public IVisio.Shape RenderPie(IVisio.Page page)
{
if (this.Angle == 0.0)
{
var p1 = this.GetPointAtRadius(this.Center, this.Radius, this.SectorStartAngle);
return(page.DrawLine(this.Center, p1));
}
else if (this.Angle >= 2 * System.Math.PI)
{
var A = this.Center.Add(-this.Radius, -this.Radius);
var B = this.Center.Add(this.Radius, this.Radius);
var rect = new Drawing.Rectangle(A, B);
var shape = page.DrawOval(rect);
return(shape);
}
else
{
int degree;
var pie_bez = this.GetShapeBezierForPie(out degree);
// Render the bezier
var doubles_array = Drawing.Point.ToDoubles(pie_bez).ToArray();
var pie_slice = page.DrawBezier(doubles_array, (short)degree, 0);
return(pie_slice);
}
}
public IVisio.Shape RenderDoughnut(IVisio.Page page)
{
double total_angle = this.Angle;
if (total_angle == 0.0)
{
var p1 = this.GetPointAtRadius(this.Center, this.SectorStartAngle, this.InnerRadius);
var p2 = this.GetPointAtRadius(this.Center, this.SectorStartAngle, this.Radius);
var shape = page.DrawLine(p1, p2);
return(shape);
}
else if (total_angle >= System.Math.PI)
{
var outer_radius_point = new Drawing.Point(this.Radius, this.Radius);
var C = this.Center - outer_radius_point;
var D = this.Center + outer_radius_point;
var outer_rect = new Drawing.Rectangle(C, D);
var inner_radius_point = new Drawing.Point(this.InnerRadius, this.InnerRadius);
var A = this.Center - inner_radius_point - C;
var B = this.Center + inner_radius_point - C;
var inner_rect = new Drawing.Rectangle(A, B);
var shape = page.DrawOval(outer_rect);
shape.DrawOval(inner_rect.Left, inner_rect.Bottom, inner_rect.Right, inner_rect.Top);
return(shape);
}
else
{
int degree;
var thickarc = this.GetShapeBezierForDoughnut(out degree);
// Render the bezier
var doubles_array = Drawing.Point.ToDoubles(thickarc).ToArray();
var pie_slice = page.DrawBezier(doubles_array, (short)degree, 0);
return(pie_slice);
}
}
public void Render(IVisio.Page page)
{
this.TotalMarginWidth = this.Rectangle.Width * (0.10);
int num_points = this.DataPoints.Count;
double bar_spacing = num_points > 1 ? (this.Rectangle.Width - this.TotalBarWidth) / num_points : 0.0;
// Calculate min & max which will be used many times later
double max = this.DataPoints.Select(i => i.Value).Max();
double min = this.DataPoints.Select(i => i.Value).Min();
var range = ChartUtil.GetValueRangeDistance(min, max);
// Determine the leftmost part of the drawing area
double base_x = this.Rectangle.Left + (this.TotalMarginWidth / 2.0);
// Determine the baseline height a.k.a the y axis location
double base_y = this.Rectangle.Bottom;
if (min < 0.0)
{
// if the min value is negative then we have to "raise" the baseline to accomodate it
base_y += System.Math.Abs(this.Rectangle.Height * (min / range));
}
var category_axis_start_point = new Geometry.Point(this.Rectangle.Left, base_y);
var category_axis_end_point = new Geometry.Point(this.Rectangle.Right, base_y);
var category_axis_shape = page.DrawLine(category_axis_start_point, category_axis_end_point);
double cur_x = base_x;
var points = new List <Geometry.Point>();
for (int i = 0; i < this.DataPoints.Count; i++)
{
if (i == 0)
{
points.Add(new Geometry.Point(cur_x, base_y));
}
var p = this.DataPoints[i];
var value_height = System.Math.Abs(this.Rectangle.Height * (p.Value / range));
if (p.Value >= 0.0)
{
points.Add(new Geometry.Point(cur_x, base_y + value_height));
}
else
{
points.Add(new Geometry.Point(cur_x, base_y - value_height));
}
if (i == this.DataPoints.Count - 1)
{
points.Add(new Geometry.Point(cur_x, base_y));
}
cur_x += bar_spacing;
}
points.Add(new Geometry.Point(base_x, base_y));
var area_shape = page.DrawPolyline(points);
var allshapes = this.DataPoints.Select(dp => dp.VisioShape).Where(s => s != null).ToList();
allshapes.Add(category_axis_shape);
ChartUtil.GroupShapesIfNeeded(page, allshapes);
}
public void Render(IVisio.Page page)
{
this.TotalMarginWidth = this.Rectangle.Width * (0.10);
this.TotalBarSpacingWidth = this.Rectangle.Width * (0.10);
this.TotalBarWidth = this.Rectangle.Width * (0.80);
int num_points = this.DataPoints.Count;
double bar_spacing = num_points > 1 ? this.TotalBarSpacingWidth / num_points : 0.0;
double bar_width = num_points > 0 ? this.TotalBarWidth / num_points : this.TotalBarWidth;
double cur_x = this.Rectangle.Left + (this.TotalMarginWidth / 2.0);
double max = this.DataPoints.Select(i => i.Value).Max();
double min = this.DataPoints.Select(i => i.Value).Min();
var range = ChartUtil.GetValueRangeDistance(min, max);
double base_y = this.Rectangle.Bottom;
if (min < 0.0)
{
base_y += System.Math.Abs(this.Rectangle.Height * (min / range));
}
var category_axis_start_point = new Geometry.Point(this.Rectangle.Left, base_y);
var category_axis_end_point = new Geometry.Point(this.Rectangle.Right, base_y);
var category_axis_shape = page.DrawLine(category_axis_start_point, category_axis_end_point);
foreach (var p in this.DataPoints)
{
var value_height = System.Math.Abs(this.Rectangle.Height * (p.Value / range));
Geometry.Point bar_p0;
Geometry.Point bar_p1;
if (p.Value >= 0.0)
{
bar_p0 = new Geometry.Point(cur_x, base_y);
bar_p1 = new Geometry.Point(cur_x + bar_width, base_y + value_height);
}
else
{
bar_p0 = new Geometry.Point(cur_x, base_y - value_height);
bar_p1 = new Geometry.Point(cur_x + bar_width, base_y);
}
var bar_rect = new Geometry.Rectangle(bar_p0, bar_p1);
var shape = page.DrawRectangle(bar_rect);
p.VisioShape = shape;
if (p.Label != null)
{
shape.Text = p.Label;
}
cur_x += bar_width + bar_spacing;
}
var allshapes = this.DataPoints.Select(dp => dp.VisioShape).Where(s => s != null).ToList();
allshapes.Add(category_axis_shape);
ChartUtil.GroupShapesIfNeeded(page, allshapes);
}
/// <summary>
/// This method is drawing schema for single cable
/// </summary>
/// <param name="aPage">page to draw on</param>
/// <param name="aCableInfo">information about cable to draw</param>
/// <param name="aPosY">vertical position in which schema should start</param>
/// <returns>ertical position after drawing</returns>
private double DrawCable(Visio.Page aPage, CableInfo aCableInfo, double aPosY)
{
if (aCableInfo.CoreNo == 0)
{
aCableInfo.CoreInfo.Add(new CoreInfo(Database.DbElement.GetElement(), aCableInfo));
}
double _cableHeight = aCableInfo.CoreNo * mCoreHeight;
Visio.Shape _newShape = aPage.DrawLine(mCablePosX, aPosY - _cableHeight / 2.0, mCablePosX + mCableWidth, aPosY - _cableHeight / 2.0);
SetTextProperties(_newShape, aCableInfo.CableName + Environment.NewLine + aCableInfo.ComponentName, FONT_SIZE, (int)Visio.VisCellVals.visHorzCenter);
_newShape = aPage.DrawLine(mCablePosX, aPosY, mCablePosX, aPosY - _cableHeight);
_newShape = aPage.DrawLine(mCablePosX + mCableWidth, aPosY, mCablePosX + mCableWidth, aPosY - _cableHeight);
int _lastBeginEqui = 0, _lastEndEqui = 0, _lastBeginElconn = 0, _lastEndElconn = 0, _current = 0;
string _lastBeginEquiName = string.Empty, _lastEndEquiName = string.Empty, _lastBeginElconnName = string.Empty, _lastEndElconnName = string.Empty;
foreach (CoreInfo _core in aCableInfo.CoreInfo)
{
//draw core boxes
_newShape = aPage.DrawRectangle(mCablePosX - mCoreWidth - mSpaceBetween, aPosY - _current * mCoreHeight, mCablePosX - mSpaceBetween, aPosY - (_current + 1) * mCoreHeight);
SetTextProperties(_newShape, _core.CoreName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_newShape = aPage.DrawRectangle(mCablePosX + mCableWidth + mSpaceBetween, aPosY - _current * mCoreHeight, mCablePosX + mCableWidth + mSpaceBetween + mCoreWidth, aPosY - (_current + 1) * mCoreHeight);
SetTextProperties(_newShape, _core.CoreName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
//draw pin boxes
_newShape = aPage.DrawRectangle(mCablePosX - (mCoreWidth + mSpaceBetween) * 2, aPosY - _current * mCoreHeight, mCablePosX - mCoreWidth - mSpaceBetween * 2, aPosY - (_current + 1) * mCoreHeight);
SetTextProperties(_newShape, _core.StartPin, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_newShape = aPage.DrawRectangle(mCablePosX + mCableWidth + mSpaceBetween * 2 + mCoreWidth, aPosY - _current * mCoreHeight, mCablePosX + mCableWidth + (mSpaceBetween + mCoreWidth) * 2, aPosY - (_current + 1) * mCoreHeight);
SetTextProperties(_newShape, _core.EndPin, "6pt", (int)Visio.VisCellVals.visHorzCenter);
//check/draw elconns
if (_core.StartElconn == string.Empty || _lastBeginElconnName != _core.StartElconn)
{
if (_current > 0)
{
double _posX = mCablePosX - (mSpaceBetween + mCoreWidth) * 2;
double _posY = aPosY - _lastBeginElconn * mCoreHeight;
//draw elconn
_newShape = aPage.DrawRectangle(_posX - mElconnWidth, _posY, _posX, _posY - (_current - _lastBeginElconn) * mCoreHeight);
SetTextProperties(_newShape, _lastBeginElconnName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_lastBeginElconn = _current;
}
_lastBeginElconnName = _core.StartElconn;
}
if (_core.EndElconn == string.Empty || _lastEndElconnName != _core.EndElconn)
{
if (_current > 0)
{
//draw elconn
double _posX = mCablePosX + (mSpaceBetween + mCoreWidth) * 2 + mCableWidth;
double _posY = aPosY - _lastEndElconn * mCoreHeight;
//draw elconn
_newShape = aPage.DrawRectangle(_posX, _posY, _posX + mElconnWidth, _posY - (_current - _lastEndElconn) * mCoreHeight);
SetTextProperties(_newShape, _lastEndElconnName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_lastEndElconn = _current;
}
_lastEndElconnName = _core.EndElconn;
}
//check/draw equips
if (_core.StartEqui == string.Empty || _lastBeginEquiName != _core.StartEqui)
{
if (_current > 0)
{
//draw equi
double _posX = mCablePosX - (mSpaceBetween + mCoreWidth) * 2 - mElconnWidth;
double _posY = aPosY - _lastBeginEqui * mCoreHeight;
_newShape = aPage.DrawRectangle(_posX - mEquiWidth, _posY, _posX, _posY - (_current - _lastBeginEqui) * mCoreHeight);
SetTextProperties(_newShape, _lastBeginEquiName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_lastBeginEqui = _current;
}
_lastBeginEquiName = _core.StartEqui;
}
if (_core.EndEqui == string.Empty || _lastEndEquiName != _core.EndEqui)
{
if (_current > 0)
{
//draw equi
double _posX = mCablePosX + (mSpaceBetween + mCoreWidth) * 2 + mCableWidth + mElconnWidth;
double _posY = aPosY - _lastEndEqui * mCoreHeight;
_newShape = aPage.DrawRectangle(_posX, _posY, _posX + mEquiWidth, _posY - (_current - _lastEndEqui) * mCoreHeight);
SetTextProperties(_newShape, _lastEndEquiName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_lastEndEqui = _current;
}
_lastEndEquiName = _core.EndEqui;
}
_current++;
}
//draw last elconns
double _pX = mCablePosX - (mSpaceBetween + mCoreWidth) * 2;
double _pY = aPosY - _lastBeginElconn * mCoreHeight;
_newShape = aPage.DrawRectangle(_pX - mElconnWidth, _pY, _pX, _pY - (_current - _lastBeginElconn) * mCoreHeight);
SetTextProperties(_newShape, _lastBeginElconnName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_pX = mCablePosX + (mSpaceBetween + mCoreWidth) * 2 + mCableWidth;
_pY = aPosY - _lastEndElconn * mCoreHeight;
_newShape = aPage.DrawRectangle(_pX, _pY, _pX + mElconnWidth, _pY - (_current - _lastEndElconn) * mCoreHeight);
SetTextProperties(_newShape, _lastEndElconnName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
//draw last equips
_pX = mCablePosX - (mSpaceBetween + mCoreWidth) * 2 - mElconnWidth;
_pY = aPosY - _lastBeginEqui * mCoreHeight;
_newShape = aPage.DrawRectangle(_pX - mEquiWidth, _pY, _pX, _pY - (_current - _lastBeginEqui) * mCoreHeight);
SetTextProperties(_newShape, _lastBeginEquiName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
_pX = mCablePosX + (mSpaceBetween + mCoreWidth) * 2 + mCableWidth + mElconnWidth;
_pY = aPosY - _lastEndEqui * mCoreHeight;
_newShape = aPage.DrawRectangle(_pX, _pY, _pX + mEquiWidth, _pY - (_current - _lastEndEqui) * mCoreHeight);
SetTextProperties(_newShape, _lastEndEquiName, "6pt", (int)Visio.VisCellVals.visHorzCenter);
return(aPosY - _cableHeight);
}