/// <summary>
/// This thread method continually loops through the set of managed
/// BluetoothConnections, aggregating and dispatching sequences
/// of pending commands from each connection in a round-robin fashion.
/// </summary>
/// <remarks>
/// Notes on scheduling:
/// Step through and process all pending commands for now...
///
/// Should really be doing time slicing because in many situations the next command
/// from a connection may not come in until the last one was completed
///
/// Each connection should maintain it's own device state/config.
/// Depending on how well/whether device states/configs match between connections,
/// we should be able to overlap certain AT commands (like device queries when
/// in INQUIRY/PAGE/SCAN mode) and combine results of others (just did an INQUIRY,
/// so timestamp result and return that result to any other connections asking).
///
/// Should also guarantee that if a single thread exists, it will not be connected,
/// disconnected, etc. It just does what it needs to without interruption
/// </remarks>
private void AggregateAndDispatch()
{
while (true)
{
m_newCommand.WaitOne();
// Check if we are terminating this thread and shutdown
if (m_outstandingConnections.Count == 0)
{
break;
}
if (0 == PendingConnections())
{
continue;
}
BTConnection currentConnection = null;
do
{
BTConnection.BTCmd cmd;
currentConnection = (BTConnection)m_connectionsToBeProcessed[0];
m_connectionsToBeProcessed.RemoveAt(0);
// Execute the command
while (null != (cmd = currentConnection.GetNextCommand()))
{
bool error = true;
m_pp.ApplyPolicy(m_driver, currentConnection, cmd);
try
{
cmd.Execute(currentConnection, m_driver);
error = false;
currentConnection.CmdCompletedCallback(cmd, error);
}
catch
{
// swallow the exception from the user-provided callback
}
}
} while (0 < PendingConnections());
m_pp.ApplyPolicy(m_driver, currentConnection, null);
} // end while
///////////////////////////////////////
// SHUTDOWN
//
// Clear the queue on shutdown
m_connectionsToBeProcessed.Clear();
// Apply default power policy
m_pp.ApplyPolicy(m_driver, null, null);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
conn.Connected = false;
conn.IsMaster = false;
conn.ConnectedToAddr = null;
if (null != this.Address)
{
this.Success = driver.PageScanForAddress(this.Address, Timeout);
}
else
{
this.Success = driver.InquiryAndPageScans(Timeout);
if (this.Success)
{
try
{
this.Address = driver.GetLastConnectedAddress();
}
catch
{
this.Address = null;
}
}
}
conn.Connected = this.Success;
conn.ConnectedToAddr = this.Address;
}
/// <summary>
/// Sets the power state of the provided IPowerState given that the
/// specified BTCmd will be executed next. A null BTCmd indicates that
/// there are no more pending BTCmds to be executed from any connection.
/// </summary>
/// <param name="ips">
/// The IPowerState
/// </param>
/// <param name="conn">
/// The BTConnection for which the BTCmd is being executed.
/// </param>
/// <param name="cmd">
/// The next BTCmd to be executed, or null if there are no pending BTCmds.
/// </param>
public void ApplyPolicy(IPowerState ips, BTConnection conn, BTConnection.BTCmd cmd)
{
lock (this)
{
if (null != cmd)
{ // Dispose of the Timer if it's active, then PARK the chip
if (null != m_powerOffTimer)
{
m_powerOffTimer.Dispose();
m_powerOffTimer = null;
}
PowerState state = PowerState.Park;
while (!ips.SetPowerState(ref state))
{
Thread.Sleep(1);
}
}
else
{ // Then set a Timer that will turn the chip OFF if no new commands in the specified timeout
if (null == conn || !conn.Connected)
{
if (null == m_powerOffTimer)
{
m_powerOffTimer = new Timer(PowerOffTimerFired, ips, c_powerOffTimeout, Timeout.Infinite);
}
}
}
}
}
/// <summary>
/// Sets the power state of the provided IPowerState given that the
/// specified BTCmd will be executed next. A null BTCmd indicates that
/// there are no more pending BTCmds to be executed from any connection.
/// </summary>
/// <param name="ips">
/// The IPowerState
/// </param>
/// <param name="conn">
/// The BTConnection for which the BTCmd is being executed.
/// </param>
/// <param name="cmd">
/// The next BTCmd to be executed, or null if there are no pending BTCmds.
/// </param>
public void ApplyPolicy(IPowerState ips, BTConnection conn, BTConnection.BTCmd cmd)
{
lock (this)
{
if (null != cmd)
{ // Dispose of the Timer if it's active, then PARK the chip
if (null != m_powerOffTimer)
{
m_powerOffTimer.Dispose();
m_powerOffTimer = null;
}
PowerState state = PowerState.Park;
while (!ips.SetPowerState(ref state))
{
Thread.Sleep(1);
}
}
else
{ // Then set a Timer that will turn the chip OFF if no new commands in the specified timeout
if (null == conn || !conn.Connected)
{
if (null == m_powerOffTimer)
{
m_powerOffTimer = new Timer(PowerOffTimerFired, ips, c_powerOffTimeout, Timeout.Infinite);
}
}
}
}
}
/// <summary>
/// Called by a BTConnection after queueing one or more new commands; sets
/// the new command event so that the AggregateAndDispatch thread will wake
/// up and execute the commands.
/// </summary>
/// <param name="conn">
/// The calling BTConnection
/// </param>
internal void OnNewCommand(BTConnection conn)
{
lock (m_connectionsToBeProcessed)
{
m_connectionsToBeProcessed.Add(conn);
}
m_newCommand.Set();
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Devices = driver.Inquiry();
if (null != Devices)
{
Success = true;
}
}
public override void Execute(BTConnection conn, BTDriver driver)
{
NumReceived = driver.Receive(ref Data, Timeout);
Success = (0 <= NumReceived);
// Check for disconnect
if (!Success)
{
conn.Connected = false;
}
}
public BTConnection CreateBTConnection()
{
if (m_disposed)
{
throw new InvalidOperationException("Manager was disposed");
}
BTConnection conn = new BTConnection(this);
m_outstandingConnections.Add(conn);
return(conn);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
if (null != Data)
{
NumSent = driver.Send(Data);
Success = (0 <= NumSent);
// Check for disconnect
if (!Success)
{
conn.Connected = false;
}
}
}
public override void Execute(BTConnection conn, BTDriver driver)
{
conn.Connected = false;
conn.IsMaster = true;
conn.ConnectedToAddr = null;
if (null != Address)
{
Success = driver.PageAddress(Address, Timeout);
conn.Connected = this.Success;
conn.IsMaster = true;
conn.ConnectedToAddr = this.Address;
}
}
public override void Execute(BTConnection conn, BTDriver driver)
{
NumReceived = driver.Receive(ref Data, Timeout);
Success = (0 <= NumReceived);
// Check for disconnect
if (!Success) conn.Connected = false;
}
public override void Execute(BTConnection conn, BTDriver driver)
{
this.Success = driver.Disconnect();
conn.Connected = !this.Success;
}
internal void RemoveBTConnection(BTConnection conn)
{
m_outstandingConnections.Remove(conn);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.InquiryScan(Timeout);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.CheckDevicePresent();
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.SetPassKey(PassKey);
}
public abstract void Execute(BTConnection conn, BTDriver driver);
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.SetPassKey(PassKey);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.SetFriendlyDeviceName(Name);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
this.Success = driver.Disconnect();
conn.Connected = !this.Success;
}
public override void Execute(BTConnection conn, BTDriver driver)
{
if (null != Data)
{
NumSent = driver.Send(Data);
Success = (0 <= NumSent);
// Check for disconnect
if (!Success) conn.Connected = false;
}
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.SetFriendlyDeviceName(Name);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.CheckDevicePresent();
}
public abstract void Execute(BTConnection conn, BTDriver driver);
internal void RemoveBTConnection(BTConnection conn)
{
m_outstandingConnections.Remove(conn);
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Devices = driver.Inquiry();
if (null != Devices) Success = true;
}
public override void Execute(BTConnection conn, BTDriver driver)
{
conn.Connected = false;
conn.IsMaster = false;
conn.ConnectedToAddr = null;
if (null != this.Address)
{
this.Success = driver.PageScanForAddress(this.Address, Timeout);
}
else
{
this.Success = driver.InquiryAndPageScans(Timeout);
if (this.Success)
{
try
{
this.Address = driver.GetLastConnectedAddress();
}
catch
{
this.Address = null;
}
}
}
conn.Connected = this.Success;
conn.ConnectedToAddr = this.Address;
}
public BTConnection CreateBTConnection()
{
if (m_disposed) throw new InvalidOperationException("Manager was disposed");
BTConnection conn = new BTConnection(this);
m_outstandingConnections.Add(conn);
return conn;
}
public override void Execute(BTConnection conn, BTDriver driver)
{
conn.Connected = false;
conn.IsMaster = true;
conn.ConnectedToAddr = null;
if (null != Address)
{
Success = driver.PageAddress(Address, Timeout);
conn.Connected = this.Success;
conn.IsMaster = true;
conn.ConnectedToAddr = this.Address;
}
}
/// <summary>
/// Called by a BTConnection after queueing one or more new commands; sets
/// the new command event so that the AggregateAndDispatch thread will wake
/// up and execute the commands.
/// </summary>
/// <param name="conn">
/// The calling BTConnection
/// </param>
internal void OnNewCommand(BTConnection conn)
{
lock (m_connectionsToBeProcessed)
{
m_connectionsToBeProcessed.Add(conn);
}
m_newCommand.Set();
}
public override void Execute(BTConnection conn, BTDriver driver)
{
Success = driver.InquiryScan(Timeout);
}
