private void EraseDeploymentSectors(string devicePath, Firmware upgradeFirmware)
{
STDfuDevice device = new STDfuDevice(devicePath);
// TODO: make sure we are in DFU mode; if we are in app mode (runtime) then we need to detach and re-enumerate.
// get our total deployment sectors count
List <uint> allSectorBaseAddresses = new List <uint>();
foreach (Firmware.FirmwareRegion region in upgradeFirmware.FirmwareRegions)
{
if (region.Name.ToUpper() == "DEPLOYMENT")
{
allSectorBaseAddresses.AddRange(region.SectorBaseAddresses);
}
}
// erase each sector
for (int iSector = 0; iSector < allSectorBaseAddresses.Count; iSector++)
{
if (!device.EraseSector(allSectorBaseAddresses[iSector]))
{
throw new Exception("Could not erase sector.");
}
_updateWorker.ReportProgress((int)((((double)iSector + 1) / (double)allSectorBaseAddresses.Count) * 100));
}
//// step 4: restart board
//device.SetAddressPointer(0x08000001); // NOTE: for thumb2 instructinos, we added 1 to the "base address". Otherwise our board will not restart properly.
//// leave DFU mode.
//device.LeaveDfuMode();
}
private void EraseAndUploadDevice(string devicePath, Firmware upgradeFirmware, double startProgressPercent, double operationTotalProgressPercent)
{
double localProgressPercent = 0.0;
STDfuDevice device = new STDfuDevice(devicePath);
// TODO: make sure we are in DFU mode; if we are in app mode (runtime) then we need to detach and re-enumerate.
// get our total sectors and block counts
List <uint> allSectorBaseAddresses = new List <uint>();
uint totalBlockCount = 0;
foreach (Firmware.FirmwareRegion region in upgradeFirmware.FirmwareRegions)
{
allSectorBaseAddresses.AddRange(region.SectorBaseAddresses);
if (region.Filename != null)
{
System.IO.StreamReader streamReader = new System.IO.StreamReader(upgradeFirmware.FolderPath + "\\" + region.Filename);
string hexFileString = streamReader.ReadToEnd();
streamReader.Dispose();
byte[] hexFileBytes = SrecHexEncoding.GetBytes(hexFileString, region.BaseAddress);
totalBlockCount += (uint)Math.Ceiling((double)hexFileBytes.Length / (double)device.BlockTransferSize);
}
}
// erase each sector
for (int iSector = 0; iSector < allSectorBaseAddresses.Count; iSector++)
{
if (!device.EraseSector(allSectorBaseAddresses[iSector]))
{
throw new Exception("Could not erase sector.");
}
localProgressPercent = (((double)iSector + 1) / (double)allSectorBaseAddresses.Count) * 0.5;
_updateWorker.ReportProgress(CalculateWorkerProgress(localProgressPercent, startProgressPercent, operationTotalProgressPercent));
}
// do "read unprotect"
//Debug.Print("Unprotecting all sectors, erasing...");
//Debug.Print("operation " + (stdfuDeviceReadUnprotect() ? "SUCCESS" : "FAILED"));
//// do mass erase
//Debug.Print("erasing all sectors...");
//Debug.Print("operation " + (device.EraseAllSectors() ? "SUCCESS" : "FAILED"));
//localProgressPercent = 0.3;
// now flash the board!
ushort blockSize = device.BlockTransferSize;
ushort completedBlocks = 0;
foreach (Firmware.FirmwareRegion region in upgradeFirmware.FirmwareRegions)
{
if (region.Filename != null)
{
System.IO.StreamReader streamReader = new System.IO.StreamReader(upgradeFirmware.FolderPath + "\\" + region.Filename);
string hexFileString = streamReader.ReadToEnd();
streamReader.Dispose();
byte[] hexFileBytes = SrecHexEncoding.GetBytes(hexFileString, region.BaseAddress);
// set our download address pointer
if (device.SetAddressPointer(region.BaseAddress) == false)
{
throw new Exception("Could not set base address for flash operation.");
}
// write blocks to the board and verify; we must have already erased our sectors before this point
for (ushort index = 0; index <= (hexFileBytes.Length / blockSize); index++)
{
// write block to the board
byte[] buffer = new byte[Math.Min(hexFileBytes.Length - (index * blockSize), blockSize)];
Array.Copy(hexFileBytes, index * blockSize, buffer, 0, buffer.Length);
bool success = device.WriteMemoryBlock(index, buffer);
if (!success)
{
throw new Exception("Write failed.");
}
// verify written block
byte[] verifyBuffer = new byte[buffer.Length];
success = device.ReadMemoryBlock(index, verifyBuffer);
if (!success || !buffer.SequenceEqual(verifyBuffer))
{
throw new Exception("Verify failed.");
}
completedBlocks++;
localProgressPercent = 0.5 + (((double)(completedBlocks + 1) / (double)totalBlockCount) * 0.5);
_updateWorker.ReportProgress(CalculateWorkerProgress(localProgressPercent, startProgressPercent, operationTotalProgressPercent));
}
}
}
// step 4: restart board
device.SetAddressPointer(0x08000001); // NOTE: for thumb2 instructinos, we added 1 to the "base address". Otherwise our board will not restart properly.
// leave DFU mode.
device.LeaveDfuMode();
}
public bool ReadSettings(out byte productID, out byte[] macAddress, out byte otpSlotsFree)
{
macAddress = new byte[] { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; // default to empty address
otpSlotsFree = 0; // default to "no slots free"
productID = 0;
STDfuDevice device;
try
{
device = new STDfuDevice(_devicePath);
}
catch
{
return(false);
}
try
{
// set pointer to the OTP memory space
bool success = device.SetAddressPointer(0x1FFF7800);
if (!success)
{
return(false);
}
// request the first 32 bytes of OTP; this will contain our board type and MAC address
// OTP format: {unused, boardType, macAddress5, macAddress4, macAddress3, macAddress2, macAddress1, macAddress0}
// NOTE: the first eight bytes are the data; if those bytes are all 0x00 then the next step of eight bytes are the data. Repeat up to 4 tries total to retrieve data.
// netduino plus 2
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x05, 0x5C, 0x86, 0x4A, 0x00, 0xD0, 0x05, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino plus 2 -- no MAC
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x05, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino 2
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x06, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino go
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x04, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
//device.WriteMemoryBlock(0, otpConfiguration);
byte[] otpConfiguration = new byte[32];
success = device.ReadMemoryBlock(0, otpConfiguration);
if (!success)
{
return(false);
}
int iConfiguration;
for (iConfiguration = 0; iConfiguration < TOTAL_OTP_SLOTS; iConfiguration++)
{
bool configurationIsEmpty = true;
// make sure that the configuration is not all 0xFF
for (int iConfigurationByteCheck = 0; iConfigurationByteCheck < CONFIGURATION_SIZE; iConfigurationByteCheck++)
{
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + iConfigurationByteCheck] != 0xFF)
{
configurationIsEmpty = false;
}
}
bool configurationValid = false;
if (!configurationIsEmpty)
{
for (int iConfigurationByteCheck = 0; iConfigurationByteCheck < CONFIGURATION_SIZE; iConfigurationByteCheck++)
{
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + iConfigurationByteCheck] != 0)
{
configurationValid = true;
}
}
// make sure that the leading byte is 0xFF
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + 0] != 0xFF)
{
configurationValid = false;
}
}
else
{
otpSlotsFree = (byte)(TOTAL_OTP_SLOTS - iConfiguration);
break;
}
if (configurationValid)
{
productID = otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + 1];
Array.Copy(otpConfiguration, (iConfiguration * CONFIGURATION_SIZE) + 2, macAddress, 0, 6);
otpSlotsFree = (byte)(TOTAL_OTP_SLOTS - iConfiguration - 1);
break;
}
}
}
finally
{
device.Dispose();
}
return(true);
}
public bool WriteSettings(byte productID, byte[] macAddress)
{
// validate arguments
if (productID == 0xFF)
{
throw new ArgumentOutOfRangeException("productID");
}
if (macAddress == null || macAddress.Length != 6)
{
throw new ArgumentOutOfRangeException("macAddress");
}
STDfuDevice device = new STDfuDevice(_devicePath);
try
{
// set pointer to the OTP memory space
device.SetAddressPointer(0x1FFF7800);
// request the first 32 bytes of OTP; this will contain our board type and MAC address
// OTP format: {unused, boardType, macAddress5, macAddress4, macAddress3, macAddress2, macAddress1, macAddress0}
// NOTE: the first eight bytes are the data; if those bytes are all 0x00 then the next set of eight bytes are the data. Repeat up to 4 tries total to retrieve data.
// netduino plus 2
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x05, 0x5C, 0x86, 0x4A, 0x00, 0xD0, 0x05, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino plus 2 -- no MAC
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x05, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino 2
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x06, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// netduino go
//byte[] otpConfiguration = new byte[32] { 0xFF, 0x04, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
// 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
byte[] otpConfiguration = new byte[32];
device.ReadMemoryBlock(0, otpConfiguration);
// now determine which slot is our current slot
int otpCurrentSlot = -1; // -1 = no slot used yet
byte otpSlotsFree = 0; // default to "no slots free"
int iConfiguration;
for (iConfiguration = 0; iConfiguration < TOTAL_OTP_SLOTS; iConfiguration++)
{
bool configurationIsEmpty = true;
// make sure that the configuration is not all 0xFF
for (int iConfigurationByteCheck = 0; iConfigurationByteCheck < CONFIGURATION_SIZE; iConfigurationByteCheck++)
{
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + iConfigurationByteCheck] != 0xFF)
{
configurationIsEmpty = false;
}
}
bool configurationValid = false;
if (!configurationIsEmpty)
{
for (int iConfigurationByteCheck = 0; iConfigurationByteCheck < CONFIGURATION_SIZE; iConfigurationByteCheck++)
{
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + iConfigurationByteCheck] != 0)
{
configurationValid = true;
}
}
// make sure that the leading byte is 0xFF
if (otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + 0] != 0xFF)
{
configurationValid = false;
}
}
else
{
otpSlotsFree = (byte)(TOTAL_OTP_SLOTS - iConfiguration);
otpCurrentSlot = iConfiguration;
break;
}
if (configurationValid)
{
otpSlotsFree = (byte)(TOTAL_OTP_SLOTS - iConfiguration - 1);
otpCurrentSlot = iConfiguration;
break;
}
}
// if we don't have any slots available, return false
if (otpCurrentSlot == -1)
{
return(false);
}
// create our configuration (8 bytes)
byte[] deviceConfiguration = new byte[] { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
deviceConfiguration[1] = productID;
Array.Copy(macAddress, 0, deviceConfiguration, 2, macAddress.Length);
// determine if we can re-use the current OTP block. If our new settings set any bits to "1" then we will copy to the next configuration slot.
for (iConfiguration = otpCurrentSlot; iConfiguration < TOTAL_OTP_SLOTS; iConfiguration++)
{
byte[] newOtpConfiguration = new byte[otpConfiguration.Length];
Array.Copy(otpConfiguration, newOtpConfiguration, otpConfiguration.Length);
Array.Copy(deviceConfiguration, 0, newOtpConfiguration, iConfiguration * CONFIGURATION_SIZE, deviceConfiguration.Length);
// fill all previous slots with zeros (so they are marked as unused)
for (int i = 0; i < iConfiguration * CONFIGURATION_SIZE; i++)
{
newOtpConfiguration[i] = 0;
}
bool slotCanBeUsed = true;
// find out if we can write the new configuration in this slot (because it's either empty or we are only setting bits in a used region to 0s)
for (int i = 0; i < deviceConfiguration.Length; i++)
{
byte oldOtpConfigurationByte = otpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + i];
byte newOtpConfigurationByte = newOtpConfiguration[(iConfiguration * CONFIGURATION_SIZE) + i];
if ((oldOtpConfigurationByte & newOtpConfigurationByte) != newOtpConfigurationByte)
{
// new configuration byte cannot be set by turning "1" bits to "0" bits.
slotCanBeUsed = false;
}
}
if (slotCanBeUsed)
{
return(device.WriteMemoryBlock(0, newOtpConfiguration));
}
}
}
finally
{
device.Dispose();
}
// if we get here, we could not find a slot to write the configuration.
return(false);
}