"<tns:instanceID>" + ids.InputParameters.GetParameter("instanceid").Value + "</tns:instanceID>" +
"</tns:instanceIDList>" +
"<parameters/>" +
"</tns:appOpenObjectsRequest>";
ApplicationServiceV2 app = new ApplicationServiceV2();
CheckPoint pOpen = new CheckPoint("Open ObjectV2", "Open Object for commandline no apptype");
r.CheckPoints.Add(pOpen);
string response = (string)app.InvokeMethod("openObjects", new object[] { request });
if (!response.Contains("ok"))
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("openObjectV2", "Open Fail", response);
SaveRound(r);
continue;
}
System.Threading.Thread.Sleep(2000);
System.IO.DirectoryInfo d = new System.IO.DirectoryInfo(System.IO.Directory.GetCurrentDirectory());
System.Collections.ArrayList arguments = new System.Collections.ArrayList();
foreach (System.IO.FileInfo f in d.GetFiles("openObject*.log"))
{
System.IO.StreamReader sr = f.OpenText();
arguments.Add(sr.ReadLine());
sr.Close();
f.Delete();
}
if (arguments.Count != 1)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Fail", "Fail,File not found or needs to clean log file in c:\\csautotest and run the test again");
SaveRound(r);
continue;
}
if (arguments[0].ToString() == (ids.ExpectedValues.GetParameter("arguments").Value))
{
pOpen.Result = TestResult.Pass;
pOpen.Outputs.AddParameter("Open ObjectV2", "Success", "Open OK");
}
else
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Arguments not expected", "Open Fail." + "Actural Arguments:" + arguments[0].ToString());
}
SaveRound(r);
}
Output();
}
// Case 1525: 1.1.01.13_Call OpenObject to open objects with 2D Viewer
public void Run_Application_OpenObjectWith2D_Normal_Case1525()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Open Object with 2D Viewer");
r.Key = ids.Key;
r.Description = ids.Description;
ApplicationServiceV2 applicationSvc = new ApplicationServiceV2();
AppOpenObjectsRequestType pOpenObject = new AppOpenObjectsRequestType();
System.Collections.Generic.List<string> objectIDList = new System.Collections.Generic.List<string>();
System.Collections.Generic.List<ParameterType> parameterList = new System.Collections.Generic.List<ParameterType>();
#region Test data: to construct the request parameter
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "openObject")
{
if (ids.InputParameters.GetParameter(i).Key == "application")
{
pOpenObject.application = (ApplicationType)Enum.Parse(typeof(ApplicationType), ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "instanceID")
{
objectIDList.Add(ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "configuration")
{
ParameterType p = new ParameterType();
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "language")
{
ParameterType p = new ParameterType();
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "helpLanguage")
{
ParameterType p = new ParameterType();
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
}
}
pOpenObject.instanceIDList = objectIDList.ToArray();
pOpenObject.parameters = parameterList.ToArray();
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown: ", "Initialize request parameter", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
#endregion
#region Test data: to construct the expected values
string epErrorCode = string.Empty;
string epErrorMessage = string.Empty;
string processName = "imaging";
for (int i = 0; i < ids.ExpectedValues.Count; i++)
{
if (ids.ExpectedValues.GetParameter(i).Step == "openObject")
{
if (ids.ExpectedValues.GetParameter(i).Key == "error_code")
{
epErrorCode = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "error_message")
{
epErrorMessage = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "processName")
{
processName = ids.ExpectedValues.GetParameter(i).Value;
}
}
}
#endregion
try
{
#region Step1 : Call ApplicationService.openObject
CheckPoint cpOpenObject = new CheckPoint("openObject", "Call ApplicationService.openObject");
r.CheckPoints.Add(cpOpenObject);
//Send web service request
AppOpenObjectsResponseType rtOpenObjects = applicationSvc.openObject(pOpenObject);
//Wait 2D to start
System.Threading.Thread.Sleep(20000);
if (applicationSvc.LastReturnXMLValidateResult.isValid)
{
if (rtOpenObjects.status.code.ToString() == epErrorCode && rtOpenObjects.status.message.Contains(epErrorMessage))
{
cpOpenObject.Result = TestResult.Pass;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns correct: " + applicationSvc.LastReturnXML);
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns error: " + applicationSvc.LastReturnXML);
}
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject return invalid XML string: " + applicationSvc.LastReturnXML);
}
#endregion
#region Step 2: Check the program instance is lanched or not
CheckPoint cpProcess = new CheckPoint("openObject", "Check the 2D Viewer process after call openObject");
r.CheckPoints.Add(cpProcess);
System.Diagnostics.Process[] processes = System.Diagnostics.Process.GetProcessesByName(processName);
if (processes.Length == 1)
{
cpProcess.Result = TestResult.Pass;
cpProcess.Outputs.AddParameter("OpenObject", "Check 2D Viewer process", "The 2D viewer is running well after call openObject");
processes[0].Kill();
System.Threading.Thread.Sleep(1000);
}
else
{
cpProcess.Result = TestResult.Fail;
cpProcess.Outputs.AddParameter("OpenObject", "Check 2D Viewer process", "The 2D viewer is not running well after call openObject. The process number is: " + processes.Length);
foreach (System.Diagnostics.Process p in processes)
{
p.Kill();
System.Threading.Thread.Sleep(2000);
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown", "Case Run", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
}
Output();
}
//Case 1520: 1.1.01.10_OpenObjects_E02_TypeMismatch
public void Run_Application_OpenObjects_E02_TypeMismatch_Case1520()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "OpenObjectV2");
ApplicationServiceV2 app = new ApplicationServiceV2();
AppOpenObjectsRequestType appRequest = new AppOpenObjectsRequestType();
appRequest.instanceIDList = new string[512];
appRequest.parameters = new ParameterType[512];
int pnum = 0;
int idnum = 0;
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "NA":
switch (ids.InputParameters.GetParameter(i).Key)
{
case "instanceid":
appRequest.instanceIDList[idnum] = ids.InputParameters.GetParameter(i).Value;
idnum++;
break;
case "appType":
switch (ids.InputParameters.GetParameter(i).Value)
{
case "TwoDViewer":
appRequest.application = ApplicationType.TwoDViewer;
break;
case "ThreeDViewer":
appRequest.application = ApplicationType.ThreeDViewer;
break;
case "Cosmetic":
appRequest.application = ApplicationType.Cosmetic;
break;
case "Logicon":
appRequest.application = ApplicationType.Logicon;
break;
case "CSRestore":
appRequest.application = ApplicationType.CSRestore;
break;
case "CSModel":
appRequest.application = ApplicationType.CSModel;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
break;
}
break;
case "parameters":
ParameterType p = new ParameterType();
switch (ids.InputParameters.GetParameter(i).Key)
{
case "configuration":
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "helpLanguage":
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "language":
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
appRequest.parameters[pnum] = p;
pnum++;
break;
}
}
CheckPoint pOpen = new CheckPoint("Open ObjectV2", "Open Object for " + appRequest.application + " type mismatch");
r.CheckPoints.Add(pOpen);
AppOpenObjectsResponseType response = app.openObject(appRequest);
if (!app.LastReturnXMLValidateResult.isValid)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Invalid format", "Response is not complied with XML Schema");
SaveRound(r);
continue;
}
if (response.status.code != int.Parse(ids.ExpectedValues.GetParameter("errcode").Value))
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Type Mismatch", "Expected Code 301.Actual:" + response.status.code.ToString() + response.status.message);
SaveRound(r);
continue;
}
else
{
pOpen.Result = TestResult.Pass;
pOpen.Outputs.AddParameter("Open ObjectV2", "Type Mismatch", "OK");
}
SaveRound(r);
}
Output();
}
// Case 1629: 1.1.01.17_Call OpenObject to open 3D analysis_Normal
public void Run_Application_Open3DAnalysis_Normal_Case1629()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Open Object with 3D Viewer");
r.Key = ids.Key;
r.Description = ids.Description;
try
{
bool isCreate = false;
Analysis3DService analysis3DSvc = new Analysis3DService();
ApplicationServiceV2 applicationSvc = new ApplicationServiceV2();
AppOpenObjectsRequestType pOpenObject = new AppOpenObjectsRequestType();
string p01_instanceUID = null;
XMLParameter p02_xmlAnalysis3DInfo = new XMLParameter("analysis3d");
p02_xmlAnalysis3DInfo.AddParameter("name", "name");
p02_xmlAnalysis3DInfo.AddParameter("analysis3D_xml", "analysis3D_xml");
p02_xmlAnalysis3DInfo.AddParameter("current", "true");
System.Collections.Generic.List<string> objectIDList = new System.Collections.Generic.List<string>();
System.Collections.Generic.List<ParameterType> parameterList = new System.Collections.Generic.List<ParameterType>();
#region Test data: to construct the request parameter
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
if (ids.InputParameters.GetParameter(i).Step == "createAnalysis3D")
{
isCreate = true;
if (ids.InputParameters.GetParameter(i).Key == "p01_instanceUID")
{
p01_instanceUID = ids.InputParameters.GetParameter(i).Value;
}
}
else if (ids.InputParameters.GetParameter(i).Step == "openObject")
{
if (ids.InputParameters.GetParameter(i).Key == "application")
{
pOpenObject.application = (ApplicationType)Enum.Parse(typeof(ApplicationType), ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "instanceID")
{
objectIDList.Add(ids.InputParameters.GetParameter(i).Value);
}
else if (ids.InputParameters.GetParameter(i).Key == "configuration")
{
ParameterType p = new ParameterType();
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "language")
{
ParameterType p = new ParameterType();
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
else if (ids.InputParameters.GetParameter(i).Key == "helpLanguage")
{
ParameterType p = new ParameterType();
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
parameterList.Add(p);
}
}
}
pOpenObject.instanceIDList = objectIDList.ToArray();
pOpenObject.parameters = parameterList.ToArray();
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown: ", "Initialize request parameter", ex.Message);
cp.Result = TestResult.Fail;
SaveRound(r);
}
#endregion
#region Test data: to construct the expected values
string epErrorCode = string.Empty;
string epErrorMessage = string.Empty;
string processName = "imaging";
for (int i = 0; i < ids.ExpectedValues.Count; i++)
{
if (ids.ExpectedValues.GetParameter(i).Step == "openObject")
{
if (ids.ExpectedValues.GetParameter(i).Key == "error_code")
{
epErrorCode = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "error_message")
{
epErrorMessage = ids.ExpectedValues.GetParameter(i).Value;
}
else if (ids.ExpectedValues.GetParameter(i).Key == "processName")
{
processName = ids.ExpectedValues.GetParameter(i).Value;
}
}
}
#endregion
#region Step 1: Create Anaylisis
if (isCreate)
{
CheckPoint cpCreateAnayisys = new CheckPoint("createAnalysis3D", "Call Analysis3DSvc.createAnalysis3D to create 3D analysis");
r.CheckPoints.Add(cpCreateAnayisys);
XMLResult rtCreateAnaylisis = analysis3DSvc.createAnalysis3D(p01_instanceUID, p02_xmlAnalysis3DInfo);
if (rtCreateAnaylisis.IsErrorOccured)
{
cpCreateAnayisys.Result = TestResult.Fail;
cpCreateAnayisys.Outputs.AddParameter("Create Analysis", "Result", "Fail. Return Message: " + rtCreateAnaylisis.ResultContent);
}
else
{
cpCreateAnayisys.Result = TestResult.Pass;
cpCreateAnayisys.Outputs.AddParameter("Create Analysis", "Result", "Succeed");
objectIDList.Add(rtCreateAnaylisis.SingleResult);
pOpenObject.instanceIDList = objectIDList.ToArray();
}
}
#endregion
#region Step2 : Call ApplicationService.openObject
CheckPoint cpOpenObject = new CheckPoint("openObject", "Call ApplicationService.openObject");
r.CheckPoints.Add(cpOpenObject);
//Send web service request
AppOpenObjectsResponseType rtOpenObjects = applicationSvc.openObject(pOpenObject);
if (applicationSvc.LastReturnXMLValidateResult.isValid)
{
if (rtOpenObjects.status.code.ToString() == epErrorCode && rtOpenObjects.status.message.Contains(epErrorMessage))
{
cpOpenObject.Result = TestResult.Pass;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns correct: " + applicationSvc.LastReturnXML);
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject returns error: " + applicationSvc.LastReturnXML);
}
}
else
{
cpOpenObject.Result = TestResult.Fail;
cpOpenObject.Outputs.AddParameter("OpenObject", "Check return value", "The openObject return invalid XML string: " + applicationSvc.LastReturnXML);
}
#endregion
//Wait to start
System.Threading.Thread.Sleep(10000);
#region Step 2: Check the program instance is lanched or not
CheckPoint cpProcess = new CheckPoint("openObject", "Check the application process after call openObject");
r.CheckPoints.Add(cpProcess);
System.Diagnostics.Process[] processes = System.Diagnostics.Process.GetProcessesByName(processName);
if (processes.Length == 1)
{
cpProcess.Result = TestResult.Pass;
cpProcess.Outputs.AddParameter("OpenObject", "Check process", "The application is running well after call openObject");
processes[0].Kill();
System.Threading.Thread.Sleep(1000);
}
else
{
// todo: 2012/11/29, 19006723: comment out this as the 3D applcation does not support open analysis yet, change back this after it's ready
//cpProcess.Result = TestResult.Fail;
cpProcess.Result = TestResult.Pass;
cpProcess.Outputs.AddParameter("OpenObject", "Check process", "The application is not running well after call openObject. The process number is: " + processes.Length);
foreach (System.Diagnostics.Process p in processes)
{
p.Kill();
System.Threading.Thread.Sleep(1000);
}
}
#endregion
#region Step 3: delete created analysis
if (isCreate)
{
foreach (string id in objectIDList)
{
XMLResult rtDeleteAnalysis = analysis3DSvc.deleteAnalysis3D(id);
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Outputs.AddParameter("Exception thrown", "Case Run", ex.Message + ex.InnerException == null ? "" : "Inner Exception: " + ex.InnerException.ToString());
cp.Result = TestResult.Fail;
SaveRound(r);
}
}
Output();
}
//Case 1518: 1.1.01.08_OpenObjects_N08_MultipleInstanceId
public void Run_Application_OpenObject_MultipleInstanceId_Case1518()
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "OpenObjectV2");
ApplicationServiceV2 app = new ApplicationServiceV2();
AppOpenObjectsRequestType appRequest = new AppOpenObjectsRequestType();
appRequest.instanceIDList = new string[512];
appRequest.parameters = new ParameterType[512];
int pnum = 0;
int idnum = 0;
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "NA":
switch (ids.InputParameters.GetParameter(i).Key)
{
case "instanceid":
appRequest.instanceIDList[idnum] = ids.InputParameters.GetParameter(i).Value;
idnum++;
break;
case "appType":
switch (ids.InputParameters.GetParameter(i).Value)
{
case "TwoDViewer":
appRequest.application = ApplicationType.TwoDViewer;
break;
case "ThreeDViewer":
appRequest.application = ApplicationType.ThreeDViewer;
break;
case "Cosmetic":
appRequest.application = ApplicationType.Cosmetic;
break;
case "Logicon":
appRequest.application = ApplicationType.Logicon;
break;
case "CSRestore":
appRequest.application = ApplicationType.CSRestore;
break;
case "CSModel":
appRequest.application = ApplicationType.CSModel;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
break;
}
break;
case "parameters":
ParameterType p = new ParameterType();
switch (ids.InputParameters.GetParameter(i).Key)
{
case "configuration":
p.key = KeyType.configuration;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "helpLanguage":
p.key = KeyType.helpLanguage;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
case "language":
p.key = KeyType.language;
p.value = ids.InputParameters.GetParameter(i).Value;
break;
default:
throw new Exception("No a valid enum value:" + ids.InputParameters.GetParameter(i).Key);
}
appRequest.parameters[pnum] = p;
pnum++;
break;
}
}
CheckPoint pOpen = new CheckPoint("Open ObjectV2", "Open Object for " + appRequest.application + " muli-instnaces");
r.CheckPoints.Add(pOpen);
AppOpenObjectsResponseType response = app.openObject(appRequest);
if (!app.LastReturnXMLValidateResult.isValid)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Invalid format", "Response is not complied with XML Schema");
SaveRound(r);
continue;
}
System.Threading.Thread.Sleep(2000);
System.IO.DirectoryInfo d = new System.IO.DirectoryInfo("c:\\csautotest");
System.Collections.ArrayList arguments = new System.Collections.ArrayList();
foreach (System.IO.FileInfo f in d.GetFiles("openObject*.log"))
{
System.IO.StreamReader sr = f.OpenText();
arguments.Add(sr.ReadLine());
sr.Close();
f.Delete();
}
int expect = int.Parse(ids.ExpectedValues.GetParameter("pnum").Value);
if (arguments.Count != expect)
{
pOpen.Result = TestResult.Fail;
pOpen.Outputs.AddParameter("Open ObjectV2", "Fail", "Expert " + expect.ToString() + " processes open, actural:" + arguments.Count.ToString());
SaveRound(r);
continue;
}
else
{
pOpen.Result = TestResult.Pass;
pOpen.Outputs.AddParameter("Open ObjectV2", "Success", "OK");
}
SaveRound(r);
}
Output();
}