public void WriteRst(ResetStatusCode code)
{
if (Closed)
return;
var frame = new RstStreamFrame(_id, code);
_writeQueue.WriteFrame(frame);
if (OnFrameSent != null)
{
OnFrameSent(this, new FrameSentEventArgs(frame));
}
}
private void HandleRstFrame(RstStreamFrame resetFrame, out Http2Stream stream)
{
stream = GetStream(resetFrame.StreamId);
//Spec 06 tells that impl MUST not answer with rst on rst to avoid loop.
if (stream != null)
{
Http2Logger.LogDebug("RST frame with code {0} for id {1}", resetFrame.StatusCode,
resetFrame.StreamId);
stream.Dispose(ResetStatusCode.None);
}
//Do not signal an error because (06)
//WINDOW_UPDATE [WINDOW_UPDATE], PRIORITY [PRIORITY], or RST_STREAM
//[RST_STREAM] frames can be received in this state for a short
//period after a frame containing an END_STREAM flag is sent.
}
/// <summary>
/// Dispatches the incoming frame.
/// </summary>
/// <param name="frame">The frame.</param>
/// <exception cref="System.NotImplementedException"></exception>
private void DispatchIncomingFrame(Frame frame)
{
Http2Stream stream = null;
try
{
if (frame.PayloadLength > Constants.MaxFramePayloadSize)
{
throw new ProtocolError(ResetStatusCode.FrameSizeError,
String.Format("Frame too large: Type: {0} {1}", frame.FrameType,
frame.PayloadLength));
}
/* 12 -> 6.5
A SETTINGS frame MUST be sent by both endpoints at the start of a
connection, and MAY be sent at any other time by either endpoint over
the lifetime of the connection.*/
if (frame.FrameType != FrameType.Settings && !_wasSettingsReceived)
{
throw new ProtocolError(ResetStatusCode.ProtocolError,
"Settings frame was not the first frame in the session");
}
Http2Logger.LogDebug("Incoming frame: " + frame.FrameType);
switch (frame.FrameType)
{
case FrameType.Headers:
HandleHeaders(frame as HeadersFrame, out stream);
break;
case FrameType.Continuation:
HandleContinuation(frame as ContinuationFrame, out stream);
break;
case FrameType.Priority:
HandlePriority(frame as PriorityFrame, out stream);
break;
case FrameType.RstStream:
HandleRstFrame(frame as RstStreamFrame, out stream);
break;
case FrameType.Data:
HandleDataFrame(frame as DataFrame, out stream);
break;
case FrameType.Ping:
HandlePingFrame(frame as PingFrame);
break;
case FrameType.Settings:
HandleSettingsFrame(frame as SettingsFrame);
if (!(frame as SettingsFrame).IsAck)
{
// sending ACK settings
WriteSettings(new SettingsPair[0], true);
}
break;
case FrameType.WindowUpdate:
HandleWindowUpdateFrame(frame as WindowUpdateFrame, out stream);
break;
case FrameType.GoAway:
HandleGoAwayFrame(frame as GoAwayFrame);
break;
case FrameType.PushPromise:
HandlePushPromiseFrame(frame as PushPromiseFrame, out stream);
if (stream != null) //This means that sequence is complete
{
_promisedResources.Add(stream.Id, stream.Headers.GetValue(CommonHeaders.Path));
}
break;
case FrameType.AltSvc:
HandleAltSvcFrame(frame);
break;
case FrameType.Blocked:
HandleBlockedFrame(frame);
break;
default:
/* 12 -> 4.1
Implementations MUST treat the receipt of an unknown frame type
(any frame types not defined in this document) as a connection
error of type PROTOCOL_ERROR. */
throw new ProtocolError(ResetStatusCode.ProtocolError, "Unknown frame type detected");
}
_lastFrame = frame;
if (frame is IEndStreamFrame && ((IEndStreamFrame) frame).IsEndStream)
{
//Tell the stream that it was the last frame
Http2Logger.LogDebug("Final frame received for stream id=" + stream.Id);
stream.HalfClosedRemote = true;
//Promised resource has been pushed
if (_promisedResources.ContainsKey(stream.Id))
_promisedResources.Remove(stream.Id);
}
if (stream == null || OnFrameReceived == null)
return;
OnFrameReceived(this, new FrameReceivedEventArgs(stream, frame));
stream.FramesReceived++;
}
//09
//5.1. Stream States
//An endpoint MUST NOT send frames on a closed stream. An endpoint
//that receives a frame after receiving a RST_STREAM [RST_STREAM] or
//a frame containing a END_STREAM flag on that stream MUST treat
//that as a stream error (Section 5.4.2) of type STREAM_CLOSED
//[STREAM_CLOSED].
catch (Http2StreamNotFoundException ex)
{
Http2Logger.LogDebug("Frame for already Closed stream with stream id={0}", ex.Id);
var rstFrame = new RstStreamFrame(ex.Id, ResetStatusCode.StreamClosed);
Http2Logger.LogDebug("Sending RST_STREAM frame: stream id={0}, status code={1}",
rstFrame.StreamId, rstFrame.StatusCode);
_writeQueue.WriteFrame(rstFrame);
stream.WasRstSent = true;
}
catch (CompressionError ex)
{
//The endpoint is unable to maintain the compression context for the connection.
Http2Logger.LogError("Compression error occurred: " + ex.Message);
Close(ResetStatusCode.CompressionError);
}
catch (ProtocolError pEx)
{
Http2Logger.LogError("Protocol error occurred: " + pEx.Message);
Close(pEx.Code);
}
catch (MaxConcurrentStreamsLimitException)
{
//Remote side tries to open more streams than allowed
Dispose();
}
catch (Exception ex)
{
Http2Logger.LogError("Unknown error occurred: " + ex.Message);
Close(ResetStatusCode.InternalError);
}
}
private void HandleRstFrame(RstStreamFrame resetFrame, out Http2Stream stream)
{
//spec 09
//6.4. RST_STREAM
//RST_STREAM frames MUST be associated with a stream. If a RST_STREAM
//frame is received with a stream identifier of 0x0, the recipient MUST
//treat this as a connection error (Section 5.4.1) of type
//PROTOCOL_ERROR.
if (resetFrame.StreamId == 0)
{
throw new ProtocolError(ResetStatusCode.ProtocolError, "resetFrame with id = 0");
}
stream = GetStream(resetFrame.StreamId);
//09 -> 5.4.2. Stream Error Handling
//An endpoint MUST NOT send a RST_STREAM in response to an RST_STREAM
//frame, to avoid looping.
if (stream == null)
return;
Http2Logger.LogDebug("RST frame with code {0} for id {1}", resetFrame.StatusCode,
resetFrame.StreamId);
stream.Dispose(ResetStatusCode.None);
//09 -> 5.1. Stream States
//WINDOW_UPDATE, PRIORITY, or RST_STREAM frames can be received in
//this state for a short period after a DATA or HEADERS frame
//containing an END_STREAM flag is sent. Until the remote peer
//receives and processes the frame bearing the END_STREAM flag, it
//might send frame of any of these types. Endpoints MUST ignore
//WINDOW_UPDATE, PRIORITY, or RST_STREAM frames received in this
//state, though endpoints MAY choose to treat frames that arrive a
//significant time after sending END_STREAM as a connection error
//(Section 5.4.1) of type PROTOCOL_ERROR.
}
private void HandleRstFrame(RstStreamFrame resetFrame, out Http2Stream stream)
{
Http2Logger.LogDebug("RST_STREAM frame: stream id={0}, status code={1}",
resetFrame.StreamId, resetFrame.StatusCode);
/* 12 -> 6.4
RST_STREAM frames MUST be associated with a stream. If a RST_STREAM
frame is received with a stream identifier of 0x0, the recipient MUST
treat this as a connection error of type PROTOCOL_ERROR. */
if (resetFrame.StreamId == 0)
throw new ProtocolError(ResetStatusCode.ProtocolError, "Rst frame with stream id=0");
stream = GetStream(resetFrame.StreamId);
if (stream.Closed)
{
/* 12 -> 5.4.2
An endpoint MUST NOT send a RST_STREAM in response to an RST_STREAM
frame, to avoid looping. */
if (!stream.WasRstSent)
{
throw new Http2StreamNotFoundException(resetFrame.StreamId);
}
return;
}
if (!(stream.ReservedRemote || stream.Opened || stream.HalfClosedLocal))
throw new ProtocolError(ResetStatusCode.ProtocolError, "Rst for non opened or reserved stream");
stream.Close(ResetStatusCode.None);
}
