private void butOK_Click(object sender, System.EventArgs e)
{
if (textProcDate.errorProvider1.GetError(textProcDate) != "" ||
textAmount.errorProvider1.GetError(textAmount) != "")
{
MsgBox.Show(this, "Please fix data entry errors first.");
return;
}
if (textProcDate.Text == "")
{
MsgBox.Show(this, "Please enter a date first.");
return;
}
if (_procCur.ProcStatus == ProcStat.C && PIn.Date(textProcDate.Text).Date > DateTime.Today.Date && !PrefC.GetBool(PrefName.FutureTransDatesAllowed))
{
MsgBox.Show(this, "Completed procedures cannot be set for future dates.");
return;
}
if (textAmount.Text == "")
{
MsgBox.Show(this, "Please enter an amount.");
return;
}
if (comboProv.GetSelectedProvNum() != _procOld.ProvNum && PrefC.GetBool(PrefName.ProcProvChangesClaimProcWithClaim))
{
List <ClaimProc> listClaimProc = ClaimProcs.GetForProc(ClaimProcs.Refresh(_procOld.PatNum), _procOld.ProcNum);
if (listClaimProc.Any(x => x.Status == ClaimProcStatus.Received ||
x.Status == ClaimProcStatus.Supplemental ||
x.Status == ClaimProcStatus.CapClaim))
{
MsgBox.Show(this, "The provider cannot be changed when this procedure is attached to a claim.");
return;
}
}
_procCur.ProcDate = PIn.Date(textProcDate.Text);
_procCur.ProcFee = PIn.Double(textAmount.Text);
_procCur.Note = textChartNotes.Text;
_procCur.BillingNote = textAccountNotes.Text;
_procCur.ProvNum = comboProv.GetSelectedProvNum();
_procCur.ClinicNum = comboClinic.SelectedClinicNum;
Procedures.Update(_procCur, _procOld);
ProcedureCode procedureCode = ProcedureCodes.GetProcCode(_procCur.CodeNum);
string logText = procedureCode.ProcCode + " (" + _procCur.ProcStatus + "), " + Lan.g(this, "Fee") + ": " + _procCur.ProcFee.ToString("c") + ", " + procedureCode.Descript;
SecurityLogs.MakeLogEntry(IsNew ? Permissions.ProcComplCreate : Permissions.ProcComplEdit, _procCur.PatNum, logText);
DialogResult = DialogResult.OK;
}
private void butNewClaims_Click(object sender, EventArgs e)
{
if (gridMain.SelectedIndices.Length == 0) //No selections made.
{
MsgBox.Show(this, "Please select at least one procedure.");
return;
}
if (!ContrAccount.CheckClearinghouseDefaults())
{
return;
}
//Generate List and Table----------------------------------------------------------------------------------------------------------------------
//List of all procedures being shown.
//Pulls procedures based off of the PatNum, if the row was selected in gridMain and if it has been attached to a claim.
List <ProcNotBilled> listNotBilledProcs = new List <ProcNotBilled>();
List <long> listPatNums = new List <long>();
Patient patOld = new Patient();
List <Claim> listPatClaims = new List <Claim>();
List <ClaimProc> listPatClaimProcs = new List <ClaimProc>();
List <ClaimProc> listCurClaimProcs = new List <ClaimProc>();
//Table rows need to be 1:1 with gridMain rows due to logic in ContrAccount.toolBarButIns_Click(...).
DataTable table = new DataTable();
//Required columns as mentioned by ContrAccount.toolBarButIns_Click().
table.Columns.Add("ProcNum");
table.Columns.Add("chargesDouble");
table.Columns.Add("ProcNumLab");
for (int i = 0; i < gridMain.Rows.Count; i++) //Loop through gridMain to construct listNotBilledProcs.
{
long procNumCur = PIn.Long(gridMain.Rows[i].Tag.ToString()); //Tag is set to procNum in fillGrid().
Procedure procCur = Procedures.GetOneProc(procNumCur, false);
long patNumCur = procCur.PatNum;
if (patOld.PatNum != patNumCur) //Procedures in gridMain are ordered by patient, so when the patient changes, we know previous patient is complete.
{
listPatClaims = Claims.Refresh(patNumCur);
listPatClaimProcs = ClaimProcs.Refresh(patNumCur);
patOld = Patients.GetPat(procCur.PatNum);
}
listCurClaimProcs = ClaimProcs.GetForProc(listPatClaimProcs, procNumCur);
bool hasPriClaim = false;
bool hasSecClaim = false;
for (int j = 0; j < listCurClaimProcs.Count; j++)
{
ClaimProc claimProcCur = listCurClaimProcs[j];
if (claimProcCur.ClaimNum > 0 && claimProcCur.Status != ClaimProcStatus.Preauth && claimProcCur.Status != ClaimProcStatus.Estimate)
{
Claim claimCur = Claims.GetFromList(listPatClaims, claimProcCur.ClaimNum);
switch (claimCur.ClaimType)
{
case "P":
hasPriClaim = true;
break;
case "S":
hasSecClaim = true;
break;
}
}
}
bool isSelected = gridMain.SelectedIndices.Contains(i);
listNotBilledProcs.Add(new ProcNotBilled(patOld, procNumCur, i, isSelected, hasPriClaim, hasSecClaim, procCur.ClinicNum, procCur.PlaceService));
DataRow row = table.NewRow();
row["ProcNum"] = procNumCur;
#region Calculate chargesDouble
//Logic copied from AccountModules.GetAccount(...) line 857.
double qty = (procCur.UnitQty + procCur.BaseUnits);
if (qty == 0)
{
qty = 1;
}
double writeOffCapSum = listPatClaimProcs.Where(x => x.Status == ClaimProcStatus.CapComplete).Select(y => y.WriteOff).ToList().Sum();
row["chargesDouble"] = (procCur.ProcFee * qty) - writeOffCapSum;
row["ProcNumLab"] = procCur.ProcNumLab;
#endregion Calculate chargesDouble
table.Rows.Add(row);
if (listPatNums.Contains(patNumCur))
{
continue;
}
listPatNums.Add(patNumCur);
}
List <List <ProcNotBilled> > listGroupedProcs = new List <List <ProcNotBilled> >();
Patient patCur = null;
List <PatPlan> listPatPlans = null;
List <InsSub> listInsSubs = null;
List <InsPlan> listInsPlans = null;
List <Procedure> listPatientProcs = null;
ProcNotBilled procNotBilled = new ProcNotBilled(); //When automatically grouping, this is used as the procedure to group by.
long patNumOld = 0;
int claimCreatedCount = 0;
int patIndex = 0;
//The procedures show in the grid ordered by patient. Also listPatNums contains unique patnums which are in the same order as the grid.
while (patIndex < listPatNums.Count)
{
List <ProcNotBilled> listProcs = listNotBilledProcs.Where(x => x.Patient.PatNum == listPatNums[patIndex] && x.IsRowSelected && !x.IsAttached).ToList();
if (listProcs.Count == 0)
{
patNumOld = listPatNums[patIndex];
patIndex++; //No procedures were selected for this patient.
continue;
}
else
{
//Maintain the same patient, in order to create one or more additional claims for the remaining procedures.
//Currently will only happen for specific instances;
//--Canadian customers who are attempting to create a claim with over 7 procedures.
//--When checkAutoGroupProcs is checked and when there are multiple procedure groupings by GroupKey status, ClinicNum, and placeService.
}
if (patNumOld != listPatNums[patIndex]) //The patient could repeat if we had to group the procedures for the patinet into multiple claims.
{
patCur = Patients.GetPat(listPatNums[patIndex]);
listPatPlans = PatPlans.Refresh(patCur.PatNum);
listInsSubs = InsSubs.RefreshForFam(Patients.GetFamily(patCur.PatNum));
listInsPlans = InsPlans.RefreshForSubList(listInsSubs);
listPatientProcs = Procedures.Refresh(patCur.PatNum);
}
if (checkAutoGroupProcs.Checked) //Automatically Group Procedures.
{
procNotBilled = listProcs[0];
//Update listProcs to reflect those that match the procNotBilled values.
listProcs = listProcs.FindAll(x => x.HasPriClaim == procNotBilled.HasPriClaim && x.HasSecClaim == procNotBilled.HasSecClaim);
if (PrefC.HasClinicsEnabled) //Group by clinic only if clinics enabled.
{
listProcs = listProcs.FindAll(x => x.ClinicNum == procNotBilled.ClinicNum);
}
else if (!PrefC.GetBool(PrefName.EasyHidePublicHealth)) //Group by Place of Service only if Public Health feature is enabled.
{
listProcs = listProcs.FindAll(x => x.PlaceService == procNotBilled.PlaceService);
}
}
GetUniqueDiagnosticCodes(listProcs, listPatientProcs, listPatPlans, listInsSubs, listInsPlans);
if (listProcs.Count > 7 && CultureInfo.CurrentCulture.Name.EndsWith("CA")) //Canadian. en-CA or fr-CA
{
listProcs = listProcs.Take(7).ToList(); //Returns first 7 items of the list.
}
listProcs.ForEach(x => x.IsAttached = true); //This way we can not attach procedures to multiple claims thanks to the logic above.
if (listProcs.Any(x => listProcs[0].PlaceService != x.PlaceService) || listProcs.Any(x => listProcs[0].ClinicNum != x.ClinicNum))
{
//Regardless if we are automatically grouping or not,
//if all procs in our list at this point do not share the same PlaceService or ClinicNum then claims will not be made.
}
else //Basic validation passed.
{
if (!listProcs[0].HasPriClaim && //Medical claim.
PatPlans.GetOrdinal(PriSecMed.Medical, listPatPlans, listInsPlans, listInsSubs) > 0 && //Has medical ins.
PatPlans.GetOrdinal(PriSecMed.Primary, listPatPlans, listInsPlans, listInsSubs) == 0 && //Does not have primary dental ins.
PatPlans.GetOrdinal(PriSecMed.Secondary, listPatPlans, listInsPlans, listInsSubs) == 0) //Does not have secondary dental ins.
{
claimCreatedCount++;
}
else //Not a medical claim.
{
if (!listProcs[0].HasPriClaim && PatPlans.GetOrdinal(PriSecMed.Primary, listPatPlans, listInsPlans, listInsSubs) > 0) //Primary claim.
{
claimCreatedCount++;
}
if (!listProcs[0].HasSecClaim && PatPlans.GetOrdinal(PriSecMed.Secondary, listPatPlans, listInsPlans, listInsSubs) > 0) //Secondary claim.
{
claimCreatedCount++;
}
}
}
listGroupedProcs.Add(listProcs);
}
if (!MsgBox.Show(this, true, "Clicking continue will create up to " + POut.Int(claimCreatedCount) + " claims and cannot be undone, except by manually going to each account. "
+ "Some claims may not be created if there are validation issues. Would you like to proceed?"))
{
return;
}
//Create Claims--------------------------------------------------------------------------------------------------------------------------------
claimCreatedCount = 0;
string claimErrors = "";
foreach (List <ProcNotBilled> listProcs in listGroupedProcs)
{
patCur = listProcs[0].Patient;
gridMain.SetSelected(false); //Need to deslect all rows each time so that ContrAccount.toolBarButIns_Click(...) only uses pertinent rows.
for (int j = 0; j < listProcs.Count; j++)
{
gridMain.SetSelected(listProcs[j].RowIndex, true); //Select the pertinent rows so that they will be attached to the claim below.
}
ContrAccount.toolBarButIns_Click(false, patCur, Patients.GetFamily(patCur.PatNum), gridMain, table,
procNotBilled.HasPriClaim, procNotBilled.HasSecClaim);
string errorTitle = patCur.PatNum + " " + patCur.GetNameLFnoPref() + " - ";
if (patNumOld == patCur.PatNum && !string.IsNullOrEmpty(ContrAccount.ClaimErrorsCur))
{
claimErrors += "\t\t" + ContrAccount.ClaimErrorsCur + "\r\n";
}
else if (!string.IsNullOrEmpty(ContrAccount.ClaimErrorsCur))
{
claimErrors += errorTitle + ContrAccount.ClaimErrorsCur + "\r\n";
}
claimCreatedCount += ContrAccount.ClaimCreatedCount;
patNumOld = patCur.PatNum;
}
FillGrid();
if (!string.IsNullOrEmpty(claimErrors))
{
MsgBoxCopyPaste form = new MsgBoxCopyPaste(claimErrors);
form.ShowDialog();
}
MessageBox.Show(Lan.g(this, "Number of claims created") + ": " + claimCreatedCount);
}
private void butOK_Click(object sender, System.EventArgs e)
{
RepeatCharge[] chargeList = RepeatCharges.Refresh(0); //Gets all repeating charges for all patients, they may be disabled
int countAdded = 0;
int claimsAdded = 0;
DateTime startDate;
Procedure proc;
for (int i = 0; i < chargeList.Length; i++)
{
if (!chargeList[i].IsEnabled) //first make sure it is not disabled
{
continue;
}
if (chargeList[i].DateStart > DateTime.Today) //not started yet
{
continue;
}
//if(chargeList[i].DateStop.Year>1880//not blank
// && chargeList[i].DateStop<DateTime.Today)//but already ended
//{
// continue;
//}
//get a list dates of all completed procedures with this Code and patNum
ArrayList ALdates = RepeatCharges.GetDates(ProcedureCodes.GetCodeNum(chargeList[i].ProcCode), chargeList[i].PatNum);
startDate = chargeList[i].DateStart;
//This is the repeating date using the old methodology. It is necessary for checking if the repeating procedure was already added using the old methodology.
DateTime possibleDateOld = startDate;
//This is a more accurate repeating date which will allow procedures to be added on the 28th and later.
DateTime possibleDateNew = startDate;
int countMonths = 0;
//start looping through possible dates, beginning with the start date of the repeating charge
while (possibleDateNew <= DateTime.Today)
{
//Only allow back dating up to one month and 20 days.
if (possibleDateNew < DateTime.Today.AddDays(-50))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue; //don't go back more than one month and 20 days
}
//check to see if the possible date is present in the list
if (ALdates.Contains(possibleDateNew) ||
ALdates.Contains(possibleDateOld))
{
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
continue;
}
if (chargeList[i].DateStop.Year > 1880 && //not blank
chargeList[i].DateStop < possibleDateNew) //but already ended
{
break;
}
//otherwise, insert a procedure to db
proc = new Procedure();
proc.CodeNum = ProcedureCodes.GetCodeNum(chargeList[i].ProcCode);
proc.DateEntryC = DateTimeOD.Today;
proc.PatNum = chargeList[i].PatNum;
proc.ProcDate = possibleDateNew;
proc.DateTP = possibleDateNew;
proc.ProcFee = chargeList[i].ChargeAmt;
proc.ProcStatus = ProcStat.C;
proc.ProvNum = PrefC.GetLong(PrefName.PracticeDefaultProv);
proc.MedicalCode = ProcedureCodes.GetProcCode(proc.CodeNum).MedicalCode;
proc.BaseUnits = ProcedureCodes.GetProcCode(proc.CodeNum).BaseUnits;
proc.DiagnosticCode = PrefC.GetString(PrefName.ICD9DefaultForNewProcs);
//Check if the repeating charge has been flagged to copy it's note into the billing note of the procedure.
if (chargeList[i].CopyNoteToProc)
{
proc.BillingNote = chargeList[i].Note;
}
Procedures.Insert(proc); //no recall synch needed because dental offices don't use this feature
countAdded++;
possibleDateOld = possibleDateOld.AddMonths(1);
countMonths++;
possibleDateNew = startDate.AddMonths(countMonths);
if (chargeList[i].CreatesClaim && !ProcedureCodes.GetProcCode(chargeList[i].ProcCode).NoBillIns)
{
List <PatPlan> patPlanList = PatPlans.Refresh(chargeList[i].PatNum);
List <InsSub> subList = InsSubs.RefreshForFam(Patients.GetFamily(chargeList[i].PatNum));
List <InsPlan> insPlanList = InsPlans.RefreshForSubList(subList);;
List <Benefit> benefitList = Benefits.Refresh(patPlanList, subList);
Claim claimCur;
List <Procedure> procCurList = new List <Procedure>();
procCurList.Add(proc);
if (patPlanList.Count == 0) //no current insurance, do not create a claim
{
continue;
}
//create the claimprocs
Procedures.ComputeEstimates(proc, proc.PatNum, new List <ClaimProc>(), true, insPlanList, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
//get claimprocs for this proc, may be more than one
List <ClaimProc> claimProcList = ClaimProcs.GetForProc(ClaimProcs.Refresh(proc.PatNum), proc.ProcNum);
string claimType = "P";
if (patPlanList.Count == 1 && PatPlans.GetOrdinal(PriSecMed.Medical, patPlanList, insPlanList, subList) > 0) //if there's exactly one medical plan
{
claimType = "Med";
}
claimCur = CreateClaim(claimType, patPlanList, insPlanList, claimProcList, proc, subList);
claimProcList = ClaimProcs.Refresh(proc.PatNum);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
if (PatPlans.GetOrdinal(PriSecMed.Secondary, patPlanList, insPlanList, subList) > 0 && //if there exists a secondary plan
!CultureInfo.CurrentCulture.Name.EndsWith("CA")) //and not canada (don't create secondary claim for canada)
{
claimCur = CreateClaim("S", patPlanList, insPlanList, claimProcList, proc, subList);
if (claimCur.ClaimNum == 0)
{
continue;
}
claimsAdded++;
claimProcList = ClaimProcs.Refresh(proc.PatNum);
claimCur.ClaimStatus = "H";
ClaimL.CalculateAndUpdate(procCurList, insPlanList, claimCur, patPlanList, benefitList, Patients.GetPat(proc.PatNum).Age, subList);
}
}
}
}
//MessageBox.Show(countAdded.ToString()+" "+Lan.g(this,"procedures added."));
MessageBox.Show(countAdded.ToString() + " " + Lan.g(this, "procedures added.") + "\r\n" + claimsAdded.ToString() + " " + Lan.g(this, "claims added."));
DialogResult = DialogResult.OK;
}
private void butOK_Click(object sender, EventArgs e)
{
if (!EntriesAreValid())
{
return;
}
//This list should only contain a single patNum, but just in case.
List <long> listDistinctPatNums = ProcList.Select(x => x.PatNum).Distinct().ToList();
DateTime procDate = DateTime.MinValue;
if (textDate.Text != "" && ProcList.Any(x => x.ProcDate != PIn.Date(textDate.Text)))
{
procDate = PIn.Date(textDate.Text);
}
#region Update ProcList and DB to reflect selections
List <ClaimProc> listClaimProcsAll = ClaimProcs.RefreshForProcs(ProcList.Select(x => x.ProcNum).ToList());
//Get data for any OrthoCases that may be linked to procs in ProcList
List <OrthoProcLink> listOrthoProcLinksAllForPat = new List <OrthoProcLink>();
Dictionary <long, OrthoProcLink> dictOrthoProcLinksForProcList = new Dictionary <long, OrthoProcLink>();
Dictionary <long, OrthoCase> dictOrthoCases = new Dictionary <long, OrthoCase>();
Dictionary <long, OrthoSchedule> dictOrthoSchedules = new Dictionary <long, OrthoSchedule>();
OrthoCases.GetDataForListProcs(ref listOrthoProcLinksAllForPat, ref dictOrthoProcLinksForProcList, ref dictOrthoCases, ref dictOrthoSchedules, ProcList);
OrthoCase orthoCase = null;
OrthoSchedule orthoSchedule = null;
List <OrthoProcLink> listOrthoProcLinksForOrthoCase = null;
foreach (Procedure proc in ProcList)
{
bool hasChanged = false;
bool hasDateChanged = false;
List <ClaimProc> listClaimProcsForProc = ClaimProcs.GetForProc(listClaimProcsAll, proc.ProcNum);
Procedure procOld = _procOldList.Find(x => x.ProcNum == proc.ProcNum); //this shouldn't fail, it needs to be in this list.
if (procDate != DateTime.MinValue && proc.ProcDate != procDate) //Using value entered in the textbox.
{
proc.ProcDate = procDate;
//ClaimProc.ProcDate will be "synched" in Procedures.ComputeEstimates(), but only if not attached to a claim. Mimics FormprocEdit.
hasDateChanged = true;
hasChanged = true;
}
if (comboProv.GetSelected <Provider>() != null && comboProv.GetSelected <Provider>().ProvNum != proc.ProvNum) //Using selection
{
proc.ProvNum = comboProv.GetSelected <Provider>().ProvNum;
//Mimics FormProcEdit, uses different criteria than Procedures.ComputeEstimates().
ClaimProcs.TrySetProvFromProc(proc, listClaimProcsForProc);
hasChanged = true;
}
if (comboClinic.GetSelected <Clinic>() != null && comboClinic.GetSelected <Clinic>().ClinicNum != proc.ClinicNum) //Using selection
{
proc.ClinicNum = comboClinic.GetSelected <Clinic>().ClinicNum;
listClaimProcsForProc.ForEach(x => x.ClinicNum = proc.ClinicNum);
hasChanged = true;
}
if (hasChanged)
{
Procedures.Update(proc, procOld);
if (hasDateChanged)
{
List <ClaimProc> listNewClaimProcs;
dictOrthoProcLinksForProcList.TryGetValue(proc.ProcNum, out OrthoProcLink orthoProcLink);
//If proc is linked to an OrthoCase, update dates for OrthoCase.
if (orthoProcLink != null)
{
OrthoCases.UpdateDatesByLinkedProc(orthoProcLink, proc);
}
OrthoCases.FillOrthoCaseObjectsForProc(proc.ProcNum, ref orthoProcLink, ref orthoCase, ref orthoSchedule, ref listOrthoProcLinksForOrthoCase,
dictOrthoProcLinksForProcList, dictOrthoCases, dictOrthoSchedules, listOrthoProcLinksAllForPat);
RecomputeEstimates(proc, listClaimProcsForProc, out listNewClaimProcs, orthoProcLink, orthoCase, orthoSchedule, listOrthoProcLinksForOrthoCase);
ClaimProcs.InsertMany(listNewClaimProcs); //Only insert claimProcs that were newly added.
}
}
}
ClaimProcs.UpdateMany(listClaimProcsAll); //Does not contain new claimProcs.
foreach (long patNum in listDistinctPatNums) //Should be a single patient.
{
Recalls.Synch(patNum);
}
#endregion
#region Security Log Entries
string logTextProcComplete = ""; //To make security log for procs that were C (specific permission)
string logTextProcExisting = ""; //To make a security log for procs that were EO,EC (specific permission)
string logTextProcOther = ""; //All other procedures (general permission)
foreach (long patNum in listDistinctPatNums)
{
foreach (Procedure proc in ProcList) //necessary because of different original values
{
Procedure procOld = _procOldList.FirstOrDefault(x => x.ProcNum == proc.ProcNum);
if (procOld == null)
{
continue;
}
//If proc has not been changed then a blank string will be returned.
//Only changed procs will be reflected in security log entries.
switch (procOld.ProcStatus)
{
case ProcStat.C:
logTextProcComplete += ConstructSecurityLogForProcType(proc, procOld);
break;
case ProcStat.EO:
case ProcStat.EC:
logTextProcExisting += ConstructSecurityLogForProcType(proc, procOld);
break;
default:
logTextProcOther += ConstructSecurityLogForProcType(proc, procOld);
break;
}
}
if (logTextProcComplete != "")
{
SecurityLogs.MakeLogEntry(Permissions.ProcComplEdit, patNum, logTextProcComplete);
}
if (logTextProcExisting != "")
{
SecurityLogs.MakeLogEntry(Permissions.ProcExistingEdit, patNum, logTextProcExisting);
}
if (logTextProcOther != "")
{
SecurityLogs.MakeLogEntry(Permissions.ProcEdit, patNum, logTextProcOther);
}
}
#endregion
DialogResult = DialogResult.OK;
}
private bool EntriesAreValid()
{
//Get a new recent list of claimprocs for pat to be able to validate for provider and procedure status change.
if (textDate.Text != "" && textDate.errorProvider1.GetError(textDate) != "")
{
//Either loaded blank or user deleted date. Either way blank will not make it to DB.
MsgBox.Show(this, "Please fix data entry errors first.");
return(false);
}
DateTime procDate = PIn.Date(textDate.Text);
if (textDate.Text != "" && ProcList.Any(x => x.ProcDate != procDate))
{
if (!IsUserAuthorizedForProcDate(procDate)) //Do not allow new ProcDate outside of date limitations. Mimics behavior in FormProcEdit.
{
return(false);
}
Appointment apt;
foreach (Procedure proc in ProcList) //first validate for all dates.
{
#region Future dating completed procedures validation.
if (!PrefC.GetBool(PrefName.FutureTransDatesAllowed) && proc.ProcStatus == ProcStat.C && procDate > DateTime.Today)
{
MsgBox.Show(this, "Completed procedures cannot have future dates.");
return(false);
}
#endregion
#region Procedures attached to appointments date validation.
if (proc.AptNum == 0)
{
continue;
}
apt = Appointments.GetOneApt(proc.AptNum);
if (proc.ProcDate.Date != apt.AptDateTime.Date)
{
string error = Lan.g(this, "Date does not match appointment date for a procedure dated:") + " " + proc.ProcDate.ToShortDateString()
+ "\r\n" + Lan.g(this, "Continue anyway?");
if (MessageBox.Show(error, "", MessageBoxButtons.YesNo) == DialogResult.No)
{
return(false);
}
break;
}
#endregion
}
}
List <ClaimProc> listClaimProcsForPat = ClaimProcs.RefreshForProcs(ProcList.Select(x => x.ProcNum).ToList());
foreach (Procedure proc in ProcList)
{
if (proc.IsLocked)
{
MsgBox.Show(this, "Locked procedures cannot be edited.");
return(false);
}
#region Provider change validation.
List <ClaimProc> listClaimProcsForProc = ClaimProcs.GetForProc(listClaimProcsForPat, proc.ProcNum);
long selectedProvNum = (comboProv.GetSelected <Provider>()?.ProvNum ?? 0);//0 if no selection made
if (selectedProvNum != 0 && !ProcedureL.ValidateProvider(listClaimProcsForProc, selectedProvNum, proc.ProvNum))
{
return(false);
}
#endregion
}
return(true);
}