public void Run_WorkFlow_3Dv_createCross_link_a3d_Case1686() // //case 1.9.3_WorkFlow_3Dv_createCross_link_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
//for create cross section
XMLParameter crosssection = new XMLParameter("crosssection");
XMLParameter slicesPathList = new XMLParameter("slices_path_list");
XMLParameter slicesPSAnnotationList = new XMLParameter("slices_ps_xml_annotation_list");
XMLParameter slicesPSGeneralList = new XMLParameter("slices_ps_xml_general_list");
XMLParameter slicesPSProcessingList = new XMLParameter("slices_ps_xml_processing_list");
XMLParameter slicesThumbnailList = new XMLParameter("slices_ps_thumbnail_path_list");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "seta3d":
xmlAnalysisInfo.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_crossSection":
crosssection.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_path_list":
slicesPathList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_annotation_list":
slicesPSAnnotationList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_general_list":
slicesPSGeneralList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_xml_processing_list":
slicesPSProcessingList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "create_slices_ps_thumbnail_path_list":
slicesThumbnailList.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: Create Cross Section
CheckPoint cpCreateCSS = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateCSS);
XMLParameterCollection p_createCrossSection = new XMLParameterCollection();
p_createCrossSection.Add(crosssection);
p_createCrossSection.Add(slicesPathList);
p_createCrossSection.Add(slicesPSAnnotationList);
p_createCrossSection.Add(slicesPSGeneralList);
p_createCrossSection.Add(slicesPSProcessingList);
p_createCrossSection.Add(slicesThumbnailList);
CrossSectionService crossSectionSvc = new CrossSectionService();
XMLResult rt_Create = crossSectionSvc.createCrossSection(volumeID, p_createCrossSection);
if (rt_Create.IsErrorOccured)
{
cpCreateCSS.Result = TestResult.Fail;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns error", rt_Create.Message);
SaveRound(r);
break; // There is error, end test case
}
else
{
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns succeess", rt_Create.Message);
//Check the "internal_id" in return is present
bool isInternalIDCorrect = true;
if (rt_Create.SingleResult == null || rt_Create.SingleResult == String.Empty)
{
isInternalIDCorrect = false;
}
if (!isInternalIDCorrect)
{
cpCreateCSS.Result = TestResult.Fail;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns wrong internal_id: ", rt_Create.Message);
SaveRound(r);
break; // There is error, end test case
}
else
{
cpCreateCSS.Result = TestResult.Pass;
cpCreateCSS.Outputs.AddParameter("Create", "Create a new crosssection returns correct internal_id: ", rt_Create.SingleResult);
string crosssectionuid = rt_Create.SingleResult;
CheckPoint cplinkcstoa3d = new CheckPoint("link CrossSection To Analysis3D", "Call linkCrossSectionToAnalysis3D");
r.CheckPoints.Add(cplinkcstoa3d);
//link cs to a3d
XMLResult linkRsl = a3dsrv.linkCrossSectionToAnalysis3D(a3duid, crosssectionuid);
if (linkRsl.IsErrorOccured)
{
cplinkcstoa3d.Result = TestResult.Fail;
cplinkcstoa3d.Outputs.AddParameter("Link Fail", "Link Cross Section to Analysis3D", "Return ERROR");
}
else
{
XMLResult getcsuidfroma3d = a3dsrv.listCrossSectionsOfAnalysis3D(a3duid);
if (!getcsuidfroma3d.IsErrorOccured)
{
if (crosssectionuid == getcsuidfroma3d.SingleResult)
{
cplinkcstoa3d.Result = TestResult.Pass;
cplinkcstoa3d.Outputs.AddParameter("Link Success", "Link Cross Section to Analysis3D", "Return Cross Section is matched with link");
}
}
}
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createA3D_Case1688() // //case 1.9.2_WorkFlow_3Dv_createA3D
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
string criteriaOfAnalysis = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
if (ids.InputParameters.GetParameter(i).Step == "Analyses3D")
{
if (ids.InputParameters.GetParameter(i).Key == "criteria")
{
criteriaOfAnalysis = ids.InputParameters.GetParameter(i).Value;
}
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: listAnalyses3DOfVolume
CheckPoint cpGetA3dofVolume = new CheckPoint("Get Analysis3D from volume", "Call listAnalyses3DOfVolume");
r.CheckPoints.Add(cpGetA3dofVolume);
XMLResult geta3dfromvolume = volumesrv.listAnalyses3DOfVolume(volumeID, criteriaOfAnalysis);
if (geta3dfromvolume.IsErrorOccured)
{
cpGetA3dofVolume.Result = TestResult.Fail;
cpGetA3dofVolume.Outputs.AddParameter("Get Analysis3D from volume", "Call listAnalyses3DOfVolume", geta3dfromvolume.Message);
SaveRound(r);
continue;
}
else
{
if (a3duid == geta3dfromvolume.SingleResult)
{
cpGetA3dofVolume.Result = TestResult.Pass;
cpGetA3dofVolume.Outputs.AddParameter("Get Analysis3D from volume", "Call listAnalyses3DOfVolume", geta3dfromvolume.ResultContent);
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}
public void Run_WorkFlow_3Dv_createVolume_with_created_and_set_a3d_Case1660() // //case 1.9.1_WorkFlow_3Dv_createVolume_with_created_and_set_a3d
{
int runCount = 0;
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), ids.Description);
try
{
#region Parameter initialize
string volumeID = "";
//for create volume
XMLParameter cSeriesData = new XMLParameter("series");
XMLParameter cVolumeData = new XMLParameter("volume");
XMLParameter cSlicePathData = new XMLParameter("slices_path_list");
//for create study
XMLParameter studyPara = new XMLParameter("request");
XMLParameter xmlAnalysisInfo = new XMLParameter("analysis3d");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "series":
cSeriesData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "volume":
cVolumeData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "slices_path_list":
cSlicePathData.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value, false);
break;
case "study":
studyPara.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "seta3d":
xmlAnalysisInfo.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
}
}
#endregion
#region Step 0: Create Study
string studyUID = string.Empty;
StudyService stusrv = new StudyService();
XMLResult stuRsl = stusrv.createStudy(studyPara);
if (stuRsl.IsErrorOccured)
{
continue;
}
else
{
studyUID = stuRsl.SingleResult;
}
#endregion
#region Step 1: Create Volume
CheckPoint cpCreateVolume = new CheckPoint("Create Volume Info", "Call createVolume");
r.CheckPoints.Add(cpCreateVolume);
XMLParameterCollection cInputData = new XMLParameterCollection();
cInputData.Add(cSeriesData);
cInputData.Add(cVolumeData);
cInputData.Add(cSlicePathData);
VolumeService volumesrv = new VolumeService();
XMLResult rslCreate = volumesrv.createVolume(studyUID, cInputData);
if (rslCreate.IsErrorOccured)
{
cpCreateVolume.Result = TestResult.Fail;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.Message);
SaveRound(r);
continue;
}
else
{
cpCreateVolume.Result = TestResult.Pass;
cpCreateVolume.Outputs.AddParameter("Create Volume Info", "Call createVolume", rslCreate.ResultContent);
volumeID = rslCreate.SingleResult;
}
#endregion
#region Step 2: Create Analysis3D
CheckPoint cpCreateA3d = new CheckPoint("Create Analysis3D", "Call createAnalysis3D");
r.CheckPoints.Add(cpCreateA3d);
Analysis3DService a3dsrv = new Analysis3DService();
XMLParameter a3dpara = new XMLParameter("analysis3d");
a3dpara.AddParameter("analysis3D_xml", "analysis3D_xml");
XMLResult a3dcreateRsl = a3dsrv.createAnalysis3D(volumeID, a3dpara);
string a3duid = "";
if (a3dcreateRsl.IsErrorOccured)
{
cpCreateA3d.Result = TestResult.Fail;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.Message);
SaveRound(r);
continue;
}
else
{
cpCreateA3d.Result = TestResult.Pass;
cpCreateA3d.Outputs.AddParameter("Create Analysis3D", "Call createAnalysis3D", a3dcreateRsl.ResultContent);
a3duid = a3dcreateRsl.SingleResult;
}
#endregion
#region Step 3: Set Analysis3D
CheckPoint cpSetA3d = new CheckPoint("Set Analysis3D", "Call setAnalysis3DInfo");
r.CheckPoints.Add(cpSetA3d);
XMLResult seta3dRsl = a3dsrv.setAnalysis3DInfo(a3duid, xmlAnalysisInfo);
if (seta3dRsl.IsErrorOccured)
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.Message);
SaveRound(r);
continue;
}
else
{
XMLResult geta3dRsl = a3dsrv.getAnalysis3DInfo(a3duid);
int matchCount = 0;
for (int j = 0; j < geta3dRsl.MultiResults[0].Length; j++)
{
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "name"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "modified analysis 3d")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "comments"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "set with some modification")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "current"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "true")
{
matchCount++;
}
if (geta3dRsl.MultiResults[0].Parameters[j].ParameterName == "object_creation_date"
&& geta3dRsl.MultiResults[0].Parameters[j].ParameterValue == "2012-12-05T15:25:00+08:00")
{
matchCount++;
}
}
if (matchCount == 4)
{
cpSetA3d.Result = TestResult.Pass;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", seta3dRsl.ResultContent);
}
else
{
cpSetA3d.Result = TestResult.Fail;
cpSetA3d.Outputs.AddParameter("Set Analysis3D", "Call setAnalysis3DInfo", "The set value is not equal with get");
}
}
#endregion
SaveRound(r);
}
catch (Exception ex)
{
CheckPoint cp = new CheckPoint();
r.CheckPoints.Add(cp);
cp.Result = TestResult.Fail;
cp.Outputs.AddParameter("Exception thrown", "Exception Message", ex.Message);
SaveRound(r);
}
}
Output();
}