private static void Main()
{
using (var frontend = new RouterSocket("@tcp://127.0.0.1:5559"))
using (var backend = new DealerSocket("@tcp://127.0.0.1:5560"))
{
// Handler for messages coming in to the frontend
frontend.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
backend.SendMultipartMessage(msg); // Relay this message to the backend
};
// Handler for messages coming in to the backend
backend.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
frontend.SendMultipartMessage(msg); // Relay this message to the frontend
};
using (var poller = new NetMQPoller {backend, frontend})
{
// Listen out for events on both sockets and raise events when messages come in
poller.Run();
}
}
}
private void Run(PairSocket shim)
{
shim.ReceiveReady += OnShimReady;
m_receiveSocket.ReceiveReady += OnSocketReady;
m_poller = new NetMQPoller { m_receiveSocket, shim };
shim.SignalOK();
m_poller.Run();
m_receiveSocket.ReceiveReady -= OnSocketReady;
}
public void ReceiveMessageFailedIfWasNotProcessed()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
var serviceName = "echo";
Guid requestId = Guid.Empty;
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// doesn't reply to client
var msg = e.Socket.ReceiveMultipartMessage();
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
Assert.IsTrue(false, "I'm not supposed to receive replies since broker is not sending them");
poller.Stop();
};
session.FailedRequest += (s, e) =>
{
Assert.That(requestId, Is.Not.EqualTo(Guid.Empty));
Assert.That(e.RequestId, Is.EqualTo(requestId));
poller.Stop();
};
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
requestId = session.Send(serviceName, requestMessage);
var result = task.Wait(session.Timeout + session.Timeout);
Assert.IsTrue(result, $"During {session.Timeout}ms was not received a FailedReply");
}
}
public void Run(PairSocket shim)
{
m_pipe = shim;
shim.SignalOK();
m_pipe.ReceiveReady += OnPipeReady;
m_pingTimer = new NetMQTimer(interval: TimeSpan.Zero);
m_pingTimer.Elapsed += PingElapsed;
m_pingTimer.Enable = false;
m_poller = new NetMQPoller {
m_pipe, m_pingTimer
};
m_poller.Run();
// the beacon might never been configured
m_udpSocket?.Close();
}
public void Run(PairSocket shim)
{
m_pipe = shim;
shim.SignalOK();
m_pipe.ReceiveReady += OnPipeReady;
m_pingTimer = new NetMQTimer(interval: TimeSpan.Zero);
m_pingTimer.Elapsed += PingElapsed;
m_pingTimer.Enable = false;
m_poller = new NetMQPoller { m_pipe, m_pingTimer };
m_poller.Run();
// the beacon might never been configured
if (m_udpSocket != null)
m_udpSocket.Close();
}
private void RunActor(PairSocket shim)
{
// save the shim to the class to use later
m_shim = shim;
// create all subscriber, publisher and beacon
using (m_subscriber = new SubscriberSocket())
using (m_publisher = new PublisherSocket())
using (m_beacon = new NetMQBeacon())
{
// listen to actor commands
m_shim.ReceiveReady += OnShimReady;
// subscribe to all messages
m_subscriber.Subscribe("");
// we bind to a random port, we will later publish this port
// using the beacon
m_randomPort = m_subscriber.BindRandomPort("tcp://*");
Console.WriteLine("Bus subscriber is bound to {0}", m_subscriber.Options.LastEndpoint);
// listen to incoming messages from other publishers, forward them to the shim
m_subscriber.ReceiveReady += OnSubscriberReady;
// configure the beacon to listen on the broadcast port
Console.WriteLine("Beacon is being configured to UDP port {0}", m_broadcastPort);
m_beacon.Configure(m_broadcastPort);
// publishing the random port to all other nodes
Console.WriteLine("Beacon is publishing the Bus subscriber port {0}", m_randomPort);
m_beacon.Publish(m_randomPort.ToString(), TimeSpan.FromSeconds(1));
// Subscribe to all beacon on the port
Console.WriteLine("Beacon is subscribing to all beacons on UDP port {0}", m_broadcastPort);
m_beacon.Subscribe("");
// listen to incoming beacons
m_beacon.ReceiveReady += OnBeaconReady;
// Create a timer to clear dead nodes
NetMQTimer timer = new NetMQTimer(TimeSpan.FromSeconds(1));
timer.Elapsed += ClearDeadNodes;
// Create and configure the poller with all sockets and the timer
m_poller = new NetMQPoller { m_shim, m_subscriber, m_beacon, timer };
// signal the actor that we finished with configuration and
// ready to work
m_shim.SignalOK();
// polling until cancelled
m_poller.Run();
}
}
public void Run(PairSocket shim)
{
m_pipe = shim;
shim.SignalOK();
m_pipe.ReceiveReady += OnPipeReady;
m_pingTimer = new NetMQTimer(interval: TimeSpan.Zero);
m_pingTimer.Elapsed += PingElapsed;
m_pingTimer.Enable = false;
using (m_poller = new NetMQPoller { m_pipe, m_pingTimer })
{
m_poller.Run();
}
// the beacon might never been configured
#if NET35
m_udpSocket?.Close();
#else
m_udpSocket?.Dispose();
#endif
}
public void ReconnectToBrokerIfIsNotReplying()
{
const string hostAddress = "tcp://localhost:5555";
const int timeOutToReconnectInMillis = 7500;
var loggingMessages = new List<string>();
var serviceName = "echo";
var messagesReceivedOnBroker = 0;
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
session.Timeout = TimeSpan.FromMilliseconds(timeOutToReconnectInMillis);
broker.Bind(hostAddress);
broker.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
if (messagesReceivedOnBroker != 0) // doesn't respond if is the first message received!
{
// we expect to receive a 4 Frame message
// [client adrR][e][mdp header][service][request]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
var requestId = msg.Last.ConvertToString(); // get the requestId string
msg.RemoveFrame(msg.Last); // remove the request frame
var request = msg.Last.ConvertToString(); // get the request string
msg.RemoveFrame(msg.Last); // remove the request frame
msg.Append(new NetMQFrame(request + " OK")); // append the reply frame
msg.Append(requestId);
e.Socket.SendMultipartMessage(msg);
}
messagesReceivedOnBroker++;
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
var reply = e.Reply;
Assert.That(reply.FrameCount, Is.EqualTo(1));
Assert.That(reply.First.ConvertToString(), Is.EqualTo("REQUEST OK"));
poller.Stop();
};
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
int timeOutInMillis = timeOutToReconnectInMillis + 3000; // Waits for the timeOut on the client
var timer = new NetMQTimer(timeOutInMillis);
timer.Elapsed += (s, e) =>
{
session.Send(serviceName, requestMessage); // resends the request after timeout
};
poller.Add(timer);
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
session.Send(serviceName, requestMessage);
var result = task.Wait(timeOutToReconnectInMillis * 2);
var numberOfConnects = loggingMessages.FindAll(x => x.Contains("[CLIENT] connecting to broker")).Count;
Assert.IsTrue(numberOfConnects > 1);
}
}
public void SendWrongMDPVersionFromBrokerNoLoggingShouldThrowApplicationException()
{
const string hostAddress = "tcp://localhost:5555";
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// return empty reply
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [REQ ADR][EMPTY]["MDPC00"]["echo"]["REQUEST"][requestId]
var clientAddress = msg.Pop();
msg.Pop(); // forget empty frame
msg.Pop(); // drop the MDP Version Frame
msg.Push("MDPC00"); // insert wrong MDP version
msg.Push(NetMQFrame.Empty);
msg.Push(clientAddress); // reinsert the client's address
e.Socket.SendMultipartMessage(msg);
};
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(broker);
poller.Add(timer);
session.ReplyReady += (s, e) =>
{
Assert.True(e.HasError());
Assert.That(e.Exception.Message, Is.StringContaining("MDP Version mismatch"));
poller.Stop(); // To unlock the Task.Wait()
};
session.FailedRequest += (s, e) =>
{
Assert.True(e.HasError());
Assert.That(e.Exception.Message, Is.StringContaining("MDP Version mismatch"));
poller.Stop(); // To unlock the Task.Wait()
};
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
session.Send("echo", requestMessage);
task.Wait();
}
}
public void SendEmptyReplyFromBrokerWithLoggingShouldThrowApplicationException()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
// setup the counter socket for communication
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
// return empty reply
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [REQ ADR][EMPTY]["MDPC01"]["echo"]["REQUEST"][requestId]
e.Socket.SendMultipartMessage(msg);
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
Assert.That(loggingMessages.Count, Is.EqualTo(3));
Assert.That(loggingMessages[0], Is.EqualTo("[CLIENT] connecting to broker at tcp://localhost:5555"));
Assert.That(loggingMessages[1].Contains("[CLIENT INFO] sending"), Is.True);
Assert.That(loggingMessages[2].Contains("[CLIENT INFO] received"), Is.True);
poller.Stop(); // To unlock the Task.Wait()
};
poller.Add(broker);
var task = Task.Factory.StartNew(() => poller.Run());
// well formed message
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
// correct call
session.Send("echo", requestMessage);
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(timer);
task.Wait();
}
}
public void SendCorrectInputWithLoggingShouldReturnCorrectReply()
{
const string hostAddress = "tcp://localhost:5555";
var loggingMessages = new List<string>();
var serviceName = "echo";
using (var broker = new RouterSocket())
using (var poller = new NetMQPoller())
using (var session = new MDPClientAsync(hostAddress))
{
broker.Bind(hostAddress);
// we need to pick up any message in order to avoid errors
broker.ReceiveReady += (s, e) =>
{
var msg = e.Socket.ReceiveMultipartMessage();
// we expect to receive a 4 Frame message
// [client adrR][e][mdp header][service][request]
if (msg.FrameCount != 6)
Assert.Fail("Message with wrong count of frames {0}", msg.FrameCount);
// REQUEST socket will strip the his address + empty frame
// ROUTER has to add the address prelude in order to identify the correct socket(!)
// [client adr][e][mdp header][service][reply][requestId]
var requestId = msg.Last.ConvertToString(); // get the requestId string
msg.RemoveFrame(msg.Last); // remove the request frame
var request = msg.Last.ConvertToString(); // get the request string
msg.RemoveFrame(msg.Last); // remove the request frame
msg.Append(new NetMQFrame(request + " OK")); // append the reply frame
msg.Append(requestId);
e.Socket.SendMultipartMessage(msg);
};
session.LogInfoReady += (s, e) => loggingMessages.Add(e.Info);
session.ReplyReady += (s, e) =>
{
var reply = e.Reply;
Assert.That(reply.FrameCount, Is.EqualTo(1));
Assert.That(reply.First.ConvertToString(), Is.EqualTo("REQUEST OK"));
poller.Stop();
};
int timeOutInMillis = 10000;
var timer = new NetMQTimer(timeOutInMillis); // Used so it doesn't block if something goes wrong!
timer.Elapsed += (s, e) =>
{
Assert.Fail($"Waited {timeOutInMillis} and had no response from broker");
poller.Stop();
};
poller.Add(broker);
poller.Add(timer);
var task = Task.Factory.StartNew(() => poller.Run());
var requestMessage = new NetMQMessage(new[] { new NetMQFrame("REQUEST") });
session.Send(serviceName, requestMessage);
task.Wait();
Assert.That(loggingMessages.Count, Is.EqualTo(3));
Assert.That(loggingMessages[0], Is.EqualTo("[CLIENT] connecting to broker at tcp://localhost:5555"));
Assert.That(loggingMessages[1].Contains("[CLIENT INFO] sending"), Is.True);
Assert.That(loggingMessages[2].Contains("[CLIENT INFO] received"), Is.True);
}
}
