public void DrawBasicSquareWithExtraAttributes()
{
Point canvasCoordinate = inkCanvas.Coordinates.LocationInViewport;
Size squareSize = new Size(inkCanvas.Size.Width * 3 / 5, inkCanvas.Size.Height * 3 / 5);
Point A = new Point(canvasCoordinate.X + inkCanvas.Size.Width / 5, canvasCoordinate.Y + inkCanvas.Size.Height / 5);
// A B
// ┌──────┐ Draw a basic ABCD square using Pen through the Actions API
// │ │ in pointer origin mode:
// │ │ - X is relative to the previous X position in this session
// └──────┘ - Y is relative to the previous Y position in this session
// D C
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
ActionSequence sequence = new ActionSequence(penDevice, 0);
PenInfo penExtraAttributes = new PenInfo {
TiltX = 45, TiltY = 45, Twist = 45
};
// Draw line AB from point A to B with attributes defined in penExtraAttributes
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact, penExtraAttributes));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, squareSize.Width, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line BC from point B to C and apply maximum (0.9f) pressure as the pen draw between the points
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, 0, squareSize.Height, TimeSpan.Zero, new PenInfo {
Pressure = 0.9f
}));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line CD from point C to D and keep the maximum pressure by not changing the pressure attribute
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, -squareSize.Width, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line DA from point D to A and reduce the pressure to minimum (0.1f) as the pen draw between the points
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, 0, -squareSize.Height, TimeSpan.Zero, new PenInfo {
Pressure = 0.1f
}));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
newStickyNoteSession.PerformActions(new List <ActionSequence> {
sequence
});
try
{
var result = newStickyNoteSession.FindElementByAccessibilityId("RichEditBox");
Assert.Fail("RichEditBox should not be defined anymore after a pen input is successfully performed.");
}
catch { }
}
public void TapTest2()
{
//process ID
Activate(3316);
// Draw a circle with radius 300 and 40 (x, y) points
const int radius = 300;
const int points = 40;
// Draw the circle with a single touch actions
PointerInputDevice touchContact = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
//touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, 0, -radius, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerMove(paintCanvas, 0, -radius, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 0, 0, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
//touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
//for (double angle = 0; angle <= 2 * Math.PI; angle += 2 * Math.PI / points)
//{
// //touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, (int)(Math.Sin(angle) * radius), -(int)(Math.Cos(angle) * radius), TimeSpan.Zero));
// touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, (int)(Math.Sin(angle) * radius), -(int)(Math.Cos(angle) * radius), TimeSpan.Zero));
// //touchSequence.AddAction(touchContact.CreatePointerMove(paintCanvas, 0, -radius, TimeSpan.Zero));
//}
//touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 1, 1, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 400, 400, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
//touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
//touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 400, 400, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
//touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
//touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 400, 400, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
List <ActionSequence> actionList = new List <ActionSequence> {
touchSequence
};
for (int i = 0; i < actionList.Count; i++)
{
Console.WriteLine(actionList[i].ToString());
}
session.PerformActions(actionList);
}
public void DrawWithPen()
{
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
// Draw rectangle ABCD (consisting of AB, BC, CD, and DA lines)
ActionSequence sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(inkCanvas, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(inkCanvas, B.X, B.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerMove(inkCanvas, C.X, C.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerMove(inkCanvas, D.X, D.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerMove(inkCanvas, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
// Fill the rectangle ABCD at the middle of the crosshair position (Point E)
brushesPane.FindElementByAccessibilityId("FillBucket").Click();
ActionSequence fillSequence = new ActionSequence(penDevice, 0);
fillSequence.AddAction(penDevice.CreatePointerMove(inkCanvas, E.X, E.Y, TimeSpan.Zero));
fillSequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
fillSequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
fillSequence
});
// Erase by pressing PenEraser button along Point E X-Axis and Y-Axis to make the crosshair
ActionSequence eraseSequence = new ActionSequence(penDevice, 0);
eraseSequence.AddAction(penDevice.CreatePointerMove(inkCanvas, A.X - 5, E.Y, TimeSpan.Zero));
eraseSequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenEraser));
eraseSequence.AddAction(penDevice.CreatePointerMove(inkCanvas, B.X + 5, E.Y, TimeSpan.FromSeconds(.5)));
eraseSequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenEraser));
eraseSequence.AddAction(penDevice.CreatePointerMove(inkCanvas, E.X, C.Y, TimeSpan.Zero));
eraseSequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenEraser));
eraseSequence.AddAction(penDevice.CreatePointerMove(inkCanvas, E.X, B.Y, TimeSpan.FromSeconds(.5)));
eraseSequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenEraser));
session.PerformActions(new List <ActionSequence> {
eraseSequence
});
// Verify that the drawing operations took place
Assert.IsTrue(undoButton.Displayed);
Assert.IsTrue(undoButton.Enabled);
}
public void Pen_Scroll_Horizontal()
{
// Different Alarm & Clock application version uses different UI elements
if (AlarmTabClassName == "ListViewItem")
{
// The latest Alarms & Clock application no longer has horizontal scroll UI elements
}
else
{
WindowsElement homePagePivot = session.FindElementByAccessibilityId("HomePagePivot");
WindowsElement alarmPivotItem = session.FindElementByAccessibilityId(AlarmTabAutomationId);
WindowsElement worldClockPivotItem = session.FindElementByAccessibilityId(WorldClockTabAutomationId);
Assert.IsNotNull(homePagePivot);
Assert.IsNotNull(alarmPivotItem);
Assert.IsNotNull(worldClockPivotItem);
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
// Perform scroll left pen action to switch from Alarm to WorldClock tab
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
ActionSequence sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(homePagePivot, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(homePagePivot, -session.Manage().Window.Size.Width / 2, 0, TimeSpan.FromSeconds(.5)));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(alarmPivotItem.Selected);
Assert.IsTrue(worldClockPivotItem.Selected);
// Perform scroll right pen action to switch back from WorldClock to Alarm tab
sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(homePagePivot, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(homePagePivot, session.Manage().Window.Size.Width / 2, 0, TimeSpan.FromSeconds(.5)));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
}
}
public void TapTest()
{
PointerInputDevice touch = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touch, 0);
touchSequence.AddAction(touch.CreatePointerMove(zoomInteractor, 0, 0, TimeSpan.Zero));
touchSequence.AddAction(touch.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerUp(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
touchSequence
});
Assert.IsTrue(true);
}
public void ZoomingOutMultiTouchWithInterpolation()
{
// Set pointer move Duration to 300 ms to implicitly generate 6 interpolation moves that are performed every 50 ms
TimeSpan moveDuration = TimeSpan.FromMilliseconds(300);
// Drag a touch contact diagonally in SW direction approaching the other contact point
PointerInputDevice touch1 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch1Sequence = new ActionSequence(touch1, 0);
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 50, -50, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerDown(PointerButton.TouchContact));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 20, -20, moveDuration));
touch1Sequence.AddAction(touch1.CreatePointerUp(PointerButton.TouchContact));
// Drag a touch contact diagonally in NE direction approaching the other contact point
PointerInputDevice touch2 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch2Sequence = new ActionSequence(touch2, 0);
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -50, 50, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerDown(PointerButton.TouchContact));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -20, 20, moveDuration));
touch2Sequence.AddAction(touch2.CreatePointerUp(PointerButton.TouchContact));
// Perform the 2 fingers zoom out (pinch) multi-touch sequences defined above
session.PerformActions(new List <ActionSequence> {
touch1Sequence, touch2Sequence
});
// Ensure that the zoom level now is less than 100%
Assert.IsTrue(int.Parse(zoomScaleTextBox.Text) < 100);
}
private void Tap(int xOffset, int yOffset)
{
System.Threading.Thread.Sleep(100);
//the screenshot can take the place of sleeping instead
Console.WriteLine("Tap start");
PointerInputDevice touch = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touch, 0);
touchSequence.AddAction(touch.CreatePointerMove(CoordinateOrigin.Pointer, xOffset, yOffset, TimeSpan.Zero));
touchSequence.AddAction(touch.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerUp(PointerButton.TouchContact));
List <ActionSequence> actions = new List <ActionSequence> {
touchSequence
};
session.PerformActions(actions);
if (record)
{
String eventFolder = installDirectory + "\\" + currentEventName;
String filename = eventFolder + "\\" + currentEventName + "_" + currentEventTapCount + ".png";
currentEventTapCount++;
Bitmap bmp = imageComparer.ScreenshotLockBits(width, height);
bmp.Save(filename, ImageFormat.Png);
bmp.Dispose();//doesn't work?
}
Console.WriteLine("Echo: " + actions[actions.Count - 1].ToString());
Console.WriteLine("Tap end");
}
public void Touch_Flick()
{
// Navigate to add alarm page
session.FindElementByAccessibilityId("AddAlarmButton").Click();
session.FindElementByAccessibilityId("AlarmTimePicker").Click();
Thread.Sleep(TimeSpan.FromSeconds(1));
WindowsElement minuteSelector = session.FindElementByAccessibilityId("MinuteLoopingSelector");
WindowsElement minute00 = session.FindElementByName("00");
Assert.IsNotNull(minuteSelector);
Assert.IsNotNull(minute00);
Assert.IsTrue(minute00.Displayed);
// Perform touch flick down action to scroll the minute hiding 00 minutes that was shown
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(minuteSelector, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerMove(minuteSelector, 0, 500, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(2));
Assert.IsFalse(minute00.Displayed);
}
public void DrawConcentricSquaresWithVaryingDuration()
{
const int concentricSquareCount = 8; // Paint application only supports up to 10 touch inputs
List <ActionSequence> actionSequencesList = new List <ActionSequence>();
// Draw N concentric rectangles with varying speed defined by the duration specified in durationMs
for (int i = 0, radius = defaultRadius, durationMs = 1000; i < concentricSquareCount && radius > 0; i++, radius -= radiusOffset)
{
OpenQA.Selenium.Appium.Interactions.PointerInputDevice touchContact = new OpenQA.Selenium.Appium.Interactions.PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, -radius, -radius, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, radius, -radius, TimeSpan.FromMilliseconds(durationMs)));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, radius, radius, TimeSpan.FromMilliseconds(durationMs)));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, -radius, radius, TimeSpan.FromMilliseconds(durationMs)));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, -radius, -radius, TimeSpan.FromMilliseconds(durationMs)));
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
actionSequencesList.Add(touchSequence);
durationMs += 300;
}
ourSession.PerformActions(actionSequencesList);
// Verify that the drawing operations took place
Assert.IsTrue(undoButton.Displayed);
Assert.IsTrue(undoButton.Enabled);
}
public void Touch_LongClick()
{
// Create a new test alarm
string alarmName = "LongTapTest";
DeletePreviouslyCreatedAlarmEntry(alarmName);
AddAlarmEntry(alarmName);
Thread.Sleep(TimeSpan.FromSeconds(3));
var alarmEntries = session.FindElementsByXPath($"//ListItem[starts-with(@Name, \"{alarmName}\")]");
Assert.IsNotNull(alarmEntries);
Assert.AreEqual(1, alarmEntries.Count);
// Open a the context menu on the alarm entry using long tap (press and hold) action and click delete
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(alarmEntries[0], 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerMove(alarmEntries[0], 0, 0, TimeSpan.FromSeconds(3)));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
session.FindElementByName("Delete").Click();
Thread.Sleep(TimeSpan.FromSeconds(1));
alarmEntries = session.FindElementsByXPath($"//ListItem[starts-with(@Name, \"{alarmName}\")]");
Assert.IsNotNull(alarmEntries);
Assert.AreEqual(0, alarmEntries.Count);
}
private void Tap(int xOffset, int yOffset)
{
System.Threading.Thread.Sleep(100);
//the screenshot can take the place of sleeping instead
Console.WriteLine("Tap start");
PointerInputDevice touch = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touch, 0);
touchSequence.AddAction(touch.CreatePointerMove(CoordinateOrigin.Pointer, xOffset, yOffset, TimeSpan.Zero));
touchSequence.AddAction(touch.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerUp(PointerButton.TouchContact));
List <ActionSequence> actions = new List <ActionSequence> {
touchSequence
};
session.PerformActions(actions);
////String filename = "Tap_" + System.DateTime.Now.ToString("yyyymmdd-HHmm-ssfff") + "_" + xOffset + "_" + yOffset + ".png";
////Bitmap bmp = imageComparer.ScreenshotLockBits(width, height);
////bmp.Save(filename, System.Drawing.Imaging.ImageFormat.Png);
Console.WriteLine("Echo: " + actions[actions.Count - 1].ToString());
Console.WriteLine("Tap end");
}
public static void DrawCircle(WindowsDriver <WindowsElement> session)
{
// Draw a circle with radius 300 and 40 (x, y) points
const int radius = 300;
const int points = 40;
// Select the Brushes toolbox to have the Brushes Pane sidebar displayed and ensure that Marker is selected
session.FindElementByAccessibilityId("Toolbox").FindElementByAccessibilityId("TopBar_ArtTools").Click();
session.FindElementByAccessibilityId("SidebarWrapper").FindElementByAccessibilityId("Marker3d").Click();
// Locate the drawing surface
WindowsElement inkCanvas = session.FindElementByAccessibilityId("InteractorFocusWrapper");
// Draw the circle with a single touch actions
OpenQA.Selenium.Appium.Interactions.PointerInputDevice touchContact = new OpenQA.Selenium.Appium.Interactions.PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, 0, -radius, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
for (double angle = 0; angle <= 2 * Math.PI; angle += 2 * Math.PI / points)
{
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, (int)(Math.Sin(angle) * radius), -(int)(Math.Cos(angle) * radius), TimeSpan.Zero));
}
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
touchSequence
});
// Verify that the drawing operations took place
WindowsElement undoButton = session.FindElementByAccessibilityId("UndoIcon");
}
public void Touch_DragAndDrop()
{
WindowsElement appNameTitle = FindAppTitleBar();
const int offset = 100;
// Save application window original position
Point originalPosition = session.Manage().Window.Position;
Assert.IsNotNull(originalPosition);
// Send touch down, move, and up actions combination to perform a drag and drop
// action on the app title bar. These actions reposition the application window.
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(appNameTitle, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerMove(CoordinateOrigin.Pointer, offset, offset, TimeSpan.FromSeconds(1)));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
// Verify that application window is now re-positioned from the original location
Assert.AreNotEqual(originalPosition, session.Manage().Window.Position);
Assert.IsTrue(originalPosition.Y < session.Manage().Window.Position.Y);
// Restore application window original position
session.Manage().Window.Position = originalPosition;
Assert.AreEqual(originalPosition, session.Manage().Window.Position);
}
public void DrawBasicSquare()
{
Point canvasCoordinate = inkCanvas.Coordinates.LocationInViewport;
Size squareSize = new Size(inkCanvas.Size.Width * 3 / 5, inkCanvas.Size.Height * 3 / 5);
Point A = new Point(canvasCoordinate.X + inkCanvas.Size.Width / 5, canvasCoordinate.Y + inkCanvas.Size.Height / 5);
// A B
// ┌──────┐ Draw a basic ABCD square using Pen through the Actions API
// │ │ in viewport(default) origin mode:
// │ │ - X is absolute horizontal position in the session window
// └──────┘ - Y is absolute vertical position in the session window
// D C
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
ActionSequence sequence = new ActionSequence(penDevice, 0);
// Draw line AB from point A to B
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X + squareSize.Width, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line BC from point B to C
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X + squareSize.Width, A.Y + squareSize.Height, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line CD from point C to D
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y + squareSize.Height, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line DA from point D to A
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
newStickyNoteSession.PerformActions(new List <ActionSequence> {
sequence
});
try
{
var result = newStickyNoteSession.FindElementByAccessibilityId("RichEditBox");
Assert.Fail("RichEditBox should not be defined anymore after a pen input is successfully performed.");
}
catch { }
}
public void Touch_DoubleClick()
{
WindowsElement appNameTitle = FindAppTitleBar();
WindowsElement maximizeButton = session.FindElementByAccessibilityId("Maximize");
// Set focus on the application by switching window to itself
session.SwitchTo().Window(session.CurrentWindowHandle);
// Restore the application window if it is currently maximized
if (!maximizeButton.Text.Contains("Maximize"))
{
maximizeButton.Click();
}
// Verify that window is currently not maximized
Assert.IsTrue(maximizeButton.Text.Contains("Maximize"));
// Perform touch double click action on the title bar to maximize the application window
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(appNameTitle, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(maximizeButton.Text.Contains("Maximize"));
// Perform touch double click action on the title bar to restore the application window
sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(appNameTitle, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(maximizeButton.Text.Contains("Maximize"));
}
public void Touch_Click_OriginPointer()
{
WindowsElement alarmPivotItem = session.FindElementByAccessibilityId("AlarmPivotItem");
WindowsElement worldClockPivotItem = session.FindElementByAccessibilityId("WorldClockPivotItem");
int relativeX = 0; // Initial x coordinate
int relativeY = 0; // Initial y coordinate
Assert.IsNotNull(alarmPivotItem);
Assert.IsNotNull(worldClockPivotItem);
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
// Perform touch click action using pointer coordinate origin to switch from Alarm to WorldClock tab
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
relativeX = worldClockPivotItem.Location.X - relativeX;
relativeY = worldClockPivotItem.Location.Y - relativeY;
sequence.AddAction(touchDevice.CreatePointerMove(CoordinateOrigin.Pointer, relativeX, relativeY, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(alarmPivotItem.Selected);
Assert.IsTrue(worldClockPivotItem.Selected);
// Perform touch click action using pointer coordinate origin to switch from WorldClock to Alarm tab
sequence = new ActionSequence(touchDevice, 0);
relativeX = alarmPivotItem.Location.X - relativeX;
relativeY = alarmPivotItem.Location.Y - relativeY;
sequence.AddAction(touchDevice.CreatePointerMove(CoordinateOrigin.Pointer, relativeX, relativeY, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
}
public static void DrawRectangle(WindowsDriver <WindowsElement> session)
{
OpenQA.Selenium.Appium.Interactions.PointerInputDevice penDevice = new OpenQA.Selenium.Appium.Interactions.PointerInputDevice(PointerKind.Pen);
// Select the Brushes toolbox to have the Brushes Pane sidebar displayed and ensure that Marker is selected
session.FindElementByAccessibilityId("Toolbox").FindElementByAccessibilityId("TopBar_ArtTools").Click();
session.FindElementByAccessibilityId("SidebarWrapper").FindElementByAccessibilityId("PixelPencil3d").Click();
// Locate the drawing surface
WindowsElement inkCanvas = session.FindElementByAccessibilityId("InteractorFocusWrapper");
Point canvasCoordinate = inkCanvas.Coordinates.LocationInViewport;
Size squareSize = new Size(inkCanvas.Size.Width * 3 / 5, inkCanvas.Size.Height * 3 / 5);
Point A = new Point(canvasCoordinate.X + inkCanvas.Size.Width / 5, canvasCoordinate.Y + inkCanvas.Size.Height / 5);
TimeSpan howFast = TimeSpan.FromMilliseconds(300.0);
ActionSequence sequence = new ActionSequence(penDevice, 0);
// Draw line AB from point A to B
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X + squareSize.Width, A.Y, howFast));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line BC from point B to C
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X + squareSize.Width, A.Y + squareSize.Height, howFast));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line CD from point C to D
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y + squareSize.Height, howFast));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
// Draw line DA from point D to A
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Viewport, A.X, A.Y, howFast));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
}
public void Touch_Click_OriginViewport()
{
WindowsElement alarmPivotItem = session.FindElementByAccessibilityId("AlarmPivotItem");
WindowsElement worldClockPivotItem = session.FindElementByAccessibilityId("WorldClockPivotItem");
int x = worldClockPivotItem.Location.X; // x coordinate of UI element relative to application window
int y = worldClockPivotItem.Location.Y; // y coordinate of UI element relative to application window
Assert.IsNotNull(alarmPivotItem);
Assert.IsNotNull(worldClockPivotItem);
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
// Perform touch click action using viewport coordinate origin to switch from Alarm to WorldClock tab
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(CoordinateOrigin.Viewport, x, y, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(alarmPivotItem.Selected);
Assert.IsTrue(worldClockPivotItem.Selected);
// Perform touch click action using viewport coordinate origin to switch from WorldClock to Alarm tab
sequence = new ActionSequence(touchDevice, 0);
x = alarmPivotItem.Location.X;
y = alarmPivotItem.Location.Y;
sequence.AddAction(touchDevice.CreatePointerMove(CoordinateOrigin.Viewport, x, y, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
}
public void Touch_Scroll_Horizontal()
{
WindowsElement homePagePivot = session.FindElementByAccessibilityId("HomePagePivot");
WindowsElement alarmPivotItem = session.FindElementByAccessibilityId("AlarmPivotItem");
WindowsElement worldClockPivotItem = session.FindElementByAccessibilityId("WorldClockPivotItem");
Assert.IsNotNull(homePagePivot);
Assert.IsNotNull(alarmPivotItem);
Assert.IsNotNull(worldClockPivotItem);
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
// Perform scroll left touch action to switch from Alarm to WorldClock tab
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(homePagePivot, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerMove(homePagePivot, -session.Manage().Window.Size.Width / 2, 0, TimeSpan.FromSeconds(.5)));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(alarmPivotItem.Selected);
Assert.IsTrue(worldClockPivotItem.Selected);
// Perform scroll right touch action to switch back from WorldClock to Alarm tab
sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(homePagePivot, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerMove(homePagePivot, session.Manage().Window.Size.Width / 2, 0, TimeSpan.FromSeconds(.5)));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
}
private void Tap(int xOffset, int yOffset)
{
PointerInputDevice touch = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touch, 0);
touchSequence.AddAction(touch.CreatePointerMove(zoomInteractor, xOffset, yOffset, TimeSpan.Zero));
touchSequence.AddAction(touch.CreatePointerDown(PointerButton.TouchContact));
touchSequence.AddAction(touch.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
touchSequence
});
}
public void Pen_Scroll_Vertical()
{
// Navigate to add alarm page
session.FindElementByAccessibilityId("AddAlarmButton").Click();
session.FindElementByAccessibilityId("AlarmTimePicker").Click();
Thread.Sleep(TimeSpan.FromSeconds(1));
WindowsElement minuteSelector = session.FindElementByAccessibilityId("MinuteLoopingSelector");
WindowsElement minute00 = session.FindElementByName("00");
Assert.IsNotNull(minuteSelector);
Assert.IsNotNull(minute00);
Assert.IsTrue(minute00.Displayed);
// Perform scroll down pen action to scroll the minute hiding 00 minutes that was shown
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
ActionSequence sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(minuteSelector, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(minuteSelector, 0, -200, TimeSpan.FromSeconds(.5)));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(minute00.Displayed);
// Perform scroll up pen action to scroll the the minute back showing 00 minutes that was hidden
sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(minuteSelector, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
sequence.AddAction(penDevice.CreatePointerMove(minuteSelector, 0, 200, TimeSpan.FromSeconds(.5)));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(minute00.Displayed);
}
private void ActionsLaunch(String type)
{
int Y = 300;
if (type.Contains("cmd"))
{
Y = 100;
}
else if (type.Contains("About"))
{
Y = 300;
}
else
{
Y = 650;
}
WindowsElement plusTab = session.FindElementByAccessibilityId("Console Window");
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(penDevice, 0);
ActionSequence sequence2 = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerMove(plusTab, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, 0, 0, TimeSpan.Zero));
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(2000);
sequence2.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, 0, Y, TimeSpan.Zero));
sequence2.AddAction(penDevice.CreatePointerDown(PointerButton.TouchContact));
sequence2.AddAction(penDevice.CreatePointerMove(CoordinateOrigin.Pointer, 0, 1, TimeSpan.FromMilliseconds(50)));
sequence2.AddAction(penDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence2
});
}
public void Touch_Click_OriginElement()
{
var alarmPivotItem = session.FindElementByAccessibilityId("AlarmPivotItem");
var worldClockPivotItem = session.FindElementByAccessibilityId("WorldClockPivotItem");
Assert.IsNotNull(alarmPivotItem);
Assert.IsNotNull(worldClockPivotItem);
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
// Perform touch click action using element coordinate origin to switch from Alarm to WorldClock tab
PointerInputDevice touchDevice = new PointerInputDevice(PointerKind.Touch);
ActionSequence sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(worldClockPivotItem, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsFalse(alarmPivotItem.Selected);
Assert.IsTrue(worldClockPivotItem.Selected);
// Perform touch click action using element coordinate origin to switch from WorldClock to Alarm tab
sequence = new ActionSequence(touchDevice, 0);
sequence.AddAction(touchDevice.CreatePointerMove(alarmPivotItem, 0, 0, TimeSpan.Zero));
sequence.AddAction(touchDevice.CreatePointerDown(PointerButton.TouchContact));
sequence.AddAction(touchDevice.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
sequence
});
Thread.Sleep(TimeSpan.FromSeconds(1));
Assert.IsTrue(alarmPivotItem.Selected);
Assert.IsFalse(worldClockPivotItem.Selected);
}
public void ActionsError_BadPointerButton_PointerUp()
{
try
{
// Perform pen up action using a bad button value
PointerInputDevice penDevice = new PointerInputDevice(PointerKind.Pen);
ActionSequence sequence = new ActionSequence(penDevice, 0);
sequence.AddAction(penDevice.CreatePointerUp((PointerButton)(-1)));
session.PerformActions(new List <ActionSequence> {
sequence
});
Assert.Fail("Exception should have been thrown");
}
catch (InvalidOperationException exception)
{
Assert.AreEqual(ErrorStrings.ActionsArgumentButton, exception.Message);
}
}
public void DrawCircle(PointerInputDevice penDevice, ActionSequence sequence, int centerX, int centerY, int radius, int stepSize)
{
sequence.AddAction(penDevice.CreatePointerMove(
CoordinateOrigin.Viewport,
centerX + radius,
centerY,
TimeSpan.Zero
));
sequence.AddAction(penDevice.CreatePointerDown(PointerButton.PenContact));
for (int i = 0; i <= stepSize; i++)
{
sequence.AddAction(penDevice.CreatePointerMove(
CoordinateOrigin.Viewport,
Convert.ToInt32(centerX + radius * Math.Cos(2 * Math.PI * i / stepSize)),
Convert.ToInt32(centerY + radius * Math.Sin(2 * Math.PI * i / stepSize)),
TimeSpan.Zero
));
}
sequence.AddAction(penDevice.CreatePointerUp(PointerButton.PenContact));
}
private void DrawCircle()
{
// Draw a circle with radius 300 and 40 (x, y) points
const int radius = 300;
const int points = 40;
// Select the Brushes toolbox to have the Brushes Pane sidebar displayed and ensure that Marker is selected
session.FindElementByAccessibilityId("Toolbox").FindElementByAccessibilityId("TopBar_ArtTools").Click();
session.FindElementByAccessibilityId("SidebarWrapper").FindElementByAccessibilityId("Marker3d").Click();
// Locate the drawing surface
WindowsElement inkCanvas = session.FindElementByAccessibilityId("InteractorFocusWrapper");
//WindowsElement paintCanvas = session.FindElementByClassName("Afx:00007FF6908E0000:8");
// Draw the circle with a single touch actions
PointerInputDevice touchContact = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
//touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, 0, -radius, TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerMove(paintCanvas, 0, -radius, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, 0, -radius, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
for (double angle = 0; angle <= 2 * Math.PI; angle += 2 * Math.PI / points)
{
//touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, (int)(Math.Sin(angle) * radius), -(int)(Math.Cos(angle) * radius), TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerMove(CoordinateOrigin.Viewport, (int)(Math.Sin(angle) * radius), -(int)(Math.Cos(angle) * radius), TimeSpan.Zero));
//touchSequence.AddAction(touchContact.CreatePointerMove(paintCanvas, 0, -radius, TimeSpan.Zero));
}
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
session.PerformActions(new List <ActionSequence> {
touchSequence
});
// Verify that the drawing operations took place
WindowsElement undoButton = session.FindElementByAccessibilityId("UndoIcon");
Assert.IsTrue(undoButton.Displayed);
Assert.IsTrue(undoButton.Enabled);
}
public void DrawFlower()
{
const int LinesCount = 10; // Paint application only supports up to 10 touch inputs
List <ActionSequence> actionSequencesList = new List <ActionSequence>();
// Draw N petals shape graph to create a flower like shape
double angle = 0;
for (int line = 0; line < LinesCount; line++)
{
OpenQA.Selenium.Appium.Interactions.PointerInputDevice touchContact = new OpenQA.Selenium.Appium.Interactions.PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
int radius = 0;
int x = (int)(Math.Sin(angle) * (defaultRadius * Math.Cos(radius * 2 * Math.PI / 360)));
int y = (int)(Math.Cos(angle) * (defaultRadius * Math.Cos(radius * 2 * Math.PI / 360)));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, x, -y, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
double subAngle = angle;
while (radius < defaultRadius)
{
x = (int)(Math.Sin(subAngle) * (defaultRadius * Math.Cos(radius * 2 * Math.PI / 360)));
y = (int)(Math.Cos(subAngle) * (defaultRadius * Math.Cos(radius * 2 * Math.PI / 360)));
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, x, -y, TimeSpan.Zero));
radius += 5;
subAngle += 2 * Math.PI / 360;
}
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
actionSequencesList.Add(touchSequence);
angle += 2 * Math.PI / LinesCount;
}
ourSession.PerformActions(actionSequencesList);
// Verify that the drawing operations took place
Assert.IsTrue(undoButton.Displayed);
Assert.IsTrue(undoButton.Enabled);
}
public void DrawTwistingHurricane()
{
const int LinesCount = 10; // Paint application only supports up to 10 touch inputs
List <ActionSequence> actionSequencesList = new List <ActionSequence>();
// Draw N lines following a twisting & rotating radial pattern ressembling a hurricane eye
double angle = 0;
for (int line = 0; line < LinesCount; line++)
{
PointerInputDevice touchContact = new PointerInputDevice(PointerKind.Touch);
ActionSequence touchSequence = new ActionSequence(touchContact, 0);
int radius = 100;
int x = (int)(Math.Sin(angle) * radius);
int y = (int)(Math.Cos(angle) * radius);
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, x, -y, TimeSpan.Zero));
touchSequence.AddAction(touchContact.CreatePointerDown(PointerButton.TouchContact));
double subAngle = angle;
while (radius < defaultRadius)
{
x = (int)(Math.Sin(subAngle) * radius);
y = (int)(Math.Cos(subAngle) * radius);
touchSequence.AddAction(touchContact.CreatePointerMove(inkCanvas, x, -y, TimeSpan.Zero));
radius += 5;
subAngle += 2 * Math.PI / 36;
}
touchSequence.AddAction(touchContact.CreatePointerUp(PointerButton.TouchContact));
actionSequencesList.Add(touchSequence);
angle += Math.PI / LinesCount;
}
session.PerformActions(actionSequencesList);
// Verify that the drawing operations took place
Assert.IsTrue(undoButton.Displayed);
Assert.IsTrue(undoButton.Enabled);
}
public void ZoomingInMultiTouch()
{
// Drag a touch contact diagonally in NE direction distancing apart from the other contact point
PointerInputDevice touch1 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch1Sequence = new ActionSequence(touch1, 0);
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 50, -50, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerDown(PointerButton.TouchContact));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 55, -55, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 60, -60, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 65, -65, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 70, -70, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 75, -75, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 80, -80, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerUp(PointerButton.TouchContact));
// Drag a touch contact diagonally in SW direction distancing apart from the other contact point
PointerInputDevice touch2 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch2Sequence = new ActionSequence(touch2, 0);
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -50, 50, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerDown(PointerButton.TouchContact));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -55, 55, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -60, 60, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -65, 65, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -70, 70, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -75, 75, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -80, 80, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerUp(PointerButton.TouchContact));
// Perform the 2 fingers zoom in (expand) multi-touch sequences defined above
session.PerformActions(new List <ActionSequence> {
touch1Sequence, touch2Sequence
});
// Ensure that the zoom level now is greater than 100%
Assert.IsTrue(int.Parse(zoomScaleTextBox.Text) > 100);
}
public void ZoomingOutMultiTouch()
{
// Drag a touch contact diagonally in SW direction approaching the other contact point
PointerInputDevice touch1 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch1Sequence = new ActionSequence(touch1, 0);
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 50, -50, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerDown(PointerButton.TouchContact));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 45, -45, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 40, -40, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 35, -35, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 30, -30, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 25, -25, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerMove(zoomInteractor, 20, -20, TimeSpan.Zero));
touch1Sequence.AddAction(touch1.CreatePointerUp(PointerButton.TouchContact));
// Drag a touch contact diagonally in NE direction approaching the other contact point
PointerInputDevice touch2 = new PointerInputDevice(PointerKind.Touch);
ActionSequence touch2Sequence = new ActionSequence(touch2, 0);
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -50, 50, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerDown(PointerButton.TouchContact));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -45, 45, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -40, 40, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -35, 35, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -30, 30, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -25, 25, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerMove(zoomInteractor, -20, 20, TimeSpan.Zero));
touch2Sequence.AddAction(touch2.CreatePointerUp(PointerButton.TouchContact));
// Perform the 2 fingers zoom out (pinch) multi-touch sequences defined above
session.PerformActions(new List <ActionSequence> {
touch1Sequence, touch2Sequence
});
// Ensure that the zoom level now is less than 100%
Assert.IsTrue(int.Parse(zoomScaleTextBox.Text) < 100);
}